IDSEL

[raggedstone] / dhwk / source / pci / config_10h.vhd

-- J.STELZNER
-- INFORMATIK-3 LABOR
-- 23.08.2006
-- File: CONFIG_10H.VHD

library IEEE;
use IEEE.std_logic_1164.all;

entity CONFIG_10H is
        port
        (
                PCI_CLOCK :in std_logic;
                PCI_RSTn :in std_logic;
                AD_REG :in std_logic_vector(31 downto 0);
                CBE_REGn :in std_logic_vector( 3 downto 0);
                CONF_WR_10H :in std_logic;
                CONF_DATA_10H :out std_logic_vector(31 downto 0)
        );
end entity CONFIG_10H;

architecture CONFIG_10H_DESIGN of CONFIG_10H is

        signal CONF_BAS_ADDR_REG :std_logic_vector(31 downto 0);

begin

 --*******************************************************************
 --***** PCI Configuration Space Header "BASE ADDRESS REGISTER" ******
 --*******************************************************************

        CONF_BAS_ADDR_REG(1 downto 0) <= "01";-- Base Address Register for "I/O"
        CONF_BAS_ADDR_REG(3 downto 2) <= "00";-- IO Bereich = 16 BYTE

        process (PCI_CLOCK,PCI_RSTn)
        begin

 -- if PCI_RSTn = '0' then CONF_BAS_ADDR_REG(31 downto 2) <= (others =>'0');
        if PCI_RSTn = '0' then
                CONF_BAS_ADDR_REG(31 downto 4) <= (others =>'0');

        elsif (PCI_CLOCK'event and PCI_CLOCK = '1') then

                if CONF_WR_10H = '1'and CBE_REGn(3) = '0' then
                        CONF_BAS_ADDR_REG(31 downto 24) <= AD_REG(31 downto 24);
                else
                        CONF_BAS_ADDR_REG(31 downto 24) <= CONF_BAS_ADDR_REG(31 downto 24);
                end if;

                if CONF_WR_10H = '1'and CBE_REGn(2) = '0' then
                        CONF_BAS_ADDR_REG(23 downto 16) <= AD_REG(23 downto 16);
                else
                        CONF_BAS_ADDR_REG(23 downto 16) <= CONF_BAS_ADDR_REG(23 downto 16);
                end if;

                if CONF_WR_10H = '1'and CBE_REGn(1) = '0' then
                        CONF_BAS_ADDR_REG(15 downto 8) <= AD_REG(15 downto 8);
                else
                        CONF_BAS_ADDR_REG(15 downto 8) <= CONF_BAS_ADDR_REG(15 downto 8);
                end if;

                -- if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
                --         CONF_BAS_ADDR_REG( 7 downto 2) <= AD_REG( 7 downto 2);
                -- else
                --         CONF_BAS_ADDR_REG( 7 downto 2) <= CONF_BAS_ADDR_REG( 7 downto 2);
                -- end if;

                if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
                        CONF_BAS_ADDR_REG( 7 downto 4) <= AD_REG( 7 downto 4);
                else
                        CONF_BAS_ADDR_REG( 7 downto 4) <= CONF_BAS_ADDR_REG( 7 downto 4);
                end if;
        end if;
end process;

CONF_DATA_10H <= CONF_BAS_ADDR_REG;

end architecture CONFIG_10H_DESIGN;