X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/raggedstone/blobdiff_plain/d452afd57d3469271a8532a9271ed7c14a53a427..696ded12bcd3df47aeefae2c685029a799d84abd:/dhwk/source/SER_PAR_CON.vhd

diff --git a/dhwk/source/SER_PAR_CON.vhd b/dhwk/source/SER_PAR_CON.vhd
index a030eaa..a6a2606 100644
--- a/dhwk/source/SER_PAR_CON.vhd
+++ b/dhwk/source/SER_PAR_CON.vhd
@@ -1,154 +1,154 @@
--- $Id: SER_PAR_CON.vhd,v 1.1 2007-03-10 11:24:03 sithglan Exp $
-
-library ieee;
-use ieee.std_logic_1164.all;
-use ieee.std_logic_unsigned.all;
-
-entity SER_PAR_CON is
-	port
-	(
-	PCI_CLOCK			:in	std_logic; 
-	RESET				:in	std_logic; 
-	SPC_ENABLE			:in	std_logic; -- Driver Enable Sender/Receiver
-	SYNC_R_FIFO_FFn                	:in	std_logic; -- FIFO Full Flag (low active)
- 	SERIAL_IN			:in	std_logic; -- Serial Input
-	R_FIFO_WRITEn		        :out	std_logic; -- FIFO Write (low active)
-	SPC_RDY_OUT			:out	std_logic; -- Ready to Receive Data
-	PAR_OUT				:out	std_logic_vector(7 downto 0)
-	);
-end entity SER_PAR_CON ;
-
-
-architecture SER_PAR_CON_DESIGN of SER_PAR_CON is
-
--- constant STATE_RECV            :std_logic_vector(3 downto 0) := "0001";
-constant STATE_RECV_START_BIT  :std_logic_vector(3 downto 0) := "0010";
-constant STATE_RECV_BIT_0      :std_logic_vector(3 downto 0) := "0011";
-constant STATE_RECV_BIT_1      :std_logic_vector(3 downto 0) := "0100";
-constant STATE_RECV_BIT_2      :std_logic_vector(3 downto 0) := "0101";
-constant STATE_RECV_BIT_3      :std_logic_vector(3 downto 0) := "0110";
-constant STATE_RECV_BIT_4      :std_logic_vector(3 downto 0) := "0111";
-constant STATE_RECV_BIT_5      :std_logic_vector(3 downto 0) := "1000";
-constant STATE_RECV_BIT_6      :std_logic_vector(3 downto 0) := "1001";
-constant STATE_RECV_BIT_7      :std_logic_vector(3 downto 0) := "1010";
-constant STATE_RECV_FIFOFULL   :std_logic_vector(3 downto 0) := "1011";
-
-signal COUNT     :std_logic_vector (3 downto 0);
-signal STATE     :std_logic_vector (3 downto 0);
-signal STARTBIT  :std_logic_vector (3 downto 0);
-
-
-attribute syn_state_machine:boolean;
-attribute syn_state_machine of STATE: signal is false;
-attribute syn_state_machine of COUNT: signal is false;
-
-begin
-
-process(PCI_CLOCK)
-begin
-        if (PCI_CLOCK'event and PCI_CLOCK = '1') then
-				    		if ("0000" < COUNT) then
-                				COUNT <= COUNT - 1;
-        				end if;
-
--- war nicht das Problem des Datenverlusts
---        if (R_FIFO_WRITEn = '0' and COUNT = "0000") then
---            R_FIFO_WRITEn <= '1';
----      end if;
-
-                if (RESET = '1') then
-                        STATE <= STATE_RECV_START_BIT;
-                        COUNT <= "0000";
-                        R_FIFO_WRITEn <= '1';
-
-                elsif (SPC_ENABLE = '1') then
-                       
-											 if (STATE = STATE_RECV_START_BIT) then
-                              R_FIFO_WRITEn <= '1';
-											        if (STARTBIT = "0011") then
-																COUNT <= "0011";
-                          	    STATE <= STATE_RECV_BIT_0;
-                              end if;
-
-                       elsif (STATE = STATE_RECV_FIFOFULL) then
-                              if (SYNC_R_FIFO_FFn = '1') then
-                                      R_FIFO_WRITEn <= '0';
-                                      STATE <= STATE_RECV_START_BIT;
-                              end if;
-
-                       elsif (COUNT = "0000") then
-                        COUNT <= "0011";
-                        case STATE is
-																
-                                when STATE_RECV_BIT_0 =>
-                                        PAR_OUT(0) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_1;
-
-                                when STATE_RECV_BIT_1 =>
-                                        PAR_OUT(1) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_2;
-                                        
-                                when STATE_RECV_BIT_2 =>
-                                        PAR_OUT(2) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_3;
-                                        
-                                when STATE_RECV_BIT_3 =>
-                                        PAR_OUT(3) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_4;
-                                        
-                                when STATE_RECV_BIT_4 =>
-                                        PAR_OUT(4) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_5;
-                                        
-                                when STATE_RECV_BIT_5 =>
-                                        PAR_OUT(5) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_6;
-                                        
-                                when STATE_RECV_BIT_6 =>
-                                        PAR_OUT(6) <= STARTBIT(0);
-                                        STATE <= STATE_RECV_BIT_7;
-                                        
-                                when STATE_RECV_BIT_7 =>
-                                        PAR_OUT(7) <= STARTBIT(0);
-
-                                        if (SYNC_R_FIFO_FFn = '1') then
-                                             STATE <= STATE_RECV_START_BIT;
-                                             R_FIFO_WRITEn <= '0';
-                                        else 
-                                             STATE <= STATE_RECV_FIFOFULL;
-                                        end if;
-
-																when others =>
-																				STATE <= STATE_RECV_START_BIT;
-
-                        end case;
-                     end if; -- COUNT
-                end if; -- RESET ... / SPC_ENABLE ...
-        end if; -- PCI_CLOCK ...
-end process;
-
-process(PCI_CLOCK)
-begin
-		if (PCI_CLOCK'event and PCI_CLOCK = '1') then
-      SPC_RDY_OUT <= SPC_ENABLE AND SYNC_R_FIFO_FFn;
-		end if;
-end process;
-
-
-process(PCI_CLOCK)
-begin
-        if (PCI_CLOCK'event and PCI_CLOCK = '1') then
-					if (RESET = '1') then
- 						STARTBIT <= "0000";
-					else
-					STARTBIT(0) <= SERIAL_IN;
-					STARTBIT(1) <= STARTBIT(0);
-					STARTBIT(2) <= STARTBIT(1);
-					STARTBIT(3) <= STARTBIT(2);
-					end if;				  
-  			end if;
-end process;
-
-
-
-end architecture SER_PAR_CON_DESIGN;
+-- $Id: SER_PAR_CON.vhd,v 1.2 2007-03-11 08:04:56 sithglan Exp $
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+
+entity SER_PAR_CON is
+	port
+	(
+	PCI_CLOCK			:in	std_logic; 
+	RESET				:in	std_logic; 
+	SPC_ENABLE			:in	std_logic; -- Driver Enable Sender/Receiver
+	SYNC_R_FIFO_FFn                	:in	std_logic; -- FIFO Full Flag (low active)
+ 	SERIAL_IN			:in	std_logic; -- Serial Input
+	R_FIFO_WRITEn		        :out	std_logic; -- FIFO Write (low active)
+	SPC_RDY_OUT			:out	std_logic; -- Ready to Receive Data
+	PAR_OUT				:out	std_logic_vector(7 downto 0)
+	);
+end entity SER_PAR_CON ;
+
+
+architecture SER_PAR_CON_DESIGN of SER_PAR_CON is
+
+-- constant STATE_RECV            :std_logic_vector(3 downto 0) := "0001";
+constant STATE_RECV_START_BIT  :std_logic_vector(3 downto 0) := "0010";
+constant STATE_RECV_BIT_0      :std_logic_vector(3 downto 0) := "0011";
+constant STATE_RECV_BIT_1      :std_logic_vector(3 downto 0) := "0100";
+constant STATE_RECV_BIT_2      :std_logic_vector(3 downto 0) := "0101";
+constant STATE_RECV_BIT_3      :std_logic_vector(3 downto 0) := "0110";
+constant STATE_RECV_BIT_4      :std_logic_vector(3 downto 0) := "0111";
+constant STATE_RECV_BIT_5      :std_logic_vector(3 downto 0) := "1000";
+constant STATE_RECV_BIT_6      :std_logic_vector(3 downto 0) := "1001";
+constant STATE_RECV_BIT_7      :std_logic_vector(3 downto 0) := "1010";
+constant STATE_RECV_FIFOFULL   :std_logic_vector(3 downto 0) := "1011";
+
+signal COUNT     :std_logic_vector (3 downto 0);
+signal STATE     :std_logic_vector (3 downto 0);
+signal STARTBIT  :std_logic_vector (3 downto 0);
+
+
+attribute syn_state_machine:boolean;
+attribute syn_state_machine of STATE: signal is false;
+attribute syn_state_machine of COUNT: signal is false;
+
+begin
+
+process(PCI_CLOCK)
+begin
+        if (PCI_CLOCK'event and PCI_CLOCK = '1') then
+				    		if ("0000" < COUNT) then
+                				COUNT <= COUNT - 1;
+        				end if;
+
+-- war nicht das Problem des Datenverlusts
+--        if (R_FIFO_WRITEn = '0' and COUNT = "0000") then
+--            R_FIFO_WRITEn <= '1';
+---      end if;
+
+                if (RESET = '1') then
+                        STATE <= STATE_RECV_START_BIT;
+                        COUNT <= "0000";
+                        R_FIFO_WRITEn <= '1';
+
+                elsif (SPC_ENABLE = '1') then
+                       
+											 if (STATE = STATE_RECV_START_BIT) then
+                              R_FIFO_WRITEn <= '1';
+											        if (STARTBIT = "0011") then
+																COUNT <= "0011";
+                          	    STATE <= STATE_RECV_BIT_0;
+                              end if;
+
+                       elsif (STATE = STATE_RECV_FIFOFULL) then
+                              if (SYNC_R_FIFO_FFn = '1') then
+                                      R_FIFO_WRITEn <= '0';
+                                      STATE <= STATE_RECV_START_BIT;
+                              end if;
+
+                       elsif (COUNT = "0000") then
+                        COUNT <= "0011";
+                        case STATE is
+																
+                                when STATE_RECV_BIT_0 =>
+                                        PAR_OUT(0) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_1;
+
+                                when STATE_RECV_BIT_1 =>
+                                        PAR_OUT(1) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_2;
+                                        
+                                when STATE_RECV_BIT_2 =>
+                                        PAR_OUT(2) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_3;
+                                        
+                                when STATE_RECV_BIT_3 =>
+                                        PAR_OUT(3) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_4;
+                                        
+                                when STATE_RECV_BIT_4 =>
+                                        PAR_OUT(4) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_5;
+                                        
+                                when STATE_RECV_BIT_5 =>
+                                        PAR_OUT(5) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_6;
+                                        
+                                when STATE_RECV_BIT_6 =>
+                                        PAR_OUT(6) <= STARTBIT(0);
+                                        STATE <= STATE_RECV_BIT_7;
+                                        
+                                when STATE_RECV_BIT_7 =>
+                                        PAR_OUT(7) <= STARTBIT(0);
+
+                                        if (SYNC_R_FIFO_FFn = '1') then
+                                             STATE <= STATE_RECV_START_BIT;
+                                             R_FIFO_WRITEn <= '0';
+                                        else 
+                                             STATE <= STATE_RECV_FIFOFULL;
+                                        end if;
+
+																when others =>
+																				STATE <= STATE_RECV_START_BIT;
+
+                        end case;
+                     end if; -- COUNT
+                end if; -- RESET ... / SPC_ENABLE ...
+        end if; -- PCI_CLOCK ...
+end process;
+
+process(PCI_CLOCK)
+begin
+		if (PCI_CLOCK'event and PCI_CLOCK = '1') then
+      SPC_RDY_OUT <= SPC_ENABLE AND SYNC_R_FIFO_FFn;
+		end if;
+end process;
+
+
+process(PCI_CLOCK)
+begin
+        if (PCI_CLOCK'event and PCI_CLOCK = '1') then
+					if (RESET = '1') then
+ 						STARTBIT <= "0000";
+					else
+					STARTBIT(0) <= SERIAL_IN;
+					STARTBIT(1) <= STARTBIT(0);
+					STARTBIT(2) <= STARTBIT(1);
+					STARTBIT(3) <= STARTBIT(2);
+					end if;				  
+  			end if;
+end process;
+
+
+
+end architecture SER_PAR_CON_DESIGN;