+= read registers from userland

[raggedstone] / dhwk / source / pci / comm_dec.vhd

-- J.STELZNER
-- INFORMATIK-3 LABOR
-- 23.08.2006
-- File: COMM_DEC.VHD

library ieee;
use ieee.std_logic_1164.all ;

entity COMM_DEC is
        port
        (
                PCI_CLOCK :in std_logic;
                PCI_RSTn :in std_logic;
                MY_ADDR :in std_logic;
                IDSEL_REG :in std_logic;
                FRAME_REGn :in std_logic;
                IO_SPACE :in std_logic;
                AD_REG :in std_logic_vector(31 downto 0);
                CBE_REGn :in std_logic_vector( 3 downto 0);
                LAR :out std_logic; --LOAD_ADDR_REG
                IO_READ :out std_logic;
                IO_WRITE :out std_logic;
                CONF_READ :out std_logic;
                CONF_WRITE :out std_logic;
                SERR_CHECK :out std_logic
        );
end entity COMM_DEC ;

architecture COMM_DEC_DESIGN of COMM_DEC is


 --PCI Bus Commands
 --C/BE[3..0] Command Type
 --------------------------------------
 -- 0000 Interrupt Acknowledge
 -- 0001 Special Cycle
 -- 0010 I/O Read
 -- 0011 I/O Write
 -- 0100 Reserved
 -- 0101 Reserved
 -- 0110 Memory Read
 -- 0111 Memory Write
 --
 -- 1000 Reserved
 -- 1001 Reserved
 -- 1010 Configuration Read
 -- 1011 Configuration Write
 -- 1100 Memory Read Multiple
 -- 1101 Dual Address Cycle
 -- 1110 Memory Read Line
 -- 1111 Memory Write and Invalidate


 --PCI Byte Enable
 --C/BE[3..0] gueltige Datenbits
 -------------------------------
 -- 0000 AD 31..0
 -- 1000 AD 23..0
 -- 1100 AD 15..0
 -- 1110 AD 7..0

        constant cmd_int_ack :std_logic_vector(3 downto 0) := "0000";
        constant cmd_sp_cyc :std_logic_vector(3 downto 0) := "0001";
        constant cmd_io_read :std_logic_vector(3 downto 0) := "0010";
        constant cmd_io_write :std_logic_vector(3 downto 0) := "0011";
        constant cmd_res_4 :std_logic_vector(3 downto 0) := "0100";
        constant cmd_res_5 :std_logic_vector(3 downto 0) := "0101";
        constant cmd_mem_read :std_logic_vector(3 downto 0) := "0110";
        constant cmd_mem_write :std_logic_vector(3 downto 0) := "0111";
        constant cmd_res_8 :std_logic_vector(3 downto 0) := "1000";
        constant cmd_res_9 :std_logic_vector(3 downto 0) := "1001";
        constant cmd_conf_read :std_logic_vector(3 downto 0) := "1010";
        constant cmd_conf_write :std_logic_vector(3 downto 0) := "1011";
        constant cmd_mem_read_m :std_logic_vector(3 downto 0) := "1100";
        constant cmd_du_adr_cyc :std_logic_vector(3 downto 0) := "1101";
        constant cmd_mem_read_l :std_logic_vector(3 downto 0) := "1110";
        constant cmd_mem_write_i :std_logic_vector(3 downto 0) := "1111";

        signal START :std_logic;
        signal FRAME_REG_REGn :std_logic;

        signal SIG_IO_READ :std_logic;
        signal SIG_IO_WRITE :std_logic;
        signal SIG_CONF_READ :std_logic;
        signal SIG_CONF_WRITE :std_logic;

begin

        process (PCI_CLOCK, PCI_RSTn)
        begin
                if PCI_RSTn = '0' then FRAME_REG_REGn <= '1';
        elsif (rising_edge(PCI_CLOCK)) then

                FRAME_REG_REGn <= FRAME_REGn;

        end if;
end process;


START <= (not FRAME_REGn) and FRAME_REG_REGn;



SIG_IO_READ <= '1' when START = '1'
               and IO_SPACE = '1'
               and CBE_REGn = cmd_io_read
               and MY_ADDR = '1'
       else '0';


SIG_IO_WRITE <= '1' when START = '1'
                and IO_SPACE = '1'
                and CBE_REGn = cmd_io_write
                and MY_ADDR = '1'
        else '0';


SIG_CONF_READ <= '1' when START = '1'
                and AD_REG(1 downto 0) = "00"
                and CBE_REGn = cmd_conf_read
                and IDSEL_REG = '1'

        else '0';


SIG_CONF_WRITE <= '1' when START = '1'
                and AD_REG(1 downto 0) = "00"
                and CBE_REGn = cmd_conf_write
                and IDSEL_REG = '1'
        else '0';

LAR <= START;

SERR_CHECK <= SIG_IO_READ or SIG_IO_WRITE or SIG_CONF_READ or SIG_CONF_WRITE;

IO_READ <= SIG_IO_READ;
IO_WRITE <= SIG_IO_WRITE;
CONF_READ <= SIG_CONF_READ;
CONF_WRITE <= SIG_CONF_WRITE;

end architecture COMM_DEC_DESIGN;