]> git.zerfleddert.de Git - proxmark3-svn/blob - client/lualibs/commands.lua
Merge remote-tracking branch 'upstream/master'
[proxmark3-svn] / client / lualibs / commands.lua
1 --[[
2 These are command definitions. This file should correspond exactly to usb_cmd.h.
3 --]]
4 --// For the bootloader
5 local _commands = {
6 CMD_DEVICE_INFO = 0x0000,
7 CMD_SETUP_WRITE = 0x0001,
8 CMD_FINISH_WRITE = 0x0003,
9 CMD_HARDWARE_RESET = 0x0004,
10 CMD_START_FLASH = 0x0005,
11 CMD_NACK = 0x00fe,
12 CMD_ACK = 0x00ff,
13
14 --// For general mucking around
15 CMD_DEBUG_PRINT_STRING = 0x0100,
16 CMD_DEBUG_PRINT_INTEGERS = 0x0101,
17 CMD_DEBUG_PRINT_BYTES = 0x0102,
18 CMD_LCD_RESET = 0x0103,
19 CMD_LCD = 0x0104,
20 CMD_BUFF_CLEAR = 0x0105,
21 CMD_READ_MEM = 0x0106,
22 CMD_VERSION = 0x0107,
23 CMD_STATUS = 0x0108,
24 CMD_PING = 0x0109,
25 --// For low-frequency tags
26 CMD_READ_TI_TYPE = 0x0202,
27 CMD_WRITE_TI_TYPE = 0x0203,
28 CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204,
29 CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205,
30 CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206,
31 CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207,
32 CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208,
33 CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209,
34 CMD_SIMULATE_TAG_125K = 0x020A,
35 CMD_HID_DEMOD_FSK = 0x020B,
36 CMD_HID_SIM_TAG = 0x020C,
37 CMD_SET_LF_DIVISOR = 0x020D,
38 CMD_LF_SIMULATE_BIDIR = 0x020E,
39 CMD_SET_ADC_MUX = 0x020F,
40 CMD_HID_CLONE_TAG = 0x0210,
41 CMD_EM410X_WRITE_TAG = 0x0211,
42 CMD_INDALA_CLONE_TAG = 0x0212,
43 --// for 224 bits UID
44 CMD_INDALA_CLONE_TAG_L = 0x0213,
45 CMD_T55XX_READ_BLOCK = 0x0214,
46 CMD_T55XX_WRITE_BLOCK = 0x0215,
47 CMD_T55XX_RESET_READ = 0x0216,
48 CMD_PCF7931_READ = 0x0217,
49 CMD_EM4X_READ_WORD = 0x0218,
50 CMD_EM4X_WRITE_WORD = 0x0219,
51 CMD_IO_DEMOD_FSK = 0x021A,
52 CMD_IO_CLONE_TAG = 0x021B,
53 CMD_EM410X_DEMOD = 0x021c,
54 CMD_SET_LF_SAMPLING_CONFIG = 0x021d,
55 CMD_FSK_SIM_TAG = 0x021E,
56 CMD_ASK_SIM_TAG = 0x021F,
57 CMD_PSK_SIM_TAG = 0x0220,
58 CMD_AWID_DEMOD_FSK = 0x0221,
59 CMD_VIKING_CLONE_TAG = 0x0223,
60 CMD_T55XX_WAKEUP = 0x0224,
61 --/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
62
63 --// For the 13.56 MHz tags
64 CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300,
65 CMD_READ_SRI512_TAG = 0x0303,
66 CMD_READ_SRIX4K_TAG = 0x0304,
67 CMD_READER_ISO_15693 = 0x0310,
68 CMD_SIMTAG_ISO_15693 = 0x0311,
69 CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312,
70 CMD_ISO_15693_COMMAND = 0x0313,
71 CMD_ISO_15693_COMMAND_DONE = 0x0314,
72 CMD_ISO_15693_FIND_AFI = 0x0315,
73 CMD_ISO_15693_DEBUG = 0x0316,
74 CMD_LF_SNOOP_RAW_ADC_SAMPLES = 0x0317,
75
76 --// For Hitag2 transponders
77 CMD_SNOOP_HITAG = 0x0370,
78 CMD_SIMULATE_HITAG = 0x0371,
79 CMD_READER_HITAG = 0x0372,
80
81 CMD_SIMULATE_TAG_ISO_14443B = 0x0381,
82 CMD_SNOOP_ISO_14443B = 0x0382,
83 CMD_SNOOP_ISO_14443a = 0x0383,
84 CMD_SIMULATE_TAG_ISO_14443a = 0x0384,
85 CMD_READER_ISO_14443a = 0x0385,
86 CMD_SIMULATE_TAG_LEGIC_RF = 0x0387,
87 CMD_READER_LEGIC_RF = 0x0388,
88 CMD_WRITER_LEGIC_RF = 0x0389,
89 CMD_EPA_PACE_COLLECT_NONCE = 0x038A,
90 --//CMD_EPA_ = 0x038B,
91
92 CMD_ICLASS_READCHECK = 0x038F,
93 CMD_ICLASS_CLONE = 0x0390,
94 CMD_ICLASS_DUMP = 0x0391,
95 CMD_SNOOP_ICLASS = 0x0392,
96 CMD_SIMULATE_TAG_ICLASS = 0x0393,
97 CMD_READER_ICLASS = 0x0394,
98 CMD_READER_ICLASS_REPLAY = 0x0395,
99 CMD_ICLASS_READBLOCK = 0x0396,
100 CMD_ICLASS_WRITEBLOCK = 0x0397,
101 CMD_ICLASS_EML_MEMSET = 0x0398,
102 CMD_ICLASS_AUTHENTICATION = 0x0399,
103
104 --// For measurements of the antenna tuning
105 CMD_MEASURE_ANTENNA_TUNING = 0x0400,
106 CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401,
107 CMD_MEASURED_ANTENNA_TUNING = 0x0410,
108 CMD_LISTEN_READER_FIELD = 0x0420,
109
110 --// For direct FPGA control
111 CMD_FPGA_MAJOR_MODE_OFF = 0x0500,
112
113 --// For mifare commands
114 CMD_MIFARE_SET_DBGMODE = 0x0600,
115 CMD_MIFARE_EML_MEMCLR = 0x0601,
116 CMD_MIFARE_EML_MEMSET = 0x0602,
117 CMD_MIFARE_EML_MEMGET = 0x0603,
118 CMD_MIFARE_EML_CARDLOAD = 0x0604,
119
120 --// magic chinese card commands
121 CMD_MIFARE_CSETBLOCK = 0x0605,
122 CMD_MIFARE_CGETBLOCK = 0x0606,
123 CMD_MIFARE_CIDENT = 0x0607,
124
125 CMD_SIMULATE_MIFARE_CARD = 0x0610,
126
127 CMD_READER_MIFARE = 0x0611,
128 CMD_MIFARE_NESTED = 0x0612,
129
130 CMD_MIFARE_READBL = 0x0620,
131 CMD_MIFAREU_READBL = 0x0720,
132
133 CMD_MIFARE_READSC = 0x0621,
134 CMD_MIFAREU_READCARD = 0x0721,
135
136 CMD_MIFARE_WRITEBL = 0x0622,
137 CMD_MIFAREU_WRITEBL = 0x0722,
138 CMD_MIFAREU_WRITEBL_COMPAT = 0x0723,
139
140 CMD_MIFARE_CHKKEYS = 0x0623,
141
142 CMD_MIFARE_SNIFFER = 0x0630,
143
144 --//ultralightC
145 CMD_MIFAREUC_AUTH = 0x0724,
146 CMD_MIFAREUC_SETPWD = 0x0727,
147 CMD_MIFAREU_SETUID = 0x0728,
148
149 --// mifare desfire
150 CMD_MIFARE_DESFIRE_READBL = 0x0728,
151 CMD_MIFARE_DESFIRE_WRITEBL = 0x0729,
152 CMD_MIFARE_DESFIRE_AUTH1 = 0x072a,
153 CMD_MIFARE_DESFIRE_AUTH2 = 0x072b,
154 CMD_MIFARE_DES_READER = 0x072c,
155 CMD_MIFARE_DESFIRE_INFO = 0x072d,
156 CMD_MIFARE_DESFIRE = 0x072e,
157
158 CMD_UNKNOWN = 0xFFFF,
159 }
160
161
162 local _reverse_lookup,k,v = {}
163 for k, v in pairs(_commands) do
164 _reverse_lookup[v] = k
165 end
166 _commands.tostring = function(command)
167 if(type(command) == 'number') then
168 return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command)
169 end
170 return ("Error, numeric argument expected, got : %s"):format(tostring(command))
171 end
172
173 Command = {
174
175 new = function(self, o)
176
177 local o = o or {} -- create object if user does not provide one
178 setmetatable(o, self) -- DIY inheritance a'la javascript
179 self.__index = self
180
181 o.cmd = o.cmd or _commands.CMD_UNKNOWN
182 --o.arg1 = "test"
183 o.arg1 = o.arg1 or 0
184 o.arg2 = o.arg2 or 0
185 o.arg3 = o.arg3 or 0
186 local data = o.data or "0"
187
188 if(type(data) == 'string') then
189 -- We need to check if it is correct length, otherwise pad it
190 local len = string.len(data)
191 if(len < 1024) then
192 --Should be 1024 hex characters to represent 512 bytes of data
193 data = data .. string.rep("0",1024 - len )
194 end
195 if(len > 1024) then
196 -- OOps, a bit too much data here
197 print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) )
198 --
199 data = data:sub(1,1024)
200 end
201 else
202 print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data)))
203 end
204 o.data = data
205
206 return o
207 end,
208 parse = function (packet)
209 local count,cmd,arg1,arg2,arg3,data = bin.unpack('LLLLH512',packet)
210 return Command:new{cmd = cmd, arg1 = arg1, arg2 = arg2, arg3 = arg3, data = data}
211 end,
212 }
213 function Command:__tostring()
214 local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format(
215 _commands.tostring(self.cmd),
216 tostring(self.arg1),
217 tostring(self.arg2),
218 tostring(self.arg3),
219 tostring(self.data))
220 return output
221 end
222 function Command:getBytes()
223 --If a hex-string has been used
224 local data = self.data
225 local cmd = self.cmd
226 local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3
227 return bin.pack("LLLLH",cmd, arg1, arg2, arg3, data);
228 end
229 return _commands
Impressum, Datenschutz