Add support for different interfaces on FTDI chips.

[usb-driver] / index.html

diff --git a/index.html b/index.html
index d54f356830022673a084c6ad56adf97dd2b98def..35610d6f9c61154c5d3f86980ac20bf86ad8d0b2 100644 (file)
--- a/index.html
+++ b/index.html
@@ -30,27 +30,48 @@
                The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
                extended to also support parallel cables.
                </P>
                The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
                extended to also support parallel cables.
                </P>

-               <P><B>News</B> (<I>2008-03-26</I>): Xilinx has released their own drivers based on libusb with ISE Design Suite 10.1.
-               To use them, you need to set the environment-variable <kbd>XIL_IMPACT_USE_LIBUSB</kbd> to <kbd>1</kbd>
-               before running the tools. The driver on this page no longer needs to be preloaded if you only used
-               it to access USB cables. Parallel port support still seems to rely on <i>windrvr</i>, which can be
-               emulated by <i>libusb-driver</i>.</P>
-               <P><B>Using 32-bit ISE 10.1 on a 64-bit platform:</B> When using the 32-bit JTAG tools from ISE Design
-               Suite 10.1 on a 64-bit machine, the tools will not connect to the cable but output the following
-               error: <I>Cable operation is not supported when running the 32-bit version of the application on a
-               64-bit platform.</I>
-               To fix this, run the tools with <KBD>linux32</KBD> or preload the newest 32-bit version of
-               <i>libusb-driver</i>. This will lead the tools to believe that they are running on a 32-bit
-               platform and allows them to connect to the cable.
+               <P><B>News</B>
+               <UL>
+                       <LI><P><I>2008-03-26</I>: Xilinx has released their own drivers based on libusb with ISE Design Suite 10.1.
+                       To use them, you need to set the environment-variable <kbd>XIL_IMPACT_USE_LIBUSB</kbd> to <kbd>1</kbd>
+                       before running the tools. The driver on this page no longer needs to be preloaded if you only used
+                       it to access USB cables. Parallel port support still seems to rely on <i>windrvr</i>, which can be
+                       emulated by <i>libusb-driver</i>.</P>
+                       <P><B>Using 32-bit ISE 10.1 on a 64-bit platform:</B> When using the 32-bit JTAG tools from ISE Design
+                       Suite 10.1 on a 64-bit machine, the tools will not connect to the cable but output the following
+                       error: <I>Cable operation is not supported when running the 32-bit version of the application on a
+                       64-bit platform.</I>
+                       To fix this, run the tools with <KBD>linux32</KBD> or preload the newest 32-bit version of
+                       <i>libusb-driver</i>. This will lead the tools to believe that they are running on a 32-bit
+                       platform and allows them to connect to the cable.</P></LI>
+
+                       <LI><P><I>2009-05-31</I>: ISE Design Suite 11.1 now uses Xilinx's libusb-based drivers as default, without
+                       the need to set <kbd>XIL_IMPACT_USE_LIBUSB</kbd>. If you want to use this driver with ISE 11.1 for USB
+                       cables and disable the builtin support for libusb, you now have to set <kbd>XIL_IMPACT_USE_LIBUSB</kbd>
+                       to <kbd>0</kbd> (<kbd>export XIL_IMPACT_USE_LIBUSB=0</kbd> or <kbd>setenv XIL_IMPACT_USE_LIBUSB 0</kbd>).
+                       For parallel cables Xilinx still relies on <i>windrvr</i>. This library works fine with parallel cables and
+                       ISE 11.1 with no need for <i>windrvr</i>.</P></LI>
+
+                       <LI><P><I>2010-03-15</I>: If you are using newer udev-versions (like the version included in Debian Squeeze
+                       and Ubuntu 9.10), then the file <i>/etc/udev/rules.d/xusbdfwu.rules</i> is incompatible with this udev
+                       version. The effect of this is that the cable-firmware gets never loaded and the cable led never lights up.</P>
+                       <P>To fix this, run the following command as root:<BR>
+                       <kbd>sed -i -e 's/TEMPNODE/tempnode/' -e 's/SYSFS/ATTRS/g' -e 's/BUS/SUBSYSTEMS/' /etc/udev/rules.d/xusbdfwu.rules</kbd><BR>
+                       You may have to reboot for this change to take effect.</P></LI>
+
+                       <LI><P><I>2010-05-22</I>: Support for ISE 12 is now available in the driver.</P></LI>
+               </UL>

                </P>
                <H2>Supported Cables</H2>
                The following cables are reported to work with this driver:
                <ul>
                </P>
                <H2>Supported Cables</H2>
                The following cables are reported to work with this driver:
                <ul>

+                       <li><a href="http://www.xilinx.com/support/documentation/data_sheets/ds593.pdf">XILINX Platform Cable USB II</a></li>

                        <li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9, DLC9LP and DLC9G</a></li>
                        <li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>
                        <li><a href="http://www.xilinx.com/s3astarter">Integrated Platform Cable USB on Spartan 3A starter kit</a></li>
                        <li><a href="http://www.digilentinc.com/Products/Detail.cfm?Nav1=Products&Nav2=Programmable&Prod=XUPV2P">Integrated Platform Cable USB on XUP-V2Pro</a></li>
                        <li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">XILINX Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>
                        <li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9, DLC9LP and DLC9G</a></li>
                        <li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>
                        <li><a href="http://www.xilinx.com/s3astarter">Integrated Platform Cable USB on Spartan 3A starter kit</a></li>
                        <li><a href="http://www.digilentinc.com/Products/Detail.cfm?Nav1=Products&Nav2=Programmable&Prod=XUPV2P">Integrated Platform Cable USB on XUP-V2Pro</a></li>
                        <li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">XILINX Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>

+                       <li>FCPU-X platform cable (XILINX Platform Cable USB clone)</li>

                        <li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
                        <li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
                        <li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&amp;Nav2=Cables&amp;Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
                        <li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
                        <li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
                        <li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&amp;Nav2=Cables&amp;Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>


@@ -65,6 +86,8 @@
                <H2>Supported Software</H2>
                The following software is reported to work with this driver:
                <ul>
                <H2>Supported Software</H2>
                The following software is reported to work with this driver:
                <ul>

+                       <li><a href="http://www.xilinx.com/tools/designtools.htm">ISE 12</a> (all editions)</li>
+                       <li><a href="http://www.xilinx.com/tools/designtools.htm">ISE 11</a> (all editions)</li>

                        <li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 10.1</a></li>
                        <li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.2 SP1, SP2, SP3 and SP4</a></li>
                        <li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1 SP1, SP2 and SP3</a></li>
                        <li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 10.1</a></li>
                        <li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.2 SP1, SP2, SP3 and SP4</a></li>
                        <li><a href="http://www.xilinx.com/ise/logic_design_prod/webpack.htm">ISE Webpack 9.1 SP1, SP2 and SP3</a></li>