From a62bf3afe1732a8c111bb8687da4f536c86f73ec Mon Sep 17 00:00:00 2001 From: iceman1001 Date: Mon, 13 Jul 2015 00:04:16 +0200 Subject: [PATCH] @frederikmoellers EPA changes, with APDU for ISO14443b support --- armsrc/epa.c | 63 +++++++++++++++++++----- armsrc/epa.h | 2 +- armsrc/iso14443b.c | 116 +++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 163 insertions(+), 18 deletions(-) diff --git a/armsrc/epa.c b/armsrc/epa.c index 8cc0e4b2..737e633f 100644 --- a/armsrc/epa.c +++ b/armsrc/epa.c @@ -12,10 +12,11 @@ //----------------------------------------------------------------------------- #include "iso14443a.h" +#include "iso14443b.h" #include "epa.h" #include "cmd.h" -// Protocol and Parameter Selection Request +// Protocol and Parameter Selection Request for ISO 14443 type A cards // use regular (1x) speed in both directions // CRC is already included static const uint8_t pps[] = {0xD0, 0x11, 0x00, 0x52, 0xA6}; @@ -100,6 +101,28 @@ static struct { // lengths of the replay APDUs static uint8_t apdu_lengths_replay[5]; +// type of card (ISO 14443 A or B) +static char iso_type = 0; + +//----------------------------------------------------------------------------- +// Wrapper for sending APDUs to type A and B cards +//----------------------------------------------------------------------------- +int EPA_APDU(uint8_t *apdu, size_t length, uint8_t *response) +{ + switch(iso_type) + { + case 'a': + return iso14_apdu(apdu, (uint16_t) length, response); + break; + case 'b': + return iso14443b_apdu(apdu, length, response); + break; + default: + return 0; + break; + } +} + //----------------------------------------------------------------------------- // Closes the communication channel and turns off the field //----------------------------------------------------------------------------- @@ -107,6 +130,7 @@ void EPA_Finish() { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); + iso_type = 0; } //----------------------------------------------------------------------------- @@ -204,26 +228,26 @@ int EPA_Read_CardAccess(uint8_t *buffer, size_t max_length) int rapdu_length = 0; // select the file EF.CardAccess - rapdu_length = iso14_apdu((uint8_t *)apdu_select_binary_cardaccess, + rapdu_length = EPA_APDU((uint8_t *)apdu_select_binary_cardaccess, sizeof(apdu_select_binary_cardaccess), response_apdu); - if (rapdu_length != 6 + if (rapdu_length < 6 || response_apdu[rapdu_length - 4] != 0x90 || response_apdu[rapdu_length - 3] != 0x00) { - Dbprintf("epa - no select cardaccess"); + DbpString("Failed to select EF.CardAccess!"); return -1; } // read the file - rapdu_length = iso14_apdu((uint8_t *)apdu_read_binary, + rapdu_length = EPA_APDU((uint8_t *)apdu_read_binary, sizeof(apdu_read_binary), response_apdu); if (rapdu_length <= 6 || response_apdu[rapdu_length - 4] != 0x90 || response_apdu[rapdu_length - 3] != 0x00) { - Dbprintf("epa - no read cardaccess"); + Dbprintf("Failed to read EF.CardAccess!"); return -1; } @@ -338,7 +362,7 @@ int EPA_PACE_Get_Nonce(uint8_t requested_length, uint8_t *nonce) // send it uint8_t response_apdu[262]; - int send_return = iso14_apdu(apdu, + int send_return = EPA_APDU(apdu, sizeof(apdu), response_apdu); // check if the command succeeded @@ -409,7 +433,7 @@ int EPA_PACE_MSE_Set_AT(pace_version_info_t pace_version_info, uint8_t password) apdu[4] = apdu_length - 5; // send it uint8_t response_apdu[6]; - int send_return = iso14_apdu(apdu, + int send_return = EPA_APDU(apdu, apdu_length, response_apdu); // check if the command succeeded @@ -469,7 +493,7 @@ void EPA_PACE_Replay(UsbCommand *c) // now replay the data and measure the timings for (int i = 0; i < sizeof(apdu_lengths_replay); i++) { StartCountUS(); - func_return = iso14_apdu(apdus_replay[i].data, + func_return = EPA_APDU(apdus_replay[i].data, apdu_lengths_replay[i], response_apdu); timings[i] = GetCountUS(); @@ -501,18 +525,33 @@ int EPA_Setup() uint8_t pps_response_par[1]; iso14a_card_select_t card_select_info; + // first, look for type A cards // power up the field iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); // select the card return_code = iso14443a_select_card(uid, &card_select_info, NULL); - if (return_code != 1) { - return 1; - } + if (return_code == 1) { // send the PPS request ReaderTransmit((uint8_t *)pps, sizeof(pps), NULL); return_code = ReaderReceive(pps_response, pps_response_par); if (return_code != 3 || pps_response[0] != 0xD0) { return return_code == 0 ? 2 : return_code; } + Dbprintf("ISO 14443 Type A"); + iso_type = 'a'; return 0; + } + + // if we're here, there is no type A card, so we look for type B + // power up the field + iso14443b_setup(); + // select the card + return_code = iso14443b_select_card(); + if (return_code == 1) { + Dbprintf("ISO 14443 Type B"); + iso_type = 'b'; + return 0; + } + Dbprintf("No card found."); + return 1; } diff --git a/armsrc/epa.h b/armsrc/epa.h index 0c580205..d2ebed57 100644 --- a/armsrc/epa.h +++ b/armsrc/epa.h @@ -19,7 +19,7 @@ typedef struct { uint8_t parameter_id; } pace_version_info_t; -// note: EPA_PACE_Collect_Nonce is declared in apps.h +// note: EPA_PACE_Collect_Nonce and EPA_PACE_Replay are declared in apps.h // general functions void EPA_Finish(); diff --git a/armsrc/iso14443b.c b/armsrc/iso14443b.c index db7f7539..250be30f 100644 --- a/armsrc/iso14443b.c +++ b/armsrc/iso14443b.c @@ -16,10 +16,13 @@ #include "iso14443crc.h" -#define RECEIVE_SAMPLES_TIMEOUT 200000 -#define ISO14443B_DMA_BUFFER_SIZE 512 +#define RECEIVE_SAMPLES_TIMEOUT 0x0003FFFF +#define ISO14443B_DMA_BUFFER_SIZE 256 uint8_t PowerOn = TRUE; +// PCB Block number for APDUs +static uint8_t pcb_blocknum = 0; + //============================================================================= // An ISO 14443 Type B tag. We listen for commands from the reader, using // a UART kind of thing that's implemented in software. When we get a @@ -636,6 +639,7 @@ static RAMFUNC int Handle14443bSamplesDemod(int ci, int cq) if(Demod.posCount < 10*2) { // low phase of SOF too short (< 9 etu). Note: spec is >= 10, but FPGA tends to "smear" edges Demod.state = DEMOD_UNSYNCD; } else { + LED_C_ON(); // Got SOF Demod.state = DEMOD_AWAITING_START_BIT; Demod.posCount = 0; Demod.len = 0; @@ -693,7 +697,6 @@ static RAMFUNC int Handle14443bSamplesDemod(int ci, int cq) Demod.bitCount++; if(Demod.bitCount == 10) { - LED_C_ON(); uint16_t s = Demod.shiftReg; if((s & 0x200) && !(s & 0x001)) { // stop bit == '1', start bit == '0' uint8_t b = (s >> 1); @@ -809,7 +812,7 @@ static void GetSamplesFor14443bDemod(int n, bool quiet) AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; - if (!quiet) { + if (!quiet && Demod.len == 0) { Dbprintf("max behindby = %d, samples = %d, gotFrame = %d, Demod.len = %d, Demod.sumI = %d, Demod.sumQ = %d", max, samples, @@ -837,6 +840,9 @@ static void TransmitFor14443b(void) FpgaSetupSsc(); + // Start the timer + StartCountSspClk(); + while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { AT91C_BASE_SSC->SSC_THR = 0xff; } @@ -950,6 +956,99 @@ static void CodeAndTransmit14443bAsReader(const uint8_t *cmd, int len) } } +/* Sends an APDU to the tag + * TODO: check CRC and preamble + */ +int iso14443b_apdu(uint8_t const *message, size_t message_length, uint8_t *response) +{ + uint8_t message_frame[message_length + 4]; + // PCB + message_frame[0] = 0x0A | pcb_blocknum; + pcb_blocknum ^= 1; + // CID + message_frame[1] = 0; + // INF + memcpy(message_frame + 2, message, message_length); + // EDC (CRC) + ComputeCrc14443(CRC_14443_B, message_frame, message_length + 2, &message_frame[message_length + 2], &message_frame[message_length + 3]); + // send + CodeAndTransmit14443bAsReader(message_frame, message_length + 4); + // get response + GetSamplesFor14443bDemod(RECEIVE_SAMPLES_TIMEOUT*100, TRUE); + if(Demod.len < 3) + { + return 0; + } + // TODO: Check CRC + // copy response contents + if(response != NULL) + { + memcpy(response, Demod.output, Demod.len); + } + return Demod.len; +} + +/* Perform the ISO 14443 B Card Selection procedure + * Currently does NOT do any collision handling. + * It expects 0-1 cards in the device's range. + * TODO: Support multiple cards (perform anticollision) + * TODO: Verify CRC checksums + */ +int iso14443b_select_card() +{ + // WUPB command (including CRC) + // Note: WUPB wakes up all tags, REQB doesn't wake up tags in HALT state + static const uint8_t wupb[] = { 0x05, 0x00, 0x08, 0x39, 0x73 }; + // ATTRIB command (with space for CRC) + uint8_t attrib[] = { 0x1D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00}; + + // first, wake up the tag + CodeAndTransmit14443bAsReader(wupb, sizeof(wupb)); + GetSamplesFor14443bDemod(RECEIVE_SAMPLES_TIMEOUT, TRUE); + // ATQB too short? + if (Demod.len < 14) + { + return 2; + } + + // select the tag + // copy the PUPI to ATTRIB + memcpy(attrib + 1, Demod.output + 1, 4); + /* copy the protocol info from ATQB (Protocol Info -> Protocol_Type) into + ATTRIB (Param 3) */ + attrib[7] = Demod.output[10] & 0x0F; + ComputeCrc14443(CRC_14443_B, attrib, 9, attrib + 9, attrib + 10); + CodeAndTransmit14443bAsReader(attrib, sizeof(attrib)); + GetSamplesFor14443bDemod(RECEIVE_SAMPLES_TIMEOUT, TRUE); + // Answer to ATTRIB too short? + if(Demod.len < 3) + { + return 2; + } + // reset PCB block number + pcb_blocknum = 0; + return 1; +} + +// Set up ISO 14443 Type B communication (similar to iso14443a_setup) +void iso14443b_setup() { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + BigBuf_free(); + // Set up the synchronous serial port + FpgaSetupSsc(); + // connect Demodulated Signal to ADC: + SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + + // Signal field is on with the appropriate LED + LED_D_ON(); + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD); + + // Start the timer + StartCountSspClk(); + + DemodReset(); + UartReset(); +} //----------------------------------------------------------------------------- // Read a SRI512 ISO 14443B tag. @@ -1252,12 +1351,19 @@ void RAMFUNC SnoopIso14443b(void) */ void SendRawCommand14443B(uint32_t datalen, uint32_t recv, uint8_t powerfield, uint8_t data[]) { + iso14443b_setup(); FpgaDownloadAndGo(FPGA_BITSTREAM_HF); BigBuf_free(); - SetAdcMuxFor(GPIO_MUXSEL_HIPKD); if ( !PowerOn ){ FpgaSetupSsc(); } + SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + + // Start the timer + StartCountSspClk(); + + DemodReset(); + UartReset(); if ( datalen == 0 && recv == 0 && powerfield == 0){ clear_trace(); -- 2.39.2