eth_cop

[raggedstone] / dhwk / source / pci / config_space_header.vhd

diff --git a/dhwk/source/pci/config_space_header.vhd b/dhwk/source/pci/config_space_header.vhd
index ca437c08b769237c7406b6166d39849ba95629dc..15db761375688bbf78f5f44f9071e2e50aa0d795 100644 (file)
--- a/dhwk/source/pci/config_space_header.vhd
+++ b/dhwk/source/pci/config_space_header.vhd
@@ -27,20 +27,6 @@ end CONFIG_SPACE_HEADER;
 
 architecture SCHEMATIC of CONFIG_SPACE_HEADER is
 
 
 architecture SCHEMATIC of CONFIG_SPACE_HEADER is
 

-        constant CONF_DEVICE_ID :std_logic_vector(31 downto 16) := X"AFFE";
-        --other comm. device
-        constant CONF_CLASS_CODE :std_logic_vector (31 downto 8) := X"078000";
-
-        signal CONF_MAX_LAT :std_logic_vector (31 downto 24);
-        signal CONF_MIN_GNT :std_logic_vector (23 downto 16);
-        signal CONF_INT_PIN :std_logic_vector (15 downto 8);
-        signal CONF_INT_LINE :std_logic_vector ( 7 downto 0);
-
-        signal CONF_BAS_ADDR_REG :std_logic_vector(31 downto 0);
-
-        signal CONF_STATUS :std_logic_vector(31 downto 16);
-        signal CONF_COMMAND :std_logic_vector(15 downto 0);
-

         SIGNAL gnd : std_logic := '0';
         SIGNAL vcc : std_logic := '1';
 
         SIGNAL gnd : std_logic := '0';
         SIGNAL vcc : std_logic := '1';
 


@@ -48,11 +34,22 @@ architecture SCHEMATIC of CONFIG_SPACE_HEADER is
         signal CONF_WR_10H : std_logic;
         signal CONF_WR_3CH : std_logic;
         signal CONF_READ_SEL : std_logic_vector (2 downto 0);
         signal CONF_WR_10H : std_logic;
         signal CONF_WR_3CH : std_logic;
         signal CONF_READ_SEL : std_logic_vector (2 downto 0);

+        signal CONF_DATA_10H_DUMMY : std_logic_vector (31 downto 0);

         signal CONF_DATA_04H_DUMMY : std_logic_vector (31 downto 0);
         signal CONF_DATA_3CH : std_logic_vector (31 downto 0);
         signal CONF_DATA_08H : std_logic_vector (31 downto 0);
         signal CONF_DATA_00H : std_logic_vector (31 downto 0);
 
         signal CONF_DATA_04H_DUMMY : std_logic_vector (31 downto 0);
         signal CONF_DATA_3CH : std_logic_vector (31 downto 0);
         signal CONF_DATA_08H : std_logic_vector (31 downto 0);
         signal CONF_DATA_00H : std_logic_vector (31 downto 0);
 

+        component CONFIG_MUX_0
+                Port ( CONF_DATA_00H : In std_logic_vector (31 downto 0);
+                       CONF_DATA_04H : In std_logic_vector (31 downto 0);
+                       CONF_DATA_08H : In std_logic_vector (31 downto 0);
+                       CONF_DATA_10H : In std_logic_vector (31 downto 0);
+                       CONF_DATA_3CH : In std_logic_vector (31 downto 0);
+                       READ_SEL : In std_logic_vector (2 downto 0);
+                       CONF_DATA : Out std_logic_vector (31 downto 0) );
+        end component;
+

         component CONFIG_RD_0
                 Port ( ADDR_REG : In std_logic_vector (31 downto 0);
                        CF_RD_COM : In std_logic;
         component CONFIG_RD_0
                 Port ( ADDR_REG : In std_logic_vector (31 downto 0);
                        CF_RD_COM : In std_logic;


@@ -69,25 +66,58 @@ architecture SCHEMATIC of CONFIG_SPACE_HEADER is
                        CONF_WR_3CH : Out std_logic );
         end component;
 
                        CONF_WR_3CH : Out std_logic );
         end component;
 

+        component CONFIG_3CH
+                Port ( AD_REG : In std_logic_vector (31 downto 0);
+                       CBE_REGn : In std_logic_vector (3 downto 0);
+                       CONF_WR_3CH : In std_logic;
+                       PCI_CLOCK : In std_logic;
+                       PCI_RSTn : In std_logic;
+                       CONF_DATA_3CH : Out std_logic_vector (31 downto 0) );
+        end component;
+
+        component CONFIG_10H
+                Port ( AD_REG : In std_logic_vector (31 downto 0);
+                       CBE_REGn : In std_logic_vector (3 downto 0);
+                       CONF_WR_10H : In std_logic;
+                       PCI_CLOCK : In std_logic;
+                       PCI_RSTn : In std_logic;
+                       CONF_DATA_10H : Out std_logic_vector (31 downto 0) );
+        end component;
+
+        component CONFIG_08H
+                Port ( REVISION_ID : In std_logic_vector (7 downto 0);
+                       CONF_DATA_08H : Out std_logic_vector (31 downto 0) );
+        end component;
+
+        component CONFIG_00H
+                Port ( VENDOR_ID : In std_logic_vector (15 downto 0);
+                       CONF_DATA_00H : Out std_logic_vector (31 downto 0) );
+        end component;
+
+        component CONFIG_04H
+                Port ( AD_REG : In std_logic_vector (31 downto 0);
+                       CBE_REGn : In std_logic_vector (3 downto 0);
+                       CONF_WR_04H : In std_logic;
+                       PCI_CLOCK : In std_logic;
+                       PCI_RSTn : In std_logic;
+                       PERR : In std_logic;
+                       SERR : In std_logic;
+                       CONF_DATA_04H : Out std_logic_vector (31 downto 0) );
+        end component;
+

 begin
 begin

-        CONF_DATA_00H <= CONF_DEVICE_ID & VENDOR_ID;
-        CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID;
-        CONF_DATA_04H <= CONF_STATUS & CONF_COMMAND;
-
-        CONF_MAX_LAT <= X"00";
-        CONF_MIN_GNT <= X"00";
-        -- CONF_INT_PIN <= X"00"; -- Interrupt -
-        CONF_INT_PIN <= X"01"; -- Interrupt A
-        -- CONF_INT_PIN <= X"02"; -- Interrupt B
-        -- CONF_INT_PIN <= X"03"; -- Interrupt C
-        -- CONF_INT_PIN <= X"04"; -- Interrupt D
-        -- CONF_INT_PIN <= X"05 - FF0"; -- Reserviert
-        CONF_DATA_3CH <= CONF_MAX_LAT & CONF_MIN_GNT & CONF_INT_PIN & CONF_INT_LINE;
-
-        CONF_BAS_ADDR_REG(1 downto 0) <= "01";-- Base Address Register for "I/O"
-        CONF_BAS_ADDR_REG(3 downto 2) <= "00";-- IO Bereich = 16 BYTE
-        CONF_DATA_10H <= CONF_BAS_ADDR_REG;

 
 

+        CONF_DATA_04H <= CONF_DATA_04H_DUMMY;
+        CONF_DATA_10H <= CONF_DATA_10H_DUMMY;
+
+        I10 : CONFIG_MUX_0
+        Port Map ( CONF_DATA_00H(31 downto 0)=>CONF_DATA_00H(31 downto 0),
+        CONF_DATA_04H(31 downto 0)=>CONF_DATA_04H_DUMMY(31 downto 0),
+        CONF_DATA_08H(31 downto 0)=>CONF_DATA_08H(31 downto 0),
+        CONF_DATA_10H(31 downto 0)=>CONF_DATA_10H_DUMMY(31 downto 0),
+        CONF_DATA_3CH(31 downto 0)=>CONF_DATA_3CH(31 downto 0),
+        READ_SEL(2 downto 0)=>CONF_READ_SEL(2 downto 0),
+        CONF_DATA(31 downto 0)=>CONF_DATA(31 downto 0) );

         I9 : CONFIG_RD_0
         Port Map ( ADDR_REG(31 downto 0)=>ADDR_REG(31 downto 0),
                    CF_RD_COM=>CF_RD_COM,
         I9 : CONFIG_RD_0
         Port Map ( ADDR_REG(31 downto 0)=>ADDR_REG(31 downto 0),
                    CF_RD_COM=>CF_RD_COM,


@@ -97,138 +127,29 @@ begin
                    CF_WR_COM=>CF_WR_COM, IRDY_REGn=>IRDY_REGn,
                    TRDYn=>TRDYn, CONF_WR_04H=>CONF_WR_04H,
                    CONF_WR_10H=>CONF_WR_10H, CONF_WR_3CH=>CONF_WR_3CH );
                    CF_WR_COM=>CF_WR_COM, IRDY_REGn=>IRDY_REGn,
                    TRDYn=>TRDYn, CONF_WR_04H=>CONF_WR_04H,
                    CONF_WR_10H=>CONF_WR_10H, CONF_WR_3CH=>CONF_WR_3CH );

+        I6 : CONFIG_3CH
+        Port Map ( AD_REG(31 downto 0)=>AD_REG(31 downto 0),
+        CBE_REGn(3 downto 0)=>CBE_REGn(3 downto 0),
+        CONF_WR_3CH=>CONF_WR_3CH, PCI_CLOCK=>PCI_CLOCK,
+        PCI_RSTn=>PCI_RSTn,
+        CONF_DATA_3CH(31 downto 0)=>CONF_DATA_3CH(31 downto 0) );
+        I5 : CONFIG_10H
+        Port Map ( AD_REG(31 downto 0)=>AD_REG(31 downto 0),
+        CBE_REGn(3 downto 0)=>CBE_REGn(3 downto 0),
+        CONF_WR_10H=>CONF_WR_10H, PCI_CLOCK=>PCI_CLOCK,
+        PCI_RSTn=>PCI_RSTn,
+        CONF_DATA_10H(31 downto 0)=>CONF_DATA_10H_DUMMY(31 downto 0) );
+        I4 : CONFIG_08H
+        Port Map ( REVISION_ID(7 downto 0)=>REVISION_ID(7 downto 0),
+        CONF_DATA_08H(31 downto 0)=>CONF_DATA_08H(31 downto 0) );
+        I3 : CONFIG_00H
+        Port Map ( VENDOR_ID(15 downto 0)=>VENDOR_ID(15 downto 0),
+        CONF_DATA_00H(31 downto 0)=>CONF_DATA_00H(31 downto 0) );
+        I2 : CONFIG_04H
+        Port Map ( AD_REG(31 downto 0)=>AD_REG(31 downto 0),
+        CBE_REGn(3 downto 0)=>CBE_REGn(3 downto 0),
+        CONF_WR_04H=>CONF_WR_04H, PCI_CLOCK=>PCI_CLOCK,
+        PCI_RSTn=>PCI_RSTn, PERR=>PERR, SERR=>SERR,
+        CONF_DATA_04H(31 downto 0)=>CONF_DATA_04H_DUMMY(31 downto 0) );

 
 

-        process (PCI_CLOCK,PCI_RSTn)
-        begin
-        if PCI_RSTn = '0' then
-                CONF_INT_LINE <= (others => '0');
-
-        elsif (rising_edge(PCI_CLOCK)) then
-                if CONF_WR_3CH = '1'and CBE_REGn(0) = '0' then
-                        CONF_INT_LINE(7 downto 0) <= AD_REG(7 downto 0);
-                end if;
-        end if;
-        end process;
-
-        process (PCI_CLOCK,PCI_RSTn)
-        begin
-
-        -- if PCI_RSTn = '0' then CONF_BAS_ADDR_REG(31 downto 2) <= (others =>'0');
-        if PCI_RSTn = '0' then
-                CONF_BAS_ADDR_REG(31 downto 4) <= (others =>'0');
-
-        elsif (rising_edge(PCI_CLOCK)) then
-
-                if CONF_WR_10H = '1'and CBE_REGn(3) = '0' then
-                        CONF_BAS_ADDR_REG(31 downto 24) <= AD_REG(31 downto 24);
-                else
-                        CONF_BAS_ADDR_REG(31 downto 24) <= CONF_BAS_ADDR_REG(31 downto 24);
-                end if;
-
-                if CONF_WR_10H = '1'and CBE_REGn(2) = '0' then
-                        CONF_BAS_ADDR_REG(23 downto 16) <= AD_REG(23 downto 16);
-                else
-                        CONF_BAS_ADDR_REG(23 downto 16) <= CONF_BAS_ADDR_REG(23 downto 16);
-                end if;
-
-                if CONF_WR_10H = '1'and CBE_REGn(1) = '0' then
-                        CONF_BAS_ADDR_REG(15 downto 8) <= AD_REG(15 downto 8);
-                else
-                        CONF_BAS_ADDR_REG(15 downto 8) <= CONF_BAS_ADDR_REG(15 downto 8);
-                end if;
-
-                -- if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
-                --         CONF_BAS_ADDR_REG( 7 downto 2) <= AD_REG( 7 downto 2);
-                -- else
-                --         CONF_BAS_ADDR_REG( 7 downto 2) <= CONF_BAS_ADDR_REG( 7 downto 2);
-                -- end if;
-
-                if CONF_WR_10H = '1'and CBE_REGn(0) = '0' then
-                        CONF_BAS_ADDR_REG( 7 downto 4) <= AD_REG( 7 downto 4);
-                else
-                        CONF_BAS_ADDR_REG( 7 downto 4) <= CONF_BAS_ADDR_REG( 7 downto 4);
-                end if;
-        end if;
-        end process;
-
-        --*******************************************************************
-        --************* PCI Configuration Space Header "STATUS" *************
-        --*******************************************************************
-
-        CONF_STATUS(20 downto 16) <= "00000";-- Reserved
-        CONF_STATUS(21 ) <= '0';-- MAS/TAR: "R_O" :'0'= 33MHz / '1'= 66MHz
-        CONF_STATUS(22 ) <= '0';-- MAS/TAR: "R_O"
-        CONF_STATUS(23 ) <= '0';-- ???/???: "R_O" : fast back-to-back
-        CONF_STATUS(24 ) <= '0';-- Master :
-        --CONF_STATUS(26 downto 25) <= "00";-- Mas/Tar: "R_O" : timing fast for "DEVSEL"
-        CONF_STATUS(26 downto 25) <= "01";-- Mas/Tar: "R_O" : timing medium for "DEVSEL"
-        --CONF_STATUS(26 downto 25) <= "10";-- Mas/Tar: "R_O" : timing slow for "DEVSEL"
-        --CONF_STATUS(26 downto 25) <= "11";-- Mas/Tar: "R_O" : reserved
-        CONF_STATUS(27 ) <= '0';-- Target : "R_W" : Taget-Abort
-        CONF_STATUS(28 ) <= '0';-- Master : "R_W" : Taget-Abort
-        CONF_STATUS(29 ) <= '0';-- Master : "R_W" : Master-Abort
-        --CONF_STATUS(30 ) <= SERR;-- Mas/Tar: "R_W" : SERR
-        --CONF_STATUS(31 ) <= PERR;-- Mas/Tar: "R_W" : PERR
-
-        process (PCI_CLOCK,PCI_RSTn)
-        begin
-        if PCI_RSTn = '0' then
-                CONF_STATUS(30) <= '0';
-                CONF_STATUS(31) <= '0';
-
-        elsif (rising_edge(PCI_CLOCK)) then
-                if CONF_WR_04H = '1' and CBE_REGn(3) = '0' then
-                        CONF_STATUS(30) <= not (AD_REG(30) and CONF_STATUS(30));
-                        CONF_STATUS(31) <= not (AD_REG(31) and CONF_STATUS(31));
-
-                else
-                        CONF_STATUS(30) <= SERR or CONF_STATUS(30);
-                        CONF_STATUS(31) <= PERR or CONF_STATUS(31);
-
-                end if;
-        end if;
-        end process;
-
-        --*******************************************************************
-        --*********** PCI Configuration Space Header "COMMAND" **************
-        --*******************************************************************
-
-        -- CONF_COMMAND( 0) <= '0';-- I/O Space accesses ???
-        -- CONF_COMMAND( 1) <= '0';-- Mem Space accesses ???
-        -- CONF_COMMAND( 2) <= '0';-- abillity to act as a master on the PCI bus
-        -- CONF_COMMAND( 3) <= '0';-- Special Cycle ???
-        -- CONF_COMMAND( 4) <= '0';-- Master ???
-        -- CONF_COMMAND( 5) <= '0';-- VGA ???
-        -- CONF_COMMAND( 6) <= '0';-- Party checking enable/disable
-        CONF_COMMAND( 7) <= '0';-- address/data stepping ???
-        -- CONF_COMMAND( 8) <= '0';-- enable/disable "PCI_SERRn"
-        -- CONF_COMMAND( 9) <= '0';-- fast back-to-back
-        -- CONF_COMMAND(10) <= '0';-- Reserved
-        -- CONF_COMMAND(11) <= '0';-- Reserved
-        -- CONF_COMMAND(12) <= '0';-- Reserved
-        -- CONF_COMMAND(13) <= '0';-- Reserved
-        -- CONF_COMMAND(14) <= '0';-- Reserved
-        -- CONF_COMMAND(15) <= '0';-- Reserved
-
-        process (PCI_CLOCK,PCI_RSTn)
-        begin
-                if PCI_RSTn = '0' then
-                        CONF_COMMAND(15 downto 8) <= (others =>'0');
-                        CONF_COMMAND( 6 downto 0) <= (others =>'0');
-
-                elsif (rising_edge(PCI_CLOCK)) then
-
-                        if CONF_WR_04H = '1'and CBE_REGn(1) = '0' then
-                                CONF_COMMAND(15 downto 8) <= AD_REG(15 downto 8);
-                        else
-                                CONF_COMMAND(15 downto 8) <= CONF_COMMAND(15 downto 8);
-                        end if;
-
-                        if CONF_WR_04H = '1'and CBE_REGn(0) = '0' then
-                                CONF_COMMAND( 6 downto 0) <= AD_REG( 6 downto 0);
-                        else
-                                CONF_COMMAND( 6 downto 0) <= CONF_COMMAND( 6 downto 0);
-                        end if;
-                end if;
-        end process;

 end SCHEMATIC;
 end SCHEMATIC;