From: michael Date: Sun, 4 Mar 2007 20:41:24 +0000 (+0000) Subject: firmware info X-Git-Url: https://git.zerfleddert.de/cgi-bin/gitweb.cgi/usb-driver/commitdiff_plain/979132fe596c8eed91e177e23a37546291e02acb firmware info --- diff --git a/README b/README index 7f000c8..aa2eab6 100644 --- a/README +++ b/README @@ -19,3 +19,26 @@ $ impact To use the device as ordinary user, put the following line in a new file in /etc/udev/rules.d/ and restart udev: ACTION=="add", BUS=="usb", SYSFS{idVendor}=="03fd", MODE="666" + + +If your cable does not have the ID 03fd:0008 in the output of lsusb, +the initial firmware has not been loaded (loading it changes the +product-ID from another value to 8). To load the firmware follow +these steps: + +1. If you have no /etc/udev/rules.d/xusbdfwu.rules file, create one with the + following content: +# version 0001 +SYSFS{idVendor}=="03fd", SYSFS{idProduct}=="0008", NAME="windrvr6" +BUS=="usb", ACTION=="add", SYSFS{idVendor}=="03fd", SYSFS{idProduct}=="0007", RUN+="/sbin/fxload -v -t fx2 -I /usr/share/xusbdfwu.hex -D $TEMPNODE" +BUS=="usb", ACTION=="add", SYSFS{idVendor}=="03fd", SYSFS{idProduct}=="0009", RUN+="/sbin/fxload -v -t fx2 -I /usr/share/xusbdfwu.hex -D $TEMPNODE" +BUS=="usb", ACTION=="add", SYSFS{idVendor}=="03fd", SYSFS{idProduct}=="000b", RUN+="/sbin/fxload -v -t fx2 -I /usr/share/xusbdfwu.hex -D $TEMPNODE" +BUS=="usb", ACTION=="add", SYSFS{idVendor}=="03fd", SYSFS{idProduct}=="000d", RUN+="/sbin/fxload -v -t fx2 -I /usr/share/xusbdfwu.hex -D $TEMPNODE" +BUS=="usb", ACTION=="add", SYSFS{idVendor}=="03fd", SYSFS{idProduct}=="000f", RUN+="/sbin/fxload -v -t fx2 -I /usr/share/xusbdfwu.hex -D $TEMPNODE" + +2. Install the package containing /sbin/fxload from your linux distribution. + It is usually called "fxload" + +3. copy the file /path/to/ISE/bin/lin/xusbdfwu.hex to /usr/share/xusbdfwu.hex + +4. restart udev and re-plug the cable