From: Michael Gernoth Date: Sun, 8 May 2011 18:20:19 +0000 (+0200) Subject: Add setup script for USB cable which works on modern distributions X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver/commitdiff_plain/36f8b271f2d5a1fa3b5bd5f33bfb4d7c017e2ced?hp=7c932f66e13171aece712ea8bb018bee3252b7ad Add setup script for USB cable which works on modern distributions This completely rewritten version of setup_pcusb works on modern distributions with newer udev versions which have a different rules-format and are not detected by the xilinx-version of the script. It only has the name in common with the xilinx-version. --- diff --git a/README b/README index 6bf1097..802ca78 100644 --- a/README +++ b/README @@ -66,6 +66,15 @@ the initial firmware has not been loaded (loading it changes the product-ID from another value to 8). To load the firmware follow these steps: +1. Run ./setup_pcusb in this directory, this should set up everything + correctly: + - When $XILINX is set correctly: + $ ./setup_pcusb + - When $XILINX is not set, and ISE is installed in /opt/Xilinx/13.1: + $ ./setup_pcusb /opt/Xilinx/13.1/ISE_DS/ISE + +Old instructions, use only when the above script did not work: + 1. If you have no /etc/udev/rules.d/xusbdfwu.rules file, copy it from /path/to/ISE/bin/lin/xusbdfwu.rules to /etc/udev/rules.d/xusbdfwu.rules diff --git a/setup_pcusb b/setup_pcusb new file mode 100755 index 0000000..dfa72f7 --- /dev/null +++ b/setup_pcusb @@ -0,0 +1,45 @@ +#!/bin/bash + +if [ "${XILINX}" = "" ]; then + if [ "${1}" = "" ]; then + echo "Syntax: ${0} /path/to/ISE" + exit 1 + fi + root="${1}" +else + root="${XILINX}" +fi + +if [ "`id -u`" != "0" ]; then + echo "You are not root, trying sudo..." + ASROOT="sudo" +else + ASROOT="" +fi + +echo -n "Looking for USB cable files: " + +dir="" + +for check in "${root}/bin/lin64" "${root}/bin/lin"; do + if [ -e "${check}/xusbdfwu.rules" ]; then + dir="${check}" + break; + fi +done + +if [ "${dir}" != "" ]; then + echo "${dir}" +else + echo "NOT FOUND!" + exit 1 +fi + +echo "Copying formware to /usr/share:" +for fw in "${dir}/"xusb*.hex; do + $ASROOT cp -v "${fw}" "/usr/share/" +done + +echo "Installing udev rules:" +$ASROOT bash -c "sed -e 's/TEMPNODE/tempnode/' -e 's/SYSFS/ATTRS/g' -e 's/BUS/SUBSYSTEMS/' \"${dir}/xusbdfwu.rules\" >/etc/udev/rules.d/xusbdfwu.rules" +echo "done"