Firmware for RSB S2: * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0 * http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=4EC6401E-CA1A-47D8-A178-C75D91665CE2 Use the first link for a patchable firmware, the second is just an "update" firmware which will not touch user settings and rights... Documentation: * http://manuals.fujitsu-siemens.com/open.php?ID=4384 * http://cp.literature.agilent.com/litweb/pdf/5988-8687EN.pdf * http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf Software: * http://download.ts.fujitsu.com/prim_supportcd/start.html * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi (DOS utilities (spman.exe)) Buster JRE: * https://upload.glanzmann.de/oracle-java8-jre_8u241_amd64.deb How to flash: * Download the firmware from: http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0 * Extract the .exe file with unzip * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot directory. Make sure that all three files are readable! * Initiate the firmware-upgrade from the web interface: - When upgrading from 6.x, flash the RSB_S2.bin file, which will automatically load the RSB_S2.001 file in the process - When upgrading from 7.x, flash the RSB_S2_SINGLE.bin WARNING: NEVER FLASH THE .001 FILES DIRECTLY, THIS WILL BRICK YOUR BOARD! * Modify RSB_S2_SINGLE.bin with 'firmware' and reflash ;-) (Don't try to modify the other files) Linux notes: * Disable ipmi_si: echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2.conf If you don't do this, the bootup process will take a long time but finally succeed. * Install required perl packages: apt-get install libwww-perl libxml-simple-perl libcrypt-ssleay-perl Session timeouts: * Sessions on the RSBS2 card have a very long timeout of 600 minutes. To change this timeout to (for example) 120 minutes, change the SESSION_MANAGER_SESSION_TIMEOUT to 0x78: $ ./rsbs2.pl -s SESSION_MANAGER_SESSION_TIMEOUT=0x78 name_of_board Pinout: +---------------+---------------+--------------------------------------+---+- | | 2 4 6 8 A C E | | 1 | | | 1 3 5 7 9 B D | | 2 | | +-----+ +------ ------+ +---------+ +-----+ +---+ | | 1 2 | CONN2 | IPMB4 | |IPMB3| J1 | | 3 4 | +---------+ +-----+ + 5 6 | +---------+ USB | 7 8 | | 1 2 3 | | 9 A | +---------+ + +-----+ CONN3 | CONN1 | . . . + +---+ PWR | 1 | | 2 |J2 + +---+ | +-------------+ +-+ | | | | | +---+ +------------+ +------- CONN1: CONN2: CONN3: J1: Repair mode enable 1) 1) ATX-PWR +* 1) J2: Standby power enable 2) 2) ATX-PWR GND* 2) 3) USB D- 3) ATX-PWR +* 3) 4) 4) ATX-PWR GND* 5) USB D+ 5) ATX-RESET +* 6) 6) ATX-RESET GND* 7) USB GND 7) ATX-RESET +* 8) 8) ATX-RESET GND* 9) 9) PWR-SW A) A) PWR-SW B) RESET-SW C) RESET-SW D) E) *) use to connect to the front panel button and pinheader on the mainboard, beware of the polarity! Supermicro exception list ========================= vim /home/sithglan/.java/./deployment/security/exception.sites https://esx-01-mgmt.v101.tuvl.de https://esx-02-mgmt.v101.tuvl.de