From e67b06b7067c55f12bbdf72c5f9f00dec11e99fd Mon Sep 17 00:00:00 2001 From: "apresence@gmail.com" Date: Sun, 12 May 2013 08:11:00 +0000 Subject: [PATCH] Support for cloning to T55x7 at different clock rates & 134KHz * Modified commands (lf em4x): em410xwatch ['h'] -- Watches for EM410x 125/134 kHz tags (option 'h' for 134) em410xwrite <'0' T5555> <'1' T55x7> [clock rate] -- Write EM410x UID to T5555(Q5) or T55x7 tag, optionally setting clock rate * Better option checking for em410xwrite & fix for uninitialized vars * Increased samples from 2000 to 4000 in em410xwatch (2000 is OK for clock=64, but too few for clock=32) --- armsrc/lfops.c | 28 +++++++++++++-- client/cmdlfem4x.c | 88 ++++++++++++++++++++++++++++++++++++---------- 2 files changed, 95 insertions(+), 21 deletions(-) diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 8d4e2dc9..17d293ed 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -1175,6 +1175,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) uint64_t rev_id = 0; // reversed ID int c_parity[4]; // column parity int r_parity = 0; // row parity + uint32_t clock = 0; // Reverse ID bits given as parameter (for simpler operations) for (i = 0; i < EM410X_ID_LENGTH; ++i) { @@ -1232,12 +1233,35 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) T55xxWriteBlock((uint32_t)id, 2, 0, 0); // Config for EM410x (RF/64, Manchester, Maxblock=2) - if (card) + if (card) { + // Clock rate is stored in bits 8-15 of the card value + clock = (card & 0xFF00) >> 8; + Dbprintf("Clock rate: %d", clock); + switch (clock) + { + case 32: + clock = T55x7_BITRATE_RF_32; + break; + case 16: + clock = T55x7_BITRATE_RF_16; + break; + case 0: + // A value of 0 is assumed to be 64 for backwards-compatibility + // Fall through... + case 64: + clock = T55x7_BITRATE_RF_64; + break; + default: + Dbprintf("Invalid clock rate: %d", clock); + return; + } + // Writing configuration for T55x7 tag - T55xxWriteBlock(T55x7_BITRATE_RF_64 | + T55xxWriteBlock(clock | T55x7_MODULATION_MANCHESTER | 2 << T55x7_MAXBLOCK_SHIFT, 0, 0, 0); + } else // Writing configuration for T5555(Q5) tag T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT | diff --git a/client/cmdlfem4x.c b/client/cmdlfem4x.c index f823750b..862f20bd 100644 --- a/client/cmdlfem4x.c +++ b/client/cmdlfem4x.c @@ -248,10 +248,16 @@ int CmdEM410xSim(const char *Cmd) * looped until an EM410x tag is detected */ int CmdEM410xWatch(const char *Cmd) { + int read_h = (*Cmd == 'h'); do { - CmdLFRead(""); - CmdSamples("2000"); + CmdLFRead(read_h ? "h" : ""); + // 2000 samples is OK for clock=64, but not clock=32. Probably want + // 8000 for clock=16. Don't want to go too high since old HID driver + // is very slow + // TBD: Auto-grow sample size based on detected sample rate. IE: If the + // rate gets lower, then grow the number of samples + CmdSamples("4000"); } while ( ! CmdEM410xRead("")); return 0; } @@ -402,22 +408,66 @@ int CmdEM4x50Read(const char *Cmd) int CmdEM410xWrite(const char *Cmd) { - uint64_t id = 0; - unsigned int card; + uint64_t id = 0xFFFFFFFFFFFFFFFF; // invalid id value + unsigned int card = 0xFF; // invalid card value + unsigned int clock = 0; // invalid clock value + + sscanf(Cmd, "%" PRIx64 " %d %d", &id, &card, &clock); + + // Check ID + if (id == 0xFFFFFFFFFFFFFFFF) { + PrintAndLog("Error! ID is required.\n"); + return 0; + } + if (id >= 0x10000000000) { + PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n"); + return 0; + } + + // Check Card + if (card == 0xFF) { + PrintAndLog("Error! Card type required.\n"); + return 0; + } + if (card < 0) { + PrintAndLog("Error! Bad card type selected.\n"); + return 0; + } + + // Check Clock + if (card == 1) + { + // Default: 64 + if (clock == 0) + clock = 64; + + // Allowed clock rates: 16, 32 and 64 + if ((clock != 16) && (clock != 32) && (clock != 64)) { + PrintAndLog("Error! Clock rate %d not valid. Supported clock rates are 16, 32 and 64.\n", clock); + return 0; + } + } + else if (clock != 0) + { + PrintAndLog("Error! Clock rate is only supported on T55x7 tags.\n"); + return 0; + } + + if (card == 1) { + PrintAndLog("Writing %s tag with UID 0x%010" PRIx64 " (clock rate: %d)", "T55x7", id, clock); + // NOTE: We really should pass the clock in as a separate argument, but to + // provide for backwards-compatibility for older firmware, and to avoid + // having to add another argument to CMD_EM410X_WRITE_TAG, we just store + // the clock rate in bits 8-15 of the card value + card = (card & 0xFF) | (((uint64_t)clock << 8) & 0xFF00); + } + else if (card == 0) + PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, "T5555", id, clock); + else { + PrintAndLog("Error! Bad card type selected.\n"); + return 0; + } - sscanf(Cmd, "%" PRIx64 " %d", &id, &card); - - if (id >= 0x10000000000) { - PrintAndLog("Error! Given EM410x ID is longer than 40 bits.\n"); - return 0; - } - - if (card > 1) { - PrintAndLog("Error! Bad card type selected.\n"); - return 0; - } - - PrintAndLog("Writing %s tag with UID 0x%010" PRIx64, card ? "T55x7":"T5555", id); UsbCommand c = {CMD_EM410X_WRITE_TAG, {card, (uint32_t)(id >> 32), (uint32_t)id}}; SendCommand(&c); @@ -527,8 +577,8 @@ static command_t CommandTable[] = {"help", CmdHelp, 1, "This help"}, {"em410xread", CmdEM410xRead, 1, "[clock rate] -- Extract ID from EM410x tag"}, {"em410xsim", CmdEM410xSim, 0, " -- Simulate EM410x tag"}, - {"em410xwatch", CmdEM410xWatch, 0, "Watches for EM410x tags"}, - {"em410xwrite", CmdEM410xWrite, 1, " <'0' T5555> <'1' T55x7> -- Write EM410x UID to T5555(Q5) or T55x7 tag"}, + {"em410xwatch", CmdEM410xWatch, 0, "['h'] -- Watches for EM410x 125/134 kHz tags (option 'h' for 134)"}, + {"em410xwrite", CmdEM410xWrite, 1, " <'0' T5555> <'1' T55x7> [clock rate] -- Write EM410x UID to T5555(Q5) or T55x7 tag, optionally setting clock rate"}, {"em4x50read", CmdEM4x50Read, 1, "Extract data from EM4x50 tag"}, {"readword", CmdReadWord, 1, " -- Read EM4xxx word data"}, {"readwordPWD", CmdReadWordPWD, 1, " -- Read EM4xxx word data in password mode"}, -- 2.39.5