]> git.zerfleddert.de Git - proxmark3-svn/blob - armsrc/lfops.c
5250c1e0ee8765644ec76be12ba815dc8f4c57de
[proxmark3-svn] / armsrc / lfops.c
1 //-----------------------------------------------------------------------------
2 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
3 // at your option, any later version. See the LICENSE.txt file for the text of
4 // the license.
5 //-----------------------------------------------------------------------------
6 // Miscellaneous routines for low frequency tag operations.
7 // Tags supported here so far are Texas Instruments (TI), HID
8 // Also routines for raw mode reading/simulating of LF waveform
9 //-----------------------------------------------------------------------------
10
11 #include "proxmark3.h"
12 #include "apps.h"
13 #include "util.h"
14 #include "hitag2.h"
15 #include "crc16.h"
16 #include "string.h"
17 #include "lfdemod.h"
18 #include "lfsampling.h"
19 #include "usb_cdc.h" //test
20
21 /**
22 * Function to do a modulation and then get samples.
23 * @param delay_off
24 * @param period_0
25 * @param period_1
26 * @param command
27 */
28 void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint32_t period_1, uint8_t *command)
29 {
30
31 int divisor_used = 95; // 125 KHz
32 // see if 'h' was specified
33
34 if (command[strlen((char *) command) - 1] == 'h')
35 divisor_used = 88; // 134.8 KHz
36
37 sample_config sc = { 0,0,1, divisor_used, 0};
38 setSamplingConfig(&sc);
39
40 /* Make sure the tag is reset */
41 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
42 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
43 SpinDelay(2500);
44
45 LFSetupFPGAForADC(sc.divisor, 1);
46
47 // And a little more time for the tag to fully power up
48 SpinDelay(2000);
49
50 // now modulate the reader field
51 while(*command != '\0' && *command != ' ') {
52 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
53 LED_D_OFF();
54 SpinDelayUs(delay_off);
55 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
56
57 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
58 LED_D_ON();
59 if(*(command++) == '0')
60 SpinDelayUs(period_0);
61 else
62 SpinDelayUs(period_1);
63 }
64 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
65 LED_D_OFF();
66 SpinDelayUs(delay_off);
67 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
68
69 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
70
71 // now do the read
72 DoAcquisition_config(false);
73 }
74
75
76
77 /* blank r/w tag data stream
78 ...0000000000000000 01111111
79 1010101010101010101010101010101010101010101010101010101010101010
80 0011010010100001
81 01111111
82 101010101010101[0]000...
83
84 [5555fe852c5555555555555555fe0000]
85 */
86 void ReadTItag(void)
87 {
88 // some hardcoded initial params
89 // when we read a TI tag we sample the zerocross line at 2Mhz
90 // TI tags modulate a 1 as 16 cycles of 123.2Khz
91 // TI tags modulate a 0 as 16 cycles of 134.2Khz
92 #define FSAMPLE 2000000
93 #define FREQLO 123200
94 #define FREQHI 134200
95
96 signed char *dest = (signed char *)BigBuf_get_addr();
97 uint16_t n = BigBuf_max_traceLen();
98 // 128 bit shift register [shift3:shift2:shift1:shift0]
99 uint32_t shift3 = 0, shift2 = 0, shift1 = 0, shift0 = 0;
100
101 int i, cycles=0, samples=0;
102 // how many sample points fit in 16 cycles of each frequency
103 uint32_t sampleslo = (FSAMPLE<<4)/FREQLO, sampleshi = (FSAMPLE<<4)/FREQHI;
104 // when to tell if we're close enough to one freq or another
105 uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
106
107 // TI tags charge at 134.2Khz
108 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
109 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
110
111 // Place FPGA in passthrough mode, in this mode the CROSS_LO line
112 // connects to SSP_DIN and the SSP_DOUT logic level controls
113 // whether we're modulating the antenna (high)
114 // or listening to the antenna (low)
115 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
116
117 // get TI tag data into the buffer
118 AcquireTiType();
119
120 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
121
122 for (i=0; i<n-1; i++) {
123 // count cycles by looking for lo to hi zero crossings
124 if ( (dest[i]<0) && (dest[i+1]>0) ) {
125 cycles++;
126 // after 16 cycles, measure the frequency
127 if (cycles>15) {
128 cycles=0;
129 samples=i-samples; // number of samples in these 16 cycles
130
131 // TI bits are coming to us lsb first so shift them
132 // right through our 128 bit right shift register
133 shift0 = (shift0>>1) | (shift1 << 31);
134 shift1 = (shift1>>1) | (shift2 << 31);
135 shift2 = (shift2>>1) | (shift3 << 31);
136 shift3 >>= 1;
137
138 // check if the cycles fall close to the number
139 // expected for either the low or high frequency
140 if ( (samples>(sampleslo-threshold)) && (samples<(sampleslo+threshold)) ) {
141 // low frequency represents a 1
142 shift3 |= (1<<31);
143 } else if ( (samples>(sampleshi-threshold)) && (samples<(sampleshi+threshold)) ) {
144 // high frequency represents a 0
145 } else {
146 // probably detected a gay waveform or noise
147 // use this as gaydar or discard shift register and start again
148 shift3 = shift2 = shift1 = shift0 = 0;
149 }
150 samples = i;
151
152 // for each bit we receive, test if we've detected a valid tag
153
154 // if we see 17 zeroes followed by 6 ones, we might have a tag
155 // remember the bits are backwards
156 if ( ((shift0 & 0x7fffff) == 0x7e0000) ) {
157 // if start and end bytes match, we have a tag so break out of the loop
158 if ( ((shift0>>16)&0xff) == ((shift3>>8)&0xff) ) {
159 cycles = 0xF0B; //use this as a flag (ugly but whatever)
160 break;
161 }
162 }
163 }
164 }
165 }
166
167 // if flag is set we have a tag
168 if (cycles!=0xF0B) {
169 DbpString("Info: No valid tag detected.");
170 } else {
171 // put 64 bit data into shift1 and shift0
172 shift0 = (shift0>>24) | (shift1 << 8);
173 shift1 = (shift1>>24) | (shift2 << 8);
174
175 // align 16 bit crc into lower half of shift2
176 shift2 = ((shift2>>24) | (shift3 << 8)) & 0x0ffff;
177
178 // if r/w tag, check ident match
179 if (shift3 & (1<<15) ) {
180 DbpString("Info: TI tag is rewriteable");
181 // only 15 bits compare, last bit of ident is not valid
182 if (((shift3 >> 16) ^ shift0) & 0x7fff ) {
183 DbpString("Error: Ident mismatch!");
184 } else {
185 DbpString("Info: TI tag ident is valid");
186 }
187 } else {
188 DbpString("Info: TI tag is readonly");
189 }
190
191 // WARNING the order of the bytes in which we calc crc below needs checking
192 // i'm 99% sure the crc algorithm is correct, but it may need to eat the
193 // bytes in reverse or something
194 // calculate CRC
195 uint32_t crc=0;
196
197 crc = update_crc16(crc, (shift0)&0xff);
198 crc = update_crc16(crc, (shift0>>8)&0xff);
199 crc = update_crc16(crc, (shift0>>16)&0xff);
200 crc = update_crc16(crc, (shift0>>24)&0xff);
201 crc = update_crc16(crc, (shift1)&0xff);
202 crc = update_crc16(crc, (shift1>>8)&0xff);
203 crc = update_crc16(crc, (shift1>>16)&0xff);
204 crc = update_crc16(crc, (shift1>>24)&0xff);
205
206 Dbprintf("Info: Tag data: %x%08x, crc=%x",
207 (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF);
208 if (crc != (shift2&0xffff)) {
209 Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc);
210 } else {
211 DbpString("Info: CRC is good");
212 }
213 }
214 }
215
216
217
218 void WriteTIbyte(uint8_t b)
219 {
220 int i = 0;
221
222 // modulate 8 bits out to the antenna
223 for (i=0; i<8; i++)
224 {
225 if (b&(1<<i)) {
226 // stop modulating antenna
227 LOW(GPIO_SSC_DOUT);
228 SpinDelayUs(1000);
229 // modulate antenna
230 HIGH(GPIO_SSC_DOUT);
231 SpinDelayUs(1000);
232 } else {
233 // stop modulating antenna
234 LOW(GPIO_SSC_DOUT);
235 SpinDelayUs(300);
236 // modulate antenna
237 HIGH(GPIO_SSC_DOUT);
238 SpinDelayUs(1700);
239 }
240 }
241 }
242
243 void AcquireTiType(void)
244 {
245 int i, j, n;
246 // tag transmission is <20ms, sampling at 2M gives us 40K samples max
247 // each sample is 1 bit stuffed into a uint32_t so we need 1250 uint32_t
248 #define TIBUFLEN 1250
249
250 // clear buffer
251 uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr();
252 memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t));
253
254 // Set up the synchronous serial port
255 AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
256 AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
257
258 // steal this pin from the SSP and use it to control the modulation
259 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
260 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
261
262 AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
263 AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
264
265 // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
266 // 48/2 = 24 MHz clock must be divided by 12
267 AT91C_BASE_SSC->SSC_CMR = 12;
268
269 AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
270 AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
271 AT91C_BASE_SSC->SSC_TCMR = 0;
272 AT91C_BASE_SSC->SSC_TFMR = 0;
273
274 LED_D_ON();
275
276 // modulate antenna
277 HIGH(GPIO_SSC_DOUT);
278
279 // Charge TI tag for 50ms.
280 SpinDelay(50);
281
282 // stop modulating antenna and listen
283 LOW(GPIO_SSC_DOUT);
284
285 LED_D_OFF();
286
287 i = 0;
288 for(;;) {
289 if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
290 BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer
291 i++; if(i >= TIBUFLEN) break;
292 }
293 WDT_HIT();
294 }
295
296 // return stolen pin to SSP
297 AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
298 AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
299
300 char *dest = (char *)BigBuf_get_addr();
301 n = TIBUFLEN*32;
302 // unpack buffer
303 for (i=TIBUFLEN-1; i>=0; i--) {
304 for (j=0; j<32; j++) {
305 if(BigBuf[i] & (1 << j)) {
306 dest[--n] = 1;
307 } else {
308 dest[--n] = -1;
309 }
310 }
311 }
312 }
313
314
315
316
317 // arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc
318 // if crc provided, it will be written with the data verbatim (even if bogus)
319 // if not provided a valid crc will be computed from the data and written.
320 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
321 {
322
323
324 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
325 if(crc == 0) {
326 crc = update_crc16(crc, (idlo)&0xff);
327 crc = update_crc16(crc, (idlo>>8)&0xff);
328 crc = update_crc16(crc, (idlo>>16)&0xff);
329 crc = update_crc16(crc, (idlo>>24)&0xff);
330 crc = update_crc16(crc, (idhi)&0xff);
331 crc = update_crc16(crc, (idhi>>8)&0xff);
332 crc = update_crc16(crc, (idhi>>16)&0xff);
333 crc = update_crc16(crc, (idhi>>24)&0xff);
334 }
335 Dbprintf("Writing to tag: %x%08x, crc=%x",
336 (unsigned int) idhi, (unsigned int) idlo, crc);
337
338 // TI tags charge at 134.2Khz
339 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
340 // Place FPGA in passthrough mode, in this mode the CROSS_LO line
341 // connects to SSP_DIN and the SSP_DOUT logic level controls
342 // whether we're modulating the antenna (high)
343 // or listening to the antenna (low)
344 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
345 LED_A_ON();
346
347 // steal this pin from the SSP and use it to control the modulation
348 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
349 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
350
351 // writing algorithm:
352 // a high bit consists of a field off for 1ms and field on for 1ms
353 // a low bit consists of a field off for 0.3ms and field on for 1.7ms
354 // initiate a charge time of 50ms (field on) then immediately start writing bits
355 // start by writing 0xBB (keyword) and 0xEB (password)
356 // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer)
357 // finally end with 0x0300 (write frame)
358 // all data is sent lsb firts
359 // finish with 15ms programming time
360
361 // modulate antenna
362 HIGH(GPIO_SSC_DOUT);
363 SpinDelay(50); // charge time
364
365 WriteTIbyte(0xbb); // keyword
366 WriteTIbyte(0xeb); // password
367 WriteTIbyte( (idlo )&0xff );
368 WriteTIbyte( (idlo>>8 )&0xff );
369 WriteTIbyte( (idlo>>16)&0xff );
370 WriteTIbyte( (idlo>>24)&0xff );
371 WriteTIbyte( (idhi )&0xff );
372 WriteTIbyte( (idhi>>8 )&0xff );
373 WriteTIbyte( (idhi>>16)&0xff );
374 WriteTIbyte( (idhi>>24)&0xff ); // data hi to lo
375 WriteTIbyte( (crc )&0xff ); // crc lo
376 WriteTIbyte( (crc>>8 )&0xff ); // crc hi
377 WriteTIbyte(0x00); // write frame lo
378 WriteTIbyte(0x03); // write frame hi
379 HIGH(GPIO_SSC_DOUT);
380 SpinDelay(50); // programming time
381
382 LED_A_OFF();
383
384 // get TI tag data into the buffer
385 AcquireTiType();
386
387 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
388 DbpString("Now use tiread to check");
389 }
390
391 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
392 {
393 int i;
394 uint8_t *tab = BigBuf_get_addr();
395
396 FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
397 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
398
399 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
400
401 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
402 AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
403
404 #define SHORT_COIL() LOW(GPIO_SSC_DOUT)
405 #define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
406
407 i = 0;
408 for(;;) {
409 //wait until SSC_CLK goes HIGH
410 while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
411 if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
412 DbpString("Stopped");
413 return;
414 }
415 WDT_HIT();
416 }
417 if (ledcontrol)
418 LED_D_ON();
419
420 if(tab[i])
421 OPEN_COIL();
422 else
423 SHORT_COIL();
424
425 if (ledcontrol)
426 LED_D_OFF();
427 //wait until SSC_CLK goes LOW
428 while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
429 if(BUTTON_PRESS()) {
430 DbpString("Stopped");
431 return;
432 }
433 WDT_HIT();
434 }
435
436 i++;
437 if(i == period) {
438
439 i = 0;
440 if (gap) {
441 SHORT_COIL();
442 SpinDelayUs(gap);
443 }
444 }
445 }
446 }
447
448 #define DEBUG_FRAME_CONTENTS 1
449 void SimulateTagLowFrequencyBidir(int divisor, int t0)
450 {
451 }
452
453 // compose fc/8 fc/10 waveform (FSK2)
454 static void fc(int c, int *n)
455 {
456 uint8_t *dest = BigBuf_get_addr();
457 int idx;
458
459 // for when we want an fc8 pattern every 4 logical bits
460 if(c==0) {
461 dest[((*n)++)]=1;
462 dest[((*n)++)]=1;
463 dest[((*n)++)]=1;
464 dest[((*n)++)]=1;
465 dest[((*n)++)]=0;
466 dest[((*n)++)]=0;
467 dest[((*n)++)]=0;
468 dest[((*n)++)]=0;
469 }
470
471 // an fc/8 encoded bit is a bit pattern of 11110000 x6 = 48 samples
472 if(c==8) {
473 for (idx=0; idx<6; idx++) {
474 dest[((*n)++)]=1;
475 dest[((*n)++)]=1;
476 dest[((*n)++)]=1;
477 dest[((*n)++)]=1;
478 dest[((*n)++)]=0;
479 dest[((*n)++)]=0;
480 dest[((*n)++)]=0;
481 dest[((*n)++)]=0;
482 }
483 }
484
485 // an fc/10 encoded bit is a bit pattern of 1111100000 x5 = 50 samples
486 if(c==10) {
487 for (idx=0; idx<5; idx++) {
488 dest[((*n)++)]=1;
489 dest[((*n)++)]=1;
490 dest[((*n)++)]=1;
491 dest[((*n)++)]=1;
492 dest[((*n)++)]=1;
493 dest[((*n)++)]=0;
494 dest[((*n)++)]=0;
495 dest[((*n)++)]=0;
496 dest[((*n)++)]=0;
497 dest[((*n)++)]=0;
498 }
499 }
500 }
501 // compose fc/X fc/Y waveform (FSKx)
502 static void fcAll(uint8_t fc, int *n, uint8_t clock, uint16_t *modCnt)
503 {
504 uint8_t *dest = BigBuf_get_addr();
505 uint8_t halfFC = fc/2;
506 uint8_t wavesPerClock = clock/fc;
507 uint8_t mod = clock % fc; //modifier
508 uint8_t modAdj = fc/mod; //how often to apply modifier
509 bool modAdjOk = !(fc % mod); //if (fc % mod==0) modAdjOk=TRUE;
510 // loop through clock - step field clock
511 for (uint8_t idx=0; idx < wavesPerClock; idx++){
512 // put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
513 memset(dest+(*n), 0, fc-halfFC); //in case of odd number use extra here
514 memset(dest+(*n)+(fc-halfFC), 1, halfFC);
515 *n += fc;
516 }
517 if (mod>0) (*modCnt)++;
518 if ((mod>0) && modAdjOk){ //fsk2
519 if ((*modCnt % modAdj) == 0){ //if 4th 8 length wave in a rf/50 add extra 8 length wave
520 memset(dest+(*n), 0, fc-halfFC);
521 memset(dest+(*n)+(fc-halfFC), 1, halfFC);
522 *n += fc;
523 }
524 }
525 if (mod>0 && !modAdjOk){ //fsk1
526 memset(dest+(*n), 0, mod-(mod/2));
527 memset(dest+(*n)+(mod-(mod/2)), 1, mod/2);
528 *n += mod;
529 }
530 }
531
532 // prepare a waveform pattern in the buffer based on the ID given then
533 // simulate a HID tag until the button is pressed
534 void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
535 {
536 int n=0, i=0;
537 /*
538 HID tag bitstream format
539 The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits
540 A 1 bit is represented as 6 fc8 and 5 fc10 patterns
541 A 0 bit is represented as 5 fc10 and 6 fc8 patterns
542 A fc8 is inserted before every 4 bits
543 A special start of frame pattern is used consisting a0b0 where a and b are neither 0
544 nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10)
545 */
546
547 if (hi>0xFFF) {
548 DbpString("Tags can only have 44 bits. - USE lf simfsk for larger tags");
549 return;
550 }
551 fc(0,&n);
552 // special start of frame marker containing invalid bit sequences
553 fc(8, &n); fc(8, &n); // invalid
554 fc(8, &n); fc(10, &n); // logical 0
555 fc(10, &n); fc(10, &n); // invalid
556 fc(8, &n); fc(10, &n); // logical 0
557
558 WDT_HIT();
559 // manchester encode bits 43 to 32
560 for (i=11; i>=0; i--) {
561 if ((i%4)==3) fc(0,&n);
562 if ((hi>>i)&1) {
563 fc(10, &n); fc(8, &n); // low-high transition
564 } else {
565 fc(8, &n); fc(10, &n); // high-low transition
566 }
567 }
568
569 WDT_HIT();
570 // manchester encode bits 31 to 0
571 for (i=31; i>=0; i--) {
572 if ((i%4)==3) fc(0,&n);
573 if ((lo>>i)&1) {
574 fc(10, &n); fc(8, &n); // low-high transition
575 } else {
576 fc(8, &n); fc(10, &n); // high-low transition
577 }
578 }
579
580 if (ledcontrol)
581 LED_A_ON();
582 SimulateTagLowFrequency(n, 0, ledcontrol);
583
584 if (ledcontrol)
585 LED_A_OFF();
586 }
587
588 // prepare a waveform pattern in the buffer based on the ID given then
589 // simulate a FSK tag until the button is pressed
590 // arg1 contains fcHigh and fcLow, arg2 contains invert and clock
591 void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
592 {
593 int ledcontrol=1;
594 int n=0, i=0;
595 uint8_t fcHigh = arg1 >> 8;
596 uint8_t fcLow = arg1 & 0xFF;
597 uint16_t modCnt = 0;
598 uint8_t clk = arg2 & 0xFF;
599 uint8_t invert = (arg2 >> 8) & 1;
600
601 for (i=0; i<size; i++){
602 if (BitStream[i] == invert){
603 fcAll(fcLow, &n, clk, &modCnt);
604 } else {
605 fcAll(fcHigh, &n, clk, &modCnt);
606 }
607 }
608 Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n);
609 /*Dbprintf("DEBUG: First 32:");
610 uint8_t *dest = BigBuf_get_addr();
611 i=0;
612 Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
613 i+=16;
614 Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
615 */
616 if (ledcontrol)
617 LED_A_ON();
618
619 SimulateTagLowFrequency(n, 0, ledcontrol);
620
621 if (ledcontrol)
622 LED_A_OFF();
623 }
624
625 // compose ask waveform for one bit(ASK)
626 static void askSimBit(uint8_t c, int *n, uint8_t clock, uint8_t manchester)
627 {
628 uint8_t *dest = BigBuf_get_addr();
629 uint8_t halfClk = clock/2;
630 // c = current bit 1 or 0
631 if (manchester==1){
632 memset(dest+(*n), c, halfClk);
633 memset(dest+(*n) + halfClk, c^1, halfClk);
634 } else {
635 memset(dest+(*n), c, clock);
636 }
637 *n += clock;
638 }
639
640 static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase)
641 {
642 uint8_t *dest = BigBuf_get_addr();
643 uint8_t halfClk = clock/2;
644 if (c){
645 memset(dest+(*n), c ^ 1 ^ *phase, halfClk);
646 memset(dest+(*n) + halfClk, c ^ *phase, halfClk);
647 } else {
648 memset(dest+(*n), c ^ *phase, clock);
649 *phase ^= 1;
650 }
651
652 }
653
654 // args clock, ask/man or askraw, invert, transmission separator
655 void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
656 {
657 int ledcontrol = 1;
658 int n=0, i=0;
659 uint8_t clk = (arg1 >> 8) & 0xFF;
660 uint8_t encoding = arg1 & 0xFF;
661 uint8_t separator = arg2 & 1;
662 uint8_t invert = (arg2 >> 8) & 1;
663
664 if (encoding==2){ //biphase
665 uint8_t phase=0;
666 for (i=0; i<size; i++){
667 biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
668 }
669 if (BitStream[0]==BitStream[size-1]){ //run a second set inverted to keep phase in check
670 for (i=0; i<size; i++){
671 biphaseSimBit(BitStream[i]^invert, &n, clk, &phase);
672 }
673 }
674 } else { // ask/manchester || ask/raw
675 for (i=0; i<size; i++){
676 askSimBit(BitStream[i]^invert, &n, clk, encoding);
677 }
678 if (encoding==0 && BitStream[0]==BitStream[size-1]){ //run a second set inverted (for biphase phase)
679 for (i=0; i<size; i++){
680 askSimBit(BitStream[i]^invert^1, &n, clk, encoding);
681 }
682 }
683 }
684
685 if (separator==1) Dbprintf("sorry but separator option not yet available");
686
687 Dbprintf("Simulating with clk: %d, invert: %d, encoding: %d, separator: %d, n: %d",clk, invert, encoding, separator, n);
688 //DEBUG
689 //Dbprintf("First 32:");
690 //uint8_t *dest = BigBuf_get_addr();
691 //i=0;
692 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
693 //i+=16;
694 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
695
696 if (ledcontrol)
697 LED_A_ON();
698
699 SimulateTagLowFrequency(n, 0, ledcontrol);
700
701 if (ledcontrol)
702 LED_A_OFF();
703 }
704
705 //carrier can be 2,4 or 8
706 static void pskSimBit(uint8_t waveLen, int *n, uint8_t clk, uint8_t *curPhase, bool phaseChg)
707 {
708 uint8_t *dest = BigBuf_get_addr();
709 uint8_t halfWave = waveLen/2;
710 //uint8_t idx;
711 int i = 0;
712 if (phaseChg){
713 // write phase change
714 memset(dest+(*n), *curPhase^1, halfWave);
715 memset(dest+(*n) + halfWave, *curPhase, halfWave);
716 *n += waveLen;
717 *curPhase ^= 1;
718 i += waveLen;
719 }
720 //write each normal clock wave for the clock duration
721 for (; i < clk; i+=waveLen){
722 memset(dest+(*n), *curPhase, halfWave);
723 memset(dest+(*n) + halfWave, *curPhase^1, halfWave);
724 *n += waveLen;
725 }
726 }
727
728 // args clock, carrier, invert,
729 void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
730 {
731 int ledcontrol=1;
732 int n=0, i=0;
733 uint8_t clk = arg1 >> 8;
734 uint8_t carrier = arg1 & 0xFF;
735 uint8_t invert = arg2 & 0xFF;
736 uint8_t curPhase = 0;
737 for (i=0; i<size; i++){
738 if (BitStream[i] == curPhase){
739 pskSimBit(carrier, &n, clk, &curPhase, FALSE);
740 } else {
741 pskSimBit(carrier, &n, clk, &curPhase, TRUE);
742 }
743 }
744 Dbprintf("Simulating with Carrier: %d, clk: %d, invert: %d, n: %d",carrier, clk, invert, n);
745 //Dbprintf("DEBUG: First 32:");
746 //uint8_t *dest = BigBuf_get_addr();
747 //i=0;
748 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
749 //i+=16;
750 //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
751
752 if (ledcontrol)
753 LED_A_ON();
754 SimulateTagLowFrequency(n, 0, ledcontrol);
755
756 if (ledcontrol)
757 LED_A_OFF();
758 }
759
760 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
761 void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
762 {
763 uint8_t *dest = BigBuf_get_addr();
764 //const size_t sizeOfBigBuff = BigBuf_max_traceLen();
765 size_t size;
766 uint32_t hi2=0, hi=0, lo=0;
767 int idx=0;
768 // Configure to go in 125Khz listen mode
769 LFSetupFPGAForADC(95, true);
770
771 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
772
773 WDT_HIT();
774 if (ledcontrol) LED_A_ON();
775
776 DoAcquisition_default(-1,true);
777 // FSK demodulator
778 //size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use
779 size = 50*128*2; //big enough to catch 2 sequences of largest format
780 idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
781
782 if (idx>0 && lo>0 && (size==96 || size==192)){
783 // go over previously decoded manchester data and decode into usable tag ID
784 if (hi2 != 0){ //extra large HID tags 88/192 bits
785 Dbprintf("TAG ID: %x%08x%08x (%d)",
786 (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
787 }else { //standard HID tags 44/96 bits
788 //Dbprintf("TAG ID: %x%08x (%d)",(unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF); //old print cmd
789 uint8_t bitlen = 0;
790 uint32_t fc = 0;
791 uint32_t cardnum = 0;
792 if (((hi>>5)&1) == 1){//if bit 38 is set then < 37 bit format is used
793 uint32_t lo2=0;
794 lo2=(((hi & 31) << 12) | (lo>>20)); //get bits 21-37 to check for format len bit
795 uint8_t idx3 = 1;
796 while(lo2 > 1){ //find last bit set to 1 (format len bit)
797 lo2=lo2 >> 1;
798 idx3++;
799 }
800 bitlen = idx3+19;
801 fc =0;
802 cardnum=0;
803 if(bitlen == 26){
804 cardnum = (lo>>1)&0xFFFF;
805 fc = (lo>>17)&0xFF;
806 }
807 if(bitlen == 37){
808 cardnum = (lo>>1)&0x7FFFF;
809 fc = ((hi&0xF)<<12)|(lo>>20);
810 }
811 if(bitlen == 34){
812 cardnum = (lo>>1)&0xFFFF;
813 fc= ((hi&1)<<15)|(lo>>17);
814 }
815 if(bitlen == 35){
816 cardnum = (lo>>1)&0xFFFFF;
817 fc = ((hi&1)<<11)|(lo>>21);
818 }
819 }
820 else { //if bit 38 is not set then 37 bit format is used
821 bitlen= 37;
822 fc =0;
823 cardnum=0;
824 if(bitlen==37){
825 cardnum = (lo>>1)&0x7FFFF;
826 fc = ((hi&0xF)<<12)|(lo>>20);
827 }
828 }
829 //Dbprintf("TAG ID: %x%08x (%d)",
830 // (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
831 Dbprintf("TAG ID: %x%08x (%d) - Format Len: %dbit - FC: %d - Card: %d",
832 (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF,
833 (unsigned int) bitlen, (unsigned int) fc, (unsigned int) cardnum);
834 }
835 if (findone){
836 if (ledcontrol) LED_A_OFF();
837 *high = hi;
838 *low = lo;
839 return;
840 }
841 // reset
842 }
843 hi2 = hi = lo = idx = 0;
844 WDT_HIT();
845 }
846 DbpString("Stopped");
847 if (ledcontrol) LED_A_OFF();
848 }
849
850 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
851 void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
852 {
853 uint8_t *dest = BigBuf_get_addr();
854 //const size_t sizeOfBigBuff = BigBuf_max_traceLen();
855 size_t size;
856 int idx=0;
857 // Configure to go in 125Khz listen mode
858 LFSetupFPGAForADC(95, true);
859
860 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
861
862 WDT_HIT();
863 if (ledcontrol) LED_A_ON();
864
865 DoAcquisition_default(-1,true);
866 // FSK demodulator
867 //size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use
868 size = 50*128*2; //big enough to catch 2 sequences of largest format
869 idx = AWIDdemodFSK(dest, &size);
870
871 if (idx>0 && size==96){
872 // Index map
873 // 0 10 20 30 40 50 60
874 // | | | | | | |
875 // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96
876 // -----------------------------------------------------------------------------
877 // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1
878 // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96
879 // |---26 bit---| |-----117----||-------------142-------------|
880 // b = format bit len, o = odd parity of last 3 bits
881 // f = facility code, c = card number
882 // w = wiegand parity
883 // (26 bit format shown)
884
885 //get raw ID before removing parities
886 uint32_t rawLo = bytebits_to_byte(dest+idx+64,32);
887 uint32_t rawHi = bytebits_to_byte(dest+idx+32,32);
888 uint32_t rawHi2 = bytebits_to_byte(dest+idx,32);
889
890 size = removeParity(dest, idx+8, 4, 1, 88);
891 // ok valid card found!
892
893 // Index map
894 // 0 10 20 30 40 50 60
895 // | | | | | | |
896 // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456
897 // -----------------------------------------------------------------------------
898 // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000
899 // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
900 // |26 bit| |-117--| |-----142------|
901 // b = format bit len, o = odd parity of last 3 bits
902 // f = facility code, c = card number
903 // w = wiegand parity
904 // (26 bit format shown)
905
906 uint32_t fc = 0;
907 uint32_t cardnum = 0;
908 uint32_t code1 = 0;
909 uint32_t code2 = 0;
910 uint8_t fmtLen = bytebits_to_byte(dest,8);
911 if (fmtLen==26){
912 fc = bytebits_to_byte(dest+9, 8);
913 cardnum = bytebits_to_byte(dest+17, 16);
914 code1 = bytebits_to_byte(dest+8,fmtLen);
915 Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo);
916 } else {
917 cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16);
918 if (fmtLen>32){
919 code1 = bytebits_to_byte(dest+8,fmtLen-32);
920 code2 = bytebits_to_byte(dest+8+(fmtLen-32),32);
921 Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo);
922 } else{
923 code1 = bytebits_to_byte(dest+8,fmtLen);
924 Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo);
925 }
926 }
927 if (findone){
928 if (ledcontrol) LED_A_OFF();
929 return;
930 }
931 // reset
932 }
933 idx = 0;
934 WDT_HIT();
935 }
936 DbpString("Stopped");
937 if (ledcontrol) LED_A_OFF();
938 }
939
940 void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
941 {
942 uint8_t *dest = BigBuf_get_addr();
943
944 size_t size=0, idx=0;
945 int clk=0, invert=0, errCnt=0, maxErr=20;
946 uint32_t hi=0;
947 uint64_t lo=0;
948 // Configure to go in 125Khz listen mode
949 LFSetupFPGAForADC(95, true);
950
951 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
952
953 WDT_HIT();
954 if (ledcontrol) LED_A_ON();
955
956 DoAcquisition_default(-1,true);
957 size = BigBuf_max_traceLen();
958 //askdemod and manchester decode
959 if (size > 16385) size = 16385; //big enough to catch 2 sequences of largest format
960 errCnt = askdemod(dest, &size, &clk, &invert, maxErr, 0, 1);
961 WDT_HIT();
962
963 if (errCnt<0) continue;
964
965 errCnt = Em410xDecode(dest, &size, &idx, &hi, &lo);
966 if (errCnt){
967 if (size>64){
968 Dbprintf("EM XL TAG ID: %06x%08x%08x - (%05d_%03d_%08d)",
969 hi,
970 (uint32_t)(lo>>32),
971 (uint32_t)lo,
972 (uint32_t)(lo&0xFFFF),
973 (uint32_t)((lo>>16LL) & 0xFF),
974 (uint32_t)(lo & 0xFFFFFF));
975 } else {
976 Dbprintf("EM TAG ID: %02x%08x - (%05d_%03d_%08d)",
977 (uint32_t)(lo>>32),
978 (uint32_t)lo,
979 (uint32_t)(lo&0xFFFF),
980 (uint32_t)((lo>>16LL) & 0xFF),
981 (uint32_t)(lo & 0xFFFFFF));
982 }
983
984 if (findone){
985 if (ledcontrol) LED_A_OFF();
986 *high=lo>>32;
987 *low=lo & 0xFFFFFFFF;
988 return;
989 }
990 }
991 WDT_HIT();
992 hi = lo = size = idx = 0;
993 clk = invert = errCnt = 0;
994 }
995 DbpString("Stopped");
996 if (ledcontrol) LED_A_OFF();
997 }
998
999 void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
1000 {
1001 uint8_t *dest = BigBuf_get_addr();
1002 int idx=0;
1003 uint32_t code=0, code2=0;
1004 uint8_t version=0;
1005 uint8_t facilitycode=0;
1006 uint16_t number=0;
1007 // Configure to go in 125Khz listen mode
1008 LFSetupFPGAForADC(95, true);
1009
1010 while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
1011 WDT_HIT();
1012 if (ledcontrol) LED_A_ON();
1013 DoAcquisition_default(-1,true);
1014 //fskdemod and get start index
1015 WDT_HIT();
1016 idx = IOdemodFSK(dest, BigBuf_max_traceLen());
1017 if (idx<0) continue;
1018 //valid tag found
1019
1020 //Index map
1021 //0 10 20 30 40 50 60
1022 //| | | | | | |
1023 //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
1024 //-----------------------------------------------------------------------------
1025 //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
1026 //
1027 //XSF(version)facility:codeone+codetwo
1028 //Handle the data
1029 if(findone){ //only print binary if we are doing one
1030 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx], dest[idx+1], dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7],dest[idx+8]);
1031 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15],dest[idx+16],dest[idx+17]);
1032 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23],dest[idx+24],dest[idx+25],dest[idx+26]);
1033 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31],dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35]);
1034 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39],dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44]);
1035 Dbprintf("%d%d%d%d%d%d%d%d %d",dest[idx+45],dest[idx+46],dest[idx+47],dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53]);
1036 Dbprintf("%d%d%d%d%d%d%d%d %d%d",dest[idx+54],dest[idx+55],dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
1037 }
1038 code = bytebits_to_byte(dest+idx,32);
1039 code2 = bytebits_to_byte(dest+idx+32,32);
1040 version = bytebits_to_byte(dest+idx+27,8); //14,4
1041 facilitycode = bytebits_to_byte(dest+idx+18,8);
1042 number = (bytebits_to_byte(dest+idx+36,8)<<8)|(bytebits_to_byte(dest+idx+45,8)); //36,9
1043
1044 Dbprintf("XSF(%02d)%02x:%05d (%08x%08x)",version,facilitycode,number,code,code2);
1045 // if we're only looking for one tag
1046 if (findone){
1047 if (ledcontrol) LED_A_OFF();
1048 //LED_A_OFF();
1049 *high=code;
1050 *low=code2;
1051 return;
1052 }
1053 code=code2=0;
1054 version=facilitycode=0;
1055 number=0;
1056 idx=0;
1057
1058 WDT_HIT();
1059 }
1060 DbpString("Stopped");
1061 if (ledcontrol) LED_A_OFF();
1062 }
1063
1064 /*------------------------------
1065 * T5555/T5557/T5567 routines
1066 *------------------------------
1067 */
1068
1069 /* T55x7 configuration register definitions */
1070 #define T55x7_POR_DELAY 0x00000001
1071 #define T55x7_ST_TERMINATOR 0x00000008
1072 #define T55x7_PWD 0x00000010
1073 #define T55x7_MAXBLOCK_SHIFT 5
1074 #define T55x7_AOR 0x00000200
1075 #define T55x7_PSKCF_RF_2 0
1076 #define T55x7_PSKCF_RF_4 0x00000400
1077 #define T55x7_PSKCF_RF_8 0x00000800
1078 #define T55x7_MODULATION_DIRECT 0
1079 #define T55x7_MODULATION_PSK1 0x00001000
1080 #define T55x7_MODULATION_PSK2 0x00002000
1081 #define T55x7_MODULATION_PSK3 0x00003000
1082 #define T55x7_MODULATION_FSK1 0x00004000
1083 #define T55x7_MODULATION_FSK2 0x00005000
1084 #define T55x7_MODULATION_FSK1a 0x00006000
1085 #define T55x7_MODULATION_FSK2a 0x00007000
1086 #define T55x7_MODULATION_MANCHESTER 0x00008000
1087 #define T55x7_MODULATION_BIPHASE 0x00010000
1088 #define T55x7_MODULATION_DIPHASE 0x00018000
1089 #define T55x7_BITRATE_RF_8 0
1090 #define T55x7_BITRATE_RF_16 0x00040000
1091 #define T55x7_BITRATE_RF_32 0x00080000
1092 #define T55x7_BITRATE_RF_40 0x000C0000
1093 #define T55x7_BITRATE_RF_50 0x00100000
1094 #define T55x7_BITRATE_RF_64 0x00140000
1095 #define T55x7_BITRATE_RF_100 0x00180000
1096 #define T55x7_BITRATE_RF_128 0x001C0000
1097
1098 /* T5555 (Q5) configuration register definitions */
1099 #define T5555_ST_TERMINATOR 0x00000001
1100 #define T5555_MAXBLOCK_SHIFT 0x00000001
1101 #define T5555_MODULATION_MANCHESTER 0
1102 #define T5555_MODULATION_PSK1 0x00000010
1103 #define T5555_MODULATION_PSK2 0x00000020
1104 #define T5555_MODULATION_PSK3 0x00000030
1105 #define T5555_MODULATION_FSK1 0x00000040
1106 #define T5555_MODULATION_FSK2 0x00000050
1107 #define T5555_MODULATION_BIPHASE 0x00000060
1108 #define T5555_MODULATION_DIRECT 0x00000070
1109 #define T5555_INVERT_OUTPUT 0x00000080
1110 #define T5555_PSK_RF_2 0
1111 #define T5555_PSK_RF_4 0x00000100
1112 #define T5555_PSK_RF_8 0x00000200
1113 #define T5555_USE_PWD 0x00000400
1114 #define T5555_USE_AOR 0x00000800
1115 #define T5555_BITRATE_SHIFT 12
1116 #define T5555_FAST_WRITE 0x00004000
1117 #define T5555_PAGE_SELECT 0x00008000
1118
1119 /*
1120 * Relevant times in microsecond
1121 * To compensate antenna falling times shorten the write times
1122 * and enlarge the gap ones.
1123 * Q5 tags seems to have issues when these values changes.
1124 */
1125 #define START_GAP 31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc)
1126 #define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc)
1127 #define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
1128 #define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550
1129 #define READ_GAP 52*8
1130
1131 // VALUES TAKEN FROM EM4x function: SendForward
1132 // START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle)
1133 // WRITE_GAP = 128; (16*8)
1134 // WRITE_1 = 256 32*8; (32*8)
1135
1136 // These timings work for 4469/4269/4305 (with the 55*8 above)
1137 // WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8);
1138
1139 // Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
1140 // TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz
1141 // Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier)
1142 // T0 = TIMER_CLOCK1 / 125000 = 192
1143 // 1 Cycle = 8 microseconds(us) == 1 field clock
1144
1145 void TurnReadLFOn(int delay) {
1146 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
1147 // Give it a bit of time for the resonant antenna to settle.
1148 SpinDelayUs(delay); //155*8 //50*8
1149 }
1150
1151 // Write one bit to card
1152 void T55xxWriteBit(int bit) {
1153 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
1154 if (!bit)
1155 SpinDelayUs(WRITE_0);
1156 else
1157 SpinDelayUs(WRITE_1);
1158 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1159 SpinDelayUs(WRITE_GAP);
1160 }
1161
1162 // Write one card block in page 0, no lock
1163 void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) {
1164 LED_A_ON();
1165 bool PwdMode = arg & 0x1;
1166 uint8_t Page = (arg & 0x2)>>1;
1167 uint32_t i = 0;
1168
1169 // Set up FPGA, 125kHz
1170 LFSetupFPGAForADC(95, true);
1171
1172 // Trigger T55x7 in mode.
1173 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1174 SpinDelayUs(START_GAP);
1175
1176 // Opcode 10
1177 T55xxWriteBit(1);
1178 T55xxWriteBit(Page); //Page 0
1179 if (PwdMode){
1180 // Send Pwd
1181 for (i = 0x80000000; i != 0; i >>= 1)
1182 T55xxWriteBit(Pwd & i);
1183 }
1184 // Send Lock bit
1185 T55xxWriteBit(0);
1186
1187 // Send Data
1188 for (i = 0x80000000; i != 0; i >>= 1)
1189 T55xxWriteBit(Data & i);
1190
1191 // Send Block number
1192 for (i = 0x04; i != 0; i >>= 1)
1193 T55xxWriteBit(Block & i);
1194
1195 // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
1196 // so wait a little more)
1197 TurnReadLFOn(20 * 1000);
1198 //could attempt to do a read to confirm write took
1199 // as the tag should repeat back the new block
1200 // until it is reset, but to confirm it we would
1201 // need to know the current block 0 config mode
1202
1203 // turn field off
1204 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1205 cmd_send(CMD_ACK,0,0,0,0,0);
1206 LED_A_OFF();
1207 }
1208
1209 // Read one card block in page 0
1210 void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
1211 LED_A_ON();
1212 bool PwdMode = arg0 & 0x1;
1213 uint8_t Page = (arg0 & 0x2) >> 1;
1214 uint32_t i = 0;
1215 bool RegReadMode = (Block == 0xFF);
1216
1217 //clear buffer now so it does not interfere with timing later
1218 BigBuf_Clear_ext(false);
1219
1220 //make sure block is at max 7
1221 Block &= 0x7;
1222
1223 // Set up FPGA, 125kHz to power up the tag
1224 LFSetupFPGAForADC(95, true);
1225
1226 // Trigger T55x7 Direct Access Mode with start gap
1227 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1228 SpinDelayUs(START_GAP);
1229
1230 // Opcode 10
1231 T55xxWriteBit(1);
1232 T55xxWriteBit(Page); //Page 0
1233
1234 if (PwdMode){
1235 // Send Pwd
1236 for (i = 0x80000000; i != 0; i >>= 1)
1237 T55xxWriteBit(Pwd & i);
1238 }
1239 // Send a zero bit separation
1240 T55xxWriteBit(0);
1241
1242 // Send Block number (if direct access mode)
1243 if (!RegReadMode)
1244 for (i = 0x04; i != 0; i >>= 1)
1245 T55xxWriteBit(Block & i);
1246
1247 // Turn field on to read the response
1248 TurnReadLFOn(READ_GAP);
1249
1250 // Acquisition
1251 doT55x7Acquisition();
1252
1253 // Turn the field off
1254 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1255 cmd_send(CMD_ACK,0,0,0,0,0);
1256 LED_A_OFF();
1257 }
1258
1259 /*
1260 // Read card traceability data (page 1)
1261 void T55xxReadTrace(void){
1262 LED_A_ON();
1263
1264 //clear buffer now so it does not interfere with timing later
1265 BigBuf_Clear_ext(false);
1266
1267 // Set up FPGA, 125kHz
1268 LFSetupFPGAForADC(95, true);
1269
1270 // Trigger T55x7 Direct Access Mode
1271 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1272 SpinDelayUs(START_GAP);
1273
1274 // Opcode 11
1275 T55xxWriteBit(1);
1276 T55xxWriteBit(1); //Page 1
1277
1278 // Turn field on to read the response
1279 TurnReadLFOn(READ_GAP);
1280
1281 // Acquisition
1282 doT55x7Acquisition();
1283
1284 // Turn the field off
1285 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1286 cmd_send(CMD_ACK,0,0,0,0,0);
1287 LED_A_OFF();
1288 }
1289 */
1290 void T55xxWakeUp(uint32_t Pwd){
1291 LED_B_ON();
1292 uint32_t i = 0;
1293
1294 // Set up FPGA, 125kHz
1295 LFSetupFPGAForADC(95, true);
1296
1297 // Trigger T55x7 Direct Access Mode
1298 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
1299 SpinDelayUs(START_GAP);
1300
1301 // Opcode 10
1302 T55xxWriteBit(1);
1303 T55xxWriteBit(0); //Page 0
1304
1305 // Send Pwd
1306 for (i = 0x80000000; i != 0; i >>= 1)
1307 T55xxWriteBit(Pwd & i);
1308
1309 // Turn and leave field on to let the begin repeating transmission
1310 TurnReadLFOn(20*1000);
1311 }
1312
1313 /*-------------- Cloning routines -----------*/
1314 // Copy HID id to card and setup block 0 config
1315 void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
1316 {
1317 int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format
1318 int last_block = 0;
1319
1320 if (longFMT){
1321 // Ensure no more than 84 bits supplied
1322 if (hi2>0xFFFFF) {
1323 DbpString("Tags can only have 84 bits.");
1324 return;
1325 }
1326 // Build the 6 data blocks for supplied 84bit ID
1327 last_block = 6;
1328 data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded)
1329 for (int i=0;i<4;i++) {
1330 if (hi2 & (1<<(19-i)))
1331 data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10
1332 else
1333 data1 |= (1<<((3-i)*2)); // 0 -> 01
1334 }
1335
1336 data2 = 0;
1337 for (int i=0;i<16;i++) {
1338 if (hi2 & (1<<(15-i)))
1339 data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1340 else
1341 data2 |= (1<<((15-i)*2)); // 0 -> 01
1342 }
1343
1344 data3 = 0;
1345 for (int i=0;i<16;i++) {
1346 if (hi & (1<<(31-i)))
1347 data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1348 else
1349 data3 |= (1<<((15-i)*2)); // 0 -> 01
1350 }
1351
1352 data4 = 0;
1353 for (int i=0;i<16;i++) {
1354 if (hi & (1<<(15-i)))
1355 data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1356 else
1357 data4 |= (1<<((15-i)*2)); // 0 -> 01
1358 }
1359
1360 data5 = 0;
1361 for (int i=0;i<16;i++) {
1362 if (lo & (1<<(31-i)))
1363 data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1364 else
1365 data5 |= (1<<((15-i)*2)); // 0 -> 01
1366 }
1367
1368 data6 = 0;
1369 for (int i=0;i<16;i++) {
1370 if (lo & (1<<(15-i)))
1371 data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1372 else
1373 data6 |= (1<<((15-i)*2)); // 0 -> 01
1374 }
1375 }
1376 else {
1377 // Ensure no more than 44 bits supplied
1378 if (hi>0xFFF) {
1379 DbpString("Tags can only have 44 bits.");
1380 return;
1381 }
1382
1383 // Build the 3 data blocks for supplied 44bit ID
1384 last_block = 3;
1385
1386 data1 = 0x1D000000; // load preamble
1387
1388 for (int i=0;i<12;i++) {
1389 if (hi & (1<<(11-i)))
1390 data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
1391 else
1392 data1 |= (1<<((11-i)*2)); // 0 -> 01
1393 }
1394
1395 data2 = 0;
1396 for (int i=0;i<16;i++) {
1397 if (lo & (1<<(31-i)))
1398 data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1399 else
1400 data2 |= (1<<((15-i)*2)); // 0 -> 01
1401 }
1402
1403 data3 = 0;
1404 for (int i=0;i<16;i++) {
1405 if (lo & (1<<(15-i)))
1406 data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
1407 else
1408 data3 |= (1<<((15-i)*2)); // 0 -> 01
1409 }
1410 }
1411
1412 LED_D_ON();
1413 // Program the data blocks for supplied ID
1414 // and the block 0 for HID format
1415 T55xxWriteBlock(data1,1,0,0);
1416 T55xxWriteBlock(data2,2,0,0);
1417 T55xxWriteBlock(data3,3,0,0);
1418
1419 if (longFMT) { // if long format there are 6 blocks
1420 T55xxWriteBlock(data4,4,0,0);
1421 T55xxWriteBlock(data5,5,0,0);
1422 T55xxWriteBlock(data6,6,0,0);
1423 }
1424
1425 // Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long)
1426 T55xxWriteBlock(T55x7_BITRATE_RF_50 |
1427 T55x7_MODULATION_FSK2a |
1428 last_block << T55x7_MAXBLOCK_SHIFT,
1429 0,0,0);
1430
1431 LED_D_OFF();
1432
1433 DbpString("DONE!");
1434 }
1435
1436 void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
1437 {
1438 int data1=0, data2=0; //up to six blocks for long format
1439
1440 data1 = hi; // load preamble
1441 data2 = lo;
1442
1443 LED_D_ON();
1444 // Program the data blocks for supplied ID
1445 // and the block 0 for HID format
1446 T55xxWriteBlock(data1,1,0,0);
1447 T55xxWriteBlock(data2,2,0,0);
1448
1449 //Config Block
1450 T55xxWriteBlock(0x00147040,0,0,0);
1451 LED_D_OFF();
1452
1453 DbpString("DONE!");
1454 }
1455
1456 // Define 9bit header for EM410x tags
1457 #define EM410X_HEADER 0x1FF
1458 #define EM410X_ID_LENGTH 40
1459
1460 void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
1461 {
1462 int i, id_bit;
1463 uint64_t id = EM410X_HEADER;
1464 uint64_t rev_id = 0; // reversed ID
1465 int c_parity[4]; // column parity
1466 int r_parity = 0; // row parity
1467 uint32_t clock = 0;
1468
1469 // Reverse ID bits given as parameter (for simpler operations)
1470 for (i = 0; i < EM410X_ID_LENGTH; ++i) {
1471 if (i < 32) {
1472 rev_id = (rev_id << 1) | (id_lo & 1);
1473 id_lo >>= 1;
1474 } else {
1475 rev_id = (rev_id << 1) | (id_hi & 1);
1476 id_hi >>= 1;
1477 }
1478 }
1479
1480 for (i = 0; i < EM410X_ID_LENGTH; ++i) {
1481 id_bit = rev_id & 1;
1482
1483 if (i % 4 == 0) {
1484 // Don't write row parity bit at start of parsing
1485 if (i)
1486 id = (id << 1) | r_parity;
1487 // Start counting parity for new row
1488 r_parity = id_bit;
1489 } else {
1490 // Count row parity
1491 r_parity ^= id_bit;
1492 }
1493
1494 // First elements in column?
1495 if (i < 4)
1496 // Fill out first elements
1497 c_parity[i] = id_bit;
1498 else
1499 // Count column parity
1500 c_parity[i % 4] ^= id_bit;
1501
1502 // Insert ID bit
1503 id = (id << 1) | id_bit;
1504 rev_id >>= 1;
1505 }
1506
1507 // Insert parity bit of last row
1508 id = (id << 1) | r_parity;
1509
1510 // Fill out column parity at the end of tag
1511 for (i = 0; i < 4; ++i)
1512 id = (id << 1) | c_parity[i];
1513
1514 // Add stop bit
1515 id <<= 1;
1516
1517 Dbprintf("Started writing %s tag ...", card ? "T55x7":"T5555");
1518 LED_D_ON();
1519
1520 // Write EM410x ID
1521 T55xxWriteBlock((uint32_t)(id >> 32), 1, 0, 0);
1522 T55xxWriteBlock((uint32_t)id, 2, 0, 0);
1523
1524 // Config for EM410x (RF/64, Manchester, Maxblock=2)
1525 if (card) {
1526 // Clock rate is stored in bits 8-15 of the card value
1527 clock = (card & 0xFF00) >> 8;
1528 Dbprintf("Clock rate: %d", clock);
1529 switch (clock) {
1530 case 50:
1531 clock = T55x7_BITRATE_RF_50;
1532 case 40:
1533 clock = T55x7_BITRATE_RF_40;
1534 case 32:
1535 clock = T55x7_BITRATE_RF_32;
1536 break;
1537 case 16:
1538 clock = T55x7_BITRATE_RF_16;
1539 break;
1540 case 0:
1541 // A value of 0 is assumed to be 64 for backwards-compatibility
1542 // Fall through...
1543 case 64:
1544 clock = T55x7_BITRATE_RF_64;
1545 break;
1546 default:
1547 Dbprintf("Invalid clock rate: %d", clock);
1548 return;
1549 }
1550
1551 // Writing configuration for T55x7 tag
1552 T55xxWriteBlock(clock |
1553 T55x7_MODULATION_MANCHESTER |
1554 2 << T55x7_MAXBLOCK_SHIFT,
1555 0, 0, 0);
1556 }
1557 else
1558 // Writing configuration for T5555(Q5) tag
1559 T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
1560 T5555_MODULATION_MANCHESTER |
1561 2 << T5555_MAXBLOCK_SHIFT,
1562 0, 0, 0);
1563
1564 LED_D_OFF();
1565 Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555",
1566 (uint32_t)(id >> 32), (uint32_t)id);
1567 }
1568
1569 // Clone Indala 64-bit tag by UID to T55x7
1570 void CopyIndala64toT55x7(int hi, int lo)
1571 {
1572
1573 //Program the 2 data blocks for supplied 64bit UID
1574 // and the block 0 for Indala64 format
1575 T55xxWriteBlock(hi,1,0,0);
1576 T55xxWriteBlock(lo,2,0,0);
1577 //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2)
1578 T55xxWriteBlock(T55x7_BITRATE_RF_32 |
1579 T55x7_MODULATION_PSK1 |
1580 2 << T55x7_MAXBLOCK_SHIFT,
1581 0, 0, 0);
1582 //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
1583 // T5567WriteBlock(0x603E1042,0);
1584
1585 DbpString("DONE!");
1586
1587 }
1588
1589 void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7)
1590 {
1591
1592 //Program the 7 data blocks for supplied 224bit UID
1593 // and the block 0 for Indala224 format
1594 T55xxWriteBlock(uid1,1,0,0);
1595 T55xxWriteBlock(uid2,2,0,0);
1596 T55xxWriteBlock(uid3,3,0,0);
1597 T55xxWriteBlock(uid4,4,0,0);
1598 T55xxWriteBlock(uid5,5,0,0);
1599 T55xxWriteBlock(uid6,6,0,0);
1600 T55xxWriteBlock(uid7,7,0,0);
1601 //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7)
1602 T55xxWriteBlock(T55x7_BITRATE_RF_32 |
1603 T55x7_MODULATION_PSK1 |
1604 7 << T55x7_MAXBLOCK_SHIFT,
1605 0,0,0);
1606 //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
1607 // T5567WriteBlock(0x603E10E2,0);
1608
1609 DbpString("DONE!");
1610
1611 }
1612
1613 //-----------------------------------
1614 // EM4469 / EM4305 routines
1615 //-----------------------------------
1616 #define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored
1617 #define FWD_CMD_WRITE 0xA
1618 #define FWD_CMD_READ 0x9
1619 #define FWD_CMD_DISABLE 0x5
1620
1621
1622 uint8_t forwardLink_data[64]; //array of forwarded bits
1623 uint8_t * forward_ptr; //ptr for forward message preparation
1624 uint8_t fwd_bit_sz; //forwardlink bit counter
1625 uint8_t * fwd_write_ptr; //forwardlink bit pointer
1626
1627 //====================================================================
1628 // prepares command bits
1629 // see EM4469 spec
1630 //====================================================================
1631 //--------------------------------------------------------------------
1632 uint8_t Prepare_Cmd( uint8_t cmd ) {
1633 //--------------------------------------------------------------------
1634
1635 *forward_ptr++ = 0; //start bit
1636 *forward_ptr++ = 0; //second pause for 4050 code
1637
1638 *forward_ptr++ = cmd;
1639 cmd >>= 1;
1640 *forward_ptr++ = cmd;
1641 cmd >>= 1;
1642 *forward_ptr++ = cmd;
1643 cmd >>= 1;
1644 *forward_ptr++ = cmd;
1645
1646 return 6; //return number of emited bits
1647 }
1648
1649 //====================================================================
1650 // prepares address bits
1651 // see EM4469 spec
1652 //====================================================================
1653
1654 //--------------------------------------------------------------------
1655 uint8_t Prepare_Addr( uint8_t addr ) {
1656 //--------------------------------------------------------------------
1657
1658 register uint8_t line_parity;
1659
1660 uint8_t i;
1661 line_parity = 0;
1662 for(i=0;i<6;i++) {
1663 *forward_ptr++ = addr;
1664 line_parity ^= addr;
1665 addr >>= 1;
1666 }
1667
1668 *forward_ptr++ = (line_parity & 1);
1669
1670 return 7; //return number of emited bits
1671 }
1672
1673 //====================================================================
1674 // prepares data bits intreleaved with parity bits
1675 // see EM4469 spec
1676 //====================================================================
1677
1678 //--------------------------------------------------------------------
1679 uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
1680 //--------------------------------------------------------------------
1681
1682 register uint8_t line_parity;
1683 register uint8_t column_parity;
1684 register uint8_t i, j;
1685 register uint16_t data;
1686
1687 data = data_low;
1688 column_parity = 0;
1689
1690 for(i=0; i<4; i++) {
1691 line_parity = 0;
1692 for(j=0; j<8; j++) {
1693 line_parity ^= data;
1694 column_parity ^= (data & 1) << j;
1695 *forward_ptr++ = data;
1696 data >>= 1;
1697 }
1698 *forward_ptr++ = line_parity;
1699 if(i == 1)
1700 data = data_hi;
1701 }
1702
1703 for(j=0; j<8; j++) {
1704 *forward_ptr++ = column_parity;
1705 column_parity >>= 1;
1706 }
1707 *forward_ptr = 0;
1708
1709 return 45; //return number of emited bits
1710 }
1711
1712 //====================================================================
1713 // Forward Link send function
1714 // Requires: forwarLink_data filled with valid bits (1 bit per byte)
1715 // fwd_bit_count set with number of bits to be sent
1716 //====================================================================
1717 void SendForward(uint8_t fwd_bit_count) {
1718
1719 fwd_write_ptr = forwardLink_data;
1720 fwd_bit_sz = fwd_bit_count;
1721
1722 LED_D_ON();
1723
1724 // Set up FPGA, 125kHz
1725 LFSetupFPGAForADC(95, true);
1726
1727 // force 1st mod pulse (start gap must be longer for 4305)
1728 fwd_bit_sz--; //prepare next bit modulation
1729 fwd_write_ptr++;
1730 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1731 SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
1732 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
1733 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
1734 SpinDelayUs(16*8); //16 cycles on (8us each)
1735
1736 // now start writting
1737 while(fwd_bit_sz-- > 0) { //prepare next bit modulation
1738 if(((*fwd_write_ptr++) & 1) == 1)
1739 SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
1740 else {
1741 //These timings work for 4469/4269/4305 (with the 55*8 above)
1742 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1743 SpinDelayUs(23*8); //16-4 cycles off (8us each)
1744 FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
1745 FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
1746 SpinDelayUs(9*8); //16 cycles on (8us each)
1747 }
1748 }
1749 }
1750
1751 void EM4xLogin(uint32_t Password) {
1752
1753 uint8_t fwd_bit_count;
1754
1755 forward_ptr = forwardLink_data;
1756 fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
1757 fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
1758
1759 SendForward(fwd_bit_count);
1760
1761 //Wait for command to complete
1762 SpinDelay(20);
1763
1764 }
1765
1766 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
1767
1768 uint8_t fwd_bit_count;
1769 uint8_t *dest = BigBuf_get_addr();
1770 uint16_t bufferlength = BigBuf_max_traceLen();
1771 uint32_t i = 0;
1772
1773 // Clear destination buffer before sending the command
1774 memset(dest, 0x80, bufferlength);
1775
1776 //If password mode do login
1777 if (PwdMode == 1) EM4xLogin(Pwd);
1778
1779 forward_ptr = forwardLink_data;
1780 fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
1781 fwd_bit_count += Prepare_Addr( Address );
1782
1783 // Connect the A/D to the peak-detected low-frequency path.
1784 SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
1785 // Now set up the SSC to get the ADC samples that are now streaming at us.
1786 FpgaSetupSsc();
1787
1788 SendForward(fwd_bit_count);
1789
1790 // Now do the acquisition
1791 i = 0;
1792 for(;;) {
1793 if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
1794 AT91C_BASE_SSC->SSC_THR = 0x43;
1795 }
1796 if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
1797 dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
1798 i++;
1799 if (i >= bufferlength) break;
1800 }
1801 }
1802 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1803 cmd_send(CMD_ACK,0,0,0,0,0);
1804 LED_D_OFF();
1805 }
1806
1807 void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
1808
1809 uint8_t fwd_bit_count;
1810
1811 //If password mode do login
1812 if (PwdMode == 1) EM4xLogin(Pwd);
1813
1814 forward_ptr = forwardLink_data;
1815 fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
1816 fwd_bit_count += Prepare_Addr( Address );
1817 fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
1818
1819 SendForward(fwd_bit_count);
1820
1821 //Wait for write to complete
1822 SpinDelay(20);
1823 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
1824 LED_D_OFF();
1825 }
Impressum, Datenschutz