add EDK 9.1.01i as working

[usb-driver] / index.html

diff --git a/index.html b/index.html
index 148be322c174f13b8f592823c99967c925fe4599..b2628cdd51324d4526e54e7da5904f4507cd02e0 100644 (file)
--- a/index.html
+++ b/index.html
@@ -8,7 +8,7 @@
                <H2>About</H2>
                <P>
                When using <a href="http://www.xilinx.com">XILINX</a> JTAG software like Impact, Chipscope and XMD
                <H2>About</H2>
                <P>
                When using <a href="http://www.xilinx.com">XILINX</a> JTAG software like Impact, Chipscope and XMD

-               on Linux, the proprietary kernel <i>windrvr</i> module from <a href="http://www.jungo.com">Jungo</a>
+               on Linux, the proprietary kernel module <i>windrvr</i> from <a href="http://www.jungo.com">Jungo</a>

                is needed to access the parallel- or usb-cable.
                As this module does not work with current linux kernel versions (&gt; 2.6.18) a library was developed,
                which emulates the module in userspace and allows the tools to access the JTAG cable without the need
                is needed to access the parallel- or usb-cable.
                As this module does not work with current linux kernel versions (&gt; 2.6.18) a library was developed,
                which emulates the module in userspace and allows the tools to access the JTAG cable without the need


@@ -16,13 +16,17 @@
                </P>
                <P>
                The library uses <a href="http://libusb.sourceforge.net/">libusb</a> to access USB devices and the
                </P>
                <P>
                The library uses <a href="http://libusb.sourceforge.net/">libusb</a> to access USB devices and the

-               <a href="http://www.linuxfocus.org/common/src/article205/ppdev.html">ppdev</a> interface to communicate
+               <a href="http://people.redhat.com/twaugh/parport/html/x623.html">ppdev</a> interface to communicate

                with parallel cables. The parallel part currently only supports Parallel Cable III mode (and PCIV in
                PCIII compatibility mode) as the faster PCIV modes use another kernel module which is not emulated by
                this library. So you are limited to a 200kHz JTAG clock when using Parallel Cable IV with this software.
                The USB cable is supported at full speed.
                </P>
                <P>
                with parallel cables. The parallel part currently only supports Parallel Cable III mode (and PCIV in
                PCIII compatibility mode) as the faster PCIV modes use another kernel module which is not emulated by
                this library. So you are limited to a 200kHz JTAG clock when using Parallel Cable IV with this software.
                The USB cable is supported at full speed.
                </P>
                <P>

+               Experimental support for FTDI 2232 based devices has been added. They are seen by Impact as a Parallel
+               Cable III. These devices are currently significantly slower than every other supported cable.
+               </P>
+               <P>

                The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
                extended to also support parallel cables.
                </P>
                The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
                extended to also support parallel cables.
                </P>


@@ -31,10 +35,19 @@
                <ul>
                        <li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9LP</a></li>
                        <li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>
                <ul>
                        <li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9LP</a></li>
                        <li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>

-                       <li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>
+                       <li><a href="http://www.xilinx.com/s3astarter">Integrated Platform Cable USB on Spartan 3A starter kit</a></li>
+                       <li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">XILINX Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>

                        <li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
                        <li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
                        <li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
                        <li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>

-                       <li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&Nav2=Cables&Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
+                       <li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&amp;Nav2=Cables&amp;Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
+                       <li><a href="http://www.amontec.com/">Amontec JTAGkey-Tiny</a> (experimental)</li>
+               </ul>
+               These cables should work but have not yet been tested:
+               <ul>
+                       <li>XILINX Platform Cable USB DLC9 and DLC9G</li>
+                       <li>Integrated Platform Cable USB on other development boards</li>
+                       <li>other Parallel Cable III clones</li>
+                       <li>other FTDI2232 based devices which use the chips standard JTAG pinout (experimental)</li>

                </ul>
                <H2>Supported Software</H2>
                The following software is reported to work with this driver:
                </ul>
                <H2>Supported Software</H2>
                The following software is reported to work with this driver:


@@ -47,21 +60,28 @@
                        <li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.03i</a></li>
                        <li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.02i</a></li>
                        <li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 8.2.04i</a></li>
                        <li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.03i</a></li>
                        <li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.02i</a></li>
                        <li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 8.2.04i</a></li>

+                       <li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 9.1.01i</a></li>

                        <li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.2.02i</a></li>
                        <li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.2.02i</a></li>

+                       <li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.1.02i</a></li>

                </ul>
                <H2>Download</H2>
                <ul>
                </ul>
                <H2>Download</H2>
                <ul>

-                       <li>Download <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver.tar.gz">usb-driver.tar.gz</a> (to build it, you need to have the libusb development package installed. It is called libusb-dev on Debian.)</li>
-                       <li>Read the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/*checkout*/usb-driver/README">README</a></li>
-                       <li>Browse the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/">CVS repository</a></li>
-                       <li>Precompiled <a href="libusb-driver.so">libusb-driver.so</a> for Debian Etch, but better build your own</a></li>
+                       <li>Download <a href="http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver?a=snapshot;h=HEAD">usb-driver-HEAD.tar.gz</a> (to build it, you need to have the libusb development package installed. It is called libusb-dev on Debian.)</li>
+                       <li>Read the <a href="http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver?a=blob_plain;f=README;hb=HEAD">README</a></li>
+                       <li>Browse the <a href="http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver?a=tree">Git repository</a> (<a href="http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver">Summary</a>)</li>
+                       <li>Precompiled <a href="libusb-driver.so">libusb-driver.so</a> for Debian Etch, but better build your own</li>
+                       <li>Clone the <a href="http://git.or.cz/">Git</a> repository with: <kbd>git clone git://git.zerfleddert.de/usb-driver</kbd></li>

                </ul>
                <H2>Links</H2>
                <ul>
                </ul>
                <H2>Links</H2>
                <ul>

-                       <li><a href="http://groups.google.de/group/comp.arch.fpga/msg/2dfa36541174a4f2">Ubuntu installation instructions by Luzerne</a></li>
+                       <li><a href="http://groups.google.com/group/comp.arch.fpga/msg/2dfa36541174a4f2">Ubuntu installation instructions by Luzerne</a></li>

                        <li><a href="http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/03/msg00101.html">Ubuntu installation instructions by Paul-Armand Verhaegen</a></li>
                        <li><a href="http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2007/03/msg00101.html">Ubuntu installation instructions by Paul-Armand Verhaegen</a></li>

+                       <li><a href="http://groups.google.com/group/comp.arch.fpga/browse_frm/thread/f149e5b6028e2c70">Initial announcement on comp.arch.fpga</a></li>
+                       <li><a href="http://inisyn.org/src/xup/">XUP</a> by inisyn research, opensource JTAG programming for Spartan 3E starter kit USB cable</li>
+                       <li><a href="http://www.ixo.de/info/usb_jtag/">USB JTAG adapter</a> by Kolja Waschk, opensource integration of the XILINX platform cable USB into OpenOCD and openwince JTAG Tools</li>
+                       <li><a href="http://www.rogerstech.co.uk/xc3sprog/">Spartan3 JTAG download tools for GNU/Linux (xc3sprog)</a></li>

                </ul>
                <HR>
                </ul>
                <HR>

-               <FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.2 2007-04-06 12:32:26 michael Exp $</I></FONT>
+               <FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A></I></FONT>

        </BODY>
 </HTML>
        </BODY>
 </HTML>