From 7f64ffff4404505290147b02b80d22dcd0e2de65 Mon Sep 17 00:00:00 2001 From: sithglan Date: Sun, 11 Mar 2007 11:25:01 +0000 Subject: [PATCH 1/1] more merging --- dhwk/dhwk.prj | 1 - dhwk/source/pci/config_space_header.vhd | 127 ++++++++++++++++++--- dhwk/source/pci/config_wr_0.vhd | 140 ------------------------ 3 files changed, 112 insertions(+), 156 deletions(-) delete mode 100644 dhwk/source/pci/config_wr_0.vhd diff --git a/dhwk/dhwk.prj b/dhwk/dhwk.prj index dba1b3b..45171bc 100644 --- a/dhwk/dhwk.prj +++ b/dhwk/dhwk.prj @@ -5,7 +5,6 @@ vhdl work "source/pci/comm_dec.vhd" vhdl work "source/pci/comm_fsm.vhd" vhdl work "source/pci/config_rd_0.vhd" vhdl work "source/pci/config_space_header.vhd" -vhdl work "source/pci/config_wr_0.vhd" vhdl work "source/pci/connecting_fsm.vhd" vhdl work "source/pci/cont_fsm.vhd" vhdl work "source/pci/data_mux.vhd" diff --git a/dhwk/source/pci/config_space_header.vhd b/dhwk/source/pci/config_space_header.vhd index ca437c0..0b98174 100644 --- a/dhwk/source/pci/config_space_header.vhd +++ b/dhwk/source/pci/config_space_header.vhd @@ -41,6 +41,80 @@ architecture SCHEMATIC of CONFIG_SPACE_HEADER is signal CONF_STATUS :std_logic_vector(31 downto 16); signal CONF_COMMAND :std_logic_vector(15 downto 0); + -- PCI Configuration Space Header + -- + -- \ Bit + -- \ + --Address |31 24|23 16|15 8|7 0| + ----------------------------------------------------------------- + --00 |Device ID |Vendor ID | + --04 |Status |Command | + --08 |Class Code |Revision ID | + --0C |BIST |Header Type |Latency T. |Cache L.S. | + --10-24 |Base Address Register | + --28 |Cardbus CIS Pointer | + --2C |Subsystem ID |Subsystem Vendor ID | + --30 |Expansion ROM Base Address | + --34 |Reserved | + --38 |Reserved | + --3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line | + --40-FF | | + ----------------------------------------------------------------- + + + --PCI Bus Commands + --C/BE[3..0] Command Type + -------------------------------------- + -- 0000 Interrupt Acknowledge + -- 0001 Special Cycle + -- 0010 I/O Read + -- 0011 I/O Write + -- 0100 Reserved + -- 0101 Reserved + -- 0110 Memory Read + -- 0111 Memory Write + -- + -- 1000 Reserved + -- 1001 Reserved + -- 1010 Configuration Read + -- 1011 Configuration Write + -- 1100 Memory Read Multiple + -- 1101 Dual Address Cycle + -- 1110 Memory Read Line + -- 1111 Memory Write and Invalidate + + + --PCI Byte Enable + --C/BE[3..0] gueltige Datenbits + ------------------------------- + -- 0000 AD 31..0 + -- 1000 AD 23..0 + -- 1100 AD 15..0 + -- 1110 AD 7..0 + + constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000"; + constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001"; + constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010"; + constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011"; + constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100"; + constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101"; + constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110"; + constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111"; + constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000"; + constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001"; + constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010"; + constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011"; + constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100"; + constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101"; + constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110"; + constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111"; + + signal CONFIG_ADDR :std_logic_vector(7 downto 0); + signal CONFIG_WRITE :std_logic_vector(3 downto 0); + + ---- + ---- + SIGNAL gnd : std_logic := '0'; SIGNAL vcc : std_logic := '1'; @@ -59,16 +133,6 @@ architecture SCHEMATIC of CONFIG_SPACE_HEADER is READ_SEL : Out std_logic_vector (2 downto 0) ); end component; - component CONFIG_WR_0 - Port ( ADDR_REG : In std_logic_vector (31 downto 0); - CF_WR_COM : In std_logic; - IRDY_REGn : In std_logic; - TRDYn : In std_logic; - CONF_WR_04H : Out std_logic; - CONF_WR_10H : Out std_logic; - CONF_WR_3CH : Out std_logic ); - end component; - begin CONF_DATA_00H <= CONF_DEVICE_ID & VENDOR_ID; CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID; @@ -92,11 +156,6 @@ begin Port Map ( ADDR_REG(31 downto 0)=>ADDR_REG(31 downto 0), CF_RD_COM=>CF_RD_COM, READ_SEL(2 downto 0)=>CONF_READ_SEL(2 downto 0) ); - I8 : CONFIG_WR_0 - Port Map ( ADDR_REG(31 downto 0)=>ADDR_REG(31 downto 0), - CF_WR_COM=>CF_WR_COM, IRDY_REGn=>IRDY_REGn, - TRDYn=>TRDYn, CONF_WR_04H=>CONF_WR_04H, - CONF_WR_10H=>CONF_WR_10H, CONF_WR_3CH=>CONF_WR_3CH ); process (PCI_CLOCK,PCI_RSTn) begin @@ -231,4 +290,42 @@ begin end if; end if; end process; + + + --******************************************************************* + --******************* PCI Write Configuration Address *************** + --******************************************************************* + + CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0); + + + process (CF_WR_COM,IRDY_REGn,TRDYn,CONFIG_ADDR) + begin + + if CF_WR_COM = '1' and IRDY_REGn = '0' and TRDYn = '0' then + + if CONFIG_ADDR = X"04" then + CONFIG_WRITE <= "0001"; + + elsif CONFIG_ADDR = X"10" then + CONFIG_WRITE <= "0010"; + + elsif CONFIG_ADDR = X"3C" then + CONFIG_WRITE <= "0100"; + + -- elsif CONFIG_ADDR = X"40" then + -- CONFIG_WRITE <= "1000"; + else + CONFIG_WRITE <= "0000"; + end if; + else + CONFIG_WRITE <= "0000"; + end if; + end process; + + CONF_WR_04H <= CONFIG_WRITE(0); + CONF_WR_10H <= CONFIG_WRITE(1); + CONF_WR_3CH <= CONFIG_WRITE(2); + --CONF_WR_40H <= CONFIG_WRITE(3); + end SCHEMATIC; diff --git a/dhwk/source/pci/config_wr_0.vhd b/dhwk/source/pci/config_wr_0.vhd deleted file mode 100644 index 9e1e2dc..0000000 --- a/dhwk/source/pci/config_wr_0.vhd +++ /dev/null @@ -1,140 +0,0 @@ --- J.STELZNER --- INFORMATIK-3 LABOR --- 23.08.2006 --- File: CONFIG_WR_0.VHD - -library IEEE; -use IEEE.std_logic_1164.all; - -entity CONFIG_WR_0 is - port - ( - ADDR_REG :in std_logic_vector(31 downto 0); - CF_WR_COM :in std_logic; - IRDY_REGn :in std_logic; - TRDYn :in std_logic; - CONF_WR_04H :out std_logic; - CONF_WR_10H :out std_logic; - CONF_WR_3CH :out std_logic - --CONF_WR_40H :out std_logic - ); -end entity CONFIG_WR_0; - -architecture CONFIG_WR_0_DESIGN of CONFIG_WR_0 is - - -- - -- - -- - -- - -- - -- PCI Configuration Space Header - -- - -- \ Bit - -- \ - --Address |31 24|23 16|15 8|7 0| - ----------------------------------------------------------------- - --00 |Device ID |Vendor ID | - --04 |Status |Command | - --08 |Class Code |Revision ID | - --0C |BIST |Header Type |Latency T. |Cache L.S. | - --10-24 |Base Address Register | - --28 |Cardbus CIS Pointer | - --2C |Subsystem ID |Subsystem Vendor ID | - --30 |Expansion ROM Base Address | - --34 |Reserved | - --38 |Reserved | - --3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line | - --40-FF | | - ----------------------------------------------------------------- - - - --PCI Bus Commands - --C/BE[3..0] Command Type - -------------------------------------- - -- 0000 Interrupt Acknowledge - -- 0001 Special Cycle - -- 0010 I/O Read - -- 0011 I/O Write - -- 0100 Reserved - -- 0101 Reserved - -- 0110 Memory Read - -- 0111 Memory Write - -- - -- 1000 Reserved - -- 1001 Reserved - -- 1010 Configuration Read - -- 1011 Configuration Write - -- 1100 Memory Read Multiple - -- 1101 Dual Address Cycle - -- 1110 Memory Read Line - -- 1111 Memory Write and Invalidate - - - --PCI Byte Enable - --C/BE[3..0] gueltige Datenbits - ------------------------------- - -- 0000 AD 31..0 - -- 1000 AD 23..0 - -- 1100 AD 15..0 - -- 1110 AD 7..0 - - constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000"; - constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001"; - constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010"; - constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011"; - constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100"; - constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101"; - constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110"; - constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111"; - constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000"; - constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001"; - constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010"; - constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011"; - constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100"; - constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101"; - constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110"; - constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111"; - - signal CONFIG_ADDR :std_logic_vector(7 downto 0); - signal CONFIG_WRITE :std_logic_vector(3 downto 0); - - -begin - - --******************************************************************* - --******************* PCI Write Configuration Address *************** - --******************************************************************* - - CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0); - - - process (CF_WR_COM,IRDY_REGn,TRDYn,CONFIG_ADDR) - begin - - if CF_WR_COM = '1' and IRDY_REGn = '0' and TRDYn = '0' then - - if CONFIG_ADDR = X"04" then - CONFIG_WRITE <= "0001"; - - elsif CONFIG_ADDR = X"10" then - CONFIG_WRITE <= "0010"; - - elsif CONFIG_ADDR = X"3C" then - CONFIG_WRITE <= "0100"; - - -- elsif CONFIG_ADDR = X"40" then - -- CONFIG_WRITE <= "1000"; - else - CONFIG_WRITE <= "0000"; - end if; - else - CONFIG_WRITE <= "0000"; - end if; - end process; - - CONF_WR_04H <= CONFIG_WRITE(0); - CONF_WR_10H <= CONFIG_WRITE(1); - CONF_WR_3CH <= CONFIG_WRITE(2); - --CONF_WR_40H <= CONFIG_WRITE(3); - -end architecture CONFIG_WR_0_DESIGN; -- 2.39.5