////////////////////////////////////////////////////////////////////// //// //// //// File name "pci_user_constants.v" //// //// //// //// This file is part of the "PCI bridge" project //// //// http://www.opencores.org/cores/pci/ //// //// //// //// Author(s): //// //// - Miha Dolenc (mihad@opencores.org) //// //// - Tadej Markovic (tadej@opencores.org) //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Miha Dolenc, mihad@opencores.org //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: pci_user_constants.v,v $ // Revision 1.3 2007-03-21 11:53:06 sithglan // enable address translation // // Revision 1.2 2007/03/20 20:56:19 sithglan // changes // // Revision 1.1 2007/03/20 17:50:56 sithglan // add shit // // Revision 1.15 2004/08/19 15:27:34 mihad // Changed minimum pci image size to 256 bytes because // of some PC system problems with size of IO images. // // Revision 1.14 2004/07/07 12:45:01 mihad // Added SubsystemVendorID, SubsystemID, MAXLatency, MinGnt defines. // Enabled value loading from serial EEPROM for all of the above + VendorID and DeviceID registers. // // Revision 1.13 2004/01/24 11:54:18 mihad // Update! SPOCI Implemented! // // Revision 1.12 2003/12/28 09:54:48 fr2201 // def_wb_imagex_addr_map defined correctly // // Revision 1.11 2003/12/28 09:20:00 fr2201 // Reset values for PCI, WB defined (PCI_TAx,WB_BAx,WB_TAx,WB_AMx,WB_BAx_MEM_IO) // // Revision 1.10 2003/12/19 11:11:30 mihad // Compact PCI Hot Swap support added. // New testcases added. // Specification updated. // Test application changed to support WB B3 cycles. // // Revision 1.9 2003/08/03 18:05:06 mihad // Added limited WISHBONE B3 support for WISHBONE Slave Unit. // Doesn't support full speed bursts yet. // // Revision 1.8 2003/03/14 15:31:57 mihad // Entered the option to disable no response counter in wb master. // // Revision 1.7 2003/01/27 17:05:50 mihad // Updated. // // Revision 1.6 2003/01/27 16:51:19 mihad // Old files with wrong names removed. // // Revision 1.5 2003/01/21 16:06:56 mihad // Bug fixes, testcases added. // // Revision 1.4 2002/09/30 17:22:45 mihad // Added support for Virtual Silicon two port RAM. Didn't run regression on it yet! // // Revision 1.3 2002/08/13 11:03:53 mihad // Added a few testcases. Repaired wrong reset value for PCI_AM5 register. Repaired Parity Error Detected bit setting. Changed PCI_AM0 to always enabled(regardles of PCI_AM0 define), if image 0 is used as configuration image // // Revision 1.2 2002/03/05 11:53:47 mihad // Added some testcases, removed un-needed fifo signals // // Revision 1.1 2002/02/01 14:43:31 mihad // *** empty log message *** // // // Fifo implementation defines: // If FPGA and XILINX are defined, Xilinx's BlockSelectRAM+ is instantiated for Fifo storage. // 16 bit width is used, so 8 bits of address ( 256 ) locations are available. If RAM_DONT_SHARE is not defined (commented out), // then one block RAM is shared between two FIFOs. That means each Fifo can have a maximum address length of 7 - depth of 128 and only 6 block rams are used // If RAM_DONT_SHARE is defined ( not commented out ), then 12 block RAMs are used and each Fifo can have a maximum address length of 8 ( 256 locations ) // If FPGA is not defined, then ASIC RAMs are used. Currently there is only one version of ARTISAN RAM supported. User should generate synchronous RAM with // width of 40 and instantiate it in pci_tpram.v. If RAM_DONT_SHARE is defined, then these can be dual port rams ( write port // in one clock domain, read in other ), otherwise it must be two port RAM ( read and write ports in both clock domains ). // If RAM_DONT_SHARE is defined, then all RAM address lengths must be specified accordingly, otherwise there are two relevant lengths - PCI_FIFO_RAM_ADDR_LENGTH and // WB_FIFO_RAM_ADDR_LENGTH. `define WBW_ADDR_LENGTH 4 `define WBR_ADDR_LENGTH 4 `define PCIW_ADDR_LENGTH 4 `define PCIR_ADDR_LENGTH 4 `define FPGA `define XILINX //`define WB_RAM_DONT_SHARE //`define PCI_RAM_DONT_SHARE `ifdef FPGA `ifdef XILINX `define PCI_FIFO_RAM_ADDR_LENGTH 8 // PCI target unit fifo storage definition `define WB_FIFO_RAM_ADDR_LENGTH 8 // WB slave unit fifo storage definition `define PCI_XILINX_RAMB4 `define WB_XILINX_RAMB4 //`define PCI_XILINX_DIST_RAM //`define WB_XILINX_DIST_RAM `endif `else `define PCI_FIFO_RAM_ADDR_LENGTH 3 // PCI target unit fifo storage definition when RAM sharing is used ( both pcir and pciw fifo use same instance of RAM ) `define WB_FIFO_RAM_ADDR_LENGTH 4 // WB slave unit fifo storage definition when RAM sharing is used ( both wbr and wbw fifo use same instance of RAM ) // `define WB_ARTISAN_SDP // `define PCI_ARTISAN_SDP // `define PCI_VS_STP // `define WB_VS_STP `endif // these two defines allow user to select active high or low output enables on PCI bus signals, depending on // output buffers instantiated. Xilinx FPGAs use active low output enables. `define ACTIVE_LOW_OE //`define ACTIVE_HIGH_OE // HOST/GUEST implementation selection - see design document and specification for description of each implementation // only one can be defined at same time //`define HOST `define GUEST // if NO_CNF_IMAGE is commented out, then READ-ONLY access to configuration space is ENABLED: // - ENABLED Read-Only access from WISHBONE for GUEST bridges // - ENABLED Read-Only access from PCI for HOST bridges // with defining NO_CNF_IMAGE, one decoder and one multiplexer are saved `define NO_CNF_IMAGE // number defined here specifies how many MS bits in PCI address are compared with base address, to decode // accesses. Maximum number allows for minimum image size ( number = 20, image size = 4KB ), minimum number // allows for maximum image size ( number = 1, image size = 2GB ). If you intend on using different sizes of PCI images, // you have to define a number of minimum sized image and enlarge others by specifying different address mask. // smaller the number here, faster the decoder operation `define PCI_NUM_OF_DEC_ADDR_LINES 19 // no. of PCI Target IMAGES // - PCI provides 6 base address registers for image implementation. // PCI_IMAGE1 definition is not required and has no effect, since PCI image 1 is always implemented // If GUEST is defined, PCI Image 0 is also always implemented and is used for configuration space // access. // If HOST is defined and NO_CNF_IMAGE is not, then PCI Image 0 is used for Read Only access to configuration // space. If HOST is defined and NO_CNF_IMAGE is defined, then user can define PCI_IMAGE0 as normal image, and there // is no access to Configuration space possible from PCI bus. // Implementation of all other PCI images is selected by defining PCI_IMAGE2 through PCI_IMAGE5 regardles of HOST // or GUEST implementation. `ifdef HOST `ifdef NO_CNF_IMAGE //`define PCI_IMAGE0 `endif `endif //`define PCI_IMAGE2 //`define PCI_IMAGE3 //`define PCI_IMAGE4 //`define PCI_IMAGE5 // initial value for PCI image address masks. Address masks can be defined in enabled state, // to allow device independent software to detect size of image and map base addresses to // memory space. If initial mask for an image is defined as 0, then device independent software // won't detect base address implemented and device dependent software will have to configure // address masks as well as base addresses! // Don't define PCI_AMx to 24'hffff_ff for memory images! Use that just for I/O images. `define PCI_AM0 24'hffff_f0 `define PCI_AM1 24'hffff_ff `define PCI_AM2 24'hffff_f0 `define PCI_AM3 24'hffff_f0 `define PCI_AM4 24'hffff_f0 `define PCI_AM5 24'hffff_f0 // initial value for PCI image maping to MEMORY or IO spaces. If initial define is set to 0, // then IMAGE with that base address points to MEMORY space, othervise it points ti IO space. D // Device independent software sets the base addresses acording to MEMORY or IO maping! `define PCI_BA0_MEM_IO 1'b0 // considered only when PCI_IMAGE0 is used as general PCI-WB image! `define PCI_BA1_MEM_IO 1'b1 `define PCI_BA2_MEM_IO 1'b0 `define PCI_BA3_MEM_IO 1'b0 `define PCI_BA4_MEM_IO 1'b0 `define PCI_BA5_MEM_IO 1'b0 // initial value for PCI translation addresses. The initial values // are set after reset. When ADDR_TRAN_IMPL is defined then then Images // are transleted to this adresses whithout access to pci_ta registers. `define PCI_TA0 24'h0000_0 `define PCI_TA1 24'h0000_0 `define PCI_TA2 24'h0000_0 `define PCI_TA3 24'h0000_0 `define PCI_TA4 24'h0000_0 `define PCI_TA5 24'h0000_0 `define PCI_AT_EN0 1'b0 `define PCI_AT_EN1 1'b0 `define PCI_AT_EN2 1'b0 `define PCI_AT_EN3 1'b0 `define PCI_AT_EN4 1'b0 `define PCI_AT_EN5 1'b0 // number defined here specifies how many MS bits in WB address are compared with base address, to decode // accesses. Maximum number allows for minimum image size ( number = 20, image size = 4KB ), minimum number // allows for maximum image size ( number = 1, image size = 2GB ). If you intend on using different sizes of WB images, // you have to define a number of minimum sized image and enlarge others by specifying different address mask. // smaller the number here, faster the decoder operation `define WB_NUM_OF_DEC_ADDR_LINES 1 // no. of WISHBONE Slave IMAGES // WB image 0 is always used for access to configuration space. In case configuration space access is not implemented, // ( both GUEST and NO_CNF_IMAGE defined ), then WB image 0 is not implemented. User doesn't need to define image 0. // WB Image 1 is always implemented and user doesnt need to specify its definition // WB images' 2 through 5 implementation by defining each one. //`define WB_IMAGE2 //`define WB_IMAGE3 //`define WB_IMAGE4 //`define WB_IMAGE5 //Address bar register defines the base address for each image. //To asccess bus without Software configuration. `define WB_BA1 20'h0000_0 `define WB_BA2 20'h8000_0 `define WB_BA3 20'h0000_0 `define WB_BA4 20'h0000_0 `define WB_BA5 20'h0000_0 // initial value for WB image maping to MEMORY or IO spaces. If initial define is set to 0, // then IMAGE with that base address points to MEMORY space, othervise it points ti IO space. `define WB_BA1_MEM_IO 1'b0 `define WB_BA2_MEM_IO 1'b0 `define WB_BA3_MEM_IO 1'b0 `define WB_BA4_MEM_IO 1'b0 `define WB_BA5_MEM_IO 1'b0 // initial value for WB image address masks. `define WB_AM1 20'h8000_0 `define WB_AM2 20'h8000_0 `define WB_AM3 20'h0000_0 `define WB_AM4 20'h0000_0 `define WB_AM5 20'h0000_0 // initial value for WB translation addresses. The initial values // are set after reset. When ADDR_TRAN_IMPL is defined then then Images // are transleted to this adresses whithout access to pci_ta registers. `define WB_TA1 20'h0000_0 `define WB_TA2 20'h0000_0 `define WB_TA3 20'h0000_0 `define WB_TA4 20'h0000_0 `define WB_TA5 20'h0000_0 `define WB_AT_EN1 1'b0 `define WB_AT_EN2 1'b0 `define WB_AT_EN3 1'b0 `define WB_AT_EN4 1'b0 `define WB_AT_EN5 1'b0 // If this define is commented out, then address translation will not be implemented. // addresses will pass through bridge unchanged, regardles of address translation enable bits. // Address translation also slows down the decoding //When ADDR_TRAN_IMPL this define is present then adress translation is enabled after reset. `define ADDR_TRAN_IMPL // decode speed for WISHBONE definition - initial cycle on WISHBONE bus will take 1 WS for FAST, 2 WSs for MEDIUM and 3 WSs for slow. // slower decode speed can be used, to provide enough time for address to be decoded. `define WB_DECODE_FAST //`define WB_DECODE_MEDIUM //`define WB_DECODE_SLOW // Base address for Configuration space access from WB bus. This value cannot be changed during runtime `define WB_CONFIGURATION_BASE 20'h0000_0 // Turn registered WISHBONE slave outputs on or off // all outputs from WB Slave state machine are registered, if this is defined - WB bus outputs as well as // outputs to internals of the core. //`define REGISTER_WBS_OUTPUTS /*----------------------------------------------------------------------------------------------------------- Core speed definition - used for simulation and 66MHz Capable bit value in status register indicating 66MHz capable device -----------------------------------------------------------------------------------------------------------*/ `define PCI33 //`define PCI66 /*----------------------------------------------------------------------------------------------------------- [000h-00Ch] First 4 DWORDs (32-bit) of PCI configuration header - the same regardless of the HEADER type ! Vendor_ID is an ID for a specific vendor defined by PCI_SIG - 2321h does not belong to anyone (e.g. Xilinx's Vendor_ID is 10EEh and Altera's Vendor_ID is 1172h). Device_ID and Revision_ID should be used together by application. -----------------------------------------------------------------------------------------------------------*/ `define HEADER_VENDOR_ID 16'h4242 `define HEADER_DEVICE_ID 16'h2323 `define HEADER_REVISION_ID 8'h01 `define HEADER_SUBSYS_VENDOR_ID 16'h4242 `define HEADER_SUBSYS_ID 16'h2323 `define HEADER_MAX_LAT 8'h1a `define HEADER_MIN_GNT 8'h08 // MAX Retry counter value for WISHBONE Master state-machine // This value is 8-bit because of 8-bit retry counter !!! `define WB_RTY_CNT_MAX 8'hff // define the macro below to disable internal retry generation in the wishbone master interface // used when wb master accesses extremly slow devices. `define PCI_WBM_NO_RESPONSE_CNT_DISABLE `define PCI_WB_REV_B3 //`define PCI_WBS_B3_RTY_DISABLE `ifdef GUEST // `define PCI_CPCI_HS_IMPLEMENT // `define PCI_SPOCI `endif