From bc9393715faea086a5275664cc12c628c7d49d4e Mon Sep 17 00:00:00 2001 From: iceman1001 Date: Mon, 18 Apr 2016 13:26:16 +0200 Subject: [PATCH] CHG: "hf 14a sim" command , correct use of FLAGS CHG: "hf 14a sim" command, changed the data collection for the attackmode in SimulateIso14443aTag. It now uses @holiman 's original implementation. But we can't change "NR", so we do next. CHG: "hf 14a sim" command, nonce is increase with every new auth. This is for the "mfkey32_moebius" attack to work. CHG: "hf mf sim" command (function void Mifare1ksim ) now handles UID' with length 10. CHG: "hf mf sim" command nonce is increase with every new auth. This is for the "mfkey32_moebius" attack to work. --- armsrc/iso14443a.c | 229 +++++++++++++++++++++------------------------ 1 file changed, 107 insertions(+), 122 deletions(-) diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index 59edffc9..c40254b7 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -510,6 +510,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non // Record the sequence of commands sent by the reader to the tag, with // triggering so that we start recording at the point that the tag is moved // near the reader. +// "hf 14a sniff" //----------------------------------------------------------------------------- void RAMFUNC SniffIso14443a(uint8_t param) { // param: @@ -660,13 +661,13 @@ void RAMFUNC SniffIso14443a(uint8_t param) { } } // main cycle + if (MF_DBGLEVEL >= 1) { + Dbprintf("maxDataLen=%d, Uart.state=%x, Uart.len=%d", maxDataLen, Uart.state, Uart.len); + Dbprintf("traceLen=%d, Uart.output[0]=%08x", BigBuf_get_traceLen(), (uint32_t)Uart.output[0]); + } FpgaDisableSscDma(); - LEDsoff(); - - Dbprintf("maxDataLen=%d, Uart.state=%x, Uart.len=%d", maxDataLen, Uart.state, Uart.len); - Dbprintf("traceLen=%d, Uart.output[0]=%08x", BigBuf_get_traceLen(), (uint32_t)Uart.output[0]); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + LEDsoff(); set_tracing(FALSE); } @@ -856,12 +857,14 @@ bool prepare_allocated_tag_modulation(tag_response_info_t* response_info) { //----------------------------------------------------------------------------- void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { - //Here, we collect CUID, NT, AR, NR, NT2, AR2, NR2 + //Here, we collect CUID, NT, NR, AR, CUID, NT2, NR2, AR2 // This can be used in a reader-only attack. uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0}; uint8_t ar_nr_collected = 0; uint8_t sak = 0; - + uint32_t cuid = 0; + uint32_t nonce = 0; + // PACK response to PWD AUTH for EV1/NTAG uint8_t response8[4] = {0,0,0,0}; // Counter for EV1/NTAG @@ -926,7 +929,7 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { // For UID size 7, uint8_t response2a[5] = {0x00}; - if (flags & FLAG_7B_UID_IN_DATA) { + if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA ) { response2[0] = 0x88; // Cascade Tag marker response2[1] = data[0]; response2[2] = data[1]; @@ -941,11 +944,14 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { // Configure the ATQA and SAK accordingly response1[0] |= 0x40; sak |= 0x04; + + cuid = bytes_to_num(data+3, 4); } else { memcpy(response2, data, 4); // Configure the ATQA and SAK accordingly response1[0] &= 0xBF; sak &= 0xFB; + cuid = bytes_to_num(data, 4); } // Calculate the BitCountCheck (BCC) for the first 4 bytes of the UID. @@ -968,6 +974,9 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { // TC(1) = 0x02: CID supported, NAD not supported ComputeCrc14443(CRC_14443_A, response6, 4, &response6[4], &response6[5]); + // the randon nonce + nonce = bytes_to_num(response5, 4); + // Prepare GET_VERSION (different for UL EV-1 / NTAG) //uint8_t response7_EV1[] = {0x00, 0x04, 0x03, 0x01, 0x01, 0x00, 0x0b, 0x03, 0xfd, 0xf7}; //EV1 48bytes VERSION. //uint8_t response7_NTAG[] = {0x00, 0x04, 0x04, 0x02, 0x01, 0x00, 0x11, 0x03, 0x01, 0x9e}; //NTAG 215 @@ -1041,7 +1050,11 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { DbpString("Button press"); break; } - + + // incease nonce at every command recieved + nonce++; + num_to_bytes(nonce, 4, response5); + p_response = NULL; // Okay, look at the command now. @@ -1144,15 +1157,15 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { } } else if (order == 7 && len == 8) { // Received {nr] and {ar} (part of authentication) LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); - uint32_t nonce = bytes_to_num(response5,4); uint32_t nr = bytes_to_num(receivedCmd,4); uint32_t ar = bytes_to_num(receivedCmd+4,4); - if(flags & FLAG_NR_AR_ATTACK ) { + if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) { if(ar_nr_collected < 2){ // Avoid duplicates... probably not necessary, nr should vary. + // nr doesn't change in pm3's reading etc. its fixed. //if(ar_nr_responses[3] != nr){ - ar_nr_responses[ar_nr_collected*4] = 0; + ar_nr_responses[ar_nr_collected*4] = cuid; ar_nr_responses[ar_nr_collected*4+1] = nonce; ar_nr_responses[ar_nr_collected*4+2] = nr; ar_nr_responses[ar_nr_collected*4+3] = ar; @@ -1161,7 +1174,7 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { } if(ar_nr_collected > 1 ) { - if (MF_DBGLEVEL >= 2) { + if (MF_DBGLEVEL >= 2 && !(flags & FLAG_INTERACTIVE)) { Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x", ar_nr_responses[0], // CUID @@ -1172,8 +1185,8 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { ar_nr_responses[7] // NR2 ); } - uint8_t len = ar_nr_collected*5*4; - cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,len,0,&ar_nr_responses,len); + uint8_t len = ar_nr_collected*4*4; + cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len); ar_nr_collected = 0; memset(ar_nr_responses, 0x00, len); } @@ -1268,6 +1281,11 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { // Count number of other messages after a halt if(order != 6 && lastorder == 5) { happened2++; } + // comment this limit if you want to simulation longer + if (!tracing) { + Dbprintf("Trace Full. Simulation stopped."); + break; + } // comment this limit if you want to simulation longer if(cmdsRecvd > 999) { DbpString("1000 commands later..."); @@ -1292,12 +1310,6 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { (LastTimeProxToAirStart + p_response->ProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG, par); } - - // comment this limit if you want to simulation longer - if (!tracing) { - Dbprintf("Trace Full. Simulation stopped."); - break; - } } FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -2065,10 +2077,8 @@ int32_t dist_nt(uint32_t nt1, uint32_t nt2) { uint32_t nttmp2 = nt2; for (i = 1; i < (32768/8); ++i) { - nttmp1 = prng_successor(nttmp1, 1); - if (nttmp1 == nt2) return i; - nttmp2 = prng_successor(nttmp2, 1); - if (nttmp2 == nt1) return -i; + nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i; + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -i; nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+1; nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+1); @@ -2096,7 +2106,6 @@ int32_t dist_nt(uint32_t nt1, uint32_t nt2) { // (article by Nicolas T. Courtois, 2009) //----------------------------------------------------------------------------- void ReaderMifare(bool first_try, uint8_t block ) { - //uint8_t mf_auth[] = { MIFARE_AUTH_KEYA,0x00,0xf5,0x7b }; uint8_t mf_auth[] = { MIFARE_AUTH_KEYA, block, 0x00, 0x00 }; uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; uint8_t uid[10] = {0,0,0,0,0,0,0,0,0,0}; @@ -2120,7 +2129,7 @@ void ReaderMifare(bool first_try, uint8_t block ) { uint16_t unexpected_random = 0; uint16_t sync_tries = 0; - // static variables here, is re-used in the next call? + // static variables here, is re-used in the next call static uint32_t nt_attacked = 0; static uint32_t sync_time = 0; static uint32_t sync_cycles = 0; @@ -2130,7 +2139,6 @@ void ReaderMifare(bool first_try, uint8_t block ) { #define PRNG_SEQUENCE_LENGTH (1 << 16) #define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up. #define MAX_SYNC_TRIES 32 - #define MAX_STRATEGY 3 BigBuf_free(); BigBuf_Clear_ext(false); clear_trace(); @@ -2145,8 +2153,6 @@ void ReaderMifare(bool first_try, uint8_t block ) { mf_nr_ar3 = 0; nt_attacked = 0; par_low = 0; - - Dbprintf("FIRST: sync_time - %08X", sync_time); } else { // we were unsuccessful on a previous call. // Try another READER nonce (first 3 parity bits remain the same) @@ -2328,7 +2334,7 @@ void ReaderMifare(bool first_try, uint8_t block ) { mf_nr_ar[3] &= 0x1F; - if (MF_DBGLEVEL >= 1) Dbprintf("\nNumber of sent auth requestes: %u", i); + if (MF_DBGLEVEL >= 4) Dbprintf("Number of sent auth requestes: %u", i); uint8_t buf[28] = {0x00}; memset(buf, 0x00, sizeof(buf)); @@ -2381,10 +2387,10 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint8_t response[MAX_MIFARE_FRAME_SIZE] = {0x00}; uint8_t response_par[MAX_MIFARE_PARITY_SIZE] = {0x00}; - uint8_t atqa[] = {0x04, 0x00}; // Mifare classic 1k (4b UID) - uint8_t sak_4[] = {0x08, 0x00, 0x00}; // Mifare Classic - uint8_t sak_7[] = {0x08, 0x00, 0x00}; // CL2 - 7b uid - uint8_t sak_10[] = {0x08, 0x00, 0x00}; // CL3 - 10b uid + uint8_t atqa[] = {0x04, 0x00}; // Mifare classic 1k + uint8_t sak_4[] = {0x0C, 0x00, 0x00}; // CL1 - 4b uid + uint8_t sak_7[] = {0x0C, 0x00, 0x00}; // CL2 - 7b uid + uint8_t sak_10[] = {0x0C, 0x00, 0x00}; // CL3 - 10b uid //uint8_t sak[] = {0x09, 0x3f, 0xcc }; // Mifare Mini uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; @@ -2395,61 +2401,43 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * //uint8_t rAUTH_NT[] = {0x55, 0x41, 0x49, 0x92};// nonce from nested? why this? uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00}; - // Here, we collect CUID, NT, AR, NR, NT2, AR2, NR2 + // Here, we collect CUID, NT, NR, AR, CUID2, NT2, NR2, AR2 // This can be used in a reader-only attack. - uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0}; + uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0}; uint8_t ar_nr_collected = 0; // Authenticate response - nonce uint32_t nonce = bytes_to_num(rAUTH_NT, 4); + ar_nr_responses[1] = nonce; //-- Determine the UID // Can be set from emulator memory or incoming data // Length: 4,7,or 10 bytes - if ( flags & FLAG_UID_IN_EMUL ) { - emlGetMemBt(rUIDBCC1, 0, 4); - _UID_LEN = 4; - } else if (flags & FLAG_4B_UID_IN_DATA) { + if ( (flags & FLAG_UID_IN_EMUL) == FLAG_UID_IN_EMUL) + emlGetMemBt(datain, 0, 10); // load 10bytes from EMUL to the datain pointer. to be used below. + + if ( (flags & FLAG_4B_UID_IN_DATA) == FLAG_4B_UID_IN_DATA) { memcpy(rUIDBCC1, datain, 4); _UID_LEN = 4; - } else if (flags & FLAG_7B_UID_IN_DATA) { + } else if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA) { memcpy(&rUIDBCC1[1], datain, 3); memcpy( rUIDBCC2, datain+3, 4); _UID_LEN = 7; - } else if (flags & FLAG_10B_UID_IN_DATA) { + } else if ( (flags & FLAG_10B_UID_IN_DATA) == FLAG_10B_UID_IN_DATA) { memcpy(&rUIDBCC1[1], datain, 3); - memcpy(&rUIDBCC2[1], datain+3, 4); - memcpy( rUIDBCC3, datain+7, 4); + memcpy(&rUIDBCC2[1], datain+3, 3); + memcpy( rUIDBCC3, datain+6, 4); _UID_LEN = 10; } - /* - * Save cuid to collected response array. - * Set XOR BCC (fifth byte) and modify the ATQA for 4,7 or 10-byte UID - atqa[] = 0x04, 0x00; - sak = 0x08; - if (flags & FLAG_7B_UID_IN_DATA) { - atqa[0] |= 0x40; - sak |= 0x04; - } else { - atqa[0] &= 0xBF; - sak &= 0xFB; - - // Prepare the mandatory SAK (for 4 and 7 byte UID) - uint8_t response3[3] = {sak, 0x00, 0x00}; - ComputeCrc14443(CRC_14443_A, response3, 1, &response3[1], &response3[2]); - */ switch (_UID_LEN) { case 4: - atqa[0] &= 0xBF; - sak_4[0] &= 0xFB; - ComputeCrc14443(CRC_14443_A, sak_4, 1, &sak_4[1], &sak_4[2]); - + sak_4[0] &= 0xFB; // save CUID ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC1, 4); // BCC rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; - if (MF_DBGLEVEL >= 1) { + if (MF_DBGLEVEL >= 2) { Dbprintf("4B UID: %02x%02x%02x%02x", rUIDBCC1[0], rUIDBCC1[1], @@ -2460,19 +2448,16 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * break; case 7: atqa[0] |= 0x40; - sak_7[0] |= 0x04; - ComputeCrc14443(CRC_14443_A, sak_7, 1, &sak_7[1], &sak_7[2]); - + sak_7[0] &= 0xFB; // save CUID - ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC2, 4); - - rUIDBCC1[0] = 0x88; // CascadeTag, CT + ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC2, 4); + // CascadeTag, CT + rUIDBCC1[0] = 0x88; // BCC rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3]; - if (MF_DBGLEVEL >= 1) { + if (MF_DBGLEVEL >= 2) { Dbprintf("7B UID: %02x %02x %02x %02x %02x %02x %02x", - //rUIDBCC1[0], rUIDBCC1[1], rUIDBCC1[2], rUIDBCC1[3], @@ -2484,27 +2469,23 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } break; case 10: - atqa[0] |= 0x40; - sak_10[0] |= 0x04; - ComputeCrc14443(CRC_14443_A, sak_10, 1, &sak_10[1], &sak_10[2]); - + atqa[0] |= 0x80; + sak_10[0] &= 0xFB; // save CUID ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC3, 4); - rUIDBCC1[0] = 0x88; // CascadeTag, CT + // CascadeTag, CT + rUIDBCC1[0] = 0x88; + rUIDBCC2[0] = 0x88; // BCC rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; - - rUIDBCC2[0] = 0x88; // CascadeTag, CT - // BCC rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3]; rUIDBCC3[4] = rUIDBCC3[0] ^ rUIDBCC3[1] ^ rUIDBCC3[2] ^ rUIDBCC3[3]; - if (MF_DBGLEVEL >= 1) { + + if (MF_DBGLEVEL >= 2) { Dbprintf("10B UID: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", - //rUIDBCC1[0], rUIDBCC1[1], rUIDBCC1[2], rUIDBCC1[3], - //rUIDBCC2[0], rUIDBCC2[1], rUIDBCC2[2], rUIDBCC2[3], @@ -2518,7 +2499,11 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * default: break; } - + // calc some crcs + ComputeCrc14443(CRC_14443_A, sak_4, 1, &sak_4[1], &sak_4[2]); + ComputeCrc14443(CRC_14443_A, sak_7, 1, &sak_7[1], &sak_7[2]); + ComputeCrc14443(CRC_14443_A, sak_10, 1, &sak_10[1], &sak_10[2]); + // We need to listen to the high-frequency, peak-detected path. iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN); @@ -2559,6 +2544,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * crypto1_destroy(pcs); cardAUTHKEY = 0xff; LEDsoff(); + nonce++; continue; } @@ -2626,9 +2612,8 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * continue; default:break; } - } else { - cardSTATE_TO_IDLE(); - } + } + cardSTATE_TO_IDLE(); break; } case MFEMUL_SELECT3:{ @@ -2650,9 +2635,8 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * LED_B_ON(); if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol3 time: %d", GetTickCount() - selTimer); break; - } else { - cardSTATE_TO_IDLE(); } + cardSTATE_TO_IDLE(); break; } case MFEMUL_AUTH1:{ @@ -2662,23 +2646,22 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * break; } - uint32_t ar = bytes_to_num(receivedCmd, 4); - uint32_t nr = bytes_to_num(&receivedCmd[4], 4); + uint32_t nr = bytes_to_num(receivedCmd, 4); + uint32_t ar = bytes_to_num(&receivedCmd[4], 4); //Collect AR/NR //if(ar_nr_collected < 2 && cardAUTHSC == 2){ - if(ar_nr_collected < 2) { - if(ar_nr_responses[2] != ar) { - // Avoid duplicates... probably not necessary, ar should vary. - //ar_nr_responses[ar_nr_collected*5] = 0; - //ar_nr_responses[ar_nr_collected*5+1] = 0; - ar_nr_responses[ar_nr_collected*5+2] = nonce; - ar_nr_responses[ar_nr_collected*5+3] = nr; - ar_nr_responses[ar_nr_collected*5+4] = ar; + if(ar_nr_collected < 2) { + //if(ar_nr_responses[2] != nr) { + ar_nr_responses[ar_nr_collected*4] = cuid; + ar_nr_responses[ar_nr_collected*4+1] = nonce; + ar_nr_responses[ar_nr_collected*4+2] = nr; + ar_nr_responses[ar_nr_collected*4+3] = ar; ar_nr_collected++; - } + //} + // Interactive mode flag, means we need to send ACK - finished = (flags & FLAG_INTERACTIVE && ar_nr_collected == 2); + finished = ( ((flags & FLAG_INTERACTIVE) == FLAG_INTERACTIVE)&& ar_nr_collected == 2); } /* crypto1_word(pcs, ar , 1); @@ -2704,7 +2687,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * num_to_bytes(ans, 4, rAUTH_AT); EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT)); LED_C_ON(); - + if (MF_DBGLEVEL >= 4) { Dbprintf("AUTH COMPLETED for sector %d with key %c. time=%d", cardAUTHSC, @@ -2915,31 +2898,33 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } // Interactive mode flag, means we need to send ACK - if(flags & FLAG_INTERACTIVE) { + if((flags & FLAG_INTERACTIVE) == FLAG_INTERACTIVE) { //May just aswell send the collected ar_nr in the response aswell - uint8_t len = ar_nr_collected*5*4; + uint8_t len = ar_nr_collected * 4 * 4; cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len); } - if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1 ) { + if( ((flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) && MF_DBGLEVEL >= 1 ) { if(ar_nr_collected > 1 ) { Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); - Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x", + Dbprintf("../tools/mfkey/mfkey32v2.exe %08x %08x %08x %08x %08x %08x %08x", ar_nr_responses[0], // CUID - ar_nr_responses[1], // NT - ar_nr_responses[2], // AR1 - ar_nr_responses[3], // NR1 - ar_nr_responses[4], // AR2 - ar_nr_responses[5] // NR2 + ar_nr_responses[1], // NT1 + ar_nr_responses[2], // NR1 + ar_nr_responses[3], // AR1 + //ar_nr_responses[4], // CUID2 + ar_nr_responses[5], // NT2 + ar_nr_responses[6], // NR2 + ar_nr_responses[7] // AR2 ); } else { Dbprintf("Failed to obtain two AR/NR pairs!"); - if(ar_nr_collected > 0 ) { - Dbprintf("Only got these: UID=%08x, nonce=%08x, AR1=%08x, NR1=%08x", + if(ar_nr_collected == 1 ) { + Dbprintf("Only got these: UID=%08x, nonce=%08x, NR1=%08x, AR1=%08x", ar_nr_responses[0], // CUID ar_nr_responses[1], // NT - ar_nr_responses[2], // AR1 - ar_nr_responses[3] // NR1 + ar_nr_responses[2], // NR1 + ar_nr_responses[3] // AR1 ); } } @@ -2957,10 +2942,9 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * // // if no activity for 2sec, it sends the collected data to the client. //----------------------------------------------------------------------------- +// "hf mf sniff" void RAMFUNC SniffMifare(uint8_t param) { - // param: - // bit 0 - trigger from first card answer - // bit 1 - trigger from first reader 7-bit request + LEDsoff(); // free eventually allocated BigBuf memory @@ -3097,10 +3081,11 @@ void RAMFUNC SniffMifare(uint8_t param) { data = dmaBuf; } // main cycle - + + if (MF_DBGLEVEL >= 1) Dbprintf("maxDataLen=%x, Uart.state=%x, Uart.len=%x", maxDataLen, Uart.state, Uart.len); + FpgaDisableSscDma(); MfSniffEnd(); - if (MF_DBGLEVEL >= 1) Dbprintf("maxDataLen=%x, Uart.state=%x, Uart.len=%x", maxDataLen, Uart.state, Uart.len); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); set_tracing(FALSE); -- 2.39.5