X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/rsbs2/blobdiff_plain/ba34b57f7e3ef0163d4c757f83237a73163acef0..0b58b0e0db185986906cb8a71964f06bfa995b4a:/README.txt diff --git a/README.txt b/README.txt index 6ee2470..d9a21e3 100644 --- a/README.txt +++ b/README.txt @@ -10,13 +10,13 @@ Documentation: * http://cp.literature.agilent.com/litweb/pdf/5988-8686EN.pdf Software: - * http://download.fujitsu-siemens.com/prim_supportcd/start.html - * http://download.fujitsu-siemens.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi + * http://download.ts.fujitsu.com/prim_supportcd/start.html + * http://download.ts.fujitsu.com/prim_supportcd/SVSSoftware/Software/Deployment/PRIMERGY%20Scripting/PRIMERGY%20Scripting%20Toolkit.msi (DOS utilities (spman.exe)) How to flash: * Download the firmware from: - http://support.fujitsu-siemens.de/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0 + http://support.ts.fujitsu.com/Download/ShowDescription.asp?SoftwareGUID=6DB401B3-B0BD-43CB-A3AA-6278B23FBCB0 * Extract the .exe file with unzip * Place RSB_S2.bin, RSB_S2.001 and RSB_S2_SINGLE.bin in the tftpboot directory. Make sure that all three files are readable! @@ -30,12 +30,18 @@ How to flash: Linux notes: * Disable ipmi_si: - echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2 + echo "blacklist ipmi_si" >/etc/modprobe.d/rsbs2.conf If you don't do this, the bootup process will take a long time but finally succeed. * Install required perl packages: apt-get install libwww-perl libxml-simple-perl libcrypt-ssleay-perl +Session timeouts: + * Sessions on the RSBS2 card have a very long timeout of 600 minutes. + To change this timeout to (for example) 120 minutes, change the + SESSION_MANAGER_SESSION_TIMEOUT to 0x78: + $ ./rsbs2.pl -s SESSION_MANAGER_SESSION_TIMEOUT=0x78 name_of_board + Pinout: +---------------+---------------+--------------------------------------+---+- | | 2 4 6 8 A C E | | 1 |