]> git.zerfleddert.de Git - proxmark3-svn/blob - armsrc/hitag2.c
iclass refactor/cleanup
[proxmark3-svn] / armsrc / hitag2.c
1 //-----------------------------------------------------------------------------
2 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
3 // at your option, any later version. See the LICENSE.txt file for the text of
4 // the license.
5 //-----------------------------------------------------------------------------
6 // Hitag2 emulation (preliminary test version)
7 //
8 // (c) 2009 Henryk Plötz <henryk@ploetzli.ch>
9 //-----------------------------------------------------------------------------
10 // Hitag2 complete rewrite of the code
11 // - Fixed modulation/encoding issues
12 // - Rewrote code for transponder emulation
13 // - Added snooping of transponder communication
14 // - Added reader functionality
15 //
16 // (c) 2012 Roel Verdult
17 //-----------------------------------------------------------------------------
18
19 #include "proxmark3.h"
20 #include "apps.h"
21 #include "util.h"
22 #include "hitag2.h"
23 #include "string.h"
24 #include "BigBuf.h"
25
26 static bool bQuiet;
27
28 static bool bCrypto;
29 static bool bAuthenticating;
30 static bool bPwd;
31 static bool bSuccessful;
32
33
34
35 struct hitag2_tag {
36 uint32_t uid;
37 enum {
38 TAG_STATE_RESET = 0x01, // Just powered up, awaiting GetSnr
39 TAG_STATE_ACTIVATING = 0x02 , // In activation phase (password mode), sent UID, awaiting reader password
40 TAG_STATE_ACTIVATED = 0x03, // Activation complete, awaiting read/write commands
41 TAG_STATE_WRITING = 0x04, // In write command, awaiting sector contents to be written
42 } state;
43 unsigned int active_sector;
44 byte_t crypto_active;
45 uint64_t cs;
46 byte_t sectors[12][4];
47 };
48
49 static struct hitag2_tag tag = {
50 .state = TAG_STATE_RESET,
51 .sectors = { // Password mode: | Crypto mode:
52 [0] = { 0x02, 0x4e, 0x02, 0x20}, // UID | UID
53 [1] = { 0x4d, 0x49, 0x4b, 0x52}, // Password RWD | 32 bit LSB key
54 [2] = { 0x20, 0xf0, 0x4f, 0x4e}, // Reserved | 16 bit MSB key, 16 bit reserved
55 [3] = { 0x0e, 0xaa, 0x48, 0x54}, // Configuration, password TAG | Configuration, password TAG
56 [4] = { 0x46, 0x5f, 0x4f, 0x4b}, // Data: F_OK
57 [5] = { 0x55, 0x55, 0x55, 0x55}, // Data: UUUU
58 [6] = { 0xaa, 0xaa, 0xaa, 0xaa}, // Data: ....
59 [7] = { 0x55, 0x55, 0x55, 0x55}, // Data: UUUU
60 [8] = { 0x00, 0x00, 0x00, 0x00}, // RSK Low
61 [9] = { 0x00, 0x00, 0x00, 0x00}, // RSK High
62 [10] = { 0x00, 0x00, 0x00, 0x00}, // RCF
63 [11] = { 0x00, 0x00, 0x00, 0x00}, // SYNC
64 },
65 };
66
67 // ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces.
68 // Historically it used to be FREE_BUFFER_SIZE, which was 2744.
69 #define AUTH_TABLE_LENGTH 2744
70 static byte_t* auth_table;
71 static size_t auth_table_pos = 0;
72 static size_t auth_table_len = AUTH_TABLE_LENGTH;
73
74 static byte_t password[4];
75 static byte_t NrAr[8];
76 static byte_t key[8];
77 static uint64_t cipher_state;
78
79 /* Following is a modified version of cryptolib.com/ciphers/hitag2/ */
80 // Software optimized 48-bit Philips/NXP Mifare Hitag2 PCF7936/46/47/52 stream cipher algorithm by I.C. Wiener 2006-2007.
81 // For educational purposes only.
82 // No warranties or guarantees of any kind.
83 // This code is released into the public domain by its author.
84
85 // Basic macros:
86
87 #define u8 uint8_t
88 #define u32 uint32_t
89 #define u64 uint64_t
90 #define rev8(x) ((((x)>>7)&1)+((((x)>>6)&1)<<1)+((((x)>>5)&1)<<2)+((((x)>>4)&1)<<3)+((((x)>>3)&1)<<4)+((((x)>>2)&1)<<5)+((((x)>>1)&1)<<6)+(((x)&1)<<7))
91 #define rev16(x) (rev8 (x)+(rev8 (x>> 8)<< 8))
92 #define rev32(x) (rev16(x)+(rev16(x>>16)<<16))
93 #define rev64(x) (rev32(x)+(rev32(x>>32)<<32))
94 #define bit(x,n) (((x)>>(n))&1)
95 #define bit32(x,n) ((((x)[(n)>>5])>>((n)))&1)
96 #define inv32(x,i,n) ((x)[(i)>>5]^=((u32)(n))<<((i)&31))
97 #define rotl64(x, n) ((((u64)(x))<<((n)&63))+(((u64)(x))>>((0-(n))&63)))
98
99 // Single bit Hitag2 functions:
100
101 #define i4(x,a,b,c,d) ((u32)((((x)>>(a))&1)+(((x)>>(b))&1)*2+(((x)>>(c))&1)*4+(((x)>>(d))&1)*8))
102
103 static const u32 ht2_f4a = 0x2C79; // 0010 1100 0111 1001
104 static const u32 ht2_f4b = 0x6671; // 0110 0110 0111 0001
105 static const u32 ht2_f5c = 0x7907287B; // 0111 1001 0000 0111 0010 1000 0111 1011
106
107 static u32 _f20 (const u64 x)
108 {
109 u32 i5;
110
111 i5 = ((ht2_f4a >> i4 (x, 1, 2, 4, 5)) & 1)* 1
112 + ((ht2_f4b >> i4 (x, 7,11,13,14)) & 1)* 2
113 + ((ht2_f4b >> i4 (x,16,20,22,25)) & 1)* 4
114 + ((ht2_f4b >> i4 (x,27,28,30,32)) & 1)* 8
115 + ((ht2_f4a >> i4 (x,33,42,43,45)) & 1)*16;
116
117 return (ht2_f5c >> i5) & 1;
118 }
119
120 static u64 _hitag2_init (const u64 key, const u32 serial, const u32 IV)
121 {
122 u32 i;
123 u64 x = ((key & 0xFFFF) << 32) + serial;
124
125 for (i = 0; i < 32; i++)
126 {
127 x >>= 1;
128 x += (u64) (_f20 (x) ^ (((IV >> i) ^ (key >> (i+16))) & 1)) << 47;
129 }
130 return x;
131 }
132
133 static u64 _hitag2_round (u64 *state)
134 {
135 u64 x = *state;
136
137 x = (x >> 1) +
138 ((((x >> 0) ^ (x >> 2) ^ (x >> 3) ^ (x >> 6)
139 ^ (x >> 7) ^ (x >> 8) ^ (x >> 16) ^ (x >> 22)
140 ^ (x >> 23) ^ (x >> 26) ^ (x >> 30) ^ (x >> 41)
141 ^ (x >> 42) ^ (x >> 43) ^ (x >> 46) ^ (x >> 47)) & 1) << 47);
142
143 *state = x;
144 return _f20 (x);
145 }
146
147 static u32 _hitag2_byte (u64 * x)
148 {
149 u32 i, c;
150
151 for (i = 0, c = 0; i < 8; i++) c += (u32) _hitag2_round (x) << (i^7);
152 return c;
153 }
154
155 static int hitag2_reset(void)
156 {
157 tag.state = TAG_STATE_RESET;
158 tag.crypto_active = 0;
159 return 0;
160 }
161
162 static int hitag2_init(void)
163 {
164 // memcpy(&tag, &resetdata, sizeof(tag));
165 hitag2_reset();
166 return 0;
167 }
168
169 static void hitag2_cipher_reset(struct hitag2_tag *tag, const byte_t *iv)
170 {
171 uint64_t key = ((uint64_t)tag->sectors[2][2]) |
172 ((uint64_t)tag->sectors[2][3] << 8) |
173 ((uint64_t)tag->sectors[1][0] << 16) |
174 ((uint64_t)tag->sectors[1][1] << 24) |
175 ((uint64_t)tag->sectors[1][2] << 32) |
176 ((uint64_t)tag->sectors[1][3] << 40);
177 uint32_t uid = ((uint32_t)tag->sectors[0][0]) |
178 ((uint32_t)tag->sectors[0][1] << 8) |
179 ((uint32_t)tag->sectors[0][2] << 16) |
180 ((uint32_t)tag->sectors[0][3] << 24);
181 uint32_t iv_ = (((uint32_t)(iv[0]))) |
182 (((uint32_t)(iv[1])) << 8) |
183 (((uint32_t)(iv[2])) << 16) |
184 (((uint32_t)(iv[3])) << 24);
185 tag->cs = _hitag2_init(rev64(key), rev32(uid), rev32(iv_));
186 }
187
188 static int hitag2_cipher_authenticate(uint64_t* cs, const byte_t *authenticator_is)
189 {
190 byte_t authenticator_should[4];
191 authenticator_should[0] = ~_hitag2_byte(cs);
192 authenticator_should[1] = ~_hitag2_byte(cs);
193 authenticator_should[2] = ~_hitag2_byte(cs);
194 authenticator_should[3] = ~_hitag2_byte(cs);
195 return (memcmp(authenticator_should, authenticator_is, 4) == 0);
196 }
197
198 static int hitag2_cipher_transcrypt(uint64_t* cs, byte_t *data, unsigned int bytes, unsigned int bits)
199 {
200 int i;
201 for(i=0; i<bytes; i++) data[i] ^= _hitag2_byte(cs);
202 for(i=0; i<bits; i++) data[bytes] ^= _hitag2_round(cs) << (7-i);
203 return 0;
204 }
205
206 // Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
207 // TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz
208 // Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier)
209 // T0 = TIMER_CLOCK1 / 125000 = 192
210 #define T0 192
211
212 #define SHORT_COIL() LOW(GPIO_SSC_DOUT)
213 #define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
214
215 #define HITAG_FRAME_LEN 20
216 #define HITAG_T_STOP 36 /* T_EOF should be > 36 */
217 #define HITAG_T_LOW 8 /* T_LOW should be 4..10 */
218 #define HITAG_T_0_MIN 15 /* T[0] should be 18..22 */
219 #define HITAG_T_1_MIN 25 /* T[1] should be 26..30 */
220 //#define HITAG_T_EOF 40 /* T_EOF should be > 36 */
221 #define HITAG_T_EOF 80 /* T_EOF should be > 36 */
222 #define HITAG_T_WAIT_1 200 /* T_wresp should be 199..206 */
223 #define HITAG_T_WAIT_2 90 /* T_wresp should be 199..206 */
224 #define HITAG_T_WAIT_MAX 300 /* bit more than HITAG_T_WAIT_1 + HITAG_T_WAIT_2 */
225
226 #define HITAG_T_TAG_ONE_HALF_PERIOD 10
227 #define HITAG_T_TAG_TWO_HALF_PERIOD 25
228 #define HITAG_T_TAG_THREE_HALF_PERIOD 41
229 #define HITAG_T_TAG_FOUR_HALF_PERIOD 57
230
231 #define HITAG_T_TAG_HALF_PERIOD 16
232 #define HITAG_T_TAG_FULL_PERIOD 32
233
234 #define HITAG_T_TAG_CAPTURE_ONE_HALF 13
235 #define HITAG_T_TAG_CAPTURE_TWO_HALF 25
236 #define HITAG_T_TAG_CAPTURE_THREE_HALF 41
237 #define HITAG_T_TAG_CAPTURE_FOUR_HALF 57
238
239
240 static void hitag_send_bit(int bit) {
241 LED_A_ON();
242 // Reset clock for the next bit
243 AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
244
245 // Fixed modulation, earlier proxmark version used inverted signal
246 if(bit == 0) {
247 // Manchester: Unloaded, then loaded |__--|
248 LOW(GPIO_SSC_DOUT);
249 while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_HALF_PERIOD);
250 HIGH(GPIO_SSC_DOUT);
251 while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_FULL_PERIOD);
252 } else {
253 // Manchester: Loaded, then unloaded |--__|
254 HIGH(GPIO_SSC_DOUT);
255 while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_HALF_PERIOD);
256 LOW(GPIO_SSC_DOUT);
257 while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_FULL_PERIOD);
258 }
259 LED_A_OFF();
260 }
261
262 static void hitag_send_frame(const byte_t* frame, size_t frame_len)
263 {
264 // Send start of frame
265 for(size_t i=0; i<5; i++) {
266 hitag_send_bit(1);
267 }
268
269 // Send the content of the frame
270 for(size_t i=0; i<frame_len; i++) {
271 hitag_send_bit((frame[i/8] >> (7-(i%8)))&1);
272 }
273
274 // Drop the modulation
275 LOW(GPIO_SSC_DOUT);
276 }
277
278
279 static void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
280 {
281 byte_t rx_air[HITAG_FRAME_LEN];
282
283 // Copy the (original) received frame how it is send over the air
284 memcpy(rx_air,rx,nbytes(rxlen));
285
286 if(tag.crypto_active) {
287 hitag2_cipher_transcrypt(&(tag.cs),rx,rxlen/8,rxlen%8);
288 }
289
290 // Reset the transmission frame length
291 *txlen = 0;
292
293 // Try to find out which command was send by selecting on length (in bits)
294 switch (rxlen) {
295 // Received 11000 from the reader, request for UID, send UID
296 case 05: {
297 // Always send over the air in the clear plaintext mode
298 if(rx_air[0] != 0xC0) {
299 // Unknown frame ?
300 return;
301 }
302 *txlen = 32;
303 memcpy(tx,tag.sectors[0],4);
304 tag.crypto_active = 0;
305 }
306 break;
307
308 // Read/Write command: ..xx x..y yy with yyy == ~xxx, xxx is sector number
309 case 10: {
310 unsigned int sector = (~( ((rx[0]<<2)&0x04) | ((rx[1]>>6)&0x03) ) & 0x07);
311 // Verify complement of sector index
312 if(sector != ((rx[0]>>3)&0x07)) {
313 //DbpString("Transmission error (read/write)");
314 return;
315 }
316
317 switch (rx[0] & 0xC6) {
318 // Read command: 11xx x00y
319 case 0xC0:
320 memcpy(tx,tag.sectors[sector],4);
321 *txlen = 32;
322 break;
323
324 // Inverted Read command: 01xx x10y
325 case 0x44:
326 for (size_t i=0; i<4; i++) {
327 tx[i] = tag.sectors[sector][i] ^ 0xff;
328 }
329 *txlen = 32;
330 break;
331
332 // Write command: 10xx x01y
333 case 0x82:
334 // Prepare write, acknowledge by repeating command
335 memcpy(tx,rx,nbytes(rxlen));
336 *txlen = rxlen;
337 tag.active_sector = sector;
338 tag.state=TAG_STATE_WRITING;
339 break;
340
341 // Unknown command
342 default:
343 Dbprintf("Uknown command: %02x %02x",rx[0],rx[1]);
344 return;
345 break;
346 }
347 }
348 break;
349
350 // Writing data or Reader password
351 case 32: {
352 if(tag.state == TAG_STATE_WRITING) {
353 // These are the sector contents to be written. We don't have to do anything else.
354 memcpy(tag.sectors[tag.active_sector],rx,nbytes(rxlen));
355 tag.state=TAG_STATE_RESET;
356 return;
357 } else {
358 // Received RWD password, respond with configuration and our password
359 if(memcmp(rx,tag.sectors[1],4) != 0) {
360 DbpString("Reader password is wrong");
361 return;
362 }
363 *txlen = 32;
364 memcpy(tx,tag.sectors[3],4);
365 }
366 }
367 break;
368
369 // Received RWD authentication challenge and respnse
370 case 64: {
371 // Store the authentication attempt
372 if (auth_table_len < (AUTH_TABLE_LENGTH-8)) {
373 memcpy(auth_table+auth_table_len,rx,8);
374 auth_table_len += 8;
375 }
376
377 // Reset the cipher state
378 hitag2_cipher_reset(&tag,rx);
379 // Check if the authentication was correct
380 if(!hitag2_cipher_authenticate(&(tag.cs),rx+4)) {
381 // The reader failed to authenticate, do nothing
382 Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed!",rx[0],rx[1],rx[2],rx[3],rx[4],rx[5],rx[6],rx[7]);
383 return;
384 }
385 // Succesful, but commented out reporting back to the Host, this may delay to much.
386 // Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x OK!",rx[0],rx[1],rx[2],rx[3],rx[4],rx[5],rx[6],rx[7]);
387
388 // Activate encryption algorithm for all further communication
389 tag.crypto_active = 1;
390
391 // Use the tag password as response
392 memcpy(tx,tag.sectors[3],4);
393 *txlen = 32;
394 }
395 break;
396 }
397
398 // LogTraceHitag(rx,rxlen,0,0,false);
399 // LogTraceHitag(tx,*txlen,0,0,true);
400
401 if(tag.crypto_active) {
402 hitag2_cipher_transcrypt(&(tag.cs), tx, *txlen/8, *txlen%8);
403 }
404 }
405
406 static void hitag_reader_send_bit(int bit) {
407 LED_A_ON();
408 // Reset clock for the next bit
409 AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
410
411 // Binary puls length modulation (BPLM) is used to encode the data stream
412 // This means that a transmission of a one takes longer than that of a zero
413
414 // Enable modulation, which means, drop the the field
415 HIGH(GPIO_SSC_DOUT);
416
417 // Wait for 4-10 times the carrier period
418 while(AT91C_BASE_TC0->TC_CV < T0*6);
419 // SpinDelayUs(8*8);
420
421 // Disable modulation, just activates the field again
422 LOW(GPIO_SSC_DOUT);
423
424 if(bit == 0) {
425 // Zero bit: |_-|
426 while(AT91C_BASE_TC0->TC_CV < T0*22);
427 // SpinDelayUs(16*8);
428 } else {
429 // One bit: |_--|
430 while(AT91C_BASE_TC0->TC_CV < T0*28);
431 // SpinDelayUs(22*8);
432 }
433 LED_A_OFF();
434 }
435
436
437 static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
438 {
439 // Send the content of the frame
440 for(size_t i=0; i<frame_len; i++) {
441 hitag_reader_send_bit((frame[i/8] >> (7-(i%8)))&1);
442 }
443 // Send EOF
444 AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
445 // Enable modulation, which means, drop the the field
446 HIGH(GPIO_SSC_DOUT);
447 // Wait for 4-10 times the carrier period
448 while(AT91C_BASE_TC0->TC_CV < T0*6);
449 // Disable modulation, just activates the field again
450 LOW(GPIO_SSC_DOUT);
451 }
452
453 size_t blocknr;
454
455 static bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
456 // Reset the transmission frame length
457 *txlen = 0;
458
459 // Try to find out which command was send by selecting on length (in bits)
460 switch (rxlen) {
461 // No answer, try to resurrect
462 case 0: {
463 // Stop if there is no answer (after sending password)
464 if (bPwd) {
465 DbpString("Password failed!");
466 return false;
467 }
468 *txlen = 5;
469 memcpy(tx,"\xc0",nbytes(*txlen));
470 } break;
471
472 // Received UID, tag password
473 case 32: {
474 if (!bPwd) {
475 *txlen = 32;
476 memcpy(tx,password,4);
477 bPwd = true;
478 memcpy(tag.sectors[blocknr],rx,4);
479 blocknr++;
480 } else {
481
482 if(blocknr == 1){
483 //store password in block1, the TAG answers with Block3, but we need the password in memory
484 memcpy(tag.sectors[blocknr],tx,4);
485 }else{
486 memcpy(tag.sectors[blocknr],rx,4);
487 }
488
489 blocknr++;
490 if (blocknr > 7) {
491 DbpString("Read succesful!");
492 bSuccessful = true;
493 return false;
494 }
495 *txlen = 10;
496 tx[0] = 0xc0 | (blocknr << 3) | ((blocknr^7) >> 2);
497 tx[1] = ((blocknr^7) << 6);
498 }
499 } break;
500
501 // Unexpected response
502 default: {
503 Dbprintf("Uknown frame length: %d",rxlen);
504 return false;
505 } break;
506 }
507 return true;
508 }
509
510 static bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
511 // Reset the transmission frame length
512 *txlen = 0;
513
514 if(bCrypto) {
515 hitag2_cipher_transcrypt(&cipher_state,rx,rxlen/8,rxlen%8);
516 }
517
518 // Try to find out which command was send by selecting on length (in bits)
519 switch (rxlen) {
520 // No answer, try to resurrect
521 case 0: {
522 // Stop if there is no answer while we are in crypto mode (after sending NrAr)
523 if (bCrypto) {
524 // Failed during authentication
525 if (bAuthenticating) {
526 DbpString("Authentication failed!");
527 return false;
528 } else {
529 // Failed reading a block, could be (read/write) locked, skip block and re-authenticate
530 if (blocknr == 1) {
531 // Write the low part of the key in memory
532 memcpy(tag.sectors[1],key+2,4);
533 } else if (blocknr == 2) {
534 // Write the high part of the key in memory
535 tag.sectors[2][0] = 0x00;
536 tag.sectors[2][1] = 0x00;
537 tag.sectors[2][2] = key[0];
538 tag.sectors[2][3] = key[1];
539 } else {
540 // Just put zero's in the memory (of the unreadable block)
541 memset(tag.sectors[blocknr],0x00,4);
542 }
543 blocknr++;
544 bCrypto = false;
545 }
546 } else {
547 *txlen = 5;
548 memcpy(tx,"\xc0",nbytes(*txlen));
549 }
550 } break;
551
552 // Received UID, crypto tag answer
553 case 32: {
554 if (!bCrypto) {
555 uint64_t ui64key = key[0] | ((uint64_t)key[1]) << 8 | ((uint64_t)key[2]) << 16 | ((uint64_t)key[3]) << 24 | ((uint64_t)key[4]) << 32 | ((uint64_t)key[5]) << 40;
556 uint32_t ui32uid = rx[0] | ((uint32_t)rx[1]) << 8 | ((uint32_t)rx[2]) << 16 | ((uint32_t)rx[3]) << 24;
557 cipher_state = _hitag2_init(rev64(ui64key), rev32(ui32uid), 0);
558 memset(tx,0x00,4);
559 memset(tx+4,0xff,4);
560 hitag2_cipher_transcrypt(&cipher_state,tx+4,4,0);
561 *txlen = 64;
562 bCrypto = true;
563 bAuthenticating = true;
564 } else {
565 // Check if we received answer tag (at)
566 if (bAuthenticating) {
567 bAuthenticating = false;
568 } else {
569 // Store the received block
570 memcpy(tag.sectors[blocknr],rx,4);
571 blocknr++;
572 }
573 if (blocknr > 7) {
574 DbpString("Read succesful!");
575 bSuccessful = true;
576 return false;
577 }
578 *txlen = 10;
579 tx[0] = 0xc0 | (blocknr << 3) | ((blocknr^7) >> 2);
580 tx[1] = ((blocknr^7) << 6);
581 }
582 } break;
583
584 // Unexpected response
585 default: {
586 Dbprintf("Uknown frame length: %d",rxlen);
587 return false;
588 } break;
589 }
590
591
592 if(bCrypto) {
593 // We have to return now to avoid double encryption
594 if (!bAuthenticating) {
595 hitag2_cipher_transcrypt(&cipher_state,tx,*txlen/8,*txlen%8);
596 }
597 }
598
599 return true;
600 }
601
602
603 static bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
604 // Reset the transmission frame length
605 *txlen = 0;
606
607 // Try to find out which command was send by selecting on length (in bits)
608 switch (rxlen) {
609 // No answer, try to resurrect
610 case 0: {
611 // Stop if there is no answer while we are in crypto mode (after sending NrAr)
612 if (bCrypto) {
613 DbpString("Authentication failed!");
614 return false;
615 }
616 *txlen = 5;
617 memcpy(tx,"\xc0",nbytes(*txlen));
618 } break;
619
620 // Received UID, crypto tag answer
621 case 32: {
622 if (!bCrypto) {
623 *txlen = 64;
624 memcpy(tx,NrAr,8);
625 bCrypto = true;
626 } else {
627 DbpString("Authentication succesful!");
628 // We are done... for now
629 return false;
630 }
631 } break;
632
633 // Unexpected response
634 default: {
635 Dbprintf("Uknown frame length: %d",rxlen);
636 return false;
637 } break;
638 }
639
640 return true;
641 }
642
643
644 static bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
645
646 // Reset the transmission frame length
647 *txlen = 0;
648
649 // Try to find out which command was send by selecting on length (in bits)
650 switch (rxlen) {
651 // No answer, try to resurrect
652 case 0: {
653 // Stop if there is no answer while we are in crypto mode (after sending NrAr)
654 if (bCrypto) {
655 Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
656
657 // Removing failed entry from authentiations table
658 memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
659 auth_table_len -= 8;
660
661 // Return if we reached the end of the authentications table
662 bCrypto = false;
663 if (auth_table_pos == auth_table_len) {
664 return false;
665 }
666
667 // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
668 memcpy(NrAr,auth_table+auth_table_pos,8);
669 }
670 *txlen = 5;
671 memcpy(tx,"\xc0",nbytes(*txlen));
672 } break;
673
674 // Received UID, crypto tag answer, or read block response
675 case 32: {
676 if (!bCrypto) {
677 *txlen = 64;
678 memcpy(tx,NrAr,8);
679 bCrypto = true;
680 } else {
681 Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x OK",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
682 bCrypto = false;
683 if ((auth_table_pos+8) == auth_table_len) {
684 return false;
685 }
686 auth_table_pos += 8;
687 memcpy(NrAr,auth_table+auth_table_pos,8);
688 }
689 } break;
690
691 default: {
692 Dbprintf("Uknown frame length: %d",rxlen);
693 return false;
694 } break;
695 }
696
697 return true;
698 }
699
700
701 void SnoopHitag(uint32_t type) {
702 int frame_count;
703 int response;
704 int overflow;
705 bool rising_edge;
706 bool reader_frame;
707 int lastbit;
708 bool bSkip;
709 int tag_sof;
710 byte_t rx[HITAG_FRAME_LEN];
711 size_t rxlen=0;
712
713 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
714
715 // Clean up trace and prepare it for storing frames
716 set_tracing(TRUE);
717 clear_trace();
718
719 auth_table_len = 0;
720 auth_table_pos = 0;
721
722 BigBuf_free();
723 auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
724 memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
725
726 DbpString("Starting Hitag2 snoop");
727 LED_D_ON();
728
729 // Set up eavesdropping mode, frequency divisor which will drive the FPGA
730 // and analog mux selection.
731 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
732 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
733 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
734 RELAY_OFF();
735
736 // Configure output pin that is connected to the FPGA (for modulating)
737 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
738 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
739
740 // Disable modulation, we are going to eavesdrop, not modulate ;)
741 LOW(GPIO_SSC_DOUT);
742
743 // Enable Peripheral Clock for TIMER_CLOCK1, used to capture edges of the reader frames
744 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
745 AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
746
747 // Disable timer during configuration
748 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
749
750 // Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
751 // external trigger rising edge, load RA on rising edge of TIOA.
752 uint32_t t1_channel_mode = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_BOTH | AT91C_TC_ABETRG | AT91C_TC_LDRA_BOTH;
753 AT91C_BASE_TC1->TC_CMR = t1_channel_mode;
754
755 // Enable and reset counter
756 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
757
758 // Reset the received frame, frame count and timing info
759 memset(rx,0x00,sizeof(rx));
760 frame_count = 0;
761 response = 0;
762 overflow = 0;
763 reader_frame = false;
764 lastbit = 1;
765 bSkip = true;
766 tag_sof = 4;
767
768 while(!BUTTON_PRESS()) {
769 // Watchdog hit
770 WDT_HIT();
771
772 // Receive frame, watch for at most T0*EOF periods
773 while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_EOF) {
774 // Check if rising edge in modulation is detected
775 if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
776 // Retrieve the new timing values
777 int ra = (AT91C_BASE_TC1->TC_RA/T0);
778
779 // Find out if we are dealing with a rising or falling edge
780 rising_edge = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME) > 0;
781
782 // Shorter periods will only happen with reader frames
783 if (!reader_frame && rising_edge && ra < HITAG_T_TAG_CAPTURE_ONE_HALF) {
784 // Switch from tag to reader capture
785 LED_C_OFF();
786 reader_frame = true;
787 memset(rx,0x00,sizeof(rx));
788 rxlen = 0;
789 }
790
791 // Only handle if reader frame and rising edge, or tag frame and falling edge
792 if (reader_frame != rising_edge) {
793 overflow += ra;
794 continue;
795 }
796
797 // Add the buffered timing values of earlier captured edges which were skipped
798 ra += overflow;
799 overflow = 0;
800
801 if (reader_frame) {
802 LED_B_ON();
803 // Capture reader frame
804 if(ra >= HITAG_T_STOP) {
805 if (rxlen != 0) {
806 //DbpString("wierd0?");
807 }
808 // Capture the T0 periods that have passed since last communication or field drop (reset)
809 response = (ra - HITAG_T_LOW);
810 } else if(ra >= HITAG_T_1_MIN ) {
811 // '1' bit
812 rx[rxlen / 8] |= 1 << (7-(rxlen%8));
813 rxlen++;
814 } else if(ra >= HITAG_T_0_MIN) {
815 // '0' bit
816 rx[rxlen / 8] |= 0 << (7-(rxlen%8));
817 rxlen++;
818 } else {
819 // Ignore wierd value, is to small to mean anything
820 }
821 } else {
822 LED_C_ON();
823 // Capture tag frame (manchester decoding using only falling edges)
824 if(ra >= HITAG_T_EOF) {
825 if (rxlen != 0) {
826 //DbpString("wierd1?");
827 }
828 // Capture the T0 periods that have passed since last communication or field drop (reset)
829 // We always recieve a 'one' first, which has the falling edge after a half period |-_|
830 response = ra-HITAG_T_TAG_HALF_PERIOD;
831 } else if(ra >= HITAG_T_TAG_CAPTURE_FOUR_HALF) {
832 // Manchester coding example |-_|_-|-_| (101)
833 rx[rxlen / 8] |= 0 << (7-(rxlen%8));
834 rxlen++;
835 rx[rxlen / 8] |= 1 << (7-(rxlen%8));
836 rxlen++;
837 } else if(ra >= HITAG_T_TAG_CAPTURE_THREE_HALF) {
838 // Manchester coding example |_-|...|_-|-_| (0...01)
839 rx[rxlen / 8] |= 0 << (7-(rxlen%8));
840 rxlen++;
841 // We have to skip this half period at start and add the 'one' the second time
842 if (!bSkip) {
843 rx[rxlen / 8] |= 1 << (7-(rxlen%8));
844 rxlen++;
845 }
846 lastbit = !lastbit;
847 bSkip = !bSkip;
848 } else if(ra >= HITAG_T_TAG_CAPTURE_TWO_HALF) {
849 // Manchester coding example |_-|_-| (00) or |-_|-_| (11)
850 if (tag_sof) {
851 // Ignore bits that are transmitted during SOF
852 tag_sof--;
853 } else {
854 // bit is same as last bit
855 rx[rxlen / 8] |= lastbit << (7-(rxlen%8));
856 rxlen++;
857 }
858 } else {
859 // Ignore wierd value, is to small to mean anything
860 }
861 }
862 }
863 }
864
865 // Check if frame was captured
866 if(rxlen > 0) {
867 frame_count++;
868 if (!LogTraceHitag(rx,rxlen,response,0,reader_frame)) {
869 DbpString("Trace full");
870 break;
871 }
872
873 // Check if we recognize a valid authentication attempt
874 if (nbytes(rxlen) == 8) {
875 // Store the authentication attempt
876 if (auth_table_len < (AUTH_TABLE_LENGTH-8)) {
877 memcpy(auth_table+auth_table_len,rx,8);
878 auth_table_len += 8;
879 }
880 }
881
882 // Reset the received frame and response timing info
883 memset(rx,0x00,sizeof(rx));
884 response = 0;
885 reader_frame = false;
886 lastbit = 1;
887 bSkip = true;
888 tag_sof = 4;
889 overflow = 0;
890
891 LED_B_OFF();
892 LED_C_OFF();
893 } else {
894 // Save the timer overflow, will be 0 when frame was received
895 overflow += (AT91C_BASE_TC1->TC_CV/T0);
896 }
897 // Reset the frame length
898 rxlen = 0;
899 // Reset the timer to restart while-loop that receives frames
900 AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG;
901 }
902 LED_A_ON();
903 LED_B_OFF();
904 LED_C_OFF();
905 LED_D_OFF();
906 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
907 AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
908 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
909 LED_A_OFF();
910
911 // Dbprintf("frame received: %d",frame_count);
912 // Dbprintf("Authentication Attempts: %d",(auth_table_len/8));
913 // DbpString("All done");
914 }
915
916 void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
917 int frame_count;
918 int response;
919 int overflow;
920 byte_t rx[HITAG_FRAME_LEN];
921 size_t rxlen=0;
922 byte_t tx[HITAG_FRAME_LEN];
923 size_t txlen=0;
924 bool bQuitTraceFull = false;
925 bQuiet = false;
926
927 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
928
929 // Clean up trace and prepare it for storing frames
930 set_tracing(TRUE);
931 clear_trace();
932
933 auth_table_len = 0;
934 auth_table_pos = 0;
935 byte_t* auth_table;
936 BigBuf_free();
937 auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
938 memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
939
940 DbpString("Starting Hitag2 simulation");
941 LED_D_ON();
942 hitag2_init();
943
944 if (tag_mem_supplied) {
945 DbpString("Loading hitag2 memory...");
946 memcpy((byte_t*)tag.sectors,data,48);
947 }
948
949 uint32_t block = 0;
950 for (size_t i=0; i<12; i++) {
951 for (size_t j=0; j<4; j++) {
952 block <<= 8;
953 block |= tag.sectors[i][j];
954 }
955 Dbprintf("| %d | %08x |",i,block);
956 }
957
958 // Set up simulator mode, frequency divisor which will drive the FPGA
959 // and analog mux selection.
960 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
961 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
962 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
963 RELAY_OFF();
964
965 // Configure output pin that is connected to the FPGA (for modulating)
966 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
967 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
968
969 // Disable modulation at default, which means release resistance
970 LOW(GPIO_SSC_DOUT);
971
972 // Enable Peripheral Clock for TIMER_CLOCK0, used to measure exact timing before answering
973 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0);
974
975 // Enable Peripheral Clock for TIMER_CLOCK1, used to capture edges of the reader frames
976 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
977 AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
978
979 // Disable timer during configuration
980 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
981
982 // Capture mode, default timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
983 // external trigger rising edge, load RA on rising edge of TIOA.
984 AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_RISING | AT91C_TC_ABETRG | AT91C_TC_LDRA_RISING;
985
986 // Reset the received frame, frame count and timing info
987 memset(rx,0x00,sizeof(rx));
988 frame_count = 0;
989 response = 0;
990 overflow = 0;
991
992 // Enable and reset counter
993 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
994
995 while(!BUTTON_PRESS()) {
996 // Watchdog hit
997 WDT_HIT();
998
999 // Receive frame, watch for at most T0*EOF periods
1000 while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_EOF) {
1001 // Check if rising edge in modulation is detected
1002 if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
1003 // Retrieve the new timing values
1004 int ra = (AT91C_BASE_TC1->TC_RA/T0) + overflow;
1005 overflow = 0;
1006
1007 // Reset timer every frame, we have to capture the last edge for timing
1008 AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
1009
1010 LED_B_ON();
1011
1012 // Capture reader frame
1013 if(ra >= HITAG_T_STOP) {
1014 if (rxlen != 0) {
1015 //DbpString("wierd0?");
1016 }
1017 // Capture the T0 periods that have passed since last communication or field drop (reset)
1018 response = (ra - HITAG_T_LOW);
1019 } else if(ra >= HITAG_T_1_MIN ) {
1020 // '1' bit
1021 rx[rxlen / 8] |= 1 << (7-(rxlen%8));
1022 rxlen++;
1023 } else if(ra >= HITAG_T_0_MIN) {
1024 // '0' bit
1025 rx[rxlen / 8] |= 0 << (7-(rxlen%8));
1026 rxlen++;
1027 } else {
1028 // Ignore wierd value, is to small to mean anything
1029 }
1030 }
1031 }
1032
1033 // Check if frame was captured
1034 if(rxlen > 4) {
1035 frame_count++;
1036 if (!bQuiet) {
1037 if (!LogTraceHitag(rx,rxlen,response,0,true)) {
1038 DbpString("Trace full");
1039 if (bQuitTraceFull) {
1040 break;
1041 } else {
1042 bQuiet = true;
1043 }
1044 }
1045 }
1046
1047 // Disable timer 1 with external trigger to avoid triggers during our own modulation
1048 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
1049
1050 // Process the incoming frame (rx) and prepare the outgoing frame (tx)
1051 hitag2_handle_reader_command(rx,rxlen,tx,&txlen);
1052
1053 // Wait for HITAG_T_WAIT_1 carrier periods after the last reader bit,
1054 // not that since the clock counts since the rising edge, but T_Wait1 is
1055 // with respect to the falling edge, we need to wait actually (T_Wait1 - T_Low)
1056 // periods. The gap time T_Low varies (4..10). All timer values are in
1057 // terms of T0 units
1058 while(AT91C_BASE_TC0->TC_CV < T0*(HITAG_T_WAIT_1-HITAG_T_LOW));
1059
1060 // Send and store the tag answer (if there is any)
1061 if (txlen) {
1062 // Transmit the tag frame
1063 hitag_send_frame(tx,txlen);
1064 // Store the frame in the trace
1065 if (!bQuiet) {
1066 if (!LogTraceHitag(tx,txlen,0,0,false)) {
1067 DbpString("Trace full");
1068 if (bQuitTraceFull) {
1069 break;
1070 } else {
1071 bQuiet = true;
1072 }
1073 }
1074 }
1075 }
1076
1077 // Reset the received frame and response timing info
1078 memset(rx,0x00,sizeof(rx));
1079 response = 0;
1080
1081 // Enable and reset external trigger in timer for capturing future frames
1082 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
1083 LED_B_OFF();
1084 }
1085 // Reset the frame length
1086 rxlen = 0;
1087 // Save the timer overflow, will be 0 when frame was received
1088 overflow += (AT91C_BASE_TC1->TC_CV/T0);
1089 // Reset the timer to restart while-loop that receives frames
1090 AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG;
1091 }
1092 LED_B_OFF();
1093 LED_D_OFF();
1094 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
1095 AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
1096 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1097
1098 DbpString("Sim Stopped");
1099
1100 }
1101
1102 void ReaderHitag(hitag_function htf, hitag_data* htd) {
1103 int frame_count;
1104 int response;
1105 byte_t rx[HITAG_FRAME_LEN];
1106 size_t rxlen=0;
1107 byte_t txbuf[HITAG_FRAME_LEN];
1108 byte_t* tx = txbuf;
1109 size_t txlen=0;
1110 int lastbit;
1111 bool bSkip;
1112 int reset_sof;
1113 int tag_sof;
1114 int t_wait = HITAG_T_WAIT_MAX;
1115 bool bStop;
1116 bool bQuitTraceFull = false;
1117
1118 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
1119 // Reset the return status
1120 bSuccessful = false;
1121
1122 // Clean up trace and prepare it for storing frames
1123 set_tracing(TRUE);
1124 clear_trace();
1125
1126 DbpString("Starting Hitag reader family");
1127
1128 // Check configuration
1129 switch(htf) {
1130 case RHT2F_PASSWORD: {
1131 Dbprintf("List identifier in password mode");
1132 memcpy(password,htd->pwd.password,4);
1133 blocknr = 0;
1134 bQuitTraceFull = false;
1135 bQuiet = false;
1136 bPwd = false;
1137 } break;
1138
1139 case RHT2F_AUTHENTICATE: {
1140 DbpString("Authenticating using nr,ar pair:");
1141 memcpy(NrAr,htd->auth.NrAr,8);
1142 Dbhexdump(8,NrAr,false);
1143 bQuiet = false;
1144 bCrypto = false;
1145 bAuthenticating = false;
1146 bQuitTraceFull = true;
1147 } break;
1148
1149 case RHT2F_CRYPTO: {
1150 DbpString("Authenticating using key:");
1151 memcpy(key,htd->crypto.key,4); //HACK; 4 or 6?? I read both in the code.
1152 Dbhexdump(6,key,false);
1153 blocknr = 0;
1154 bQuiet = false;
1155 bCrypto = false;
1156 bAuthenticating = false;
1157 bQuitTraceFull = true;
1158 } break;
1159
1160 case RHT2F_TEST_AUTH_ATTEMPTS: {
1161 Dbprintf("Testing %d authentication attempts",(auth_table_len/8));
1162 auth_table_pos = 0;
1163 memcpy(NrAr, auth_table, 8);
1164 bQuitTraceFull = false;
1165 bQuiet = false;
1166 bCrypto = false;
1167 } break;
1168
1169 default: {
1170 Dbprintf("Error, unknown function: %d",htf);
1171 return;
1172 } break;
1173 }
1174
1175 LED_D_ON();
1176 hitag2_init();
1177
1178 // Configure output and enable pin that is connected to the FPGA (for modulating)
1179 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
1180 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
1181
1182 // Set fpga in edge detect with reader field, we can modulate as reader now
1183 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
1184
1185 // Set Frequency divisor which will drive the FPGA and analog mux selection
1186 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
1187 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
1188 RELAY_OFF();
1189
1190 // Disable modulation at default, which means enable the field
1191 LOW(GPIO_SSC_DOUT);
1192
1193 // Give it a bit of time for the resonant antenna to settle.
1194 SpinDelay(30);
1195
1196 // Enable Peripheral Clock for TIMER_CLOCK0, used to measure exact timing before answering
1197 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0);
1198
1199 // Enable Peripheral Clock for TIMER_CLOCK1, used to capture edges of the tag frames
1200 AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
1201 AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
1202
1203 // Disable timer during configuration
1204 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
1205
1206 // Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
1207 // external trigger rising edge, load RA on falling edge of TIOA.
1208 AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_FALLING | AT91C_TC_ABETRG | AT91C_TC_LDRA_FALLING;
1209
1210 // Enable and reset counters
1211 AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
1212 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
1213
1214 // Reset the received frame, frame count and timing info
1215 frame_count = 0;
1216 response = 0;
1217 lastbit = 1;
1218 bStop = false;
1219
1220 // Tag specific configuration settings (sof, timings, etc.)
1221 if (htf < 10){
1222 // hitagS settings
1223 reset_sof = 1;
1224 t_wait = 200;
1225 DbpString("Configured for hitagS reader");
1226 } else if (htf < 20) {
1227 // hitag1 settings
1228 reset_sof = 1;
1229 t_wait = 200;
1230 DbpString("Configured for hitag1 reader");
1231 } else if (htf < 30) {
1232 // hitag2 settings
1233 reset_sof = 4;
1234 t_wait = HITAG_T_WAIT_2;
1235 DbpString("Configured for hitag2 reader");
1236 } else {
1237 Dbprintf("Error, unknown hitag reader type: %d",htf);
1238 return;
1239 }
1240
1241 while(!bStop && !BUTTON_PRESS()) {
1242 // Watchdog hit
1243 WDT_HIT();
1244
1245 // Check if frame was captured and store it
1246 if(rxlen > 0) {
1247 frame_count++;
1248 if (!bQuiet) {
1249 if (!LogTraceHitag(rx,rxlen,response,0,false)) {
1250 DbpString("Trace full");
1251 if (bQuitTraceFull) {
1252 break;
1253 } else {
1254 bQuiet = true;
1255 }
1256 }
1257 }
1258 }
1259
1260 // By default reset the transmission buffer
1261 tx = txbuf;
1262 switch(htf) {
1263 case RHT2F_PASSWORD: {
1264 bStop = !hitag2_password(rx,rxlen,tx,&txlen);
1265 } break;
1266 case RHT2F_AUTHENTICATE: {
1267 bStop = !hitag2_authenticate(rx,rxlen,tx,&txlen);
1268 } break;
1269 case RHT2F_CRYPTO: {
1270 bStop = !hitag2_crypto(rx,rxlen,tx,&txlen);
1271 } break;
1272 case RHT2F_TEST_AUTH_ATTEMPTS: {
1273 bStop = !hitag2_test_auth_attempts(rx,rxlen,tx,&txlen);
1274 } break;
1275 default: {
1276 Dbprintf("Error, unknown function: %d",htf);
1277 return;
1278 } break;
1279 }
1280
1281 // Send and store the reader command
1282 // Disable timer 1 with external trigger to avoid triggers during our own modulation
1283 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
1284
1285 // Wait for HITAG_T_WAIT_2 carrier periods after the last tag bit before transmitting,
1286 // Since the clock counts since the last falling edge, a 'one' means that the
1287 // falling edge occured halfway the period. with respect to this falling edge,
1288 // we need to wait (T_Wait2 + half_tag_period) when the last was a 'one'.
1289 // All timer values are in terms of T0 units
1290 while(AT91C_BASE_TC0->TC_CV < T0*(t_wait+(HITAG_T_TAG_HALF_PERIOD*lastbit)));
1291
1292 // Transmit the reader frame
1293 hitag_reader_send_frame(tx,txlen);
1294
1295 // Enable and reset external trigger in timer for capturing future frames
1296 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
1297
1298 // Add transmitted frame to total count
1299 if(txlen > 0) {
1300 frame_count++;
1301 if (!bQuiet) {
1302 // Store the frame in the trace
1303 if (!LogTraceHitag(tx,txlen,HITAG_T_WAIT_2,0,true)) {
1304 if (bQuitTraceFull) {
1305 break;
1306 } else {
1307 bQuiet = true;
1308 }
1309 }
1310 }
1311 }
1312
1313 // Reset values for receiving frames
1314 memset(rx,0x00,sizeof(rx));
1315 rxlen = 0;
1316 lastbit = 1;
1317 bSkip = true;
1318 tag_sof = reset_sof;
1319 response = 0;
1320
1321 // Receive frame, watch for at most T0*EOF periods
1322 while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_WAIT_MAX) {
1323 // Check if falling edge in tag modulation is detected
1324 if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
1325 // Retrieve the new timing values
1326 int ra = (AT91C_BASE_TC1->TC_RA/T0);
1327
1328 // Reset timer every frame, we have to capture the last edge for timing
1329 AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
1330
1331 LED_B_ON();
1332
1333 // Capture tag frame (manchester decoding using only falling edges)
1334 if(ra >= HITAG_T_EOF) {
1335 if (rxlen != 0) {
1336 //DbpString("wierd1?");
1337 }
1338 // Capture the T0 periods that have passed since last communication or field drop (reset)
1339 // We always recieve a 'one' first, which has the falling edge after a half period |-_|
1340 response = ra-HITAG_T_TAG_HALF_PERIOD;
1341 } else if(ra >= HITAG_T_TAG_CAPTURE_FOUR_HALF) {
1342 // Manchester coding example |-_|_-|-_| (101)
1343 rx[rxlen / 8] |= 0 << (7-(rxlen%8));
1344 rxlen++;
1345 rx[rxlen / 8] |= 1 << (7-(rxlen%8));
1346 rxlen++;
1347 } else if(ra >= HITAG_T_TAG_CAPTURE_THREE_HALF) {
1348 // Manchester coding example |_-|...|_-|-_| (0...01)
1349 rx[rxlen / 8] |= 0 << (7-(rxlen%8));
1350 rxlen++;
1351 // We have to skip this half period at start and add the 'one' the second time
1352 if (!bSkip) {
1353 rx[rxlen / 8] |= 1 << (7-(rxlen%8));
1354 rxlen++;
1355 }
1356 lastbit = !lastbit;
1357 bSkip = !bSkip;
1358 } else if(ra >= HITAG_T_TAG_CAPTURE_TWO_HALF) {
1359 // Manchester coding example |_-|_-| (00) or |-_|-_| (11)
1360 if (tag_sof) {
1361 // Ignore bits that are transmitted during SOF
1362 tag_sof--;
1363 } else {
1364 // bit is same as last bit
1365 rx[rxlen / 8] |= lastbit << (7-(rxlen%8));
1366 rxlen++;
1367 }
1368 } else {
1369 // Ignore wierd value, is to small to mean anything
1370 }
1371 }
1372
1373 // We can break this loop if we received the last bit from a frame
1374 if (AT91C_BASE_TC1->TC_CV > T0*HITAG_T_EOF) {
1375 if (rxlen>0) break;
1376 }
1377 }
1378 }
1379 LED_B_OFF();
1380 LED_D_OFF();
1381 AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
1382 AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
1383 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1384 Dbprintf("frame received: %d",frame_count);
1385 DbpString("All done");
1386 cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48);
1387 }
Impressum, Datenschutz