make sure to touch the ngc file when synthesis completes, even if unchanged

[raggedstone] / ethernet / source / pci / pci_target32_sm.v

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  File name: pci_target32_sm.v                                ////
////                                                              ////
////  This file is part of the "PCI bridge" project               ////
////  http://www.opencores.org/cores/pci/                         ////
////                                                              ////
////  Author(s):                                                  ////
////      - Tadej Markovic, tadej@opencores.org                   ////
////                                                              ////
////  All additional information is avaliable in the README.txt   ////
////  file.                                                       ////
////                                                              ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Tadej Markovic, tadej@opencores.org       ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: pci_target32_sm.v,v $
// Revision 1.1  2007-03-20 17:50:56  sithglan
// add shit
//
// Revision 1.11  2003/12/19 11:11:30  mihad
// Compact PCI Hot Swap support added.
// New testcases added.
// Specification updated.
// Test application changed to support WB B3 cycles.
//
// Revision 1.10  2003/08/08 16:36:33  tadejm
// Added 'three_left_out' to pci_pciw_fifo signaling three locations before full. Added comparison between current registered cbe and next unregistered cbe to signal wb_master whether it is allowed to performe burst or not. Due to this, I needed 'three_left_out' so that writing to pci_pciw_fifo can be registered, otherwise timing problems would occure.
//
// Revision 1.9  2003/01/27 16:49:31  mihad
// Changed module and file names. Updated scripts accordingly. FIFO synchronizations changed.
//
// Revision 1.8  2003/01/21 16:06:56  mihad
// Bug fixes, testcases added.
//
// Revision 1.7  2002/09/24 19:09:17  mihad
// Number of state bits define was removed
//
// Revision 1.6  2002/09/24 18:30:00  mihad
// Changed state machine encoding to true one-hot
//
// Revision 1.5  2002/08/22 09:07:06  mihad
// Fixed a bug and provided testcase for it. Target was responding to configuration cycle type 1 transactions.
//
// Revision 1.4  2002/02/19 16:32:37  mihad
// Modified testbench and fixed some bugs
//
// Revision 1.3  2002/02/01 15:25:12  mihad
// Repaired a few bugs, updated specification, added test bench files and design document
//
// Revision 1.2  2001/10/05 08:14:30  mihad
// Updated all files with inclusion of timescale file for simulation purposes.
//
// Revision 1.1.1.1  2001/10/02 15:33:47  mihad
// New project directory structure
//
//

`include "pci_constants.v"

// synopsys translate_off
`include "timescale.v"
// synopsys translate_on

module pci_target32_sm
(
    // system inputs
    clk_in,
    reset_in,
    // master inputs
    pci_frame_in,
    pci_irdy_in,
    pci_idsel_in,
    pci_frame_reg_in,
    pci_irdy_reg_in,
    pci_idsel_reg_in,
    // target response outputs
    pci_trdy_out,
    pci_stop_out,
    pci_devsel_out,
    pci_trdy_en_out,
    pci_stop_en_out,
    pci_devsel_en_out,
    ad_load_out,
    ad_load_on_transfer_out,
    // address, data, bus command, byte enable in/outs
    pci_ad_reg_in,
    pci_ad_out,
    pci_ad_en_out,
    pci_cbe_reg_in,
    pci_cbe_in,
    bckp_trdy_en_in,
    bckp_devsel_in,
    bckp_trdy_in,
    bckp_stop_in,
    pci_trdy_reg_in,
    pci_stop_reg_in,

    // backend side of state machine with control signals to pci_io_mux ...
    address_out,
    addr_claim_in,
    bc_out,
    bc0_out,
    data_out,
    data_in,
    be_out,
    next_be_out,
    req_out,
    rdy_out,
    addr_phase_out,
    bckp_devsel_out,
    bckp_trdy_out,
    bckp_stop_out,
    last_reg_out,
    frame_reg_out,
    fetch_pcir_fifo_out,
    load_medium_reg_out,
    sel_fifo_mreg_out,
    sel_conf_fifo_out,
    load_to_pciw_fifo_out,
    load_to_conf_out,
    same_read_in,
    norm_access_to_config_in,
    read_completed_in,
    read_processing_in,
    target_abort_in,
    disconect_wo_data_in,
    disconect_w_data_in,
    target_abort_set_out,
    pciw_fifo_full_in,
    pcir_fifo_data_err_in,
    wbw_fifo_empty_in,
    wbu_del_read_comp_pending_in,
    wbu_frame_en_in

) ;

/*----------------------------------------------------------------------------------------------------------------------
Various parameters needed for state machine and other stuff
----------------------------------------------------------------------------------------------------------------------*/
parameter       S_IDLE          = 3'b001 ;
parameter       S_WAIT          = 3'b010 ;
parameter       S_TRANSFERE     = 3'b100 ;


/*==================================================================================================================
System inputs.
==================================================================================================================*/
// PCI side clock and reset
input   clk_in,
        reset_in ;


/*==================================================================================================================
PCI interface signals - bidirectional signals are divided to inputs and outputs in I/O cells instantiation
module. Enables are separate signals.
==================================================================================================================*/
// master inputs
input   pci_frame_in,
        pci_irdy_in,
        pci_idsel_in ;
input   pci_frame_reg_in,
        pci_irdy_reg_in,
        pci_idsel_reg_in ;

// target response outputs
output  pci_trdy_out,
        pci_stop_out,
        pci_devsel_out ;
output  pci_trdy_en_out,
        pci_stop_en_out,
        pci_devsel_en_out ;
output  ad_load_out ;
output  ad_load_on_transfer_out ;
// address, data, bus command, byte enable in/outs
input   [31:0]  pci_ad_reg_in ;
output  [31:0]  pci_ad_out ;
output          pci_ad_en_out ;
input   [3:0]   pci_cbe_reg_in ;
input   [3:0]   pci_cbe_in ;
input           bckp_trdy_en_in ;
input           bckp_devsel_in ;
input           bckp_trdy_in ;
input           bckp_stop_in ;
input           pci_trdy_reg_in ;
input           pci_stop_reg_in ;


/*==================================================================================================================
Other side of PCI Target state machine
==================================================================================================================*/
// Data, byte enables, bus commands and address ports
output  [31:0]  address_out ;       // current request address output - registered
input           addr_claim_in ;     // current request address claim input
output  [3:0]   bc_out ;            // current request bus command output - registered
output          bc0_out ;           // current cycle RW signal output
input   [31:0]  data_in ;           // for read operations - current dataphase data input
output  [31:0]  data_out ;          // for write operations - current request data output - registered
output   [3:0]  be_out ;            // current dataphase byte enable outputs - registered
output   [3:0]  next_be_out ;       // next dataphase byte enable outputs - NOT registered
// Port connection control signals from PCI FSM
output          req_out ;           // Read is requested to WB master
output          rdy_out ;           // DATA / ADDRESS selection when read or write - registered
output          addr_phase_out ;    // Indicates address phase and also fast-back-to-back address phase - registered
output			bckp_devsel_out ;	// DEVSEL output (which is registered) equivalent
output          bckp_trdy_out ;     // TRDY output (which is registered) equivalent
output			bckp_stop_out ;		// STOP output (which is registered) equivalent
output          last_reg_out ;      // Indicates last data phase - registered
output          frame_reg_out ;     // FRAME output signal - registered
output          fetch_pcir_fifo_out ;// Read enable for PCIR_FIFO when when read is finishen on WB side
output          load_medium_reg_out ;// Load data from PCIR_FIFO to medium register (first data must be prepared on time)
output          sel_fifo_mreg_out ; // Read data selection between PCIR_FIFO and medium register
output          sel_conf_fifo_out ; // Read data selection between Configuration registers and "FIFO"
output          load_to_pciw_fifo_out ;// Write enable to PCIW_FIFO
output          load_to_conf_out ;  // Write enable to Configuration space registers


/*==================================================================================================================
Status
==================================================================================================================*/
input           same_read_in ;              // Indicates the same read request (important when read is finished on WB side)
input           norm_access_to_config_in ;  // Indicates the access to Configuration space with MEMORY commands
input           read_completed_in ;         // Indicates that read request is completed on WB side
input           read_processing_in ;        // Indicates that read request is processing on WB side
input           target_abort_in ;           // Indicates target abort termination
input           disconect_wo_data_in ;      // Indicates disconnect without data termination
input			disconect_w_data_in ;		// Indicates disconnect with data termination
input           pciw_fifo_full_in ;         // Indicates that write PCIW_FIFO is full
input           pcir_fifo_data_err_in ;     // Indicates data error on current data read from PCIR_FIFO
input           wbw_fifo_empty_in ;         // Indicates that WB SLAVE UNIT has no data to be written to PCI bus