X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver/blobdiff_plain/7606d470883f796049a23df206b18f0477622790..69a88eebabe1446c9f4f1178304b3fb58b343483:/README?ds=sidebyside

diff --git a/README b/README
index d0eeb65..23265b8 100644
--- a/README
+++ b/README
@@ -17,6 +17,8 @@ the following software:
  * ChipScope 9.1.03i
  * ChipScope 9.1.02i
  * ChipScope 8.2.04i
+ * EDK 9.1.02i
+ * EDK 9.1.01i
  * EDK 8.2.02i
  * EDK 8.1.02i
 
@@ -24,7 +26,8 @@ In addition to the XILINX USB and parallel cables, devices based on the FTDI
 2232 serial converter chip are also experimentally supported. This includes
 devices like the Amontec JTAGkey(-Tiny).
 
-Build the library by calling `make'.
+Build the library by calling `make'. If you are on a 64 bit system but want
+to build a 32 bit library, run `make lib32' instead.
 
 To use this library you have to preload the library before starting impact:
 
@@ -35,11 +38,14 @@ $ setenv LD_PRELOAD /path/to/libusb-driver.so  (for csh shells)
 $ impact
 
 The source for this library can be found at:
-http://cvs.zerfleddert.de/cgi-bin/viewcvs.cgi/usb-driver/
+http://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver
 
 The main website is located at:
 http://www.rmdir.de/~michael/xilinx/
 
+The Git repository can be cloned with:
+git clone git://git.zerfleddert.de/usb-driver
+
 
 Notes for the USB cable
 =======================
@@ -115,14 +121,14 @@ To set-up the device:
                           ~~~~~~~~~
 
 2. Copy the sample libusb-driverrc to ~/.libusb-driverrc, edit it and replace
-   the vendor and product-id in the example file with the values from provided
-   in the lsusb-output. You can also change the 'parallel port' which is mapped
-   to this cable. Impact sees the device at that port as a Parallel Cable III.
+   the vendor and product-id in the example file with the values provided in
+   the lsusb-output. You can also change the 'parallel port' which is mapped to
+   this cable. Impact sees the device at that port as a Parallel Cable III.
 
 3. To use the device as an ordinary user, put the following line in a new file
    in /etc/udev/rules.d/ and restart udev:
    ACTION=="add", BUS=="usb", SYSFS{idVendor}=="0403", SYSFS{idProduct}=="cff8", MODE="666"
    (replace the vendor and product id with your values)
 
-The support for FTDI 2232 based devices is currently experimental and they are
-currently significantly slowen than the other supported cables.
+The support for FTDI 2232 based devices is experimental and they are currently
+significantly slower than the other supported cables.