]> git.zerfleddert.de Git - proxmark3-svn/blob - armsrc/legicrf.c
Re-submitting Midnitesnake's Mifare Ultralight Patch
[proxmark3-svn] / armsrc / legicrf.c
1 //-----------------------------------------------------------------------------
2 // (c) 2009 Henryk Plötz <henryk@ploetzli.ch>
3 //
4 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
5 // at your option, any later version. See the LICENSE.txt file for the text of
6 // the license.
7 //-----------------------------------------------------------------------------
8 // LEGIC RF simulation code
9 //-----------------------------------------------------------------------------
10
11 #include "proxmark3.h"
12 #include "apps.h"
13 #include "util.h"
14 #include "string.h"
15
16 #include "legicrf.h"
17 #include "legic_prng.h"
18 #include "crc.h"
19
20 static struct legic_frame {
21 int bits;
22 uint32_t data;
23 } current_frame;
24
25 static enum {
26 STATE_DISCON,
27 STATE_IV,
28 STATE_CON,
29 } legic_state;
30
31 static crc_t legic_crc;
32 static int legic_read_count;
33 static uint32_t legic_prng_bc;
34 static uint32_t legic_prng_iv;
35
36 static int legic_phase_drift;
37 static int legic_frame_drift;
38 static int legic_reqresp_drift;
39
40 AT91PS_TC timer;
41 AT91PS_TC prng_timer;
42
43 static void setup_timer(void)
44 {
45 /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging
46 * this it won't be terribly accurate but should be good enough.
47 */
48 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
49 timer = AT91C_BASE_TC1;
50 timer->TC_CCR = AT91C_TC_CLKDIS;
51 timer->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK;
52 timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
53
54 /*
55 * Set up Timer 2 to use for measuring time between frames in
56 * tag simulation mode. Runs 4x faster as Timer 1
57 */
58 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC2);
59 prng_timer = AT91C_BASE_TC2;
60 prng_timer->TC_CCR = AT91C_TC_CLKDIS;
61 prng_timer->TC_CMR = AT91C_TC_CLKS_TIMER_DIV2_CLOCK;
62 prng_timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
63 }
64
65 /* At TIMER_CLOCK3 (MCK/32) */
66 #define RWD_TIME_1 150 /* RWD_TIME_PAUSE off, 80us on = 100us */
67 #define RWD_TIME_0 90 /* RWD_TIME_PAUSE off, 40us on = 60us */
68 #define RWD_TIME_PAUSE 30 /* 20us */
69 #define RWD_TIME_FUZZ 20 /* rather generous 13us, since the peak detector + hysteresis fuzz quite a bit */
70 #define TAG_TIME_BIT 150 /* 100us for every bit */
71 #define TAG_TIME_WAIT 490 /* time from RWD frame end to tag frame start, experimentally determined */
72
73 #define SIM_DIVISOR 586 /* prng_time/SIM_DIVISOR count prng needs to be forwared */
74 #define SIM_SHIFT 900 /* prng_time+SIM_SHIFT shift of delayed start */
75
76 #define SESSION_IV 0x55
77 #define OFFSET_LOG 1024
78
79 #define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz)))
80
81 /* Generate Keystream */
82 static uint32_t get_key_stream(int skip, int count)
83 {
84 uint32_t key=0; int i;
85
86 /* Use int to enlarge timer tc to 32bit */
87 legic_prng_bc += prng_timer->TC_CV;
88 prng_timer->TC_CCR = AT91C_TC_SWTRG;
89
90 /* If skip == -1, forward prng time based */
91 if(skip == -1) {
92 i = (legic_prng_bc+SIM_SHIFT)/SIM_DIVISOR; /* Calculate Cycles based on timer */
93 i -= legic_prng_count(); /* substract cycles of finished frames */
94 i -= count; /* substract current frame length, rewidn to bedinning */
95 legic_prng_forward(i);
96 } else {
97 legic_prng_forward(skip);
98 }
99
100 /* Write Time Data into LOG */
101 if(count == 6) { i = -1; } else { i = legic_read_count; }
102 ((uint8_t*)BigBuf)[OFFSET_LOG+128+i] = legic_prng_count();
103 ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4] = (legic_prng_bc >> 0) & 0xff;
104 ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+1] = (legic_prng_bc >> 8) & 0xff;
105 ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+2] = (legic_prng_bc >>16) & 0xff;
106 ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+3] = (legic_prng_bc >>24) & 0xff;
107 ((uint8_t*)BigBuf)[OFFSET_LOG+384+i] = count;
108
109 /* Generate KeyStream */
110 for(i=0; i<count; i++) {
111 key |= legic_prng_get_bit() << i;
112 legic_prng_forward(1);
113 }
114 return key;
115 }
116
117 /* Send a frame in tag mode, the FPGA must have been set up by
118 * LegicRfSimulate
119 */
120 static void frame_send_tag(uint16_t response, int bits, int crypt)
121 {
122 /* Bitbang the response */
123 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
124 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
125 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
126
127 /* Use time to crypt frame */
128 if(crypt) {
129 legic_prng_forward(2); /* TAG_TIME_WAIT -> shift by 2 */
130 int i; int key = 0;
131 for(i=0; i<bits; i++) {
132 key |= legic_prng_get_bit() << i;
133 legic_prng_forward(1);
134 }
135 //Dbprintf("key = 0x%x", key);
136 response = response ^ key;
137 }
138
139 /* Wait for the frame start */
140 while(timer->TC_CV < (TAG_TIME_WAIT - 30)) ;
141
142 int i;
143 for(i=0; i<bits; i++) {
144 int nextbit = timer->TC_CV + TAG_TIME_BIT;
145 int bit = response & 1;
146 response = response >> 1;
147 if(bit) {
148 AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
149 } else {
150 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
151 }
152 while(timer->TC_CV < nextbit) ;
153 }
154 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
155 }
156
157 /* Send a frame in reader mode, the FPGA must have been set up by
158 * LegicRfReader
159 */
160 static void frame_send_rwd(uint32_t data, int bits)
161 {
162 /* Start clock */
163 timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
164 while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
165
166 int i;
167 for(i=0; i<bits; i++) {
168 int starttime = timer->TC_CV;
169 int pause_end = starttime + RWD_TIME_PAUSE, bit_end;
170 int bit = data & 1;
171 data = data >> 1;
172
173 if(bit ^ legic_prng_get_bit()) {
174 bit_end = starttime + RWD_TIME_1;
175 } else {
176 bit_end = starttime + RWD_TIME_0;
177 }
178
179 /* RWD_TIME_PAUSE time off, then some time on, so that the complete bit time is
180 * RWD_TIME_x, where x is the bit to be transmitted */
181 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
182 while(timer->TC_CV < pause_end) ;
183 AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
184 legic_prng_forward(1); /* bit duration is longest. use this time to forward the lfsr */
185
186 while(timer->TC_CV < bit_end) ;
187 }
188
189 {
190 /* One final pause to mark the end of the frame */
191 int pause_end = timer->TC_CV + RWD_TIME_PAUSE;
192 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
193 while(timer->TC_CV < pause_end) ;
194 AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
195 }
196
197 /* Reset the timer, to measure time until the start of the tag frame */
198 timer->TC_CCR = AT91C_TC_SWTRG;
199 while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
200 }
201
202 /* Receive a frame from the card in reader emulation mode, the FPGA and
203 * timer must have been set up by LegicRfReader and frame_send_rwd.
204 *
205 * The LEGIC RF protocol from card to reader does not include explicit
206 * frame start/stop information or length information. The reader must
207 * know beforehand how many bits it wants to receive. (Notably: a card
208 * sending a stream of 0-bits is indistinguishable from no card present.)
209 *
210 * Receive methodology: There is a fancy correlator in hi_read_rx_xcorr, but
211 * I'm not smart enough to use it. Instead I have patched hi_read_tx to output
212 * the ADC signal with hysteresis on SSP_DIN. Bit-bang that signal and look
213 * for edges. Count the edges in each bit interval. If they are approximately
214 * 0 this was a 0-bit, if they are approximately equal to the number of edges
215 * expected for a 212kHz subcarrier, this was a 1-bit. For timing we use the
216 * timer that's still running from frame_send_rwd in order to get a synchronization
217 * with the frame that we just sent.
218 *
219 * FIXME: Because we're relying on the hysteresis to just do the right thing
220 * the range is severely reduced (and you'll probably also need a good antenna).
221 * So this should be fixed some time in the future for a proper receiver.
222 */
223 static void frame_receive_rwd(struct legic_frame * const f, int bits, int crypt)
224 {
225 uint32_t the_bit = 1; /* Use a bitmask to save on shifts */
226 uint32_t data=0;
227 int i, old_level=0, edges=0;
228 int next_bit_at = TAG_TIME_WAIT;
229
230 if(bits > 32) {
231 bits = 32;
232 }
233
234 AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN;
235 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN;
236
237 /* we have some time now, precompute the cipher
238 * since we cannot compute it on the fly while reading */
239 legic_prng_forward(2);
240
241 if(crypt)
242 {
243 for(i=0; i<bits; i++) {
244 data |= legic_prng_get_bit() << i;
245 legic_prng_forward(1);
246 }
247 }
248
249 while(timer->TC_CV < next_bit_at) ;
250
251 next_bit_at += TAG_TIME_BIT;
252
253 for(i=0; i<bits; i++) {
254 edges = 0;
255 while(timer->TC_CV < next_bit_at) {
256 int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
257 if(level != old_level)
258 edges++;
259 old_level = level;
260 }
261 next_bit_at += TAG_TIME_BIT;
262
263 if(edges > 20 && edges < 60) { /* expected are 42 edges */
264 data ^= the_bit;
265 }
266 the_bit <<= 1;
267 }
268
269 f->data = data;
270 f->bits = bits;
271
272 /* Reset the timer, to synchronize the next frame */
273 timer->TC_CCR = AT91C_TC_SWTRG;
274 while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
275 }
276
277 static void frame_append_bit(struct legic_frame * const f, int bit)
278 {
279 if(f->bits >= 31) {
280 return; /* Overflow, won't happen */
281 }
282 f->data |= (bit<<f->bits);
283 f->bits++;
284 }
285
286 static void frame_clean(struct legic_frame * const f)
287 {
288 f->data = 0;
289 f->bits = 0;
290 }
291
292 static uint32_t perform_setup_phase_rwd(int iv)
293 {
294
295 /* Switch on carrier and let the tag charge for 1ms */
296 AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT;
297 SpinDelay(1);
298
299 legic_prng_init(0); /* no keystream yet */
300 frame_send_rwd(iv, 7);
301 legic_prng_init(iv);
302
303 frame_clean(&current_frame);
304 frame_receive_rwd(&current_frame, 6, 1);
305 legic_prng_forward(1); /* we wait anyways */
306 while(timer->TC_CV < 387) ; /* ~ 258us */
307 frame_send_rwd(0x19, 6);
308
309 return current_frame.data;
310 }
311
312 static void LegicCommonInit(void) {
313 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
314 FpgaSetupSsc();
315 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX);
316
317 /* Bitbang the transmitter */
318 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
319 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
320 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
321
322 setup_timer();
323
324 crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0);
325 }
326
327 static void switch_off_tag_rwd(void)
328 {
329 /* Switch off carrier, make sure tag is reset */
330 AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT;
331 SpinDelay(10);
332
333 WDT_HIT();
334 }
335 /* calculate crc for a legic command */
336 static int LegicCRC(int byte_index, int value, int cmd_sz) {
337 crc_clear(&legic_crc);
338 crc_update(&legic_crc, 1, 1); /* CMD_READ */
339 crc_update(&legic_crc, byte_index, cmd_sz-1);
340 crc_update(&legic_crc, value, 8);
341 return crc_finish(&legic_crc);
342 }
343
344 int legic_read_byte(int byte_index, int cmd_sz) {
345 int byte;
346
347 legic_prng_forward(4); /* we wait anyways */
348 while(timer->TC_CV < 387) ; /* ~ 258us + 100us*delay */
349
350 frame_send_rwd(1 | (byte_index << 1), cmd_sz);
351 frame_clean(&current_frame);
352
353 frame_receive_rwd(&current_frame, 12, 1);
354
355 byte = current_frame.data & 0xff;
356 if( LegicCRC(byte_index, byte, cmd_sz) != (current_frame.data >> 8) ) {
357 Dbprintf("!!! crc mismatch: expected %x but got %x !!!",
358 LegicCRC(byte_index, current_frame.data & 0xff, cmd_sz), current_frame.data >> 8);
359 return -1;
360 }
361
362 return byte;
363 }
364
365 /* legic_write_byte() is not included, however it's trivial to implement
366 * and here are some hints on what remains to be done:
367 *
368 * * assemble a write_cmd_frame with crc and send it
369 * * wait until the tag sends back an ACK ('1' bit unencrypted)
370 * * forward the prng based on the timing
371 */
372 int legic_write_byte(int byte, int addr, int addr_sz) {
373 //do not write UID, CRC, DCF
374 if(addr <= 0x06) {
375 return 0;
376 }
377
378 //== send write command ==============================
379 crc_clear(&legic_crc);
380 crc_update(&legic_crc, 0, 1); /* CMD_WRITE */
381 crc_update(&legic_crc, addr, addr_sz);
382 crc_update(&legic_crc, byte, 8);
383
384 uint32_t crc = crc_finish(&legic_crc);
385 uint32_t cmd = ((crc <<(addr_sz+1+8)) //CRC
386 |(byte <<(addr_sz+1)) //Data
387 |(addr <<1) //Address
388 |(0x00 <<0)); //CMD = W
389 uint32_t cmd_sz = addr_sz+1+8+4; //crc+data+cmd
390
391 legic_prng_forward(2); /* we wait anyways */
392 while(timer->TC_CV < 387) ; /* ~ 258us */
393 frame_send_rwd(cmd, cmd_sz);
394
395 //== wait for ack ====================================
396 int t, old_level=0, edges=0;
397 int next_bit_at =0;
398 while(timer->TC_CV < 387) ; /* ~ 258us */
399 for(t=0; t<80; t++) {
400 edges = 0;
401 next_bit_at += TAG_TIME_BIT;
402 while(timer->TC_CV < next_bit_at) {
403 int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
404 if(level != old_level) {
405 edges++;
406 }
407 old_level = level;
408 }
409 if(edges > 20 && edges < 60) { /* expected are 42 edges */
410 int t = timer->TC_CV;
411 int c = t/TAG_TIME_BIT;
412 timer->TC_CCR = AT91C_TC_SWTRG;
413 while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
414 legic_prng_forward(c);
415 return 0;
416 }
417 }
418 timer->TC_CCR = AT91C_TC_SWTRG;
419 while(timer->TC_CV > 1) ; /* Wait till the clock has reset */
420 return -1;
421 }
422
423 int LegicRfReader(int offset, int bytes) {
424 int byte_index=0, cmd_sz=0, card_sz=0;
425
426 LegicCommonInit();
427
428 memset(BigBuf, 0, 1024);
429
430 DbpString("setting up legic card");
431 uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV);
432 switch_off_tag_rwd(); //we lose to mutch time with dprintf
433 switch(tag_type) {
434 case 0x1d:
435 DbpString("MIM 256 card found, reading card ...");
436 cmd_sz = 9;
437 card_sz = 256;
438 break;
439 case 0x3d:
440 DbpString("MIM 1024 card found, reading card ...");
441 cmd_sz = 11;
442 card_sz = 1024;
443 break;
444 default:
445 Dbprintf("Unknown card format: %x",tag_type);
446 return -1;
447 }
448 if(bytes == -1) {
449 bytes = card_sz;
450 }
451 if(bytes+offset >= card_sz) {
452 bytes = card_sz-offset;
453 }
454
455 perform_setup_phase_rwd(SESSION_IV);
456
457 LED_B_ON();
458 while(byte_index < bytes) {
459 int r = legic_read_byte(byte_index+offset, cmd_sz);
460 if(r == -1 ||BUTTON_PRESS()) {
461 DbpString("operation aborted");
462 switch_off_tag_rwd();
463 LED_B_OFF();
464 LED_C_OFF();
465 return -1;
466 }
467 ((uint8_t*)BigBuf)[byte_index] = r;
468 WDT_HIT();
469 byte_index++;
470 if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF();
471 }
472 LED_B_OFF();
473 LED_C_OFF();
474 switch_off_tag_rwd();
475 Dbprintf("Card read, use 'hf legic decode' or");
476 Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7);
477 return 0;
478 }
479
480 void LegicRfWriter(int bytes, int offset) {
481 int byte_index=0, addr_sz=0;
482
483 LegicCommonInit();
484
485 DbpString("setting up legic card");
486 uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV);
487 switch_off_tag_rwd();
488 switch(tag_type) {
489 case 0x1d:
490 if(offset+bytes > 0x100) {
491 Dbprintf("Error: can not write to 0x%03.3x on MIM 256", offset+bytes);
492 return;
493 }
494 addr_sz = 8;
495 Dbprintf("MIM 256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes);
496 break;
497 case 0x3d:
498 if(offset+bytes > 0x400) {
499 Dbprintf("Error: can not write to 0x%03.3x on MIM 1024", offset+bytes);
500 return;
501 }
502 addr_sz = 10;
503 Dbprintf("MIM 1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset+bytes);
504 break;
505 default:
506 Dbprintf("No or unknown card found, aborting");
507 return;
508 }
509
510 LED_B_ON();
511 perform_setup_phase_rwd(SESSION_IV);
512 legic_prng_forward(2);
513 while(byte_index < bytes) {
514 int r = legic_write_byte(((uint8_t*)BigBuf)[byte_index+offset], byte_index+offset, addr_sz);
515 if((r != 0) || BUTTON_PRESS()) {
516 Dbprintf("operation aborted @ 0x%03.3x", byte_index);
517 switch_off_tag_rwd();
518 LED_B_OFF();
519 LED_C_OFF();
520 return;
521 }
522 WDT_HIT();
523 byte_index++;
524 if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF();
525 }
526 LED_B_OFF();
527 LED_C_OFF();
528 DbpString("write successful");
529 }
530
531 int timestamp;
532
533 /* Handle (whether to respond) a frame in tag mode */
534 static void frame_handle_tag(struct legic_frame const * const f)
535 {
536 /* First Part of Handshake (IV) */
537 if(f->bits == 7) {
538 if(f->data == SESSION_IV) {
539 LED_C_ON();
540 prng_timer->TC_CCR = AT91C_TC_SWTRG;
541 legic_prng_init(f->data);
542 frame_send_tag(0x3d, 6, 1); /* 0x3d^0x26 = 0x1b */
543 legic_state = STATE_IV;
544 legic_read_count = 0;
545 legic_prng_bc = 0;
546 legic_prng_iv = f->data;
547
548 /* TIMEOUT */
549 timer->TC_CCR = AT91C_TC_SWTRG;
550 while(timer->TC_CV > 1);
551 while(timer->TC_CV < 280);
552 return;
553 } else if((prng_timer->TC_CV % 50) > 40) {
554 legic_prng_init(f->data);
555 frame_send_tag(0x3d, 6, 1);
556 SpinDelay(20);
557 return;
558 }
559 }
560
561 /* 0x19==??? */
562 if(legic_state == STATE_IV) {
563 if((f->bits == 6) && (f->data == (0x19 ^ get_key_stream(1, 6)))) {
564 legic_state = STATE_CON;
565
566 /* TIMEOUT */
567 timer->TC_CCR = AT91C_TC_SWTRG;
568 while(timer->TC_CV > 1);
569 while(timer->TC_CV < 200);
570 return;
571 } else {
572 legic_state = STATE_DISCON;
573 LED_C_OFF();
574 Dbprintf("0x19 - Frame: %03.3x", f->data);
575 return;
576 }
577 }
578
579 /* Read */
580 if(f->bits == 11) {
581 if(legic_state == STATE_CON) {
582 int key = get_key_stream(-1, 11); //legic_phase_drift, 11);
583 int addr = f->data ^ key; addr = addr >> 1;
584 int data = ((uint8_t*)BigBuf)[addr];
585 int hash = LegicCRC(addr, data, 11) << 8;
586 ((uint8_t*)BigBuf)[OFFSET_LOG+legic_read_count] = (uint8_t)addr;
587 legic_read_count++;
588
589 //Dbprintf("Data:%03.3x, key:%03.3x, addr: %03.3x, read_c:%u", f->data, key, addr, read_c);
590 legic_prng_forward(legic_reqresp_drift);
591
592 frame_send_tag(hash | data, 12, 1);
593
594 /* SHORT TIMEOUT */
595 timer->TC_CCR = AT91C_TC_SWTRG;
596 while(timer->TC_CV > 1);
597 legic_prng_forward(legic_frame_drift);
598 while(timer->TC_CV < 180);
599 return;
600 }
601 }
602
603 /* Write */
604 if(f->bits == 23) {
605 int key = get_key_stream(-1, 23); //legic_frame_drift, 23);
606 int addr = f->data ^ key; addr = addr >> 1; addr = addr & 0x3ff;
607 int data = f->data ^ key; data = data >> 11; data = data & 0xff;
608
609 /* write command */
610 legic_state = STATE_DISCON;
611 LED_C_OFF();
612 Dbprintf("write - addr: %x, data: %x", addr, data);
613 return;
614 }
615
616 if(legic_state != STATE_DISCON) {
617 Dbprintf("Unexpected: sz:%u, Data:%03.3x, State:%u, Count:%u", f->bits, f->data, legic_state, legic_read_count);
618 int i;
619 Dbprintf("IV: %03.3x", legic_prng_iv);
620 for(i = 0; i<legic_read_count; i++) {
621 Dbprintf("Read Nb: %u, Addr: %u", i, ((uint8_t*)BigBuf)[OFFSET_LOG+i]);
622 }
623
624 for(i = -1; i<legic_read_count; i++) {
625 uint32_t t;
626 t = ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4];
627 t |= ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+1] << 8;
628 t |= ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+2] <<16;
629 t |= ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+3] <<24;
630
631 Dbprintf("Cycles: %u, Frame Length: %u, Time: %u",
632 ((uint8_t*)BigBuf)[OFFSET_LOG+128+i],
633 ((uint8_t*)BigBuf)[OFFSET_LOG+384+i],
634 t);
635 }
636 }
637 legic_state = STATE_DISCON;
638 legic_read_count = 0;
639 SpinDelay(10);
640 LED_C_OFF();
641 return;
642 }
643
644 /* Read bit by bit untill full frame is received
645 * Call to process frame end answer
646 */
647 static void emit(int bit)
648 {
649 if(bit == -1) {
650 if(current_frame.bits <= 4) {
651 frame_clean(&current_frame);
652 } else {
653 frame_handle_tag(&current_frame);
654 frame_clean(&current_frame);
655 }
656 WDT_HIT();
657 } else if(bit == 0) {
658 frame_append_bit(&current_frame, 0);
659 } else if(bit == 1) {
660 frame_append_bit(&current_frame, 1);
661 }
662 }
663
664 void LegicRfSimulate(int phase, int frame, int reqresp)
665 {
666 /* ADC path high-frequency peak detector, FPGA in high-frequency simulator mode,
667 * modulation mode set to 212kHz subcarrier. We are getting the incoming raw
668 * envelope waveform on DIN and should send our response on DOUT.
669 *
670 * The LEGIC RF protocol is pulse-pause-encoding from reader to card, so we'll
671 * measure the time between two rising edges on DIN, and no encoding on the
672 * subcarrier from card to reader, so we'll just shift out our verbatim data
673 * on DOUT, 1 bit is 100us. The time from reader to card frame is still unclear,
674 * seems to be 300us-ish.
675 */
676
677 if(phase < 0) {
678 int i;
679 for(i=0; i<=reqresp; i++) {
680 legic_prng_init(SESSION_IV);
681 Dbprintf("i=%u, key 0x%3.3x", i, get_key_stream(i, frame));
682 }
683 return;
684 }
685
686 legic_phase_drift = phase;
687 legic_frame_drift = frame;
688 legic_reqresp_drift = reqresp;
689
690 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
691 FpgaSetupSsc();
692 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K);
693
694 /* Bitbang the receiver */
695 AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN;
696 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN;
697
698 setup_timer();
699 crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0);
700
701 int old_level = 0;
702 int active = 0;
703 legic_state = STATE_DISCON;
704
705 LED_B_ON();
706 DbpString("Starting Legic emulator, press button to end");
707 while(!BUTTON_PRESS()) {
708 int level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
709 int time = timer->TC_CV;
710
711 if(level != old_level) {
712 if(level == 1) {
713 timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
714 if(FUZZ_EQUAL(time, RWD_TIME_1, RWD_TIME_FUZZ)) {
715 /* 1 bit */
716 emit(1);
717 active = 1;
718 LED_A_ON();
719 } else if(FUZZ_EQUAL(time, RWD_TIME_0, RWD_TIME_FUZZ)) {
720 /* 0 bit */
721 emit(0);
722 active = 1;
723 LED_A_ON();
724 } else if(active) {
725 /* invalid */
726 emit(-1);
727 active = 0;
728 LED_A_OFF();
729 }
730 }
731 }
732
733 if(time >= (RWD_TIME_1+RWD_TIME_FUZZ) && active) {
734 /* Frame end */
735 emit(-1);
736 active = 0;
737 LED_A_OFF();
738 }
739
740 if(time >= (20*RWD_TIME_1) && (timer->TC_SR & AT91C_TC_CLKSTA)) {
741 timer->TC_CCR = AT91C_TC_CLKDIS;
742 }
743
744 old_level = level;
745 WDT_HIT();
746 }
747 DbpString("Stopped");
748 LED_B_OFF();
749 LED_A_OFF();
750 LED_C_OFF();
751 }
752
Impressum, Datenschutz