X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/rsbs2/blobdiff_plain/e7ae5b6c2e684ce38ac527a7c6a0423322ff2669..c9427cf83b4389d0a3f03844c55ae990d5bec6f3:/rsbs2.pl?ds=inline

diff --git a/rsbs2.pl b/rsbs2.pl
index ee813f8..debcc87 100755
--- a/rsbs2.pl
+++ b/rsbs2.pl
@@ -15,7 +15,7 @@ my $verbose = 0;
 
 my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP
-	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME DHCP_CONFIGURE_DNS
+	ENABLE_DNS DNS_SERVER DNS_DOMAIN_NAME
 	ACCESS_CONTROL_SERVER_1 ACCESS_CONTROL_SERVER_2 ACCESS_CONTROL_SERVERS
 	ACPI_DISABLE_BIOS_SCAN ACPI_FORCE_RSDP_ADDRESS ACPI_FORCE_RSDT_ADDRESS
 	ACPI_RSDP_BIOS_ROM_ADDRESS ACPI_SCAN_DELAY_SECONDS AMR_AUTH_METHOD
@@ -35,10 +35,10 @@ my @fw_vars = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
 	CONSOLE_VIDEO_PARAM_MODE CONTACT CONTACT_PHONE CRIT_TEMP_SHUTDOWN
 	CRIT_VOLT_SHUTDOWN DHCP_ADD_EXTENSION DHCP_ADD_SERIAL
 	DHCP_CONFIGURE_DNS DHCP_HOSTNAME_EXT DHCP_SERVER DHCP_USE_CARDNAME
-	DIAG_URL DNS_DOMAIN_NAME DNS_SERVER ENABLE_ANON_IPMI ENABLE_ANON_PCI
+	DIAG_URL ENABLE_ANON_IPMI ENABLE_ANON_PCI
 	ENABLE_ANON_WEB ENABLE_AVR_CHIP_DETECT ENABLE_BMC_AUTODETECT
 	ENABLE_BMC_TIMESYNC ENABLE_CRTC_FETCH ENABLE_DHCP ENABLE_DHCP_HOSTNAME
-	ENABLE_DNS ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
+	ENABLE_DS_CONNECTIVITY ENABLE_IO_UART_DECODER ENABLE_LAN_100
 	ENABLE_LAN_AUTONEG ENABLE_LAN_FDUPLEX ENABLE_MEM_UART_DECODER
 	ENABLE_PPP ENABLE_REMOTE_FLOPPY_BOOT ENABLE_SELF_DELETE
 	ENABLE_SERIAL_DBG ETHDRIVER_SID EXPROM_BANNER EXPROM_EBDA_COMPATIBILITY
@@ -151,7 +151,7 @@ sub _req {
 	$request->content($xml);
 	$response = $ua->request($request);
 	die("Error in request: " . $response->status_line . "\n") unless ($response->is_success);
-	XMLin($response->content);
+	XMLin($response->content, SuppressEmpty => '');
 }
 
 sub _getprop {
@@ -196,8 +196,10 @@ sub setprop {
 
 	if ($res->{RESP}->{RC} ne '0x0') {
 		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+		undef;
 	} else {
-		print "${property}: ${oldval} -> ${value}\n";
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
 	}
 }
 
@@ -277,12 +279,78 @@ sub show_all_vars {
 	}
 }
 
+sub usrlist {
+	my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrlist"></REQ></RMCSEQ>';
+	my $res = _req($reqstr);
+	my @users = ();
+
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "FAILED:".$res->{RESP}->{RC}."\n";
+		();
+	} else {
+		if (ref($res->{RESP}->{USRLIST}->{USER}) eq 'ARRAY') {
+			foreach my $usr (@{$res->{RESP}->{USRLIST}->{USER}}) {
+				push @users, $usr->{NAME};
+			}
+		} else {
+			push @users, $res->{RESP}->{USRLIST}->{USER}->{NAME};
+		}
+	}
+	@users;
+}
+
+sub getusrprops {
+	my $usr = shift;
+
+	my $reqstr = '<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"></USER></REQ></RMCSEQ>';
+	my $res = _req($reqstr)->{RESP}->{USER}->{PROP};
+
+	$res;
+}
+
+sub usradd {
+	my $usr = shift;
+
+	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usradd"><USER NAME="michael"/></REQ></RMCSEQ>';
+	my $res = _req($reqstr);
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "FAILED:".$res->{RESP}->{RC}."\n";
+	}
+}
+
+sub setusrprop {
+	my $usr = shift;
+	my $property = shift;
+	my $value = shift;
+
+	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropget"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"></PROP></USER></REQ></RMCSEQ>';
+	my $res = _req($reqstr);
+
+	my $oldval = ${res}->{RESP}->{USER}->{PROP}->{VAL};
+
+	if ($value eq $oldval) {
+		print "${property} is already ${value}\n" if ($verbose);
+		return;
+	}
+	
+	$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="usrpropset"><USER NAME="'.$usr.'"><PROP NAME="'.$property.'"><VAL>'.$value.'</VAL></PROP></USER></REQ></RMCSEQ>';
+	$res = _req($reqstr);
+
+	if ($res->{RESP}->{RC} ne '0x0') {
+		print "Error setting ${property} to ${value}: ".$res->{RESP}->{RC}."\n";
+		undef;
+	} else {
+		print "${property}: ${oldval} -> ${value}\n" if ($verbose);
+		$oldval;
+	}
+}
+
 sub syslog_debug {
 	my $destination_ip = shift;
 	my $bcast = shift;
 
-	$reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
-	$res = _req($reqstr);
+	my $reqstr='<?xml version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="dbgmsglancfg"><IP>'.${destination_ip}.'</IP><BCAST>'.${bcast}.'</BCAST><STORE>FALSE</STORE></REQ></RMCSEQ>';
+	my $res = _req($reqstr);
 	if ($res->{RESP}->{RC} ne '0x0') {
 		print "FAILED:".$res->{RESP}->{RC}."\n";
 		return;
@@ -330,26 +398,34 @@ sub login {
 	$sid;
 }
 
-open(INIFILE,"<$ENV{HOME}/.rsbs2rc") || die("can't open config: $ENV{HOME}/.rsbs2rc: $!");
-my %Config = ();
-my @sections = ();
-while(<INIFILE>) {
-	chomp;
+sub read_inifile {
+	my $filename = shift;
 
-	next if (m/^#/);
-
-	if (m/^\s*\[(.*)\]\s*$/) {
-		push @sections, $1;
-		next;
-	}
-
-	if (@sections) {
-		if (m/^\s*(.+)\s*=\s*(.*)\s*$/) {
-			${$Config{$sections[$#sections]}}{$1} = $2;
+	open(INIFILE,"<${filename}") || die("can't open config: ${filename}: $!");
+	my %Ini = ();
+	my @sections = ();
+	while(<INIFILE>) {
+		chomp;
+	
+		next if (m/^#/);
+	
+		if (m/^\s*\[(.*)\]\s*$/) {
+			push @sections, $1;
+			next;
+		}
+	
+		if (@sections) {
+			if (m/^\s*([^=]+)\s*=\s*(.*)\s*$/) {
+				${$Ini{$sections[$#sections]}}{$1} = $2;
+			}
 		}
 	}
+	close(INIFILE);
+
+	%Ini;
 }
-close(INIFILE);
+
+my %Config = read_inifile("$ENV{HOME}/.rsbs2rc");
 
 my $valid_arg = 0;
 my $powup = 0;
@@ -432,7 +508,7 @@ while (defined($ARGV[0])) {
 	}
 }
 
-if ($valid_arg && (!defined(${$Config{$hostalias}}{'host'}))) {
+if ($valid_arg && (!defined($Config{$hostalias}))) {
 	$valid_arg = 0;
 }
 
@@ -452,7 +528,7 @@ if (!$valid_arg) {
 	print STDERR "\t-load file\tload configuration from 'file'\n";
 	print STDERR "\n";
 	print STDERR "card-alias\tone of: ";
-	foreach my $alias (@sections) {
+	foreach my $alias (keys(%Config)) {
 		print STDERR "\"${alias}\" ";
 	}
 	print STDERR "(see ~/.rsbs2rc)\n";
@@ -480,15 +556,22 @@ if (@gprop) {
 if (@sprop) {
 	foreach my $p (@sprop) {
 		(my $pr, $v) = split(/=/,$p,2);
-		setprop($pr, $v);
+		my $oldval = setprop($pr, $v);
+		if (defined($oldval)) {
+			print "${pr}: ${oldval} -> ${v}\n" if (!$verbose);
+		}
 	}
 }
 
 if ($save ne '') {
-	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX GATEWAY
-	        IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE ENABLE_DHCP);
+	my @dontsave = qw(ENABLE_LAN_AUTONEG ENABLE_LAN_100 ENABLE_LAN_FDUPLEX
+	GATEWAY IP_ADDRESS NETMASK TFTP_FIRMWARE_FILE TFTP_ADDR_FIRMWARE
+	ENABLE_DHCP MAC_ADDRESS LAST_CARD_NAME LAST_ENABLE_DHCP LAST_GATEWAY
+	LAST_IP_ADDRESS LAST_NETMASK);
 
 	open (SAVEFILE, ">${save}") || die "Error opening save-file: $!\n";
+	print SAVEFILE "[global]\n";
+	print STDERR "saving" if (!$verbose);
 	foreach my $ts (@fw_vars) {
 		next if (grep(/^${ts}$/, @dontsave));
 
@@ -496,18 +579,47 @@ if ($save ne '') {
 		next if ($phash->{PERMS} ne 'RW');
 		
 		print SAVEFILE "${ts}=".$phash->{VAL}."\n";
+		print STDERR "." if (!$verbose);
+	}
+	foreach my $usr (usrlist()) {
+		print SAVEFILE "\n[${usr}]\n";
+		foreach my $up (@{getusrprops($usr)}) {
+			next if ($up->{PERMS} ne 'RW');
+
+			print SAVEFILE $up->{NAME}."=".$up->{VAL}."\n";
+		}
+		print STDERR "." if (!$verbose);
 	}
 	close(SAVEFILE);
+	print STDERR "done\n" if (!$verbose);
 }
 
 if ($load ne '') {
-	open (LOADFILE, "<${load}") || die "Error opening load-file: $!\n";
-	while(<LOADFILE>) {
-		chomp;
-		(my $p, my $v) = split(/=/, $_);
-		setprop($p, $v);
+	my %loadfile = read_inifile("${load}");
+	print STDERR "loading" if (!$verbose);
+
+	foreach my $p (keys(%{$loadfile{'global'}})) {
+		setprop($p, $loadfile{'global'}->{$p});
+		print STDERR "." if (!$verbose);
+	}
+
+	my @users = usrlist();
+	foreach my $usr (keys(%loadfile)) {
+		next if ($usr eq 'global');
+		if (!grep(/^${usr}$/, @users)) {
+			print STDERR "\nAdding user \"${usr}\".\n" if ($verbose);
+			usradd($usr);
+		}
+		foreach my $p (keys(%{$loadfile{$usr}})) {
+			setusrprop($usr, $p, $loadfile{$usr}->{$p});
+			print STDERR "." if (!$verbose);
+		}
 	}
-	close(LOADFILE);
+	print STDERR "done\n" if (!$verbose);
+	print "Settings loaded, resetting board...\n";
+	my $reqstr='<?XML version="1.0"?><?RMCXML version="1.0"?><RMCSEQ><REQ CMD="boardreset"></REQ></RMCSEQ>';
+	_req($reqstr);
+	exit(0);
 }
 
 if ($enable_debug ne '') {