X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver/blobdiff_plain/4d2daea0fa9e761d34a191c4404c970722e893d9..0a060ead2d6293cc1e4227918d52258b71f9e716:/index.html

diff --git a/index.html b/index.html
index 9786a28..0d82a81 100644
--- a/index.html
+++ b/index.html
@@ -8,7 +8,7 @@
 		<H2>About</H2>
 		<P>
 		When using <a href="http://www.xilinx.com">XILINX</a> JTAG software like Impact, Chipscope and XMD
-		on Linux, the proprietary kernel <i>windrvr</i> module from <a href="http://www.jungo.com">Jungo</a>
+		on Linux, the proprietary kernel module <i>windrvr</i> from <a href="http://www.jungo.com">Jungo</a>
 		is needed to access the parallel- or usb-cable.
 		As this module does not work with current linux kernel versions (&gt; 2.6.18) a library was developed,
 		which emulates the module in userspace and allows the tools to access the JTAG cable without the need
@@ -23,6 +23,10 @@
 		The USB cable is supported at full speed.
 		</P>
 		<P>
+		Experimental support for FTDI 2232 based devices has been added. They are seen by Impact as a Parallel
+		Cable III. These devices are currently significantly slower than every other supported cable.
+		</P>
+		<P>
 		The library is called <i>libusb-driver</i> as it was developed to support the USB cable, but later
 		extended to also support parallel cables.
 		</P>
@@ -31,10 +35,19 @@
 		<ul>
 			<li><a href="http://direct.xilinx.com/bvdocs/publications/ds300.pdf">XILINX Platform Cable USB DLC9LP</a></li>
 			<li><a href="http://www.xilinx.com/s3estarter">Integrated Platform Cable USB on Spartan 3E starter kit</a></li>
+			<li><a href="http://www.xilinx.com/s3astarter">Integrated Platform Cable USB on Spartan 3A starter kit</a></li>
 			<li><a href="http://direct.xilinx.com/bvdocs/publications/ds097.pdf">XILINX Parallel Cable IV</a> (in Parallel Cable III compatibility mode)</li>
 			<li><a href="http://www.enterpoint.co.uk/">Enterpoint Prog2</a> Parallel Cable III clone</li>
 			<li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
 			<li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&amp;Nav2=Cables&amp;Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
+			<li><a href="http://www.amontec.com/">Amontec JTAGkey-Tiny</a> (experimental)</li>
+		</ul>
+		These cables should work but have not yet been tested:
+		<ul>
+			<li>XILINX Platform Cable USB DLC9 and DLC9G</li>
+			<li>Integrated Platform Cable USB on other development boards</li>
+			<li>other Parallel Cable III clones</li>
+			<li>other FTDI2232 based devices which use the chips standard JTAG pinout (experimental)</li>
 		</ul>
 		<H2>Supported Software</H2>
 		The following software is reported to work with this driver:
@@ -48,12 +61,13 @@
 			<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 9.1.02i</a></li>
 			<li><a href="http://www.xilinx.com/ise/optional_prod/cspro.htm">ChipScope Pro 8.2.04i</a></li>
 			<li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.2.02i</a></li>
+			<li><a href="http://www.xilinx.com/ise/embedded_design_prod/platform_studio.htm">EDK 8.1.02i</a></li>
 		</ul>
 		<H2>Download</H2>
 		<ul>
-			<li>Download <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver.tar.gz">usb-driver.tar.gz</a> (to build it, you need to have the libusb development package installed. It is called libusb-dev on Debian.)</li>
-			<li>Read the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/*checkout*/usb-driver/README">README</a></li>
-			<li>Browse the <a href="http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/">CVS repository</a></li>
+			<li>Download <a href="http://cvs.zerfleddert.de/cgi-bin/viewvc.cgi/usb-driver.tar.gz">usb-driver.tar.gz</a> (to build it, you need to have the libusb development package installed. It is called libusb-dev on Debian.)</li>
+			<li>Read the <a href="http://cvs.zerfleddert.de/cgi-bin/viewvc.cgi/*checkout*/usb-driver/README">README</a></li>
+			<li>Browse the <a href="http://cvs.zerfleddert.de/cgi-bin/viewvc.cgi/usb-driver/">CVS repository</a></li>
 			<li>Precompiled <a href="libusb-driver.so">libusb-driver.so</a> for Debian Etch, but better build your own</li>
 		</ul>
 		<H2>Links</H2>
@@ -63,8 +77,9 @@
 			<li><a href="http://groups.google.com/group/comp.arch.fpga/browse_frm/thread/f149e5b6028e2c70">Initial announcement on comp.arch.fpga</a></li>
 			<li><a href="http://inisyn.org/src/xup/">XUP</a> by inisyn research, opensource JTAG programming for Spartan 3E starter kit USB cable</li>
 			<li><a href="http://www.ixo.de/info/usb_jtag/">USB JTAG adapter</a> by Kolja Waschk, opensource integration of the XILINX platform cable USB into OpenOCD and openwince JTAG Tools</li>
+			<li><a href="http://www.rogerstech.co.uk/xc3sprog/">Spartan3 JTAG download tools for GNU/Linux (xc3sprog)</a></li>
 		</ul>
 		<HR>
-		<FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.6 2007-04-07 15:36:55 michael Exp $</I></FONT>
+		<FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.13 2007-05-01 12:03:15 michael Exp $</I></FONT>
 	</BODY>
 </HTML>