git.zerfleddert.de Git - raggedstone/blob - xps/raggedstone.mhs

   1 # ##############################################################################
   2 # Created by Base System Builder Wizard for Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
   3 # Thu Mar 22 21:42:23 2007
   4 # Target Board:  Custom
   5 # Family:        spartan3
   6 # Device:        xc3s1500
   7 # Package:       fg456
   8 # Speed Grade:   -4
   9 # Processor: Microblaze
  10 # System clock frequency: 50.000000 MHz
  11 # Debug interface: On-Chip HW Debug Module
  12 # On Chip Memory :  64 KB
  13 # ##############################################################################
  14
  15
  16  PARAMETER VERSION = 2.1.0
  17
  18
  19  PORT fpga_0_RS232_req_to_send_pin = net_gnd, DIR = O
  20  PORT fpga_0_RS232_RX_pin = fpga_0_RS232_RX, DIR = I
  21  PORT fpga_0_RS232_TX_pin = fpga_0_RS232_TX, DIR = O
  22  PORT sys_clk_pin = dcm_clk_s, DIR = I, SIGIS = CLK, CLK_FREQ = 50000000
  23  PORT sys_rst_pin = sys_rst_s, DIR = I, RST_POLARITY = 0, SIGIS = RST
  24  PORT RS232foff = net_vcc, DIR = O
  25  PORT LED_out = GPIO_LED_out, VEC = [0:3], DIR = O
  26  PORT MEM_FLASH_DQ = FLASH_DQ, DIR = IO, VEC = [7:0]
  27  PORT MEM_FLASH_ADDR = FLASH_ADDR, DIR = O, VEC = [18:0]
  28  PORT MEM_FLASH_CE = FLASH_CEN, DIR = O, VEC = [0:0]
  29  PORT MEM_FLASH_OE = FLASH_OEN, DIR = O, VEC = [0:0]
  30  PORT MEM_FLASH_WE = FLASH_WEN, DIR = O
  31  PORT SEVENSEG_out = GPIO_7SEG_OUT, DIR = O, VEC = [0:12]
  32  PORT DBG_FLASH_ADDR = FLASH_ADDR_split, DIR = O, VEC = [0:31]
  33
  34
  35 BEGIN opb_v20
  36  PARAMETER INSTANCE = mb_opb
  37  PARAMETER HW_VER = 1.10.c
  38  PARAMETER C_EXT_RESET_HIGH = 0
  39  PORT SYS_Rst = sys_rst_s
  40  PORT OPB_Clk = sys_clk_s
  41 END
  42
  43 BEGIN opb_mdm
  44  PARAMETER INSTANCE = debug_module
  45  PARAMETER HW_VER = 2.00.a
  46  PARAMETER C_MB_DBG_PORTS = 1
  47  PARAMETER C_USE_UART = 0
  48  PARAMETER C_BASEADDR = 0x41400000
  49  PARAMETER C_HIGHADDR = 0x4140ffff
  50  BUS_INTERFACE SOPB = mb_opb
  51 END
  52
  53 BEGIN lmb_v10
  54  PARAMETER INSTANCE = ilmb
  55  PARAMETER HW_VER = 1.00.a
  56  PARAMETER C_EXT_RESET_HIGH = 0
  57  PORT SYS_Rst = sys_rst_s
  58  PORT LMB_Clk = sys_clk_s
  59 END
  60
  61 BEGIN lmb_v10
  62  PARAMETER INSTANCE = dlmb
  63  PARAMETER HW_VER = 1.00.a
  64  PARAMETER C_EXT_RESET_HIGH = 0
  65  PORT SYS_Rst = sys_rst_s
  66  PORT LMB_Clk = sys_clk_s
  67 END
  68
  69 BEGIN bram_block
  70  PARAMETER INSTANCE = lmb_bram
  71  PARAMETER HW_VER = 1.00.a
  72  BUS_INTERFACE PORTA = dlmb_cntlr_BRAM_PORT
  73  BUS_INTERFACE PORTB = ilmb_cntlr_BRAM_PORT
  74 END
  75
  76 BEGIN opb_uartlite
  77  PARAMETER INSTANCE = RS232
  78  PARAMETER HW_VER = 1.00.b
  79  PARAMETER C_BAUDRATE = 115200
  80  PARAMETER C_DATA_BITS = 8
  81  PARAMETER C_ODD_PARITY = 1
  82  PARAMETER C_USE_PARITY = 0
  83  PARAMETER C_CLK_FREQ = 50000000
  84  PARAMETER C_BASEADDR = 0x40600000
  85  PARAMETER C_HIGHADDR = 0x4060ffff
  86  BUS_INTERFACE SOPB = mb_opb
  87  PORT RX = fpga_0_RS232_RX
  88  PORT TX = fpga_0_RS232_TX
  89 END
  90
  91 BEGIN dcm_module
  92  PARAMETER INSTANCE = dcm_0
  93  PARAMETER HW_VER = 1.00.c
  94  PARAMETER C_CLK0_BUF = TRUE
  95  PARAMETER C_CLKIN_PERIOD = 20.000000
  96  PARAMETER C_CLK_FEEDBACK = 1X
  97  PARAMETER C_DLL_FREQUENCY_MODE = LOW
  98  PARAMETER C_EXT_RESET_HIGH = 1
  99  PORT CLKIN = dcm_clk_s
 100  PORT CLK0 = sys_clk_s
 101  PORT CLKFB = sys_clk_s
 102  PORT RST = net_gnd
 103  PORT LOCKED = dcm_0_lock
 104 END
 105
 106 BEGIN opb_gpio
 107  PARAMETER INSTANCE = LEDS
 108  PARAMETER HW_VER = 3.01.b
 109  PARAMETER C_GPIO_WIDTH = 4
 110  PARAMETER C_IS_BIDIR = 0
 111  PARAMETER C_BASEADDR = 0x40020000
 112  PARAMETER C_HIGHADDR = 0x4002ffff
 113  BUS_INTERFACE SOPB = mb_opb
 114  PORT GPIO_d_out = GPIO_LED_out
 115 END
 116
 117 BEGIN opb_emc
 118  PARAMETER INSTANCE = FLASH
 119  PARAMETER HW_VER = 2.00.a
 120  PARAMETER C_NUM_BANKS_MEM = 1
 121  PARAMETER C_MAX_MEM_WIDTH = 8
 122  PARAMETER C_MEM0_WIDTH = 8
 123  PARAMETER C_TCEDV_PS_MEM_0 = 70000
 124  PARAMETER C_TAVDV_PS_MEM_0 = 70000
 125  PARAMETER C_THZCE_PS_MEM_0 = 25000
 126  PARAMETER C_TWC_PS_MEM_0 = 110000
 127  PARAMETER C_TWP_PS_MEM_0 = 70000
 128  PARAMETER C_TLZWE_PS_MEM_0 = 15000
 129  PARAMETER C_OPB_CLK_PERIOD_PS = 20000
 130  PARAMETER C_THZOE_PS_MEM_0 = 25000
 131  PARAMETER C_INCLUDE_DATAWIDTH_MATCHING_0 = 1
 132  PARAMETER C_MEM0_BASEADDR = 0x20000000
 133  PARAMETER C_MEM0_HIGHADDR = 0x2007FFFF
 134  PARAMETER C_INCLUDE_NEGEDGE_IOREGS = 0
 135  BUS_INTERFACE SOPB = mb_opb
 136  PORT Mem_A = FLASH_ADDR_split
 137  PORT Mem_CEN = FLASH_CEN
 138  PORT Mem_OEN = FLASH_OEN
 139  PORT Mem_WEN = FLASH_WEN
 140  PORT Mem_DQ = FLASH_DQ
 141 END
 142
 143 BEGIN opb_gpio
 144  PARAMETER INSTANCE = SEVENSEG
 145  PARAMETER HW_VER = 3.01.b
 146  PARAMETER C_GPIO_WIDTH = 13
 147  PARAMETER C_BASEADDR = 0x40000000
 148  PARAMETER C_HIGHADDR = 0x4000ffff
 149  BUS_INTERFACE SOPB = mb_opb
 150  PORT GPIO_d_out = GPIO_7SEG_OUT
 151 END
 152
 153 BEGIN chipscope_icon
 154  PARAMETER INSTANCE = chipscope_icon_0
 155  PARAMETER HW_VER = 1.01.a
 156  PORT control0 = ila_control0
 157 END
 158
 159 BEGIN chipscope_ila
 160  PARAMETER INSTANCE = chipscope_ila_0
 161  PARAMETER HW_VER = 1.01.a
 162  PARAMETER C_NUM_DATA_SAMPLES = 1024
 163  PARAMETER C_TRIG0_TRIGGER_IN_WIDTH = 19
 164  PARAMETER C_TRIG1_UNITS = 0
 165  PARAMETER C_TRIG2_UNITS = 0
 166  PARAMETER C_TRIG0_UNITS = 1
 167  PORT CHIPSCOPE_ILA_CONTROL = ila_control0
 168  PORT CLK = sys_clk_s
 169  PORT TRIG0 = FLASH_ADDR
 170 END
 171
 172 BEGIN util_bus_split
 173  PARAMETER INSTANCE = flash_split
 174  PARAMETER HW_VER = 1.00.a
 175  PARAMETER C_SIZE_IN = 32
 176  PARAMETER C_SPLIT = 13
 177  PORT Sig = FLASH_ADDR_split
 178  PORT Out2 = FLASH_ADDR
 179 END
 180
 181 BEGIN microblaze
 182  PARAMETER INSTANCE = microblaze_0
 183  PARAMETER HW_VER = 6.00.b
 184  PARAMETER C_DEBUG_ENABLED = 1
 185  PARAMETER C_NUMBER_OF_PC_BRK = 2
 186  BUS_INTERFACE DOPB = mb_opb
 187  BUS_INTERFACE IOPB = mb_opb
 188  BUS_INTERFACE ILMB = ilmb
 189  BUS_INTERFACE DLMB = dlmb
 190 END
 191
 192 BEGIN lmb_bram_if_cntlr
 193  PARAMETER INSTANCE = dlmb_cntlr
 194  PARAMETER HW_VER = 2.00.a
 195  PARAMETER C_BASEADDR = 0x00000000
 196  PARAMETER C_HIGHADDR = 0x00007FFF
 197  BUS_INTERFACE SLMB = dlmb
 198  BUS_INTERFACE BRAM_PORT = dlmb_cntlr_BRAM_PORT
 199 END
 200
 201 BEGIN lmb_bram_if_cntlr
 202  PARAMETER INSTANCE = ilmb_cntlr
 203  PARAMETER HW_VER = 2.00.a
 204  PARAMETER C_BASEADDR = 0x00000000
 205  PARAMETER C_HIGHADDR = 0x00007FFF
 206  BUS_INTERFACE SLMB = ilmb
 207  BUS_INTERFACE BRAM_PORT = ilmb_cntlr_BRAM_PORT
 208 END
 209