From: Michael Gernoth <michael@gernoth.net>
Date: Sun, 8 May 2011 18:20:19 +0000 (+0200)
Subject: Add setup script for USB cable which works on modern distributions
X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver/commitdiff_plain/36f8b271f2d5a1fa3b5bd5f33bfb4d7c017e2ced?ds=inline

Add setup script for USB cable which works on modern distributions

This completely rewritten version of setup_pcusb works on modern
distributions with newer udev versions which have a different
rules-format and are not detected by the xilinx-version of the
script. It only has the name in common with the xilinx-version.
---

diff --git a/README b/README
index 6bf1097..802ca78 100644
--- a/README
+++ b/README
@@ -66,6 +66,15 @@ the initial firmware has not been loaded (loading it changes the
 product-ID from another value to 8). To load the firmware follow
 these steps:
 
+1. Run ./setup_pcusb in this directory, this should set up everything
+   correctly:
+   - When $XILINX is set correctly:
+     $ ./setup_pcusb
+   - When $XILINX is not set, and ISE is installed in /opt/Xilinx/13.1:
+     $ ./setup_pcusb /opt/Xilinx/13.1/ISE_DS/ISE
+
+Old instructions, use only when the above script did not work:
+
 1. If you have no /etc/udev/rules.d/xusbdfwu.rules file, copy it from
    /path/to/ISE/bin/lin/xusbdfwu.rules to /etc/udev/rules.d/xusbdfwu.rules
 
diff --git a/setup_pcusb b/setup_pcusb
new file mode 100755
index 0000000..dfa72f7
--- /dev/null
+++ b/setup_pcusb
@@ -0,0 +1,45 @@
+#!/bin/bash
+
+if [ "${XILINX}" = "" ]; then
+	if [ "${1}" = "" ]; then
+		echo "Syntax: ${0} /path/to/ISE"
+		exit 1
+	fi
+	root="${1}"
+else
+	root="${XILINX}"
+fi
+
+if [ "`id -u`" != "0" ]; then
+	echo "You are not root, trying sudo..."
+	ASROOT="sudo"
+else
+	ASROOT=""
+fi
+
+echo -n "Looking for USB cable files: "
+
+dir=""
+
+for check in "${root}/bin/lin64" "${root}/bin/lin"; do
+	if [ -e "${check}/xusbdfwu.rules" ]; then
+		dir="${check}"
+		break;
+	fi
+done
+
+if [ "${dir}" != "" ]; then
+	echo "${dir}"
+else
+	echo "NOT FOUND!"
+	exit 1
+fi
+
+echo "Copying formware to /usr/share:"
+for fw in "${dir}/"xusb*.hex; do
+	$ASROOT cp -v "${fw}" "/usr/share/"
+done
+
+echo "Installing udev rules:"
+$ASROOT bash -c "sed -e 's/TEMPNODE/tempnode/' -e 's/SYSFS/ATTRS/g' -e 's/BUS/SUBSYSTEMS/' \"${dir}/xusbdfwu.rules\" >/etc/udev/rules.d/xusbdfwu.rules"
+echo "done"