typo

[raggedstone] / ethernet / source / pci / pci_wb_tpram.v

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Generic Two-Port Synchronous RAM                            ////
////                                                              ////
////  This file is part of pci bridge project                     ////
////  http://www.opencores.org/cvsweb.shtml/pci/                  ////
////                                                              ////
////  Description                                                 ////
////  This block is a wrapper with common two-port                ////
////  synchronous memory interface for different                  ////
////  types of ASIC and FPGA RAMs. Beside universal memory        ////
////  interface it also provides behavioral model of generic      ////
////  two-port synchronous RAM.                                   ////
////  It should be used in all OPENCORES designs that want to be  ////
////  portable accross different target technologies and          ////
////  independent of target memory.                               ////
////                                                              ////
////  Supported ASIC RAMs are:                                    ////
////  - Artisan Double-Port Sync RAM                              ////
////  - Avant! Two-Port Sync RAM (*)                              ////
////  - Virage 2-port Sync RAM                                    ////
////                                                              ////
////  Supported FPGA RAMs are:                                    ////
////  - Xilinx Virtex RAMB4_S16_S16                               ////
////                                                              ////
////  To Do:                                                      ////
////   - fix Avant!                                               ////
////   - xilinx rams need external tri-state logic                ////
////   - add additional RAMs (Altera, VS etc)                     ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////      - Miha Dolenc, mihad@opencores.org                      ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: pci_wb_tpram.v,v $
// Revision 1.1  2007-03-20 17:50:56  sithglan
// add shit
//
// Revision 1.4  2004/08/19 15:27:34  mihad
// Changed minimum pci image size to 256 bytes because
// of some PC system problems with size of IO images.
//
// Revision 1.3  2003/10/17 09:11:52  markom
// mbist signals updated according to newest convention
//
// Revision 1.2  2003/08/14 13:06:03  simons
// synchronizer_flop replaced with pci_synchronizer_flop, artisan ram instance updated.
//
// Revision 1.1  2003/01/27 16:49:31  mihad
// Changed module and file names. Updated scripts accordingly. FIFO synchronizations changed.
//
// Revision 1.7  2002/10/18 03:36:37  tadejm
// Changed wrong signal name mbist_sen into mbist_ctrl_i.
//
// Revision 1.6  2002/10/17 22:49:22  tadejm
// Changed BIST signals for RAMs.
//
// Revision 1.5  2002/10/11 10:09:01  mihad
// Added additional testcase and changed rst name in BIST to trst
//
// Revision 1.4  2002/10/08 17:17:06  mihad
// Added BIST signals for RAMs.
//
// Revision 1.3  2002/09/30 17:22:27  mihad
// Added support for Virtual Silicon two port RAM. Didn't run regression on it yet!
//
// Revision 1.2  2002/08/19 16:51:36  mihad
// Extracted distributed RAM module from wb/pci_tpram.v to its own file, got rid of undef directives
//
// Revision 1.1  2002/02/01 14:43:31  mihad
// *** empty log message ***
//
//

// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "pci_constants.v"

module pci_wb_tpram
(
        // Generic synchronous two-port RAM interface
        clk_a,
    rst_a,
    ce_a,
    we_a,
    oe_a,
    addr_a,
    di_a,
    do_a,
        clk_b,
    rst_b,
    ce_b,
    we_b,
    oe_b,
    addr_b,
    di_b,
    do_b
`ifdef PCI_BIST
    ,
    // debug chain signals
    mbist_si_i,       // bist scan serial in
    mbist_so_o,       // bist scan serial out
    mbist_ctrl_i        // bist chain shift control
`endif
);

//
// Default address and data buses width
//
parameter aw = 8;
parameter dw = 40;

//
// Generic synchronous two-port RAM interface
//
input                   clk_a;  // Clock
input                   rst_a;  // Reset
input                   ce_a;   // Chip enable input
input                   we_a;   // Write enable input
input                   oe_a;   // Output enable input
input   [aw-1:0]        addr_a; // address bus inputs
input   [dw-1:0]        di_a;   // input data bus
output  [dw-1:0]        do_a;   // output data bus
input                   clk_b;  // Clock
input                   rst_b;  // Reset
input                   ce_b;   // Chip enable input
input                   we_b;   // Write enable input
input                   oe_b;   // Output enable input
input   [aw-1:0]        addr_b; // address bus inputs
input   [dw-1:0]        di_b;   // input data bus
output  [dw-1:0]        do_b;   // output data bus

`ifdef PCI_BIST
// debug chain signals
input   mbist_si_i;       // bist scan serial in
output  mbist_so_o;       // bist scan serial out
input [`PCI_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;       // bist chain shift control
`endif

//
// Internal wires and registers
//

`ifdef WB_VS_STP
    `define PCI_WB_RAM_SELECTED
    `ifdef PCI_BIST
        vs_hdtp_64x40_bist i_vs_hdtp_64x40_bist
    `else
        vs_hdtp_64x40 i_vs_hdtp_64x40
    `endif
        (
            .RCK        (clk_b),
            .WCK        (clk_a),
            .RADR       (addr_b),
            .WADR       (addr_a),
            .DI         (di_a),
            .DOUT       (do_b),
            .REN        (1'b0),
            .WEN        (!we_a)
        `ifdef PCI_BIST
            ,
            // debug chain signals
            .mbist_si_i   (mbist_si_i),
            .mbist_so_o   (mbist_so_o),
            .mbist_ctrl_i   (mbist_ctrl_i)
        `endif
        );
    
    assign do_a = 0 ;
`endif

`ifdef WB_ARTISAN_SDP
    `define PCI_WB_RAM_SELECTED
    //
    // Instantiation of ASIC memory:
    //
    // Artisan Synchronous Double-Port RAM (ra2sh)
    //
    `ifdef PCI_BIST
        art_hsdp_64x40_bist /*#(dw, 1<<aw, aw) */ artisan_sdp
        (
                .QA(do_a),
                .CLKA(clk_a),
                .CENA(~ce_a),
                .WENA(~we_a),
                .AA(addr_a),
                .DA(di_a),
                .OENA(~oe_a),
                .QB(do_b),
                .CLKB(clk_b),
                .CENB(~ce_b),
                .WENB(~we_b),
                .AB(addr_b),
                .DB(di_b),
                .OENB(~oe_b),
          .mbist_si_i   (mbist_si_i),
          .mbist_so_o   (mbist_so_o),
          .mbist_ctrl_i   (mbist_ctrl_i)
        );
    `else
        art_hsdp_64x40 /*#(dw, 1<<aw, aw) */ artisan_sdp
        (
                .QA(do_a),
                .CLKA(clk_a),
                .CENA(~ce_a),
                .WENA(~we_a),
                .AA(addr_a),
                .DA(di_a),
                .OENA(~oe_a),
                .QB(do_b),
                .CLKB(clk_b),
                .CENB(~ce_b),
                .WENB(~we_b),
                .AB(addr_b),
                .DB(di_b),
                .OENB(~oe_b)
        );
    `endif
`endif

`ifdef AVANT_ATP
    `define PCI_WB_RAM_SELECTED
    //
    // Instantiation of ASIC memory:
    //
    // Avant! Asynchronous Two-Port RAM
    //
    avant_atp avant_atp(
        .web(~we),
        .reb(),
        .oeb(~oe),
        .rcsb(),
        .wcsb(),
        .ra(addr),
        .wa(addr),
        .di(di),
        .do(do)
    );

`endif

`ifdef VIRAGE_STP
    `define PCI_WB_RAM_SELECTED
    //
    // Instantiation of ASIC memory:
    //
    // Virage Synchronous 2-port R/W RAM
    //
    virage_stp virage_stp(
        .QA(do_a),
        .QB(do_b),

        .ADRA(addr_a),
        .DA(di_a),
        .WEA(we_a),
        .OEA(oe_a),
        .MEA(ce_a),
        .CLKA(clk_a),

        .ADRB(adr_b),
        .DB(di_b),
        .WEB(we_b),
        .OEB(oe_b),
        .MEB(ce_b),
        .CLKB(clk_b)
    );

`endif

`ifdef WB_XILINX_DIST_RAM
    `define PCI_WB_RAM_SELECTED

    reg [(aw-1):0] out_address ;
    always@(posedge clk_b or posedge rst_b)
    begin
        if ( rst_b )
            out_address <= #1 0 ;
        else if (ce_b)
            out_address <= #1 addr_b ;
    end

    pci_ram_16x40d #(aw) wb_distributed_ram
    (
        .data_out       (do_b),
        .we             (we_a),
        .data_in        (di_a),
        .read_address   (out_address),
        .write_address  (addr_a),
        .wclk           (clk_a)
    );
    assign do_a = 0 ;
`endif
`ifdef WB_XILINX_RAMB4
    `define PCI_WB_RAM_SELECTED
    //
    // Instantiation of FPGA memory:
    //
    // Virtex/Spartan2
    //

    //
    // Block 0
    //

    RAMB4_S16_S16 ramb4_s16_s16_0(
        .CLKA(clk_a),
        .RSTA(rst_a),
        .ADDRA(addr_a),
        .DIA(di_a[15:0]),
        .ENA(ce_a),
        .WEA(we_a),
        .DOA(do_a[15:0]),

        .CLKB(clk_b),
        .RSTB(rst_b),
        .ADDRB(addr_b),
        .DIB(di_b[15:0]),
        .ENB(ce_b),
        .WEB(we_b),
        .DOB(do_b[15:0])
    );

    //
    // Block 1
    //

    RAMB4_S16_S16 ramb4_s16_s16_1(
        .CLKA(clk_a),
        .RSTA(rst_a),
        .ADDRA(addr_a),
        .DIA(di_a[31:16]),
        .ENA(ce_a),
        .WEA(we_a),
        .DOA(do_a[31:16]),

        .CLKB(clk_b),
        .RSTB(rst_b),
        .ADDRB(addr_b),
        .DIB(di_b[31:16]),
        .ENB(ce_b),
        .WEB(we_b),
        .DOB(do_b[31:16])
    );

    //
    // Block 2
    //
    // block ram2 wires - non generic width of block rams
    wire [15:0] blk2_di_a = {8'h00, di_a[39:32]} ;
    wire [15:0] blk2_di_b = {8'h00, di_b[39:32]} ;

    wire [15:0] blk2_do_a ;
    wire [15:0] blk2_do_b ;

    assign do_a[39:32] = blk2_do_a[7:0] ;
    assign do_b[39:32] = blk2_do_b[7:0] ;

    RAMB4_S16_S16 ramb4_s16_s16_2(
            .CLKA(clk_a),
            .RSTA(rst_a),
            .ADDRA(addr_a),
            .DIA(blk2_di_a),
            .ENA(ce_a),
            .WEA(we_a),
            .DOA(blk2_do_a),

            .CLKB(clk_b),
            .RSTB(rst_b),
            .ADDRB(addr_b),
            .DIB(blk2_di_b),
            .ENB(ce_b),
            .WEB(we_b),
            .DOB(blk2_do_b)
    );

`endif

`ifdef PCI_WB_RAM_SELECTED
`else
    //
    // Generic two-port synchronous RAM model
    //

    //
    // Generic RAM's registers and wires
    //
    reg [dw-1:0]        mem [(1<<aw)-1:0];      // RAM content
    reg [dw-1:0]        do_reg_b;               // RAM data output register

    //
    // Data output drivers
    //
    assign do_a = {dw{1'b0}}    ;
    assign do_b = do_reg_b      ;

    //
    // RAM read and write
    //
    always @(posedge clk_a)
        if (ce_a && we_a)
                mem[addr_a] <= #1 di_a;

    //
    // RAM read and write
    //
    always @(posedge clk_b)
        if (ce_b)
                do_reg_b <= #1 mem[addr_b];
`endif

// synopsys translate_off
initial
begin
    if (dw !== 40)
    begin
        $display("RAM instantiation error! Expected RAM width %d, actual %h!", 40, dw) ;
        $finish ;
    end
    `ifdef XILINX_RAMB4
        if (aw !== 8)
        begin
            $display("RAM instantiation error! Expected RAM address width %d, actual %h!", 40, aw) ;
            $finish ;
        end
    `endif
    // currenlty only artisan ram of depth 256 is supported - they don't provide generic ram models
    `ifdef ARTISAN_SDP
        if (aw !== 8)
        begin
            $display("RAM instantiation error! Expected RAM address width %d, actual %h!", 40, aw) ;
            $finish ;
        end
    `endif
end
// synopsys translate_on

endmodule