X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/rsbs2/blobdiff_plain/27cd8c1175155add17c0b98c285a90244ab9528e..d5e3ce21367fc09cdcff59993d66ea9607e2d333:/rsbs2.pl

diff --git a/rsbs2.pl b/rsbs2.pl
index ae2b462..3b752c2 100755
--- a/rsbs2.pl
+++ b/rsbs2.pl
@@ -15,7 +15,7 @@ my $verbose = 0;
 
 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
-	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
 	ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
 	ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
 	ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
@@ -38,7 +38,7 @@ my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
 	ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
 	ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
-	ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+	ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
 	ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
 	ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
 	ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
@@ -151,7 +151,7 @@ sub _req {
 	$request->content($xml);
 	$response = $ua->request($request);
 	die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
-	XMLin($response->content);
+	XMLin($response->content, SuppressEmpty => '');
 }
 
 sub _getprop {
@@ -196,8 +196,10 @@ sub setprop {
 
 	if ($res->{RESP}->{RC} ne '0x0') {
 		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+		undef;
 	} else {
-		print "${property}: ${oldval} -> ${value}\n";
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
 	}
 }
 
@@ -277,6 +279,22 @@ sub show_all_vars {
 	}
 }
 
+sub usrlist {
+	my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
+	my $res = _req($reqstr);
+	my @users = ();
+
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "FAILED:".$res->{RESP}->{RC}."\n";
+		();
+	} else {
+		foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
+			push @users, $usr->{NAME};
+		}
+	}
+	@users;
+}
+
 sub syslog_debug {
 	my $destination_ip = shift;
 	my $bcast = shift;
@@ -480,15 +498,21 @@ if (@gprop) {
 if (@sprop) {
 	foreach my $p (@sprop) {
 		(my $pr, $v) = split(/=/,$p,2);
-		setprop($pr, $v);
+		my $oldval = setprop($pr, $v);
+		if (defined($oldval)) {
+			print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
+		}
 	}
 }
 
 if ($save ne '') {
-	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
-	        IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP);
+	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+	GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+	ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+	LAST_IP_ADDRESS LAST_NETMASK);
 
 	open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+	print STDERR "saving" if (!$verbose);
 	foreach my $ts (@fw_vars) {
 		next if (grep(/^${ts}$/, @dontsave));
 
@@ -496,18 +520,30 @@ if ($save ne '') {
 		next if ($phash->{PERMS} ne 'RW');
 		
 		print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+		print STDERR "." if (!$verbose);
+	}
+	foreach my $usr (usrlist()) {
+		print STDERR "TODO: save user ${usr}\n";
 	}
 	close(SAVEFILE);
+	print STDERR "done\n" if (!$verbose);
 }
 
 if ($load ne '') {
 	open (LOADFILE, "<${load}") || die "Error opening load-file: $!\n";
+	print STDERR "loading" if (!$verbose);
 	while(<LOADFILE>) {
 		chomp;
 		(my $p, my $v) = split(/=/, $_);
 		setprop($p, $v);
+		print STDERR "." if (!$verbose);
 	}
 	close(LOADFILE);
+	print STDERR "done\n" if (!$verbose);
+	print "Settings loaded, resetting board...\n";
+	my $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardreset"></REQ></RMCSEQ>';
+	_req($reqstr);
+	exit(0);
 }
 
 if ($enable_debug ne '') {