[usb-driver] / index.html

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<HTML>
	<HEAD>
		<TITLE>XILINX USB/Parallel JTAG cables on Linux without windrvr</TITLE>
	</HEAD>
	<BODY BGCOLOR="#FFFFFF" TEXT="#000000">
		<H1>XILINX JTAG tools on Linux without proprietary kernel modules</H1>
		<H2>About</H2>
		<P>
		When using <a href="http://www.xilinx.com">XILINX</a> JTAG software like Impact, Chipscope and XMD
		on Linux, the proprietary kernel <i>windrvr</i> module from <a href="http://www.jungo.com">Jungo</a>
		is needed to access the parallel- or usb-cable.
		As this module does not work with current linux kernel versions (&gt; 2.6.18) a library was developed,
		which emulates the module in userspace and allows the tools to access the JTAG cable without the need
		for a proprietary kernel module.
		</P>
		<P>
		The library uses <a href="http://libusb.sourceforge.net/">libusb</a> to access USB devices and the
		<a href="http://www.linuxfocus.org/common/src/article205/ppdev.html">ppdev</a> interface to communicate
		with parallel cables. The parallel part currently only supports Parallel Cable III mode (and PCIV in
		PCIII compatibility mode) as the faster PCIV modes use another kernel module which is not emulated by
		this library. So you are limited to a 200kHz JTAG clock when using Parallel Cable IV with this software.
		The USB cable is supported at full speed.
		</P>
		<P>
		The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
		extended to also support parallel cables.
		</P>
		<H2>Supported Cables</H2>
		The following cables are reported to work with this driver:
		<ul>
			<li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9LP</a></li>
			<li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>
			<li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>
			<li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
			<li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
			<li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&amp;Nav2=Cables&amp;Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
		</ul>
		<H2>Supported Software</H2>
		The following software is reported to work with this driver:
		<ul>
			<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1SP3</a></li>
			<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1SP2</a></li>
			<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1SP1</a></li>
			<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 8.2SP3</a></li>
			<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 8.1SP3</a></li>
			<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.03i</a></li>
			<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.02i</a></li>
			<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 8.2.04i</a></li>
			<li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.2.02i</a></li>
		</ul>
		<H2>Download</H2>
		<ul>
			<li>Download <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver.tar.gz">usb-driver.tar.gz</a> (to build it, you need to have the libusb development package installed. It is called libusb-dev on Debian.)</li>
			<li>Read the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/*checkout*/usb-driver/README">README</a></li>
			<li>Browse the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/">CVS repository</a></li>
			<li>Precompiled <a href="libusb-driver.so">libusb-driver.so</a> for Debian Etch, but better build your own</li>
		</ul>
		<H2>Links</H2>
		<ul>
			<li><a href="http://groups.google.com/group/comp.arch.fpga/msg/2dfa36541174a4f2">Ubuntu installation instructions by Luzerne</a></li>
			<li><a href="http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/03/msg00101.html">Ubuntu installation instructions by Paul-Armand Verhaegen</a></li>
			<li><a href="http://groups.google.com/group/comp.arch.fpga/browse_frm/thread/f149e5b6028e2c70">Initial announcement on comp.arch.fpga</a></li>
			<li><a href="http://inisyn.org/src/xup/">XUP</a> by inisyn research, opensource JTAG programming for Spartan 3E starter kit USB cable</li>
			<li><a href="http://www.ixo.de/info/usb_jtag/">USB JTAG adapter</a> by Kolja Waschk, opensource integration of the XILINX platform cable USB into OpenOCD and openwince JTAG Tools</li>
		</ul>
		<HR>
		<FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.4 2007-04-06 13:08:27 michael Exp $</I></FONT>
	</BODY>
</HTML>
Commit	Line	Data
026cbe49	1	<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
	2	<HTML>
	3	<HEAD>
	4	<TITLE>XILINX USB/Parallel JTAG cables on Linux without windrvr</TITLE>
	5	</HEAD>
	6	<BODY BGCOLOR="#FFFFFF" TEXT="#000000">
	7	<H1>XILINX JTAG tools on Linux without proprietary kernel modules</H1>
	8	<H2>About</H2>
	9	<P>
	10	When using <a href="http://www.xilinx.com">XILINX</a> JTAG software like Impact, Chipscope and XMD
	11	on Linux, the proprietary kernel <i>windrvr</i> module from <a href="http://www.jungo.com">Jungo</a>
	12	is needed to access the parallel- or usb-cable.
	13	As this module does not work with current linux kernel versions (> 2.6.18) a library was developed,
	14	which emulates the module in userspace and allows the tools to access the JTAG cable without the need
	15	for a proprietary kernel module.
	16	</P>
	17	<P>
	18	The library uses <a href="http://libusb.sourceforge.net/">libusb</a> to access USB devices and the
	19	<a href="http://www.linuxfocus.org/common/src/article205/ppdev.html">ppdev</a> interface to communicate
	20	with parallel cables. The parallel part currently only supports Parallel Cable III mode (and PCIV in
	21	PCIII compatibility mode) as the faster PCIV modes use another kernel module which is not emulated by
	22	this library. So you are limited to a 200kHz JTAG clock when using Parallel Cable IV with this software.
	23	The USB cable is supported at full speed.
	24	</P>
	25	<P>
	26	The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
	27	extended to also support parallel cables.
	28	</P>
	29	<H2>Supported Cables</H2>
	30	The following cables are reported to work with this driver:
	31	<ul>
	32	<li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9LP</a></li>
	33	<li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>
	34	<li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>
	35	<li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
	36	<li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
9ec5ba04	37	<li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&Nav2=Cables&Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
026cbe49	38	</ul>
	39	<H2>Supported Software</H2>
	40	The following software is reported to work with this driver:
	41	<ul>
	42	<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1SP3</a></li>
	43	<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1SP2</a></li>
	44	<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1SP1</a></li>
	45	<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 8.2SP3</a></li>
	46	<li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 8.1SP3</a></li>
	47	<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.03i</a></li>
	48	<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.02i</a></li>
	49	<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 8.2.04i</a></li>
	50	<li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.2.02i</a></li>
	51	</ul>
	52	<H2>Download</H2>
	53	<ul>
41d0a9f7	54	<li>Download <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver.tar.gz">usb-driver.tar.gz</a> (to build it, you need to have the libusb development package installed. It is called libusb-dev on Debian.)</li>
026cbe49	55	<li>Read the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/checkout/usb-driver/README">README</a></li>
026cbe49	56	<li>Browse the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/">CVS repository</a></li>
9ec5ba04	57	<li>Precompiled <a href="libusb-driver.so">libusb-driver.so</a> for Debian Etch, but better build your own</li>
41d0a9f7	58	</ul>
	59	<H2>Links</H2>
	60	<ul>
9ec5ba04	61	<li><a href="http://groups.google.com/group/comp.arch.fpga/msg/2dfa36541174a4f2">Ubuntu installation instructions by Luzerne</a></li>
41d0a9f7	62	<li><a href="http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/03/msg00101.html">Ubuntu installation instructions by Paul-Armand Verhaegen</a></li>
9ec5ba04	63	<li><a href="http://groups.google.com/group/comp.arch.fpga/browse_frm/thread/f149e5b6028e2c70">Initial announcement on comp.arch.fpga</a></li>
57d4107e	64	<li><a href="http://inisyn.org/src/xup/">XUP</a> by inisyn research, opensource JTAG programming for Spartan 3E starter kit USB cable</li>
57d4107e	65	<li><a href="http://www.ixo.de/info/usb_jtag/">USB JTAG adapter</a> by Kolja Waschk, opensource integration of the XILINX platform cable USB into OpenOCD and openwince JTAG Tools</li>
026cbe49	66	</ul>
026cbe49	67	<HR>
57d4107e	68	<FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.4 2007-04-06 13:08:27 michael Exp $</I></FONT>
026cbe49	69	</BODY>
026cbe49	70	</HTML>