--- /dev/null
+# ##############################################################################
+# Created by Base System Builder Wizard for Xilinx EDK 8.2.02 Build EDK_Im_Sp2.4
+# Thu Mar 22 21:42:23 2007
+# Target Board: Custom
+# Family: spartan3
+# Device: xc3s1500
+# Package: fg456
+# Speed Grade: -4
+# Processor: Microblaze
+# System clock frequency: 50.000000 MHz
+# Debug interface: On-Chip HW Debug Module
+# On Chip Memory : 64 KB
+# ##############################################################################
+
+
+ PARAMETER VERSION = 2.1.0
+
+
+ PORT fpga_0_RS232_req_to_send_pin = net_gnd, DIR = O
+ PORT fpga_0_RS232_RX_pin = fpga_0_RS232_RX, DIR = I
+ PORT fpga_0_RS232_TX_pin = fpga_0_RS232_TX, DIR = O
+ PORT sys_clk_pin = dcm_clk_s, DIR = I, SIGIS = CLK, CLK_FREQ = 50000000
+ PORT sys_rst_pin = sys_rst_s, DIR = I, RST_POLARITY = 0, SIGIS = RST
+ PORT RS232foff = net_vcc, DIR = O
+ PORT LED_out = GPIO_LED_out, VEC = [0:3], DIR = O
+ PORT MEM_FLASH_DQ = FLASH_DQ, DIR = IO, VEC = [7:0]
+ PORT MEM_FLASH_ADDR = FLASH_ADDR, DIR = O, VEC = [18:0]
+ PORT MEM_FLASH_CE = FLASH_CEN, DIR = O, VEC = [0:0]
+ PORT MEM_FLASH_OE = FLASH_OEN, DIR = O, VEC = [0:0]
+ PORT MEM_FLASH_WE = FLASH_WEN, DIR = O
+ PORT SEVENSEG_out = GPIO_7SEG_OUT, DIR = O, VEC = [0:12]
+ PORT DBG_FLASH_ADDR = FLASH_ADDR_split, DIR = O, VEC = [0:31]
+
+
+BEGIN microblaze
+ PARAMETER INSTANCE = microblaze_0
+ PARAMETER HW_VER = 4.00.b
+ PARAMETER C_USE_FPU = 0
+ PARAMETER C_DEBUG_ENABLED = 1
+ PARAMETER C_NUMBER_OF_PC_BRK = 2
+ PARAMETER C_FSL_DATA_SIZE = 32
+ PARAMETER C_NUMBER_OF_RD_ADDR_BRK = 0
+ PARAMETER C_NUMBER_OF_WR_ADDR_BRK = 0
+ BUS_INTERFACE DLMB = dlmb
+ BUS_INTERFACE ILMB = ilmb
+ BUS_INTERFACE DOPB = mb_opb
+ BUS_INTERFACE IOPB = mb_opb
+ PORT DBG_CAPTURE = DBG_CAPTURE_s
+ PORT DBG_CLK = DBG_CLK_s
+ PORT DBG_REG_EN = DBG_REG_EN_s
+ PORT DBG_TDI = DBG_TDI_s
+ PORT DBG_TDO = DBG_TDO_s
+ PORT DBG_UPDATE = DBG_UPDATE_s
+END
+
+BEGIN opb_v20
+ PARAMETER INSTANCE = mb_opb
+ PARAMETER HW_VER = 1.10.c
+ PARAMETER C_EXT_RESET_HIGH = 0
+ PORT SYS_Rst = sys_rst_s
+ PORT OPB_Clk = sys_clk_s
+END
+
+BEGIN opb_mdm
+ PARAMETER INSTANCE = debug_module
+ PARAMETER HW_VER = 2.00.a
+ PARAMETER C_MB_DBG_PORTS = 1
+ PARAMETER C_USE_UART = 0
+ PARAMETER C_BASEADDR = 0x41400000
+ PARAMETER C_HIGHADDR = 0x4140ffff
+ BUS_INTERFACE SOPB = mb_opb
+ PORT DBG_CAPTURE_0 = DBG_CAPTURE_s
+ PORT DBG_CLK_0 = DBG_CLK_s
+ PORT DBG_REG_EN_0 = DBG_REG_EN_s
+ PORT DBG_TDI_0 = DBG_TDI_s
+ PORT DBG_TDO_0 = DBG_TDO_s
+ PORT DBG_UPDATE_0 = DBG_UPDATE_s
+END
+
+BEGIN lmb_v10
+ PARAMETER INSTANCE = ilmb
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_EXT_RESET_HIGH = 0
+ PORT SYS_Rst = sys_rst_s
+ PORT LMB_Clk = sys_clk_s
+END
+
+BEGIN lmb_v10
+ PARAMETER INSTANCE = dlmb
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_EXT_RESET_HIGH = 0
+ PORT SYS_Rst = sys_rst_s
+ PORT LMB_Clk = sys_clk_s
+END
+
+BEGIN lmb_bram_if_cntlr
+ PARAMETER INSTANCE = dlmb_cntlr
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0x00000000
+ PARAMETER C_HIGHADDR = 0x00007FFF
+ BUS_INTERFACE SLMB = dlmb
+ BUS_INTERFACE BRAM_PORT = dlmb_port
+END
+
+BEGIN lmb_bram_if_cntlr
+ PARAMETER INSTANCE = ilmb_cntlr
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0x00000000
+ PARAMETER C_HIGHADDR = 0x00007FFF
+ BUS_INTERFACE SLMB = ilmb
+ BUS_INTERFACE BRAM_PORT = ilmb_port
+END
+
+BEGIN bram_block
+ PARAMETER INSTANCE = lmb_bram
+ PARAMETER HW_VER = 1.00.a
+ BUS_INTERFACE PORTA = ilmb_port
+ BUS_INTERFACE PORTB = dlmb_port
+END
+
+BEGIN opb_uartlite
+ PARAMETER INSTANCE = RS232
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 1
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0x40600000
+ PARAMETER C_HIGHADDR = 0x4060ffff
+ BUS_INTERFACE SOPB = mb_opb
+ PORT RX = fpga_0_RS232_RX
+ PORT TX = fpga_0_RS232_TX
+END
+
+BEGIN dcm_module
+ PARAMETER INSTANCE = dcm_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_CLK0_BUF = TRUE
+ PARAMETER C_CLKIN_PERIOD = 20.000000
+ PARAMETER C_CLK_FEEDBACK = 1X
+ PARAMETER C_DLL_FREQUENCY_MODE = LOW
+ PARAMETER C_EXT_RESET_HIGH = 1
+ PORT CLKIN = dcm_clk_s
+ PORT CLK0 = sys_clk_s
+ PORT CLKFB = sys_clk_s
+ PORT RST = net_gnd
+ PORT LOCKED = dcm_0_lock
+END
+
+BEGIN opb_gpio
+ PARAMETER INSTANCE = LEDS
+ PARAMETER HW_VER = 3.01.b
+ PARAMETER C_GPIO_WIDTH = 4
+ PARAMETER C_IS_BIDIR = 0
+ PARAMETER C_BASEADDR = 0x40020000
+ PARAMETER C_HIGHADDR = 0x4002ffff
+ BUS_INTERFACE SOPB = mb_opb
+ PORT GPIO_d_out = GPIO_LED_out
+END
+
+BEGIN opb_emc
+ PARAMETER INSTANCE = FLASH
+ PARAMETER HW_VER = 2.00.a
+ PARAMETER C_NUM_BANKS_MEM = 1
+ PARAMETER C_MAX_MEM_WIDTH = 8
+ PARAMETER C_MEM0_WIDTH = 8
+ PARAMETER C_TCEDV_PS_MEM_0 = 70000
+ PARAMETER C_TAVDV_PS_MEM_0 = 70000
+ PARAMETER C_THZCE_PS_MEM_0 = 25000
+ PARAMETER C_TWC_PS_MEM_0 = 110000
+ PARAMETER C_TWP_PS_MEM_0 = 70000
+ PARAMETER C_TLZWE_PS_MEM_0 = 15000
+ PARAMETER C_OPB_CLK_PERIOD_PS = 20000
+ PARAMETER C_THZOE_PS_MEM_0 = 25000
+ PARAMETER C_INCLUDE_DATAWIDTH_MATCHING_0 = 1
+ PARAMETER C_MEM0_BASEADDR = 0x20000000
+ PARAMETER C_MEM0_HIGHADDR = 0x2007FFFF
+ PARAMETER C_INCLUDE_NEGEDGE_IOREGS = 0
+ BUS_INTERFACE SOPB = mb_opb
+ PORT Mem_A = FLASH_ADDR_split
+ PORT Mem_CEN = FLASH_CEN
+ PORT Mem_OEN = FLASH_OEN
+ PORT Mem_WEN = FLASH_WEN
+ PORT Mem_DQ = FLASH_DQ
+END
+
+BEGIN opb_gpio
+ PARAMETER INSTANCE = SEVENSEG
+ PARAMETER HW_VER = 3.01.b
+ PARAMETER C_GPIO_WIDTH = 13
+ PARAMETER C_BASEADDR = 0x40000000
+ PARAMETER C_HIGHADDR = 0x4000ffff
+ BUS_INTERFACE SOPB = mb_opb
+ PORT GPIO_d_out = GPIO_7SEG_OUT
+END
+
+BEGIN chipscope_icon
+ PARAMETER INSTANCE = chipscope_icon_0
+ PARAMETER HW_VER = 1.01.a
+ PORT control0 = ila_control0
+END
+
+BEGIN chipscope_ila
+ PARAMETER INSTANCE = chipscope_ila_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_NUM_DATA_SAMPLES = 1024
+ PARAMETER C_TRIG0_TRIGGER_IN_WIDTH = 19
+ PARAMETER C_TRIG1_UNITS = 1
+ PARAMETER C_TRIG2_UNITS = 1
+ PORT CHIPSCOPE_ILA_CONTROL = ila_control0
+ PORT CLK = sys_clk_s
+ PORT TRIG0 = FLASH_ADDR
+END
+
+BEGIN util_bus_split
+ PARAMETER INSTANCE = flash_split
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_SIZE_IN = 32
+ PARAMETER C_SPLIT = 13
+ PORT Sig = FLASH_ADDR_split
+ PORT Out2 = FLASH_ADDR
+END
+
projects / raggedstone / blobdiff