]> git.zerfleddert.de Git - raggedstone/blame_incremental - dhwk/source/pci/config_wr_0.vhd
white space; fixme
[raggedstone] / dhwk / source / pci / config_wr_0.vhd
... / ...
CommitLineData
1-- J.STELZNER
2-- INFORMATIK-3 LABOR
3-- 23.08.2006
4-- File: CONFIG_WR_0.VHD
5
6library IEEE;
7use IEEE.std_logic_1164.all;
8
9entity CONFIG_WR_0 is
10 port
11 (
12 ADDR_REG :in std_logic_vector(31 downto 0);
13 CF_WR_COM :in std_logic;
14 IRDY_REGn :in std_logic;
15 TRDYn :in std_logic;
16 CONF_WR_04H :out std_logic;
17 CONF_WR_10H :out std_logic;
18 CONF_WR_3CH :out std_logic
19 --CONF_WR_40H :out std_logic
20 );
21end entity CONFIG_WR_0;
22
23architecture CONFIG_WR_0_DESIGN of CONFIG_WR_0 is
24
25 --
26 --
27 --
28 --
29 --
30 -- PCI Configuration Space Header
31 --
32 -- \ Bit
33 -- \
34 --Address |31 24|23 16|15 8|7 0|
35 -----------------------------------------------------------------
36 --00 |Device ID |Vendor ID |
37 --04 |Status |Command |
38 --08 |Class Code |Revision ID |
39 --0C |BIST |Header Type |Latency T. |Cache L.S. |
40 --10-24 |Base Address Register |
41 --28 |Cardbus CIS Pointer |
42 --2C |Subsystem ID |Subsystem Vendor ID |
43 --30 |Expansion ROM Base Address |
44 --34 |Reserved |
45 --38 |Reserved |
46 --3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line |
47 --40-FF | |
48 -----------------------------------------------------------------
49
50
51 --PCI Bus Commands
52 --C/BE[3..0] Command Type
53 --------------------------------------
54 -- 0000 Interrupt Acknowledge
55 -- 0001 Special Cycle
56 -- 0010 I/O Read
57 -- 0011 I/O Write
58 -- 0100 Reserved
59 -- 0101 Reserved
60 -- 0110 Memory Read
61 -- 0111 Memory Write
62 --
63 -- 1000 Reserved
64 -- 1001 Reserved
65 -- 1010 Configuration Read
66 -- 1011 Configuration Write
67 -- 1100 Memory Read Multiple
68 -- 1101 Dual Address Cycle
69 -- 1110 Memory Read Line
70 -- 1111 Memory Write and Invalidate
71
72
73 --PCI Byte Enable
74 --C/BE[3..0] gueltige Datenbits
75 -------------------------------
76 -- 0000 AD 31..0
77 -- 1000 AD 23..0
78 -- 1100 AD 15..0
79 -- 1110 AD 7..0
80
81 constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000";
82 constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001";
83 constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010";
84 constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011";
85 constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100";
86 constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101";
87 constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110";
88 constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111";
89 constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000";
90 constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001";
91 constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010";
92 constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011";
93 constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100";
94 constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101";
95 constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110";
96 constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111";
97
98 signal CONFIG_ADDR :std_logic_vector(7 downto 0);
99 signal CONFIG_WRITE :std_logic_vector(3 downto 0);
100
101
102begin
103
104 --*******************************************************************
105 --******************* PCI Write Configuration Address ***************
106 --*******************************************************************
107
108 CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0);
109
110
111 process (CF_WR_COM,IRDY_REGn,TRDYn,CONFIG_ADDR)
112 begin
113
114 if CF_WR_COM = '1' and IRDY_REGn = '0' and TRDYn = '0' then
115
116 if CONFIG_ADDR = X"04" then
117 CONFIG_WRITE <= "0001";
118
119 elsif CONFIG_ADDR = X"10" then
120 CONFIG_WRITE <= "0010";
121
122 elsif CONFIG_ADDR = X"3C" then
123 CONFIG_WRITE <= "0100";
124
125 -- elsif CONFIG_ADDR = X"40" then
126 -- CONFIG_WRITE <= "1000";
127 else
128 CONFIG_WRITE <= "0000";
129 end if;
130 else
131 CONFIG_WRITE <= "0000";
132 end if;
133 end process;
134
135 CONF_WR_04H <= CONFIG_WRITE(0);
136 CONF_WR_10H <= CONFIG_WRITE(1);
137 CONF_WR_3CH <= CONFIG_WRITE(2);
138 --CONF_WR_40H <= CONFIG_WRITE(3);
139
140end architecture CONFIG_WR_0_DESIGN;
Impressum, Datenschutz