------------------------------------------------------------------------------\r
--- --\r
--- Copyright (c) 1997 by Synplicity, Inc. All rights reserved. --\r
--- --\r
--- This source file may be used and distributed without restriction --\r
--- provided that this copyright statement is not removed from the file --\r
--- and that any derivative work contains this copyright notice. --\r
--- --\r
--- Primitive library for post synthesis simulation --\r
--- These models are not intended for efficient synthesis --\r
--- --\r
------------------------------------------------------------------------------\r
-library ieee;\r
-use ieee.std_logic_1164.all;\r
-entity prim_counter is\r
- generic (w : integer := 8);\r
- port (\r
- q : buffer std_logic_vector(w - 1 downto 0);\r
- cout : out std_logic;\r
- d : in std_logic_vector(w - 1 downto 0);\r
- cin : in std_logic;\r
- clk : in std_logic;\r
- rst : in std_logic;\r
- load : in std_logic;\r
- en : in std_logic;\r
- updn : in std_logic\r
- );\r
-end prim_counter;\r
-\r
-architecture beh of prim_counter is\r
- signal nextq : std_logic_vector(w - 1 downto 0);\r
-begin\r
- nxt: process (q, cin, updn)\r
- variable i : integer;\r
- variable nextc, c : std_logic;\r
- begin\r
- nextc := cin;\r
- for i in 0 to w - 1 loop\r
- c := nextc;\r
- nextq(i) <= c xor (not updn) xor q(i);\r
- nextc := (c and (not updn)) or \r
- (c and q(i)) or\r
- ((not updn) and q(i));\r
- end loop;\r
- cout <= nextc;\r
- end process;\r
-\r
- ff : process (clk, rst)\r
- begin\r
- if rst = '1' then\r
- q <= (others => '0');\r
- elsif rising_edge(clk) then\r
- q <= nextq;\r
- end if;\r
- end process ff;\r
-end beh;\r
-\r
-library ieee;\r
-use ieee.std_logic_1164.all;\r
-entity prim_dff is\r
- port (q : out std_logic;\r
- d : in std_logic;\r
- clk : in std_logic;\r
- r : in std_logic := '0';\r
- s : in std_logic := '0');\r
-end prim_dff;\r
-\r
-architecture beh of prim_dff is\r
-begin\r
- ff : process (clk, r, s)\r
- begin\r
- if r = '1' then\r
- q <= '0';\r
- elsif s = '1' then\r
- q <= '1';\r
- elsif rising_edge(clk) then\r
- q <= d;\r
- end if;\r
- end process ff;\r
-end beh;\r
-\r
-library ieee;\r
-use ieee.std_logic_1164.all;\r
-entity prim_latch is\r
- port (q : out std_logic;\r
- d : in std_logic;\r
- clk : in std_logic;\r
- r : in std_logic := '0';\r
- s : in std_logic := '0');\r
-end prim_latch;\r
-\r
-architecture beh of prim_latch is\r
-begin\r
- q <= '0' when r = '1' else\r
- '1' when s = '1' else\r
- d when clk = '1';\r
-end beh;\r
-\r
-\r
-library ieee;\r
-use ieee.std_logic_1164.all;\r
-use ieee.std_logic_unsigned.all;\r
-\r
-entity prim_ramd is\r
-generic (\r
- data_width : integer := 4;\r
- addr_width : integer := 5);\r
-port (\r
- dout : out std_logic_vector(data_width-1 downto 0);\r
- aout : in std_logic_vector(addr_width-1 downto 0);\r
- din : in std_logic_vector(data_width-1 downto 0);\r
- ain : in std_logic_vector(addr_width-1 downto 0);\r
- we : in std_logic;\r
- clk : in std_logic);\r
-end prim_ramd;\r
-\r
-architecture beh of prim_ramd is\r
-\r
-constant depth : integer := 2** addr_width;\r
-type mem_type is array (depth-1 downto 0) of std_logic_vector (data_width-1 downto 0);\r
-signal mem: mem_type;\r
-\r
-begin \r
-\r
-dout <= mem(conv_integer(aout));\r
-\r
-process (clk)\r
- begin\r
- if rising_edge(clk) then \r
- if (we = '1') then\r
- mem(conv_integer(ain)) <= din;\r
- end if;\r
- end if;\r
-end process;\r
-\r
-end beh ;\r
-\r
-\r
-library ieee;\r
-use ieee.std_logic_1164.all;\r
-package components is\r
- component prim_counter\r
- generic (w : integer);\r
- port (\r
- q : buffer std_logic_vector(w - 1 downto 0);\r
- cout : out std_logic;\r
- d : in std_logic_vector(w - 1 downto 0);\r
- cin : in std_logic;\r
- clk : in std_logic;\r
- rst : in std_logic;\r
- load : in std_logic;\r
- en : in std_logic;\r
- updn : in std_logic\r
- );\r
- end component;\r
- component prim_dff\r
- port (q : out std_logic;\r
- d : in std_logic;\r
- clk : in std_logic;\r
- r : in std_logic := '0';\r
- s : in std_logic := '0');\r
- end component;\r
- component prim_latch\r
- port (q : out std_logic;\r
- d : in std_logic;\r
- clk : in std_logic;\r
- r : in std_logic := '0';\r
- s : in std_logic := '0');\r
- end component;\r
-\r
- component prim_ramd is\r
- generic (\r
- data_width : integer := 4;\r
- addr_width : integer := 5);\r
- port (\r
- dout : out std_logic_vector(data_width-1 downto 0);\r
- aout : in std_logic_vector(addr_width-1 downto 0);\r
- din : in std_logic_vector(data_width-1 downto 0);\r
- ain : in std_logic_vector(addr_width-1 downto 0);\r
- we : in std_logic;\r
- clk : in std_logic);\r
- end component;\r
-\r
-end components;\r
+-----------------------------------------------------------------------------
+-- --
+-- Copyright (c) 1997 by Synplicity, Inc. All rights reserved. --
+-- --
+-- This source file may be used and distributed without restriction --
+-- provided that this copyright statement is not removed from the file --
+-- and that any derivative work contains this copyright notice. --
+-- --
+-- Primitive library for post synthesis simulation --
+-- These models are not intended for efficient synthesis --
+-- --
+-----------------------------------------------------------------------------
+library ieee;
+use ieee.std_logic_1164.all;
+entity prim_counter is
+ generic (w : integer := 8);
+ port (
+ q : buffer std_logic_vector(w - 1 downto 0);
+ cout : out std_logic;
+ d : in std_logic_vector(w - 1 downto 0);
+ cin : in std_logic;
+ clk : in std_logic;
+ rst : in std_logic;
+ load : in std_logic;
+ en : in std_logic;
+ updn : in std_logic
+ );
+end prim_counter;
+
+architecture beh of prim_counter is
+ signal nextq : std_logic_vector(w - 1 downto 0);
+begin
+ nxt: process (q, cin, updn)
+ variable i : integer;
+ variable nextc, c : std_logic;
+ begin
+ nextc := cin;
+ for i in 0 to w - 1 loop
+ c := nextc;
+ nextq(i) <= c xor (not updn) xor q(i);
+ nextc := (c and (not updn)) or
+ (c and q(i)) or
+ ((not updn) and q(i));
+ end loop;
+ cout <= nextc;
+ end process;
+
+ ff : process (clk, rst)
+ begin
+ if rst = '1' then
+ q <= (others => '0');
+ elsif rising_edge(clk) then
+ q <= nextq;
+ end if;
+ end process ff;
+end beh;
+
+library ieee;
+use ieee.std_logic_1164.all;
+entity prim_dff is
+ port (q : out std_logic;
+ d : in std_logic;
+ clk : in std_logic;
+ r : in std_logic := '0';
+ s : in std_logic := '0');
+end prim_dff;
+
+architecture beh of prim_dff is
+begin
+ ff : process (clk, r, s)
+ begin
+ if r = '1' then
+ q <= '0';
+ elsif s = '1' then
+ q <= '1';
+ elsif rising_edge(clk) then
+ q <= d;
+ end if;
+ end process ff;
+end beh;
+
+library ieee;
+use ieee.std_logic_1164.all;
+entity prim_latch is
+ port (q : out std_logic;
+ d : in std_logic;
+ clk : in std_logic;
+ r : in std_logic := '0';
+ s : in std_logic := '0');
+end prim_latch;
+
+architecture beh of prim_latch is
+begin
+ q <= '0' when r = '1' else
+ '1' when s = '1' else
+ d when clk = '1';
+end beh;
+
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+
+entity prim_ramd is
+generic (
+ data_width : integer := 4;
+ addr_width : integer := 5);
+port (
+ dout : out std_logic_vector(data_width-1 downto 0);
+ aout : in std_logic_vector(addr_width-1 downto 0);
+ din : in std_logic_vector(data_width-1 downto 0);
+ ain : in std_logic_vector(addr_width-1 downto 0);
+ we : in std_logic;
+ clk : in std_logic);
+end prim_ramd;
+
+architecture beh of prim_ramd is
+
+constant depth : integer := 2** addr_width;
+type mem_type is array (depth-1 downto 0) of std_logic_vector (data_width-1 downto 0);
+signal mem: mem_type;
+
+begin
+
+dout <= mem(conv_integer(aout));
+
+process (clk)
+ begin
+ if rising_edge(clk) then
+ if (we = '1') then
+ mem(conv_integer(ain)) <= din;
+ end if;
+ end if;
+end process;
+
+end beh ;
+
+
+library ieee;
+use ieee.std_logic_1164.all;
+package components is
+ component prim_counter
+ generic (w : integer);
+ port (
+ q : buffer std_logic_vector(w - 1 downto 0);
+ cout : out std_logic;
+ d : in std_logic_vector(w - 1 downto 0);
+ cin : in std_logic;
+ clk : in std_logic;
+ rst : in std_logic;
+ load : in std_logic;
+ en : in std_logic;
+ updn : in std_logic
+ );
+ end component;
+ component prim_dff
+ port (q : out std_logic;
+ d : in std_logic;
+ clk : in std_logic;
+ r : in std_logic := '0';
+ s : in std_logic := '0');
+ end component;
+ component prim_latch
+ port (q : out std_logic;
+ d : in std_logic;
+ clk : in std_logic;
+ r : in std_logic := '0';
+ s : in std_logic := '0');
+ end component;
+
+ component prim_ramd is
+ generic (
+ data_width : integer := 4;
+ addr_width : integer := 5);
+ port (
+ dout : out std_logic_vector(data_width-1 downto 0);
+ aout : in std_logic_vector(addr_width-1 downto 0);
+ din : in std_logic_vector(data_width-1 downto 0);
+ ain : in std_logic_vector(addr_width-1 downto 0);
+ we : in std_logic;
+ clk : in std_logic);
+ end component;
+
+end components;
projects / raggedstone / blobdiff