X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/rsbs2/blobdiff_plain/bd1a6723bafed30d7edd496f3cdf530472b89798..920420f7c4af55e877e94d13d1d0ef4631ff8f32:/rsbs2.pl

diff --git a/rsbs2.pl b/rsbs2.pl
index 5255b58..eaae36b 100755
--- a/rsbs2.pl
+++ b/rsbs2.pl
@@ -1,18 +1,21 @@
 #!/usr/bin/perl -w
 
 use LWP::UserAgent;
+use LWP::ConnCache;
 use XML::Simple;
 use Data::Dumper;
 use MIME::Base64;
 use Digest::MD5 qw(md5);
 
-my $ua = LWP::UserAgent->new;
-my $sid;
-my $host;
+my $ua = LWP::UserAgent->new(cookie_jar => {});
+my $url;
+my $poweronms=200;
+my $poweroffms=5000;
+my $verbose = 0;
 
 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
-	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
 	ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
 	ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
 	ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
@@ -32,10 +35,10 @@ my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
 	CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
 	DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
-	DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+	DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
 	ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
 	ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
-	ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+	ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
 	ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
 	ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
 	ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
@@ -129,7 +132,7 @@ sub _crc16 {
 sub _hash {
 	my ($password, $challenge) = @_;
 	my @challenge_bytes = unpack 'c16', decode_base64($challenge);
-	my @pwd_hash            = unpack 'c16', md5($password);
+	my @pwd_hash = unpack 'c16', md5($password);
 	my @xor_bytes;
 	for my $i (0..15) {
 		$xor_bytes[$i] = $challenge_bytes[$i] ^ $pwd_hash[$i];
@@ -142,32 +145,45 @@ sub _hash {
 
 sub _req {
 	my $xml = shift;
-	$request = HTTP::Request->new(POST => "http://${host}/cgi/bin");
-	$request->header(Cookie => "sid=$sid");
+	$request = HTTP::Request->new(POST => "${url}/cgi/bin");
 	$request->content_type('application/x-www-form-urlencoded');
-	$request->content($xml);
+	$request->content('<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ>'.$xml.'</RMCSEQ>');
 	$response = $ua->request($request);
 	die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
-	XMLin($response->content);
+	XMLin($response->content, SuppressEmpty => '')->{RESP};
+}
+
+sub _cmd {
+	my $cmd = shift;
+
+	my $reqstr='<REQ CMD="'.$cmd.'"></REQ>';
+	my $res = _req($reqstr);
+	if ($res->{RC} ne '0x0') {
+		print "${cmd} failed: ".$res->{RC}."\n";
+		undef;
+	}
+
+	$res;
 }
 
 sub _getprop {
 	my $property = shift;
 
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="propget"><PROPLIST><PROP NAME="'.$property.'"/></PROPLIST></REQ>';
 	my $resp = _req($reqstr);
+
+	print "get: ${property}\n" if ($verbose);
 	
-	if ($resp->{RESP}->{RC} ne '0x0') {
-		$resp->{RESP}->{RC};
+	if ($resp->{RC} ne '0x0') {
+		$resp->{RC};
 	} else {
 		$resp;
 	}
 }
 
 sub logout {
-	print "Logout\n";
-	my $request = HTTP::Request->new(GET => "http://${host}/cgi/logout");
-	$request->header(Cookie => "sid=$sid");
+	print "Logout\n" if ($verbose);
+	my $request = HTTP::Request->new(GET => "${url}/cgi/logout");
 	my $response = $ua->request($request);
 	die("While trying to logout: " . $response->status_line . "\n") unless ($response->is_success);
 
@@ -179,62 +195,108 @@ sub setprop {
 	my $property = shift;
 	my $value = shift;
 
-	my $oldval = _getprop($property)->{RESP}->{PROPLIST}->{PROP}->{VAL};
+	my $oldval = _getprop($property)->{PROPLIST}->{PROP}->{VAL};
 
 	if ($value eq $oldval) {
-		print "${property} is already ${value}\n";
+		print "${property} is already ${value}\n" if ($verbose);
 		return;
 	}
 	
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="propset"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></REQ>';
 	my $res = _req($reqstr);
 
-	if ($res->{RESP}->{RC} ne '0x0') {
-		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+	if ($res->{RC} ne '0x0') {
+		print "Error setting ${property} to ${value}: ".$res->{RC}."\n";
+		undef;
 	} else {
-		print "${property}: ${oldval} -> ${value}\n";
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
 	}
 }
 
 sub serveraction {
 	my $action = shift;
 
-	print "${action}...\n";
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ></RMCSEQ>';
+	my $pmode = 2;
+
+	#setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
+	#setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
+
+	#PM Mode
+	setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
+	setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
+
+	print "${action}...\n" if ($verbose);
+	my $reqstr='<REQ CMD="serveraction"><ACT>'.$action.'</ACT></REQ>';
 	my $res = _req($reqstr);
 
-	if ($res->{RESP}->{RC} ne '0x0') {
-		print "FAILED:".$res->{RESP}->{RC}."\n";
+	if ($res->{RC} ne '0x0') {
+		print "FAILED:".$res->{RC}."\n";
+	}
+}
+
+sub powerup {
+	if (_getprop("SERVER_POWER_CHANGE_VIA_IPMI")->{PROPLIST}->{PROP}->{VAL} eq "TRUE") {
+		print "powerup via IPMI\n" if ($verbose);
+		serveraction("powerup");
+	} else {
+		print "powerup via relay (hack)\n" if ($verbose);
+		setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
+		setprop("SERVER_POWER_OFF_PULSE_MS", "0x0");
+		serveraction("powercycle");
 	}
 }
 
+sub powerdown {
+	if (_getprop("SERVER_POWER_CHANGE_VIA_IPMI")->{PROPLIST}->{PROP}->{VAL} eq "TRUE") {
+		print "powerdown via IPMI\n" if ($verbose);
+		serveraction("powerdown");
+	} else {
+		print "powerdown via relay (hack)\n" if ($verbose);
+		setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
+		setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
+		serveraction("powercycle");
+	}
+}
+
+sub powercycle {
+	if (_getprop("SERVER_POWER_CHANGE_VIA_IPMI")->{PROPLIST}->{PROP}->{VAL} eq "TRUE") {
+		print "powercycle via IPMI\n" if ($verbose);
+	} else {
+		print "powercycle via relay\n" if ($verbose);
+		setprop("SERVER_POWER_ON_PULSE_MS", sprintf("0x%x", $poweronms));
+		setprop("SERVER_POWER_OFF_PULSE_MS", sprintf("0x%x", $poweroffms));
+	}
+	serveraction("powercycle");
+}
+
 sub showprop {
 	my $property = shift;
 
-	my $phash = _getprop($property)->{RESP}->{PROPLIST}->{PROP};
+	my $phash = _getprop($property)->{PROPLIST}->{PROP};
 
 	print "${property}: " . ${phash}->{VAL} . " (" . ${phash}->{PERMS} . ")\n";
 }
 
 sub board_properties {
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ></RMCSEQ>';
+	my $reqstr='<REQ CMD="boardpropget"><PROPLIST><PROP NAME=""/></PROPLIST></REQ>';
 	my $resp = _req($reqstr);
 
 	print " * Board Properties:\n";
-	foreach my $bprop (@{$resp->{RESP}->{BPROPLIST}->{BPROP}}) {
+	foreach my $bprop (@{$resp->{BPROPLIST}->{BPROP}}) {
 		print " * " . ${bprop}->{NAME} . ": " . ${bprop}->{VAL} . "\n";
 	}
 }
 
 sub show_boarddesc {
-	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ></RMCSEQ>';
-	my $boarddesc64 = _req($reqstr)->{RESP}->{BPROPLIST}->{BPROP}->{VAL};
+	my $reqstr='<REQ CMD="boardpropget"><BPROPLIST><BPROP NAME="BOARD_DESCRIPTION"/></BPROPLIST></REQ>';
+	my $boarddesc64 = _req($reqstr)->{BPROPLIST}->{BPROP}->{VAL};
 	my $boarddesc = decode_base64($boarddesc64);
 	my @board = split(//, $boarddesc);
 	foreach my $byte (@board) {
 		printf ("0x%02x ", ord($byte));
-}
-print "\n";
+	}
+	print "\n";
 }
 
 sub show_all_vars {
@@ -243,127 +305,541 @@ sub show_all_vars {
 	}
 }
 
+sub usrlist {
+	my $res = _cmd("usrlist");
+	my @users = ();
+
+	if ($res->{RC} ne '0x0') {
+		print "FAILED:".$res->{RC}."\n";
+		();
+	} else {
+		if (ref($res->{USRLIST}->{USER}) eq 'ARRAY') {
+			foreach my $usr (@{$res->{USRLIST}->{USER}}) {
+				push @users, $usr->{NAME};
+			}
+		} else {
+			push @users, $res->{USRLIST}->{USER}->{NAME};
+		}
+	}
+	@users;
+}
+
+sub getusrprops {
+	my $usr = shift;
+
+	my $reqstr = '<REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ>';
+	my $res = _req($reqstr)->{USER}->{PROP};
+
+	$res;
+}
+
+sub usradd {
+	my $usr = shift;
+
+	my $reqstr='<REQ CMD="usradd"><USER NAME="'.$usr.'"/></REQ>';
+	my $res = _req($reqstr);
+	if ($res->{RC} ne '0x0') {
+		print "FAILED:".$res->{RC}."\n";
+	}
+}
+
+sub setusrprop {
+	my $usr = shift;
+	my $property = shift;
+	my $value = shift;
+
+	my $reqstr='<REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ>';
+	my $res = _req($reqstr);
+
+	my $oldval = ${res}->{USER}->{PROP}->{VAL};
+
+	if ($value eq $oldval) {
+		print "${property} is already ${value}\n" if ($verbose);
+		return;
+	}
+	
+	$reqstr='<REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ>';
+	$res = _req($reqstr);
+
+	if ($res->{RC} ne '0x0') {
+		print "Error setting ${property} to ${value}: ".$res->{RC}."\n";
+		undef;
+	} else {
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
+	}
+}
+
 sub syslog_debug {
 	my $destination_ip = shift;
 	my $bcast = shift;
 
-	$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
-	$res = _req($reqstr);
-	if ($res->{RESP}->{RC} ne '0x0') {
-		print "FAILED:".$res->{RESP}->{RC}."\n";
+	my $reqstr='<REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ>';
+	my $res = _req($reqstr);
+	if ($res->{RC} ne '0x0') {
+		print "FAILED:".$res->{RC}."\n";
 		return;
 	}
 
-	$reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ></RMCSEQ>';
+	$reqstr='<REQ CMD="dbgmsgcfg"><ON>TRUE</ON><CHANNELMASK>0x1</CHANNELMASK><MMASK>0x1</MMASK><STORE>FALSE</STORE></REQ>';
 	$res = _req($reqstr);
-	if ($res->{RESP}->{RC} ne '0x0') {
-		print "FAILED:".$res->{RESP}->{RC}."\n";
+	if ($res->{RC} ne '0x0') {
+		print "FAILED:".$res->{RC}."\n";
 		return;
 	}
 
 	print "Debug messages will be sent to ${destination_ip} (broadcast: ${bcast})\n";
 }
 
+sub get_sensors {
+	my $slist= _cmd("sensorlist");
+	my @sensors;
+
+	if ($slist->{RC} ne '0x0') {
+		print "Error getting sensorlist: ".$slist->{RC}."\n";
+		return;
+	}
+
+	my $req = '<REQ CMD="sensorpropget"><HANDLE>'.$slist->{HANDLE}.'</HANDLE><SENSORLIST>';
+	foreach my $s (@{$slist->{SENSORLIST}->{SENSOR}}) {
+		$req .= '<SENSOR KEY="'.$s->{KEY}.'"/>';
+	}
+	$req .= '</SENSORLIST></REQ>';
+
+	my $sprop = _req($req);
+	foreach my $s (@{$sprop->{SENSORLIST}->{SENSOR}}) {
+		my $sensor = {};
+		foreach my $sp (@{$s->{PROP}}) {
+			$sensor->{$sp->{NAME}} = $sp->{VAL};
+		}
+
+		next if (!defined($sensor->{NAME}));
+		$sensor->{VAL} = '0' if ($sensor->{VAL} eq '');
+		push @sensors, $sensor;
+	}
+	@sensors;
+}
+
+sub show_sensors {
+	my @sensors = get_sensors();
+
+	foreach my $sensor (@sensors) {
+		print $sensor->{NAME}.": ".$sensor->{VAL}.$sensor->{UNITS};
+
+		my @info = ();
+		foreach my $field (qw(MIN MAX LOW_NON_CRITICAL UPPER_NON_CRITICAL LOW_CRITICAL UPPER_CRITICAL)) {
+			if ($sensor->{$field} ne '') {
+				push @info, "${field}: ".$sensor->{$field}.$sensor->{UNITS};
+			}
+		}
+
+		print "\t(".join(", ",@info).")" if (@info);
+
+		print "\n";
+	}
+}
+
+sub status {
+	my $boardstatus = _cmd("boardstatus")->{STATUS};
+	my $fw = _cmd("boardfwstatus");
+	my $boardfwstatus = $fw->{STATUS};
+	my $boardfwprogress = $fw->{PROGRESS};
+	$bs = hex($boardstatus);
+
+	print "Server Power:\t\t" . (($bs & 0x01) ? "ON" : "OFF") . "\n";
+	print "External PSU:\t\t" . (($bs & 0x02) ? "ON" : "OFF") . "\n";
+	print "Battery:\t\t";
+	if ($bs & 0x04) {
+		if ($bs & 0x08) {
+			print "LOW\n";
+		} elsif ($bs & 0x800) {
+			print "ON\n";
+		} else {
+			print "UNKNOWN\n";
+		}
+	} else {
+		print "OFF\n";
+	}
+	print "Standby Power:\t\t" . (($bs & 0x08) ? "ON" : "OFF") . "\n";
+	print "LAN:\t\t\t" . (($bs & 0x10) ? "CONNECTED" : "NC") . "\n";
+	print "I2C:\t\t\t" . (($bs & 0x20) ? "CONNECTED" : "NC") . "\n";
+	print "SMM:\t\t\t" . (($bs & 0x40) ? "CONNECTED" : "NC") . "\n";
+	print "Instrumentation:\t" . (($bs & 0x200) ? "CONNECTED" : "NC") . "\n";
+	print "ICMB:\t\t\t" . (($bs & 0x400) ? "CONNECTED" : "NC") . "\n";
+	print "PPP:\t\t\t" . (($bs & 0x10000) ? "ON" : "OFF") . "\n";
+	print "Paging:\t\t\t" . (($bs & 0x20000) ? "ON" : "OFF") . "\n";
+	print "COM redirection:\t" . (($bs & 0x100000) ? "ON" : "OFF") . "\n";
+	print "UART redirect:\t\t" . (($bs & 0x200000) ? "ON" : "OFF") . "\n";
+	print "UART redirect pending:\t" . (($bs & 0x400000) ? "TRUE" : "FALSE") . "\n";
+	print "Hex BoardStatus:\t${boardstatus}\n";
+	my $fws = hex ($boardfwstatus);
+	print "FW status:\t\t";
+	if ($fws == 3 || $fws == 32771) {
+		print "WAITING";
+	} else {
+		print "DONE";
+	}
+	print " (${boardfwstatus})\n";
+	if (($fws & 0x8080) || ($fws & 0x80)) {
+		printf("FW error:\t\t0x%02x\n", ($fws & 0xff));
+	}
+	if ($fws != 0) {
+		print "FW upgrade progress:\t${boardfwprogress}\n";
+	}
+	print "\nSensors:\n";
+	show_sensors();
+}
+
+sub spawn_gui {
+	my $base = shift;
+	$ENV{'AWT_TOOLKIT'} = 'MToolkit';
+	open(APPLET,"|appletviewer -J-Djava.security.policy=applet.policy -J-Djava.net.preferIPv4Stack=true /dev/stdin");
+	print APPLET '<HTML><HEAD><TITLE>RSB S2 User Interface</TITLE></HEAD>';
+	print APPLET '<BODY>';
+	print APPLET '<object width="640" height="480">';
+	print APPLET '<param name="code" value="com/agilent/rmc/mgui/RmcUI.class">';
+	print APPLET '<param name="codebase" value="'.$base.'/">';
+	print APPLET '<param name="archive" value="gui.jar, msa_shared.jar, msa_shared_comm.jar, msa_shared_oem.jar">';
+	print APPLET '</object>';
+	print APPLET '</BODY></HTML>';
+	close(APPLET);
+}
+
 sub login {
 	my $user = shift;
 	my $pass = shift;
 
-	my $response = $ua->get("http://${host}/cgi/challenge");
+	my $response = $ua->get("${url}/cgi/challenge");
 	die $response->status_line if (!($response->is_success));
 
 	my $xmlin = XMLin($response->decoded_content);
 	die "Error getting Challenge: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 	my $challenge = $xmlin->{CHALLENGE};
-	print "Challenge: ${challenge}\n";
+	print "Challenge: ${challenge}\n" if ($verbose);
 
-	$sid = $response->headers->header('Set-Cookie');
+	my $sid = $response->headers->header('Set-Cookie');
 	die "No SessionID!" if (!defined($sid));
 	chomp($sid);
 	$sid =~ s/.*sid=(.*);.*/$1/;
-	print "SID: ${sid}\n";
+	print "SID: ${sid}\n" if ($verbose);
 
 	my $login_hash = _hash($pass, $challenge);
-	print "Hash: ${login_hash}\n";
+	print "Hash: ${login_hash}\n" if ($verbose);
 
-	my $request = HTTP::Request->new(GET => "http://${host}/cgi/login?user=${user}&hash=${login_hash}");
-	$request->header(Cookie => "sid=$sid");
+	my $request = HTTP::Request->new(GET => "${url}/cgi/login?user=${user}&hash=${login_hash}");
 	$response = $ua->request($request);
 	die("While trying to login: " . $response->status_line . "\n") unless ($response->is_success);
 
 	$xmlin = XMLin($response->decoded_content);
 	die "Error logging in: ".$xmlin->{RC} if ($xmlin->{RC} ne '0x0');
 
-	$sid;
+	print "Logged in\n" if ($verbose);
+}
+
+sub read_inifile {
+	my $filename = shift;
+
+	open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
+	my %Ini = ();
+	my @sections = ();
+	while(<INIFILE>) {
+		chomp;
+	
+		next if (m/^#/);
+	
+		if (m/^\s*\[(.*)\]\s*$/) {
+			push @sections, $1;
+			next;
+		}
+	
+		if (@sections) {
+			if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
+				${$Ini{$sections[$#sections]}}{$1} = $2;
+			}
+		}
+	}
+	close(INIFILE);
+
+	%Ini;
+}
+
+my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
+
+my $valid_arg = 0;
+my $powup = 0;
+my $powdown = 0;
+my $powcyc = 0;
+my $reset = 0;
+my $resetrsbs2 = 0;
+my @sprop = ();
+my @gprop = ();
+my @xmlsend = ();
+my $show = 0;
+my $enable_debug = "";
+my $save = "";
+my $load = "";
+my $showstat = 0;
+my $gui = 0;
+my $hostalias;
+
+while (defined($ARGV[0])) {
+	SWITCH: for ($ARGV[0]) {
+		/^-v$/	&& do {
+				$verbose = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-g$/ && do {
+				shift @ARGV;
+				push @gprop, shift @ARGV;
+				last SWITCH;
+			};
+		/^-s$/ && do {
+				shift @ARGV;
+				push @sprop, shift @ARGV;
+				last SWITCH;
+			};
+		/^-u$/ && do {
+				$powup = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-d$/ && do {
+				$powdown = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-c$/ && do {
+				$powcyc = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-r$/ && do {
+				$reset = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-R$/ && do {
+				$resetrsbs2 = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-l$/ && do {
+				shift @ARGV;
+				$enable_debug = shift @ARGV;
+				last SWITCH;
+			};
+		/^-x$/ && do {
+				$show = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-X$/ && do {
+				shift @ARGV;
+				push @xmlsend, shift @ARGV;
+				last SWITCH;
+			};
+		/^-b$/ && do {
+				$showstat = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-G$/ && do {
+				$gui = 1;
+				shift @ARGV;
+				last SWITCH;
+			};
+		/^-save$/ && do {
+				shift @ARGV;
+				$save = shift @ARGV;
+				last SWITCH;
+			};
+		/^-load$/ && do {
+				shift @ARGV;
+				$load = shift @ARGV;
+				last SWITCH;
+			};
+
+		if (defined($ARGV[0])) {
+			$hostalias = $ARGV[0];
+			shift(@ARGV);
+			$valid_arg = 1;
+		}
+
+		while ( defined($ARGV[0]) ) { $valid_arg = 0; shift(@ARGV); }
+	}
 }
 
-open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!");
-my %Config = ();
-my @sections = ();
-while(<INIFILE>) {
-	chomp;
+if ($valid_arg && (!defined($Config{$hostalias}))) {
+	$valid_arg = 0;
+}
 
-	next if (m/^#/);
+if (!$valid_arg) {
+	print STDERR "Usage: $0 options card-alias\n";
+	print STDERR "Options:\n";
+	print STDERR "\t-g property\tget property value\n";
+	print STDERR "\t-s property=val\tset property value\n";
+	print STDERR "\t-u\t\tpowerup\n";
+	print STDERR "\t-d\t\tpowerdown\n";
+	print STDERR "\t-c\t\tpowercycle\n";
+	print STDERR "\t-r\t\treset\n";
+	print STDERR "\t-R\t\treset RSB S2 board\n";
+	print STDERR "\t-x\t\tshow all properties, variables and settings\n";
+	print STDERR "\t-l IP\t\tsend SYSLOG debug messages to IP\n";
+	print STDERR "\t-b\t\tshow board/server status\n";
+	print STDERR "\t-X\t\tsend raw XML string (start with REQ tag)\n";
+	print STDERR "\t-G\t\tstart GUI in appletviewer\n";
+	print STDERR "\t-v\t\tverbose\n";
+	print STDERR "\t-save file\tsave configuration to 'file'\n";
+	print STDERR "\t-load file\tload configuration from 'file'\n";
+	print STDERR "\n";
+	print STDERR "card-alias\tone of: ";
+	foreach my $alias (keys(%Config)) {
+		print STDERR "\"${alias}\" ";
+	}
+	print STDERR "(see ~/.rsbs2rc)\n";
+	exit(1);
+}
+
+my $host = ${$Config{$hostalias}}{"host"};
+$poweronms = ${$Config{$hostalias}}{"poweronms"} if (defined(${$Config{$hostalias}}{"poweronms"}));
+$poweroffms = ${$Config{$hostalias}}{"poweroffms"} if (defined(${$Config{$hostalias}}{"poweroffms"}));
+
+my $ssl = ${$Config{$hostalias}}{"ssl"};
+my $port = ${$Config{$hostalias}}{"port"};
+
+if (defined($ssl) && (lc($ssl) eq 'yes')) {
+	$ENV{HTTPS_DEBUG} = 1;
+	$ENV{HTTPS_VERSION} = 3;
+	$port = 443 if (!defined($port));
+	$url = "https://${host}:${port}";
+} else {
+	$port = 80 if (!defined($port));
+	$url = "http://${host}:${port}";
+}
 
-	if (m/^\s*\[(.*)\]\s*$/) {
-		push @sections, $1;
-		next;
+if ($gui) {
+	spawn_gui($url);
+}
+
+login(${$Config{$hostalias}}{"user"}, ${$Config{$hostalias}}{"pass"});
+
+if ($show) {
+	show_boarddesc();
+	board_properties();
+	show_all_vars();
+}
+
+if (@gprop) {
+	foreach my $p (@gprop) {
+		showprop($p);
 	}
+}
 
-	if (@sections) {
-		if (m/^\s*(.+)\s*=\s*(.*)\s*$/) {
-			${$Config{$sections[$#sections]}}{$1} = $2;
+if (@sprop) {
+	foreach my $p (@sprop) {
+		(my $pr, $v) = split(/=/,$p,2);
+		my $oldval = setprop($pr, $v);
+		if (defined($oldval)) {
+			print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
 		}
 	}
 }
-close(INIFILE);
 
-$host = ${$Config{$sections[0]}}{"host"};
+if (@xmlsend) {
+	foreach my $x (@xmlsend) {
+		$Data::Dumper::Terse = 1;
+		print Dumper(_req($x));
+	}
+}
 
-$sid = login(${$Config{$sections[0]}}{"user"}, ${$Config{$sections[0]}}{"pass"});
+if ($save ne '') {
+	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+	GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+	ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+	LAST_IP_ADDRESS LAST_NETMASK);
+
+	open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+	print SAVEFILE "[global]\n";
+	print STDERR "saving" if (!$verbose);
+	foreach my $ts (@fw_vars) {
+		next if (grep(/^${ts}$/, @dontsave));
+
+		my $phash = _getprop($ts)->{PROPLIST}->{PROP};
+		next if ($phash->{PERMS} ne 'RW');
+		
+		print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+		print STDERR "." if (!$verbose);
+	}
+	foreach my $usr (usrlist()) {
+		print SAVEFILE "\n[${usr}]\n";
+		foreach my $up (@{getusrprops($usr)}) {
+			next if ($up->{PERMS} ne 'RW');
 
-show_boarddesc();
+			print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
+		}
+		print STDERR "." if (!$verbose);
+	}
+	close(SAVEFILE);
+	print STDERR "done\n" if (!$verbose);
+}
+
+if ($load ne '') {
+	my %loadfile = read_inifile("${load}");
+	print STDERR "loading" if (!$verbose);
 
-#showprop("FP_REMOTE_POWER");
-#showprop("FP_REMOTE_BOOT");
-#showprop("SERVER_HARD_RESET_VIA_IPMI");
-#showprop("SERVER_HARD_RESET_PULSE_MS");
-#showprop("SERVER_POWER_CHANGE_VIA_IPMI");
-#showprop("SERVER_POWER_ON_MODE");
-#showprop("SERVER_POWER_ON_PULSE_MS");
-#showprop("SERVER_POWER_OFF_MODE");
-#showprop("SERVER_POWER_OFF_PULSE_MS");
+	foreach my $p (keys(%{$loadfile{'global'}})) {
+		setprop($p, $loadfile{'global'}->{$p});
+		print STDERR "." if (!$verbose);
+	}
 
-board_properties();
+	my @users = usrlist();
+	foreach my $usr (keys(%loadfile)) {
+		next if ($usr eq 'global');
+		if (!grep(/^${usr}$/, @users)) {
+			print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
+			usradd($usr);
+		}
+		foreach my $p (keys(%{$loadfile{$usr}})) {
+			setusrprop($usr, $p, $loadfile{$usr}->{$p});
+			print STDERR "." if (!$verbose);
+		}
+	}
+	print STDERR "done\n" if (!$verbose);
+	print "Settings loaded, resetting board...\n";
+	_cmd("boardreset");
+	exit(0);
+}
 
-#show_all_vars();
+if ($enable_debug ne '') {
+	syslog_debug($enable_debug, "TRUE");
+}
 
-syslog_debug("255.255.255.255", "TRUE");
+if ($reset) {
+	print "hardreset\n" if ($verbose);
+	serveraction("hardreset");
+}
 
-#server_power_on modes: (com/agilent/rmc/mgui/panels/PowerMgmtConf.class)
-#0: l_pmconf_option_disabled
-#1: l_pmconf_option_atx
-#2: l_pmconf_option_relay
-#default: disabled
+if ($powup) {
+	powerup();
+}
 
-my $pmode = 2;
+if ($powdown) {
+	powerdown();
+}
 
-setprop("SERVER_HARD_RESET_VIA_IPMI", "FALSE");
-setprop("SERVER_POWER_CHANGE_VIA_IPMI", "FALSE");
-#Power Mgmt. Pane
-setprop("FP_REMOTE_POWER", "TRUE");
-#PM Mode
-setprop("SERVER_POWER_ON_MODE", sprintf("0x%x", $pmode));
-setprop("SERVER_POWER_OFF_MODE", sprintf("0x%x", $pmode));
-#Hack: Abuse powercycloe for powerup and down...
-#setprop("SERVER_POWER_ON_PULSE_MS", "0x0");
+if ($powcyc) {
+	powercycle();
+}
 
-#$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardpropset"><BPROP NAME="BOARD_DESCRIPTION"><VAL>'.$boarddesc_new.'</VAL></BPROP></REQ></RMCSEQ>';
-#print $reqstr."\n";
-#print Dumper(_req($reqstr));
+if ($showstat) {
+	status();
+}
 
-serveraction("hardreset");
-serveraction("powerup");
-serveraction("powerdown");
-serveraction("powercycle");
+if ($resetrsbs2) {
+	print "Resetting board...\n";
+	_cmd("boardreset");
+	exit(0);
+}
 
 logout();