]> git.zerfleddert.de Git - proxmark3-svn/blob - common/lfdemod.c
750dbf1b43a17bd1d2c011abde63f752748fff0e
[proxmark3-svn] / common / lfdemod.c
1 //-----------------------------------------------------------------------------
2 // Copyright (C) 2014
3 //
4 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
5 // at your option, any later version. See the LICENSE.txt file for the text of
6 // the license.
7 //-----------------------------------------------------------------------------
8 // Low frequency demod/decode commands - by marshmellow, holiman, iceman and
9 // many others who came before
10 //
11 // NOTES:
12 // LF Demod functions are placed here to allow the flexability to use client or
13 // device side. Most BUT NOT ALL of these functions are currenlty safe for
14 // device side use currently. (DetectST for example...)
15 //
16 // There are likely many improvements to the code that could be made, please
17 // make suggestions...
18 //
19 // we tried to include author comments so any questions could be directed to
20 // the source.
21 //
22 // There are 4 main sections of code below:
23 // Utilities Section:
24 // for general utilities used by multiple other functions
25 // Clock / Bitrate Detection Section:
26 // for clock detection functions for each modulation
27 // Modulation Demods &/or Decoding Section:
28 // for main general modulation demodulating and encoding decoding code.
29 // Tag format detection section:
30 // for detection of specific tag formats within demodulated data
31 //
32 // marshmellow
33 //-----------------------------------------------------------------------------
34
35 #include <string.h> // for memset, memcmp and size_t
36 #include <stdint.h> // for uint_32+
37 #include <stdbool.h> // for bool
38
39 //**********************************************************************************************
40 //---------------------------------Utilities Section--------------------------------------------
41 //**********************************************************************************************
42
43 //to allow debug print calls when used not on device
44 void dummy(char *fmt, ...){}
45 #ifndef ON_DEVICE
46 #include "ui.h"
47 #include "cmdparser.h"
48 #include "cmddata.h"
49 #define prnt PrintAndLog
50 #else
51 uint8_t g_debugMode=0;
52 #define prnt dummy
53 #endif
54
55 uint8_t justNoise(uint8_t *BitStream, size_t size) {
56 static const uint8_t THRESHOLD = 123;
57 //test samples are not just noise
58 uint8_t justNoise1 = 1;
59 for(size_t idx=0; idx < size && justNoise1 ;idx++){
60 justNoise1 = BitStream[idx] < THRESHOLD;
61 }
62 return justNoise1;
63 }
64
65 //by marshmellow
66 //get high and low values of a wave with passed in fuzz factor. also return noise test = 1 for passed or 0 for only noise
67 int getHiLo(uint8_t *BitStream, size_t size, int *high, int *low, uint8_t fuzzHi, uint8_t fuzzLo) {
68 *high=0;
69 *low=255;
70 // get high and low thresholds
71 for (size_t i=0; i < size; i++){
72 if (BitStream[i] > *high) *high = BitStream[i];
73 if (BitStream[i] < *low) *low = BitStream[i];
74 }
75 if (*high < 123) return -1; // just noise
76 *high = ((*high-128)*fuzzHi + 12800)/100;
77 *low = ((*low-128)*fuzzLo + 12800)/100;
78 return 1;
79 }
80
81 // by marshmellow
82 // pass bits to be tested in bits, length bits passed in bitLen, and parity type (even=0 | odd=1) in pType
83 // returns 1 if passed
84 uint8_t parityTest(uint32_t bits, uint8_t bitLen, uint8_t pType) {
85 uint8_t ans = 0;
86 for (uint8_t i = 0; i < bitLen; i++){
87 ans ^= ((bits >> i) & 1);
88 }
89 if (g_debugMode) prnt("DEBUG: ans: %d, ptype: %d, bits: %08X",ans,pType,bits);
90 return (ans == pType);
91 }
92
93 // by marshmellow
94 // takes a array of binary values, start position, length of bits per parity (includes parity bit),
95 // Parity Type (1 for odd; 0 for even; 2 for Always 1's; 3 for Always 0's), and binary Length (length to run)
96 size_t removeParity(uint8_t *BitStream, size_t startIdx, uint8_t pLen, uint8_t pType, size_t bLen) {
97 uint32_t parityWd = 0;
98 size_t j = 0, bitCnt = 0;
99 for (int word = 0; word < (bLen); word+=pLen) {
100 for (int bit=0; bit < pLen; bit++) {
101 parityWd = (parityWd << 1) | BitStream[startIdx+word+bit];
102 BitStream[j++] = (BitStream[startIdx+word+bit]);
103 }
104 if (word+pLen > bLen) break;
105
106 j--; // overwrite parity with next data
107 // if parity fails then return 0
108 switch (pType) {
109 case 3: if (BitStream[j]==1) {return 0;} break; //should be 0 spacer bit
110 case 2: if (BitStream[j]==0) {return 0;} break; //should be 1 spacer bit
111 default: if (parityTest(parityWd, pLen, pType) == 0) {return 0;} break; //test parity
112 }
113 bitCnt+=(pLen-1);
114 parityWd = 0;
115 }
116 // if we got here then all the parities passed
117 //return ID start index and size
118 return bitCnt;
119 }
120
121 // by marshmellow
122 // takes a array of binary values, length of bits per parity (includes parity bit),
123 // Parity Type (1 for odd; 0 for even; 2 Always 1's; 3 Always 0's), and binary Length (length to run)
124 // Make sure *dest is long enough to store original sourceLen + #_of_parities_to_be_added
125 size_t addParity(uint8_t *BitSource, uint8_t *dest, uint8_t sourceLen, uint8_t pLen, uint8_t pType) {
126 uint32_t parityWd = 0;
127 size_t j = 0, bitCnt = 0;
128 for (int word = 0; word < sourceLen; word+=pLen-1) {
129 for (int bit=0; bit < pLen-1; bit++){
130 parityWd = (parityWd << 1) | BitSource[word+bit];
131 dest[j++] = (BitSource[word+bit]);
132 }
133 // if parity fails then return 0
134 switch (pType) {
135 case 3: dest[j++]=0; break; // marker bit which should be a 0
136 case 2: dest[j++]=1; break; // marker bit which should be a 1
137 default:
138 dest[j++] = parityTest(parityWd, pLen-1, pType) ^ 1;
139 break;
140 }
141 bitCnt += pLen;
142 parityWd = 0;
143 }
144 // if we got here then all the parities passed
145 //return ID start index and size
146 return bitCnt;
147 }
148
149 uint32_t bytebits_to_byte(uint8_t *src, size_t numbits) {
150 uint32_t num = 0;
151 for(int i = 0 ; i < numbits ; i++)
152 {
153 num = (num << 1) | (*src);
154 src++;
155 }
156 return num;
157 }
158
159 //least significant bit first
160 uint32_t bytebits_to_byteLSBF(uint8_t *src, size_t numbits) {
161 uint32_t num = 0;
162 for(int i = 0 ; i < numbits ; i++)
163 {
164 num = (num << 1) | *(src + (numbits-(i+1)));
165 }
166 return num;
167 }
168
169 // search for given preamble in given BitStream and return success=1 or fail=0 and startIndex (where it was found) and length if not fineone
170 // fineone does not look for a repeating preamble for em4x05/4x69 sends preamble once, so look for it once in the first pLen bits
171 bool preambleSearchEx(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx, bool findone) {
172 // Sanity check. If preamble length is bigger than bitstream length.
173 if ( *size <= pLen ) return false;
174
175 uint8_t foundCnt = 0;
176 for (size_t idx = 0; idx < *size - pLen; idx++) {
177 if (memcmp(BitStream+idx, preamble, pLen) == 0) {
178 //first index found
179 foundCnt++;
180 if (foundCnt == 1) {
181 if (g_debugMode) prnt("DEBUG: preamble found at %u", idx);
182 *startIdx = idx;
183 if (findone) return true;
184 } else if (foundCnt == 2) {
185 *size = idx - *startIdx;
186 return true;
187 }
188 }
189 }
190 return false;
191 }
192
193 //by marshmellow
194 //search for given preamble in given BitStream and return success=1 or fail=0 and startIndex and length
195 uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx) {
196 return (preambleSearchEx(BitStream, preamble, pLen, size, startIdx, false)) ? 1 : 0;
197 }
198
199 // find start of modulating data (for fsk and psk) in case of beginning noise or slow chip startup.
200 size_t findModStart(uint8_t dest[], size_t size, uint8_t threshold_value, uint8_t expWaveSize) {
201 size_t i = 0;
202 size_t waveSizeCnt = 0;
203 uint8_t thresholdCnt = 0;
204 bool isAboveThreshold = dest[i++] >= threshold_value;
205 for (; i < size-20; i++ ) {
206 if(dest[i] < threshold_value && isAboveThreshold) {
207 thresholdCnt++;
208 if (thresholdCnt > 2 && waveSizeCnt < expWaveSize+1) break;
209 isAboveThreshold = false;
210 waveSizeCnt = 0;
211 } else if (dest[i] >= threshold_value && !isAboveThreshold) {
212 thresholdCnt++;
213 if (thresholdCnt > 2 && waveSizeCnt < expWaveSize+1) break;
214 isAboveThreshold = true;
215 waveSizeCnt = 0;
216 } else {
217 waveSizeCnt++;
218 }
219 if (thresholdCnt > 10) break;
220 }
221 if (g_debugMode == 2) prnt("DEBUG: threshold Count reached at %u, count: %u",i, thresholdCnt);
222 return i;
223 }
224
225 //by marshmellow
226 //amplify based on ask edge detection - not accurate enough to use all the time
227 void askAmp(uint8_t *BitStream, size_t size) {
228 uint8_t Last = 128;
229 for(size_t i = 1; i<size; i++){
230 if (BitStream[i]-BitStream[i-1]>=30) //large jump up
231 Last = 255;
232 else if(BitStream[i-1]-BitStream[i]>=20) //large jump down
233 Last = 0;
234
235 BitStream[i-1] = Last;
236 }
237 return;
238 }
239
240 uint32_t manchesterEncode2Bytes(uint16_t datain) {
241 uint32_t output = 0;
242 uint8_t curBit = 0;
243 for (uint8_t i=0; i<16; i++) {
244 curBit = (datain >> (15-i) & 1);
245 output |= (1<<(((15-i)*2)+curBit));
246 }
247 return output;
248 }
249
250 //by marshmellow
251 //encode binary data into binary manchester
252 //NOTE: BitStream must have double the size available in memory to do the swap
253 int ManchesterEncode(uint8_t *BitStream, size_t size) {
254 size_t modIdx=size, i=0;
255 if (size>modIdx) return -1;
256 for (size_t idx=0; idx < size; idx++){
257 BitStream[idx+modIdx++] = BitStream[idx];
258 BitStream[idx+modIdx++] = BitStream[idx]^1;
259 }
260 for (; i<(size*2); i++){
261 BitStream[i] = BitStream[i+size];
262 }
263 return i;
264 }
265
266 // by marshmellow
267 // to detect a wave that has heavily clipped (clean) samples
268 uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, uint8_t high, uint8_t low) {
269 bool allArePeaks = true;
270 uint16_t cntPeaks=0;
271 size_t loopEnd = 512+160;
272 if (loopEnd > size) loopEnd = size;
273 for (size_t i=160; i<loopEnd; i++){
274 if (dest[i]>low && dest[i]<high)
275 allArePeaks = false;
276 else
277 cntPeaks++;
278 }
279 if (!allArePeaks){
280 if (cntPeaks > 300) return true;
281 }
282 return allArePeaks;
283 }
284
285 //**********************************************************************************************
286 //-------------------Clock / Bitrate Detection Section------------------------------------------
287 //**********************************************************************************************
288
289 // by marshmellow
290 // to help detect clocks on heavily clipped samples
291 // based on count of low to low
292 int DetectStrongAskClock(uint8_t dest[], size_t size, uint8_t high, uint8_t low, int *clock) {
293 uint8_t fndClk[] = {8,16,32,40,50,64,128};
294 size_t startwave;
295 size_t i = 100;
296 size_t minClk = 255;
297 int shortestWaveIdx = 0;
298 // get to first full low to prime loop and skip incomplete first pulse
299 while ((dest[i] < high) && (i < size))
300 ++i;
301 while ((dest[i] > low) && (i < size))
302 ++i;
303
304 // loop through all samples
305 while (i < size) {
306 // measure from low to low
307 while ((dest[i] > low) && (i < size))
308 ++i;
309 startwave = i;
310 while ((dest[i] < high) && (i < size))
311 ++i;
312 while ((dest[i] > low) && (i < size))
313 ++i;
314 //get minimum measured distance
315 if (i-startwave < minClk && i < size) {
316 minClk = i - startwave;
317 shortestWaveIdx = startwave;
318 }
319 }
320 // set clock
321 if (g_debugMode==2) prnt("DEBUG ASK: detectstrongASKclk smallest wave: %d",minClk);
322 for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
323 if (minClk >= fndClk[clkCnt]-(fndClk[clkCnt]/8) && minClk <= fndClk[clkCnt]+1) {
324 *clock = fndClk[clkCnt];
325 return shortestWaveIdx;
326 }
327 }
328 return 0;
329 }
330
331 // by marshmellow
332 // not perfect especially with lower clocks or VERY good antennas (heavy wave clipping)
333 // maybe somehow adjust peak trimming value based on samples to fix?
334 // return start index of best starting position for that clock and return clock (by reference)
335 int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr) {
336 size_t i=1;
337 uint8_t clk[] = {255,8,16,32,40,50,64,100,128,255};
338 uint8_t clkEnd = 9;
339 uint8_t loopCnt = 255; //don't need to loop through entire array...
340 if (size <= loopCnt+60) return -1; //not enough samples
341 size -= 60; //sometimes there is a strange end wave - filter out this....
342 //if we already have a valid clock
343 uint8_t clockFnd=0;
344 for (;i<clkEnd;++i)
345 if (clk[i] == *clock) clockFnd = i;
346 //clock found but continue to find best startpos
347
348 //get high and low peak
349 int peak, low;
350 if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return -1;
351
352 //test for large clean peaks
353 if (!clockFnd){
354 if (DetectCleanAskWave(dest, size, peak, low)==1){
355 int ans = DetectStrongAskClock(dest, size, peak, low, clock);
356 if (g_debugMode==2) prnt("DEBUG ASK: detectaskclk Clean Ask Wave Detected: clk %i, ShortestWave: %i",clock, ans);
357 if (ans > 0) {
358 return ans; //return shortest wave start position
359 }
360 }
361 }
362 uint8_t ii;
363 uint8_t clkCnt, tol = 0;
364 uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
365 uint8_t bestStart[]={0,0,0,0,0,0,0,0,0};
366 size_t errCnt = 0;
367 size_t arrLoc, loopEnd;
368
369 if (clockFnd>0) {
370 clkCnt = clockFnd;
371 clkEnd = clockFnd+1;
372 }
373 else clkCnt=1;
374
375 //test each valid clock from smallest to greatest to see which lines up
376 for(; clkCnt < clkEnd; clkCnt++){
377 if (clk[clkCnt] <= 32){
378 tol=1;
379 }else{
380 tol=0;
381 }
382 //if no errors allowed - keep start within the first clock
383 if (!maxErr && size > clk[clkCnt]*2 + tol && clk[clkCnt]<128) loopCnt=clk[clkCnt]*2;
384 bestErr[clkCnt]=1000;
385 //try lining up the peaks by moving starting point (try first few clocks)
386 for (ii=0; ii < loopCnt; ii++){
387 if (dest[ii] < peak && dest[ii] > low) continue;
388
389 errCnt=0;
390 // now that we have the first one lined up test rest of wave array
391 loopEnd = ((size-ii-tol) / clk[clkCnt]) - 1;
392 for (i=0; i < loopEnd; ++i){
393 arrLoc = ii + (i * clk[clkCnt]);
394 if (dest[arrLoc] >= peak || dest[arrLoc] <= low){
395 }else if (dest[arrLoc-tol] >= peak || dest[arrLoc-tol] <= low){
396 }else if (dest[arrLoc+tol] >= peak || dest[arrLoc+tol] <= low){
397 }else{ //error no peak detected
398 errCnt++;
399 }
400 }
401 //if we found no errors then we can stop here and a low clock (common clocks)
402 // this is correct one - return this clock
403 if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, err %d, startpos %d, endpos %d",clk[clkCnt],errCnt,ii,i);
404 if(errCnt==0 && clkCnt<7) {
405 if (!clockFnd) *clock = clk[clkCnt];
406 return ii;
407 }
408 //if we found errors see if it is lowest so far and save it as best run
409 if(errCnt<bestErr[clkCnt]){
410 bestErr[clkCnt]=errCnt;
411 bestStart[clkCnt]=ii;
412 }
413 }
414 }
415 uint8_t iii;
416 uint8_t best=0;
417 for (iii=1; iii<clkEnd; ++iii){
418 if (bestErr[iii] < bestErr[best]){
419 if (bestErr[iii] == 0) bestErr[iii]=1;
420 // current best bit to error ratio vs new bit to error ratio
421 if ( (size/clk[best])/bestErr[best] < (size/clk[iii])/bestErr[iii] ){
422 best = iii;
423 }
424 }
425 if (g_debugMode == 2) prnt("DEBUG ASK: clk %d, # Errors %d, Current Best Clk %d, bestStart %d",clk[iii],bestErr[iii],clk[best],bestStart[best]);
426 }
427 if (!clockFnd) *clock = clk[best];
428 return bestStart[best];
429 }
430
431 int DetectStrongNRZClk(uint8_t *dest, size_t size, int peak, int low){
432 //find shortest transition from high to low
433 size_t i = 0;
434 size_t transition1 = 0;
435 int lowestTransition = 255;
436 bool lastWasHigh = false;
437
438 //find first valid beginning of a high or low wave
439 while ((dest[i] >= peak || dest[i] <= low) && (i < size))
440 ++i;
441 while ((dest[i] < peak && dest[i] > low) && (i < size))
442 ++i;
443 lastWasHigh = (dest[i] >= peak);
444
445 if (i==size) return 0;
446 transition1 = i;
447
448 for (;i < size; i++) {
449 if ((dest[i] >= peak && !lastWasHigh) || (dest[i] <= low && lastWasHigh)) {
450 lastWasHigh = (dest[i] >= peak);
451 if (i-transition1 < lowestTransition) lowestTransition = i-transition1;
452 transition1 = i;
453 }
454 }
455 if (lowestTransition == 255) lowestTransition = 0;
456 if (g_debugMode==2) prnt("DEBUG NRZ: detectstrongNRZclk smallest wave: %d",lowestTransition);
457 return lowestTransition;
458 }
459
460 //by marshmellow
461 //detect nrz clock by reading #peaks vs no peaks(or errors)
462 int DetectNRZClock_ext(uint8_t dest[], size_t size, int clock, size_t *clockStartIdx) {
463 size_t i=0;
464 uint8_t clk[]={8,16,32,40,50,64,100,128,255};
465 size_t loopCnt = 4096; //don't need to loop through entire array...
466 if (size == 0) return 0;
467 if (size<loopCnt) loopCnt = size-20;
468 //if we already have a valid clock quit
469 for (; i < 8; ++i)
470 if (clk[i] == clock) return clock;
471
472 //get high and low peak
473 int peak, low;
474 if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return 0;
475
476 int lowestTransition = DetectStrongNRZClk(dest, size-20, peak, low);
477 size_t ii;
478 uint8_t clkCnt;
479 uint8_t tol = 0;
480 uint16_t smplCnt = 0;
481 int16_t peakcnt = 0;
482 int16_t peaksdet[] = {0,0,0,0,0,0,0,0};
483 uint16_t maxPeak = 255;
484 bool firstpeak = false;
485 //test for large clipped waves
486 for (i=0; i<loopCnt; i++){
487 if (dest[i] >= peak || dest[i] <= low){
488 if (!firstpeak) continue;
489 smplCnt++;
490 } else {
491 firstpeak=true;
492 if (smplCnt > 6 ){
493 if (maxPeak > smplCnt){
494 maxPeak = smplCnt;
495 //prnt("maxPk: %d",maxPeak);
496 }
497 peakcnt++;
498 //prnt("maxPk: %d, smplCnt: %d, peakcnt: %d",maxPeak,smplCnt,peakcnt);
499 smplCnt=0;
500 }
501 }
502 }
503 bool errBitHigh = 0;
504 bool bitHigh = 0;
505 uint8_t ignoreCnt = 0;
506 uint8_t ignoreWindow = 4;
507 bool lastPeakHigh = 0;
508 int lastBit = 0;
509 size_t bestStart[]={0,0,0,0,0,0,0,0,0};
510 peakcnt=0;
511 //test each valid clock from smallest to greatest to see which lines up
512 for(clkCnt=0; clkCnt < 8; ++clkCnt){
513 //ignore clocks smaller than smallest peak
514 if (clk[clkCnt] < maxPeak - (clk[clkCnt]/4)) continue;
515 //try lining up the peaks by moving starting point (try first 256)
516 for (ii=20; ii < loopCnt; ++ii){
517 if ((dest[ii] >= peak) || (dest[ii] <= low)){
518 peakcnt = 0;
519 bitHigh = false;
520 ignoreCnt = 0;
521 lastBit = ii-clk[clkCnt];
522 //loop through to see if this start location works
523 for (i = ii; i < size-20; ++i) {
524 //if we are at a clock bit
525 if ((i >= lastBit + clk[clkCnt] - tol) && (i <= lastBit + clk[clkCnt] + tol)) {
526 //test high/low
527 if (dest[i] >= peak || dest[i] <= low) {
528 //if same peak don't count it
529 if ((dest[i] >= peak && !lastPeakHigh) || (dest[i] <= low && lastPeakHigh)) {
530 peakcnt++;
531 }
532 lastPeakHigh = (dest[i] >= peak);
533 bitHigh = true;
534 errBitHigh = false;
535 ignoreCnt = ignoreWindow;
536 lastBit += clk[clkCnt];
537 } else if (i == lastBit + clk[clkCnt] + tol) {
538 lastBit += clk[clkCnt];
539 }
540 //else if not a clock bit and no peaks
541 } else if (dest[i] < peak && dest[i] > low){
542 if (ignoreCnt==0){
543 bitHigh=false;
544 if (errBitHigh==true) peakcnt--;
545 errBitHigh=false;
546 } else {
547 ignoreCnt--;
548 }
549 // else if not a clock bit but we have a peak
550 } else if ((dest[i]>=peak || dest[i]<=low) && (!bitHigh)) {
551 //error bar found no clock...
552 errBitHigh=true;
553 }
554 }
555 if(peakcnt>peaksdet[clkCnt]) {
556 bestStart[clkCnt]=ii;
557 peaksdet[clkCnt]=peakcnt;
558 }
559 }
560 }
561 }
562 int iii=7;
563 uint8_t best=0;
564 for (iii=7; iii > 0; iii--){
565 if ((peaksdet[iii] >= (peaksdet[best]-1)) && (peaksdet[iii] <= peaksdet[best]+1) && lowestTransition) {
566 if (clk[iii] > (lowestTransition - (clk[iii]/8)) && clk[iii] < (lowestTransition + (clk[iii]/8))) {
567 best = iii;
568 }
569 } else if (peaksdet[iii] > peaksdet[best]){
570 best = iii;
571 }
572 if (g_debugMode==2) prnt("DEBUG NRZ: Clk: %d, peaks: %d, maxPeak: %d, bestClk: %d, lowestTrs: %d",clk[iii],peaksdet[iii],maxPeak, clk[best], lowestTransition);
573 }
574 *clockStartIdx = bestStart[best];
575 return clk[best];
576 }
577
578 int DetectNRZClock(uint8_t dest[], size_t size, int clock) {
579 size_t bestStart=0;
580 return DetectNRZClock_ext(dest, size, clock, &bestStart);
581 }
582
583 //by marshmellow
584 //countFC is to detect the field clock lengths.
585 //counts and returns the 2 most common wave lengths
586 //mainly used for FSK field clock detection
587 uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj) {
588 uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
589 uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
590 uint8_t fcLensFnd = 0;
591 uint8_t lastFCcnt = 0;
592 uint8_t fcCounter = 0;
593 size_t i;
594 if (size < 180) return 0;
595
596 // prime i to first up transition
597 for (i = 160; i < size-20; i++)
598 if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
599 break;
600
601 for (; i < size-20; i++){
602 if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
603 // new up transition
604 fcCounter++;
605 if (fskAdj){
606 //if we had 5 and now have 9 then go back to 8 (for when we get a fc 9 instead of an 8)
607 if (lastFCcnt==5 && fcCounter==9) fcCounter--;
608 //if fc=9 or 4 add one (for when we get a fc 9 instead of 10 or a 4 instead of a 5)
609 if ((fcCounter==9) || fcCounter==4) fcCounter++;
610 // save last field clock count (fc/xx)
611 lastFCcnt = fcCounter;
612 }
613 // find which fcLens to save it to:
614 for (int ii=0; ii<15; ii++){
615 if (fcLens[ii]==fcCounter){
616 fcCnts[ii]++;
617 fcCounter=0;
618 break;
619 }
620 }
621 if (fcCounter>0 && fcLensFnd<15){
622 //add new fc length
623 fcCnts[fcLensFnd]++;
624 fcLens[fcLensFnd++]=fcCounter;
625 }
626 fcCounter=0;
627 } else {
628 // count sample
629 fcCounter++;
630 }
631 }
632
633 uint8_t best1=14, best2=14, best3=14;
634 uint16_t maxCnt1=0;
635 // go through fclens and find which ones are bigest 2
636 for (i=0; i<15; i++){
637 // get the 3 best FC values
638 if (fcCnts[i]>maxCnt1) {
639 best3=best2;
640 best2=best1;
641 maxCnt1=fcCnts[i];
642 best1=i;
643 } else if(fcCnts[i]>fcCnts[best2]){
644 best3=best2;
645 best2=i;
646 } else if(fcCnts[i]>fcCnts[best3]){
647 best3=i;
648 }
649 if (g_debugMode==2) prnt("DEBUG countfc: FC %u, Cnt %u, best fc: %u, best2 fc: %u",fcLens[i],fcCnts[i],fcLens[best1],fcLens[best2]);
650 }
651 if (fcLens[best1]==0) return 0;
652 uint8_t fcH=0, fcL=0;
653 if (fcLens[best1]>fcLens[best2]){
654 fcH=fcLens[best1];
655 fcL=fcLens[best2];
656 } else{
657 fcH=fcLens[best2];
658 fcL=fcLens[best1];
659 }
660 if ((size-180)/fcH/3 > fcCnts[best1]+fcCnts[best2]) {
661 if (g_debugMode==2) prnt("DEBUG countfc: fc is too large: %u > %u. Not psk or fsk",(size-180)/fcH/3,fcCnts[best1]+fcCnts[best2]);
662 return 0; //lots of waves not psk or fsk
663 }
664 // TODO: take top 3 answers and compare to known Field clocks to get top 2
665
666 uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
667 if (fskAdj) return fcs;
668 return fcLens[best1];
669 }
670
671 //by marshmellow
672 //detect psk clock by reading each phase shift
673 // a phase shift is determined by measuring the sample length of each wave
674 int DetectPSKClock_ext(uint8_t dest[], size_t size, int clock, int *firstPhaseShift) {
675 uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
676 uint16_t loopCnt = 4096; //don't need to loop through entire array...
677 if (size == 0) return 0;
678 if (size<loopCnt) loopCnt = size-20;
679
680 //if we already have a valid clock quit
681 size_t i=1;
682 for (; i < 8; ++i)
683 if (clk[i] == clock) return clock;
684
685 size_t waveStart=0, waveEnd=0, firstFullWave=0, lastClkBit=0;
686 uint8_t clkCnt, fc=0, fullWaveLen=0, tol=1;
687 uint16_t peakcnt=0, errCnt=0, waveLenCnt=0;
688 uint16_t bestErr[]={1000,1000,1000,1000,1000,1000,1000,1000,1000};
689 uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
690 fc = countFC(dest, size, 0);
691 if (fc!=2 && fc!=4 && fc!=8) return -1;
692 if (g_debugMode==2) prnt("DEBUG PSK: FC: %d",fc);
693
694 //find first full wave
695 for (i=160; i<loopCnt; i++){
696 if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
697 if (waveStart == 0) {
698 waveStart = i+1;
699 //prnt("DEBUG: waveStart: %d",waveStart);
700 } else {
701 waveEnd = i+1;
702 //prnt("DEBUG: waveEnd: %d",waveEnd);
703 waveLenCnt = waveEnd-waveStart;
704 if (waveLenCnt > fc){
705 firstFullWave = waveStart;
706 fullWaveLen=waveLenCnt;
707 break;
708 }
709 waveStart=0;
710 }
711 }
712 }
713 *firstPhaseShift = firstFullWave;
714 if (g_debugMode ==2) prnt("DEBUG PSK: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
715 //test each valid clock from greatest to smallest to see which lines up
716 for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
717 lastClkBit = firstFullWave; //set end of wave as clock align
718 waveStart = 0;
719 errCnt=0;
720 peakcnt=0;
721 if (g_debugMode == 2) prnt("DEBUG PSK: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
722
723 for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
724 //top edge of wave = start of new wave
725 if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
726 if (waveStart == 0) {
727 waveStart = i+1;
728 waveLenCnt=0;
729 } else { //waveEnd
730 waveEnd = i+1;
731 waveLenCnt = waveEnd-waveStart;
732 if (waveLenCnt > fc){
733 //if this wave is a phase shift
734 if (g_debugMode == 2) prnt("DEBUG PSK: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,i+1,fc);
735 if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
736 peakcnt++;
737 lastClkBit+=clk[clkCnt];
738 } else if (i<lastClkBit+8){
739 //noise after a phase shift - ignore
740 } else { //phase shift before supposed to based on clock
741 errCnt++;
742 }
743 } else if (i+1 > lastClkBit + clk[clkCnt] + tol + fc){
744 lastClkBit+=clk[clkCnt]; //no phase shift but clock bit
745 }
746 waveStart=i+1;
747 }
748 }
749 }
750 if (errCnt == 0){
751 return clk[clkCnt];
752 }
753 if (errCnt <= bestErr[clkCnt]) bestErr[clkCnt]=errCnt;
754 if (peakcnt > peaksdet[clkCnt]) peaksdet[clkCnt]=peakcnt;
755 }
756 //all tested with errors
757 //return the highest clk with the most peaks found
758 uint8_t best=7;
759 for (i=7; i>=1; i--){
760 if (peaksdet[i] > peaksdet[best]) {
761 best = i;
762 }
763 if (g_debugMode == 2) prnt("DEBUG PSK: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[i],peaksdet[i],bestErr[i],clk[best]);
764 }
765 return clk[best];
766 }
767
768 int DetectPSKClock(uint8_t dest[], size_t size, int clock) {
769 int firstPhaseShift = 0;
770 return DetectPSKClock_ext(dest, size, clock, &firstPhaseShift);
771 }
772
773 //by marshmellow
774 //detects the bit clock for FSK given the high and low Field Clocks
775 uint8_t detectFSKClk_ext(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow, int *firstClockEdge) {
776 uint8_t clk[] = {8,16,32,40,50,64,100,128,0};
777 uint16_t rfLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
778 uint8_t rfCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
779 uint8_t rfLensFnd = 0;
780 uint8_t lastFCcnt = 0;
781 uint16_t fcCounter = 0;
782 uint16_t rfCounter = 0;
783 uint8_t firstBitFnd = 0;
784 size_t i;
785 if (size == 0) return 0;
786
787 uint8_t fcTol = ((fcHigh*100 - fcLow*100)/2 + 50)/100; //(uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
788 rfLensFnd=0;
789 fcCounter=0;
790 rfCounter=0;
791 firstBitFnd=0;
792 //PrintAndLog("DEBUG: fcTol: %d",fcTol);
793 // prime i to first peak / up transition
794 for (i = 160; i < size-20; i++)
795 if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
796 break;
797
798 for (; i < size-20; i++){
799 fcCounter++;
800 rfCounter++;
801
802 if (BitStream[i] <= BitStream[i-1] || BitStream[i] < BitStream[i+1])
803 continue;
804 // else new peak
805 // if we got less than the small fc + tolerance then set it to the small fc
806 // if it is inbetween set it to the last counter
807 if (fcCounter < fcHigh && fcCounter > fcLow)
808 fcCounter = lastFCcnt;
809 else if (fcCounter < fcLow+fcTol)
810 fcCounter = fcLow;
811 else //set it to the large fc
812 fcCounter = fcHigh;
813
814 //look for bit clock (rf/xx)
815 if ((fcCounter < lastFCcnt || fcCounter > lastFCcnt)){
816 //not the same size as the last wave - start of new bit sequence
817 if (firstBitFnd > 1){ //skip first wave change - probably not a complete bit
818 for (int ii=0; ii<15; ii++){
819 if (rfLens[ii] >= (rfCounter-4) && rfLens[ii] <= (rfCounter+4)){
820 rfCnts[ii]++;
821 rfCounter = 0;
822 break;
823 }
824 }
825 if (rfCounter > 0 && rfLensFnd < 15){
826 //PrintAndLog("DEBUG: rfCntr %d, fcCntr %d",rfCounter,fcCounter);
827 rfCnts[rfLensFnd]++;
828 rfLens[rfLensFnd++] = rfCounter;
829 }
830 } else {
831 *firstClockEdge = i;
832 firstBitFnd++;
833 }
834 rfCounter=0;
835 lastFCcnt=fcCounter;
836 }
837 fcCounter=0;
838 }
839 uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
840
841 for (i=0; i<15; i++){
842 //get highest 2 RF values (might need to get more values to compare or compare all?)
843 if (rfCnts[i]>rfCnts[rfHighest]){
844 rfHighest3=rfHighest2;
845 rfHighest2=rfHighest;
846 rfHighest=i;
847 } else if(rfCnts[i]>rfCnts[rfHighest2]){
848 rfHighest3=rfHighest2;
849 rfHighest2=i;
850 } else if(rfCnts[i]>rfCnts[rfHighest3]){
851 rfHighest3=i;
852 }
853 if (g_debugMode==2) prnt("DEBUG FSK: RF %d, cnts %d",rfLens[i], rfCnts[i]);
854 }
855 // set allowed clock remainder tolerance to be 1 large field clock length+1
856 // we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off
857 uint8_t tol1 = fcHigh+1;
858
859 if (g_debugMode==2) prnt("DEBUG FSK: most counted rf values: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
860
861 // loop to find the highest clock that has a remainder less than the tolerance
862 // compare samples counted divided by
863 // test 128 down to 32 (shouldn't be possible to have fc/10 & fc/8 and rf/16 or less)
864 int ii=7;
865 for (; ii>=2; ii--){
866 if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
867 if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
868 if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
869 if (g_debugMode==2) prnt("DEBUG FSK: clk %d divides into the 3 most rf values within tolerance",clk[ii]);
870 break;
871 }
872 }
873 }
874 }
875
876 if (ii<2) return 0; // oops we went too far
877
878 return clk[ii];
879 }
880
881 uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fcLow) {
882 int firstClockEdge = 0;
883 return detectFSKClk_ext(BitStream, size, fcHigh, fcLow, &firstClockEdge);
884 }
885
886 //**********************************************************************************************
887 //--------------------Modulation Demods &/or Decoding Section-----------------------------------
888 //**********************************************************************************************
889
890 // look for Sequence Terminator - should be pulses of clk*(1 or 2), clk*2, clk*(1.5 or 2), by idx we mean graph position index...
891 bool findST(int *stStopLoc, int *stStartIdx, int lowToLowWaveLen[], int highToLowWaveLen[], int clk, int tol, int buffSize, int *i) {
892 for (; *i < buffSize - 4; *i+=1) {
893 *stStartIdx += lowToLowWaveLen[*i]; //caution part of this wave may be data and part may be ST.... to be accounted for in main function for now...
894 if (lowToLowWaveLen[*i] >= clk*1-tol && lowToLowWaveLen[*i] <= (clk*2)+tol && highToLowWaveLen[*i] < clk+tol) { //1 to 2 clocks depending on 2 bits prior
895 if (lowToLowWaveLen[*i+1] >= clk*2-tol && lowToLowWaveLen[*i+1] <= clk*2+tol && highToLowWaveLen[*i+1] > clk*3/2-tol) { //2 clocks and wave size is 1 1/2
896 if (lowToLowWaveLen[*i+2] >= (clk*3)/2-tol && lowToLowWaveLen[*i+2] <= clk*2+tol && highToLowWaveLen[*i+2] > clk-tol) { //1 1/2 to 2 clocks and at least one full clock wave
897 if (lowToLowWaveLen[*i+3] >= clk*1-tol && lowToLowWaveLen[*i+3] <= clk*2+tol) { //1 to 2 clocks for end of ST + first bit
898 *stStopLoc = *i + 3;
899 return true;
900 }
901 }
902 }
903 }
904 }
905 return false;
906 }
907 //by marshmellow
908 //attempt to identify a Sequence Terminator in ASK modulated raw wave
909 bool DetectST_ext(uint8_t buffer[], size_t *size, int *foundclock, size_t *ststart, size_t *stend) {
910 size_t bufsize = *size;
911 //need to loop through all samples and identify our clock, look for the ST pattern
912 uint8_t fndClk[] = {8,16,32,40,50,64,128};
913 int clk = 0;
914 int tol = 0;
915 int i, j, skip, start, end, low, high, minClk, waveStart;
916 //probably should malloc... || test if memory is available ... handle device side? memory danger!!! [marshmellow]
917 int tmpbuff[bufsize / 32]; // low to low wave count //guess rf/32 clock, if click is smaller we will only have room for a fraction of the samples captured
918 int waveLen[bufsize / 32]; // high to low wave count //if clock is larger then we waste memory in array size that is not needed...
919 size_t testsize = (bufsize < 512) ? bufsize : 512;
920 int phaseoff = 0;
921 high = low = 128;
922 memset(tmpbuff, 0, sizeof(tmpbuff));
923 memset(waveLen, 0, sizeof(waveLen));
924
925 if ( getHiLo(buffer, testsize, &high, &low, 80, 80) == -1 ) {
926 if (g_debugMode==2) prnt("DEBUG STT: just noise detected - quitting");
927 return false; //just noise
928 }
929 i = 0;
930 j = 0;
931 minClk = 255;
932 // get to first full low to prime loop and skip incomplete first pulse
933 while ((buffer[i] < high) && (i < bufsize))
934 ++i;
935 while ((buffer[i] > low) && (i < bufsize))
936 ++i;
937 skip = i;
938
939 // populate tmpbuff buffer with pulse lengths
940 while (i < bufsize) {
941 // measure from low to low
942 while ((buffer[i] > low) && (i < bufsize))
943 ++i;
944 start= i;
945 while ((buffer[i] < high) && (i < bufsize))
946 ++i;
947 //first high point for this wave
948 waveStart = i;
949 while ((buffer[i] > low) && (i < bufsize))
950 ++i;
951 if (j >= (bufsize/32)) {
952 break;
953 }
954 waveLen[j] = i - waveStart; //first high to first low
955 tmpbuff[j++] = i - start;
956 if (i-start < minClk && i < bufsize) {
957 minClk = i - start;
958 }
959 }
960 // set clock - might be able to get this externally and remove this work...
961 if (!clk) {
962 for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
963 tol = fndClk[clkCnt]/8;
964 if (minClk >= fndClk[clkCnt]-tol && minClk <= fndClk[clkCnt]+1) {
965 clk=fndClk[clkCnt];
966 break;
967 }
968 }
969 // clock not found - ERROR
970 if (!clk) {
971 if (g_debugMode==2) prnt("DEBUG STT: clock not found - quitting");
972 return false;
973 }
974 } else tol = clk/8;
975
976 *foundclock = clk;
977 i=0;
978 if (!findST(&start, &skip, tmpbuff, waveLen, clk, tol, j, &i)) {
979 // first ST not found - ERROR
980 if (g_debugMode==2) prnt("DEBUG STT: first STT not found - quitting");
981 return false;
982 } else {
983 if (g_debugMode==2) prnt("DEBUG STT: first STT found at wave: %i, skip: %i, j=%i", start, skip, j);
984 }
985 if (waveLen[i+2] > clk*1+tol)
986 phaseoff = 0;
987 else
988 phaseoff = clk/2;
989
990 // skip over the remainder of ST
991 skip += clk*7/2; //3.5 clocks from tmpbuff[i] = end of st - also aligns for ending point
992
993 // now do it again to find the end
994 int dummy1 = 0;
995 end = skip;
996 i+=3;
997 if (!findST(&dummy1, &end, tmpbuff, waveLen, clk, tol, j, &i)) {
998 //didn't find second ST - ERROR
999 if (g_debugMode==2) prnt("DEBUG STT: second STT not found - quitting");
1000 return false;
1001 }
1002 end -= phaseoff;
1003 if (g_debugMode==2) prnt("DEBUG STT: start of data: %d end of data: %d, datalen: %d, clk: %d, bits: %d, phaseoff: %d", skip, end, end-skip, clk, (end-skip)/clk, phaseoff);
1004 //now begin to trim out ST so we can use normal demod cmds
1005 start = skip;
1006 size_t datalen = end - start;
1007 // check validity of datalen (should be even clock increments) - use a tolerance of up to 1/8th a clock
1008 if ( clk - (datalen % clk) <= clk/8) {
1009 // padd the amount off - could be problematic... but shouldn't happen often
1010 datalen += clk - (datalen % clk);
1011 } else if ( (datalen % clk) <= clk/8 ) {
1012 // padd the amount off - could be problematic... but shouldn't happen often
1013 datalen -= datalen % clk;
1014 } else {
1015 if (g_debugMode==2) prnt("DEBUG STT: datalen not divisible by clk: %u %% %d = %d - quitting", datalen, clk, datalen % clk);
1016 return false;
1017 }
1018 // if datalen is less than one t55xx block - ERROR
1019 if (datalen/clk < 8*4) {
1020 if (g_debugMode==2) prnt("DEBUG STT: datalen is less than 1 full t55xx block - quitting");
1021 return false;
1022 }
1023 size_t dataloc = start;
1024 if (buffer[dataloc-(clk*4)-(clk/8)] <= low && buffer[dataloc] <= low && buffer[dataloc-(clk*4)] >= high) {
1025 //we have low drift (and a low just before the ST and a low just after the ST) - compensate by backing up the start
1026 for ( i=0; i <= (clk/8); ++i ) {
1027 if ( buffer[dataloc - (clk*4) - i] <= low ) {
1028 dataloc -= i;
1029 break;
1030 }
1031 }
1032 }
1033
1034 size_t newloc = 0;
1035 i=0;
1036 if (g_debugMode==2) prnt("DEBUG STT: Starting STT trim - start: %d, datalen: %d ",dataloc, datalen);
1037 bool firstrun = true;
1038 // warning - overwriting buffer given with raw wave data with ST removed...
1039 while ( dataloc < bufsize-(clk/2) ) {
1040 //compensate for long high at end of ST not being high due to signal loss... (and we cut out the start of wave high part)
1041 if (buffer[dataloc]<high && buffer[dataloc]>low && buffer[dataloc+3]<high && buffer[dataloc+3]>low) {
1042 for(i=0; i < clk/2-tol; ++i) {
1043 buffer[dataloc+i] = high+5;
1044 }
1045 } //test for single sample outlier (high between two lows) in the case of very strong waves
1046 if (buffer[dataloc] >= high && buffer[dataloc+2] <= low) {
1047 buffer[dataloc] = buffer[dataloc+2];
1048 buffer[dataloc+1] = buffer[dataloc+2];
1049 }
1050 if (firstrun) {
1051 *stend = dataloc;
1052 *ststart = dataloc-(clk*4);
1053 firstrun=false;
1054 }
1055 for (i=0; i<datalen; ++i) {
1056 if (i+newloc < bufsize) {
1057 if (i+newloc < dataloc)
1058 buffer[i+newloc] = buffer[dataloc];
1059
1060 dataloc++;
1061 }
1062 }
1063 newloc += i;
1064 //skip next ST - we just assume it will be there from now on...
1065 if (g_debugMode==2) prnt("DEBUG STT: skipping STT at %d to %d", dataloc, dataloc+(clk*4));
1066 dataloc += clk*4;
1067 }
1068 *size = newloc;
1069 return true;
1070 }
1071 bool DetectST(uint8_t buffer[], size_t *size, int *foundclock) {
1072 size_t ststart = 0, stend = 0;
1073 return DetectST_ext(buffer, size, foundclock, &ststart, &stend);
1074 }
1075
1076 //by marshmellow
1077 //take 11 10 01 11 00 and make 01100 ... miller decoding
1078 //check for phase errors - should never have half a 1 or 0 by itself and should never exceed 1111 or 0000 in a row
1079 //decodes miller encoded binary
1080 //NOTE askrawdemod will NOT demod miller encoded ask unless the clock is manually set to 1/2 what it is detected as!
1081 /*int millerRawDecode(uint8_t *BitStream, size_t *size, int invert) {
1082 if (*size < 16) return -1;
1083 uint16_t MaxBits = 512, errCnt = 0, bestErr = 1000, bestRun = 0;
1084 size_t i, ii, bitCnt=0;
1085 uint8_t alignCnt = 0, curBit = BitStream[0];
1086 //find alignment, needs 4 1s or 0s to properly align
1087 for (i=1; i < *size; i++) {
1088 alignCnt = (BitStream[i] == curBit) ? alignCnt+1 : 0;
1089 curBit = BitStream[i];
1090 if (alignCnt == 4) break;
1091 }
1092 // for now error if alignment not found. later add option to run it with multiple offsets...
1093 if (alignCnt != 4) {
1094 if (g_debugMode) prnt("ERROR MillerDecode: alignment not found so either your bitstream is not miller or your data does not have a 101 in it");
1095 return -1;
1096 }
1097
1098 }*/
1099
1100 //by marshmellow
1101 //take 01 or 10 = 1 and 11 or 00 = 0
1102 //check for phase errors - should never have 111 or 000 should be 01001011 or 10110100 for 1010
1103 //decodes biphase or if inverted it is AKA conditional dephase encoding AKA differential manchester encoding
1104 int BiphaseRawDecode(uint8_t *BitStream, size_t *size, int offset, int invert) {
1105 uint16_t bitnum = 0;
1106 uint16_t errCnt = 0;
1107 size_t i = offset;
1108 uint16_t MaxBits=512;
1109 //if not enough samples - error
1110 if (*size < 51) return -1;
1111 //check for phase change faults - skip one sample if faulty
1112 uint8_t offsetA = 1, offsetB = 1;
1113 for (; i<48; i+=2){
1114 if (BitStream[i+1]==BitStream[i+2]) offsetA=0;
1115 if (BitStream[i+2]==BitStream[i+3]) offsetB=0;
1116 }
1117 if (!offsetA && offsetB) offset++;
1118 for (i=offset; i<*size-3; i+=2){
1119 //check for phase error
1120 if (BitStream[i+1]==BitStream[i+2]) {
1121 BitStream[bitnum++]=7;
1122 errCnt++;
1123 }
1124 if((BitStream[i]==1 && BitStream[i+1]==0) || (BitStream[i]==0 && BitStream[i+1]==1)){
1125 BitStream[bitnum++]=1^invert;
1126 } else if((BitStream[i]==0 && BitStream[i+1]==0) || (BitStream[i]==1 && BitStream[i+1]==1)){
1127 BitStream[bitnum++]=invert;
1128 } else {
1129 BitStream[bitnum++]=7;
1130 errCnt++;
1131 }
1132 if(bitnum>MaxBits) break;
1133 }
1134 *size=bitnum;
1135 return errCnt;
1136 }
1137
1138 //by marshmellow
1139 //take 10 and 01 and manchester decode
1140 //run through 2 times and take least errCnt
1141 int manrawdecode(uint8_t * BitStream, size_t *size, uint8_t invert, uint8_t *alignPos) {
1142 uint16_t bitnum=0, MaxBits = 512, errCnt = 0;
1143 size_t i, ii;
1144 uint16_t bestErr = 1000, bestRun = 0;
1145 if (*size < 16) return -1;
1146 //find correct start position [alignment]
1147 for (ii=0;ii<2;++ii){
1148 for (i=ii; i<*size-3; i+=2)
1149 if (BitStream[i]==BitStream[i+1])
1150 errCnt++;
1151
1152 if (bestErr>errCnt){
1153 bestErr=errCnt;
1154 bestRun=ii;
1155 }
1156 errCnt=0;
1157 }
1158 *alignPos=bestRun;
1159 //decode
1160 for (i=bestRun; i < *size-3; i+=2){
1161 if(BitStream[i] == 1 && (BitStream[i+1] == 0)){
1162 BitStream[bitnum++]=invert;
1163 } else if((BitStream[i] == 0) && BitStream[i+1] == 1){
1164 BitStream[bitnum++]=invert^1;
1165 } else {
1166 BitStream[bitnum++]=7;
1167 }
1168 if(bitnum>MaxBits) break;
1169 }
1170 *size=bitnum;
1171 return bestErr;
1172 }
1173
1174 //by marshmellow
1175 //demodulates strong heavily clipped samples
1176 int cleanAskRawDemod(uint8_t *BinStream, size_t *size, int clk, int invert, int high, int low, int *startIdx)
1177 {
1178 *startIdx=0;
1179 size_t bitCnt=0, smplCnt=1, errCnt=0;
1180 bool waveHigh = (BinStream[0] >= high);
1181 for (size_t i=1; i < *size; i++){
1182 if (BinStream[i] >= high && waveHigh){
1183 smplCnt++;
1184 } else if (BinStream[i] <= low && !waveHigh){
1185 smplCnt++;
1186 } else { //transition
1187 if ((BinStream[i] >= high && !waveHigh) || (BinStream[i] <= low && waveHigh)){
1188 if (smplCnt > clk-(clk/4)-1) { //full clock
1189 if (smplCnt > clk + (clk/4)+1) { //too many samples
1190 errCnt++;
1191 if (g_debugMode==2) prnt("DEBUG ASK: Modulation Error at: %u", i);
1192 BinStream[bitCnt++] = 7;
1193 } else if (waveHigh) {
1194 BinStream[bitCnt++] = invert;
1195 BinStream[bitCnt++] = invert;
1196 } else if (!waveHigh) {
1197 BinStream[bitCnt++] = invert ^ 1;
1198 BinStream[bitCnt++] = invert ^ 1;
1199 }
1200 if (*startIdx==0) *startIdx = i-clk;
1201 waveHigh = !waveHigh;
1202 smplCnt = 0;
1203 } else if (smplCnt > (clk/2) - (clk/4)-1) { //half clock
1204 if (waveHigh) {
1205 BinStream[bitCnt++] = invert;
1206 } else if (!waveHigh) {
1207 BinStream[bitCnt++] = invert ^ 1;
1208 }
1209 if (*startIdx==0) *startIdx = i-(clk/2);
1210 waveHigh = !waveHigh;
1211 smplCnt = 0;
1212 } else {
1213 smplCnt++;
1214 //transition bit oops
1215 }
1216 } else { //haven't hit new high or new low yet
1217 smplCnt++;
1218 }
1219 }
1220 }
1221 *size = bitCnt;
1222 return errCnt;
1223 }
1224
1225 //by marshmellow
1226 //attempts to demodulate ask modulations, askType == 0 for ask/raw, askType==1 for ask/manchester
1227 int askdemod_ext(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType, int *startIdx) {
1228 if (*size==0) return -1;
1229 int start = DetectASKClock(BinStream, *size, clk, maxErr); //clock default
1230 if (*clk==0 || start < 0) return -3;
1231 if (*invert != 1) *invert = 0;
1232 if (amp==1) askAmp(BinStream, *size);
1233 if (g_debugMode==2) prnt("DEBUG ASK: clk %d, beststart %d, amp %d", *clk, start, amp);
1234
1235 //start pos from detect ask clock is 1/2 clock offset
1236 // NOTE: can be negative (demod assumes rest of wave was there)
1237 *startIdx = start - (*clk/2);
1238 uint8_t initLoopMax = 255;
1239 if (initLoopMax > *size) initLoopMax = *size;
1240 // Detect high and lows
1241 //25% clip in case highs and lows aren't clipped [marshmellow]
1242 int high, low;
1243 if (getHiLo(BinStream, initLoopMax, &high, &low, 75, 75) < 1)
1244 return -2; //just noise
1245
1246 size_t errCnt = 0;
1247 // if clean clipped waves detected run alternate demod
1248 if (DetectCleanAskWave(BinStream, *size, high, low)) {
1249 if (g_debugMode==2) prnt("DEBUG ASK: Clean Wave Detected - using clean wave demod");
1250 errCnt = cleanAskRawDemod(BinStream, size, *clk, *invert, high, low, startIdx);
1251 if (askType) { //askman
1252 uint8_t alignPos = 0;
1253 errCnt = manrawdecode(BinStream, size, 0, &alignPos);
1254 *startIdx += *clk/2 * alignPos;
1255 if (g_debugMode) prnt("DEBUG ASK CLEAN: startIdx %i, alignPos %u", *startIdx, alignPos);
1256 return errCnt;
1257 } else { //askraw
1258 return errCnt;
1259 }
1260 }
1261 if (g_debugMode) prnt("DEBUG ASK WEAK: startIdx %i", *startIdx);
1262 if (g_debugMode==2) prnt("DEBUG ASK: Weak Wave Detected - using weak wave demod");
1263
1264 int lastBit; //set first clock check - can go negative
1265 size_t i, bitnum = 0; //output counter
1266 uint8_t midBit = 0;
1267 uint8_t tol = 0; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
1268 if (*clk <= 32) tol = 1; //clock tolerance may not be needed anymore currently set to + or - 1 but could be increased for poor waves or removed entirely
1269 size_t MaxBits = 3072; //max bits to collect
1270 lastBit = start - *clk;
1271
1272 for (i = start; i < *size; ++i) {
1273 if (i-lastBit >= *clk-tol){
1274 if (BinStream[i] >= high) {
1275 BinStream[bitnum++] = *invert;
1276 } else if (BinStream[i] <= low) {
1277 BinStream[bitnum++] = *invert ^ 1;
1278 } else if (i-lastBit >= *clk+tol) {
1279 if (bitnum > 0) {
1280 if (g_debugMode==2) prnt("DEBUG ASK: Modulation Error at: %u", i);
1281 BinStream[bitnum++]=7;
1282 errCnt++;
1283 }
1284 } else { //in tolerance - looking for peak
1285 continue;
1286 }
1287 midBit = 0;
1288 lastBit += *clk;
1289 } else if (i-lastBit >= (*clk/2-tol) && !midBit && !askType){
1290 if (BinStream[i] >= high) {
1291 BinStream[bitnum++] = *invert;
1292 } else if (BinStream[i] <= low) {
1293 BinStream[bitnum++] = *invert ^ 1;
1294 } else if (i-lastBit >= *clk/2+tol) {
1295 BinStream[bitnum] = BinStream[bitnum-1];
1296 bitnum++;
1297 } else { //in tolerance - looking for peak
1298 continue;
1299 }
1300 midBit = 1;
1301 }
1302 if (bitnum >= MaxBits) break;
1303 }
1304 *size = bitnum;
1305 return errCnt;
1306 }
1307
1308 int askdemod(uint8_t *BinStream, size_t *size, int *clk, int *invert, int maxErr, uint8_t amp, uint8_t askType) {
1309 int start = 0;
1310 return askdemod_ext(BinStream, size, clk, invert, maxErr, amp, askType, &start);
1311 }
1312
1313 // by marshmellow - demodulate NRZ wave - requires a read with strong signal
1314 // peaks invert bit (high=1 low=0) each clock cycle = 1 bit determined by last peak
1315 int nrzRawDemod_ext(uint8_t *dest, size_t *size, int *clk, int *invert, int *startIdx) {
1316 if (justNoise(dest, *size)) return -1;
1317 *clk = DetectNRZClock(dest, *size, *clk);
1318 if (*clk==0) return -2;
1319 size_t i, gLen = 4096;
1320 if (gLen>*size) gLen = *size-20;
1321 int high, low;
1322 if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
1323
1324 uint8_t bit=0;
1325 //convert wave samples to 1's and 0's
1326 for(i=20; i < *size-20; i++){
1327 if (dest[i] >= high) bit = 1;
1328 if (dest[i] <= low) bit = 0;
1329 dest[i] = bit;
1330 }
1331 //now demod based on clock (rf/32 = 32 1's for one 1 bit, 32 0's for one 0 bit)
1332 size_t lastBit = 0;
1333 size_t numBits = 0;
1334 for(i=21; i < *size-20; i++) {
1335 //if transition detected or large number of same bits - store the passed bits
1336 if (dest[i] != dest[i-1] || (i-lastBit) == (10 * *clk)) {
1337 memset(dest+numBits, dest[i-1] ^ *invert, (i - lastBit + (*clk/4)) / *clk);
1338 numBits += (i - lastBit + (*clk/4)) / *clk;
1339 if (lastBit == 0) {
1340 *startIdx = i - (numBits * *clk);
1341 if (g_debugMode==2) prnt("DEBUG NRZ: startIdx %i", *startIdx);
1342 }
1343 lastBit = i-1;
1344 }
1345 }
1346 *size = numBits;
1347 return 0;
1348 }
1349 int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert) {
1350 int startIdx = 0;
1351 return nrzRawDemod_ext(dest, size, clk, invert, &startIdx);
1352 }
1353
1354 //translate wave to 11111100000 (1 for each short wave [higher freq] 0 for each long wave [lower freq])
1355 size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow, int *startIdx) {
1356 size_t last_transition = 0;
1357 size_t idx = 1;
1358 if (fchigh==0) fchigh=10;
1359 if (fclow==0) fclow=8;
1360 //set the threshold close to 0 (graph) or 128 std to avoid static
1361 uint8_t threshold_value = 123;
1362 size_t preLastSample = 0;
1363 size_t LastSample = 0;
1364 size_t currSample = 0;
1365 if ( size < 1024 ) return 0; // not enough samples
1366
1367 //find start of modulating data in trace
1368 idx = findModStart(dest, size, threshold_value, fchigh);
1369 // Need to threshold first sample
1370 if(dest[idx] < threshold_value) dest[0] = 0;
1371 else dest[0] = 1;
1372
1373 last_transition = idx;
1374 idx++;
1375 size_t numBits = 0;
1376 // count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
1377 // or 10 (fc/10) cycles but in practice due to noise etc we may end up with anywhere
1378 // between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
1379 // (could also be fc/5 && fc/7 for fsk1 = 4-9)
1380 for(; idx < size; idx++) {
1381 // threshold current value
1382 if (dest[idx] < threshold_value) dest[idx] = 0;
1383 else dest[idx] = 1;
1384
1385 // Check for 0->1 transition
1386 if (dest[idx-1] < dest[idx]) {
1387 preLastSample = LastSample;
1388 LastSample = currSample;
1389 currSample = idx-last_transition;
1390 if (currSample < (fclow-2)) { //0-5 = garbage noise (or 0-3)
1391 //do nothing with extra garbage
1392 } else if (currSample < (fchigh-1)) { //6-8 = 8 sample waves (or 3-6 = 5)
1393 //correct previous 9 wave surrounded by 8 waves (or 6 surrounded by 5)
1394 if (numBits > 1 && LastSample > (fchigh-2) && (preLastSample < (fchigh-1))){
1395 dest[numBits-1]=1;
1396 }
1397 dest[numBits++]=1;
1398 if (numBits > 0 && *startIdx==0) *startIdx = idx - fclow;
1399 } else if (currSample > (fchigh+1) && numBits < 3) { //12 + and first two bit = unusable garbage
1400 //do nothing with beginning garbage and reset.. should be rare..
1401 numBits = 0;
1402 } else if (currSample == (fclow+1) && LastSample == (fclow-1)) { // had a 7 then a 9 should be two 8's (or 4 then a 6 should be two 5's)
1403 dest[numBits++]=1;
1404 if (numBits > 0 && *startIdx==0) *startIdx = idx - fclow;
1405 } else { //9+ = 10 sample waves (or 6+ = 7)
1406 dest[numBits++]=0;
1407 if (numBits > 0 && *startIdx==0) *startIdx = idx - fchigh;
1408 }
1409 last_transition = idx;
1410 }
1411 }
1412 return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0
1413 }
1414
1415 //translate 11111100000 to 10
1416 //rfLen = clock, fchigh = larger field clock, fclow = smaller field clock
1417 size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow, int *startIdx) {
1418 uint8_t lastval=dest[0];
1419 size_t idx=0;
1420 size_t numBits=0;
1421 uint32_t n=1;
1422 for( idx=1; idx < size; idx++) {
1423 n++;
1424 if (dest[idx]==lastval) continue; //skip until we hit a transition
1425
1426 //find out how many bits (n) we collected (use 1/2 clk tolerance)
1427 //if lastval was 1, we have a 1->0 crossing
1428 if (dest[idx-1]==1) {
1429 n = (n * fclow + rfLen/2) / rfLen;
1430 } else {// 0->1 crossing
1431 n = (n * fchigh + rfLen/2) / rfLen;
1432 }
1433 if (n == 0) n = 1;
1434
1435 //first transition - save startidx
1436 if (numBits == 0) {
1437 if (lastval == 1) { //high to low
1438 *startIdx += (fclow * idx) - (n*rfLen);
1439 if (g_debugMode==2) prnt("DEBUG FSK: startIdx %i, fclow*idx %i, n*rflen %u", *startIdx, fclow*(idx), n*rfLen);
1440 } else {
1441 *startIdx += (fchigh * idx) - (n*rfLen);
1442 if (g_debugMode==2) prnt("DEBUG FSK: startIdx %i, fchigh*idx %i, n*rflen %u", *startIdx, fchigh*(idx), n*rfLen);
1443 }
1444 }
1445
1446 //add to our destination the bits we collected
1447 memset(dest+numBits, dest[idx-1]^invert , n);
1448 numBits += n;
1449 n=0;
1450 lastval=dest[idx];
1451 }//end for
1452 // if valid extra bits at the end were all the same frequency - add them in
1453 if (n > rfLen/fchigh) {
1454 if (dest[idx-2]==1) {
1455 n = (n * fclow + rfLen/2) / rfLen;
1456 } else {
1457 n = (n * fchigh + rfLen/2) / rfLen;
1458 }
1459 memset(dest+numBits, dest[idx-1]^invert , n);
1460 numBits += n;
1461 }
1462 return numBits;
1463 }
1464
1465 //by marshmellow (from holiman's base)
1466 // full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
1467 int fskdemod_ext(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow, int *startIdx) {
1468 // FSK demodulator
1469 size = fsk_wave_demod(dest, size, fchigh, fclow, startIdx);
1470 size = aggregate_bits(dest, size, rfLen, invert, fchigh, fclow, startIdx);
1471 return size;
1472 }
1473
1474 int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow) {
1475 int startIdx=0;
1476 return fskdemod_ext(dest, size, rfLen, invert, fchigh, fclow, &startIdx);
1477 }
1478
1479 // by marshmellow
1480 // convert psk1 demod to psk2 demod
1481 // only transition waves are 1s
1482 void psk1TOpsk2(uint8_t *BitStream, size_t size) {
1483 size_t i=1;
1484 uint8_t lastBit=BitStream[0];
1485 for (; i<size; i++){
1486 if (BitStream[i]==7){
1487 //ignore errors
1488 } else if (lastBit!=BitStream[i]){
1489 lastBit=BitStream[i];
1490 BitStream[i]=1;
1491 } else {
1492 BitStream[i]=0;
1493 }
1494 }
1495 return;
1496 }
1497
1498 // by marshmellow
1499 // convert psk2 demod to psk1 demod
1500 // from only transition waves are 1s to phase shifts change bit
1501 void psk2TOpsk1(uint8_t *BitStream, size_t size) {
1502 uint8_t phase=0;
1503 for (size_t i=0; i<size; i++){
1504 if (BitStream[i]==1){
1505 phase ^=1;
1506 }
1507 BitStream[i]=phase;
1508 }
1509 return;
1510 }
1511
1512 //by marshmellow - demodulate PSK1 wave
1513 //uses wave lengths (# Samples)
1514 int pskRawDemod_ext(uint8_t dest[], size_t *size, int *clock, int *invert, int *startIdx) {
1515 if (size == 0) return -1;
1516 uint16_t loopCnt = 4096; //don't need to loop through entire array...
1517 if (*size<loopCnt) loopCnt = *size;
1518
1519 size_t numBits=0;
1520 uint8_t curPhase = *invert;
1521 size_t i=0, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
1522 uint16_t fc=0, fullWaveLen=0, tol=1;
1523 uint16_t errCnt=0, waveLenCnt=0, errCnt2=0;
1524 fc = countFC(dest, *size, 1);
1525 uint8_t fc2 = fc >> 8;
1526 if (fc2 == 10) return -1; //fsk found - quit
1527 fc = fc & 0xFF;
1528 if (fc!=2 && fc!=4 && fc!=8) return -1;
1529 //PrintAndLog("DEBUG: FC: %d",fc);
1530 *clock = DetectPSKClock(dest, *size, *clock);
1531 if (*clock == 0) return -1;
1532
1533 //find start of modulating data in trace
1534 uint8_t threshold_value = 123; //-5
1535 i = findModStart(dest, *size, threshold_value, fc);
1536
1537 //find first phase shift
1538 int avgWaveVal=0, lastAvgWaveVal=0;
1539 waveStart = i;
1540 for (; i<loopCnt; i++) {
1541 // find peak
1542 if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
1543 waveEnd = i+1;
1544 if (g_debugMode == 2) prnt("DEBUG PSK: waveEnd: %u, waveStart: %u",waveEnd, waveStart);
1545 waveLenCnt = waveEnd-waveStart;
1546 if (waveLenCnt > fc && waveStart > fc && !(waveLenCnt > fc+3)){ //not first peak and is a large wave but not out of whack
1547 lastAvgWaveVal = avgWaveVal/(waveLenCnt);
1548 firstFullWave = waveStart;
1549 fullWaveLen=waveLenCnt;
1550 //if average wave value is > graph 0 then it is an up wave or a 1 (could cause inverting)
1551 if (lastAvgWaveVal > threshold_value) curPhase ^= 1;
1552 break;
1553 }
1554
1555 waveStart = i+1;
1556 avgWaveVal = 0;
1557 }
1558 avgWaveVal += dest[i+2];
1559 }
1560 if (firstFullWave == 0) {
1561 // no phase shift detected - could be all 1's or 0's - doesn't matter where we start
1562 // so skip a little to ensure we are past any Start Signal
1563 firstFullWave = 160;
1564 memset(dest, curPhase, firstFullWave / *clock);
1565 } else {
1566 memset(dest, curPhase^1, firstFullWave / *clock);
1567 }
1568 //advance bits
1569 numBits += (firstFullWave / *clock);
1570 *startIdx = firstFullWave - (*clock * numBits)+2;
1571 //set start of wave as clock align
1572 lastClkBit = firstFullWave;
1573 if (g_debugMode==2) prnt("DEBUG PSK: firstFullWave: %u, waveLen: %u, startIdx %i",firstFullWave,fullWaveLen, *startIdx);
1574 if (g_debugMode==2) prnt("DEBUG PSK: clk: %d, lastClkBit: %u, fc: %u", *clock, lastClkBit,(unsigned int) fc);
1575 waveStart = 0;
1576 dest[numBits++] = curPhase; //set first read bit
1577 for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){
1578 //top edge of wave = start of new wave
1579 if (dest[i]+fc < dest[i+1] && dest[i+1] >= dest[i+2]){
1580 if (waveStart == 0) {
1581 waveStart = i+1;
1582 waveLenCnt = 0;
1583 avgWaveVal = dest[i+1];
1584 } else { //waveEnd
1585 waveEnd = i+1;
1586 waveLenCnt = waveEnd-waveStart;
1587 lastAvgWaveVal = avgWaveVal/waveLenCnt;
1588 if (waveLenCnt > fc){
1589 //PrintAndLog("DEBUG: avgWaveVal: %d, waveSum: %d",lastAvgWaveVal,avgWaveVal);
1590 //this wave is a phase shift
1591 //PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, i: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+*clock-tol,i+1,fc);
1592 if (i+1 >= lastClkBit + *clock - tol){ //should be a clock bit
1593 curPhase ^= 1;
1594 dest[numBits++] = curPhase;
1595 lastClkBit += *clock;
1596 } else if (i < lastClkBit+10+fc){
1597 //noise after a phase shift - ignore
1598 } else { //phase shift before supposed to based on clock
1599 errCnt++;
1600 dest[numBits++] = 7;
1601 }
1602 } else if (i+1 > lastClkBit + *clock + tol + fc){
1603 lastClkBit += *clock; //no phase shift but clock bit
1604 dest[numBits++] = curPhase;
1605 } else if (waveLenCnt < fc - 1) { //wave is smaller than field clock (shouldn't happen often)
1606 errCnt2++;
1607 if(errCnt2 > 101) return errCnt2;
1608 }
1609 avgWaveVal = 0;
1610 waveStart = i+1;
1611 }
1612 }
1613 avgWaveVal += dest[i+1];
1614 }
1615 *size = numBits;
1616 return errCnt;
1617 }
1618
1619 int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert) {
1620 int startIdx = 0;
1621 return pskRawDemod_ext(dest, size, clock, invert, &startIdx);
1622 }
1623
1624 //**********************************************************************************************
1625 //-----------------Tag format detection section-------------------------------------------------
1626 //**********************************************************************************************
1627
1628 // by marshmellow
1629 // FSK Demod then try to locate an AWID ID
1630 int AWIDdemodFSK(uint8_t *dest, size_t *size) {
1631 //make sure buffer has enough data
1632 if (*size < 96*50) return -1;
1633
1634 if (justNoise(dest, *size)) return -2;
1635
1636 // FSK demodulator
1637 *size = fskdemod(dest, *size, 50, 1, 10, 8); // fsk2a RF/50
1638 if (*size < 96) return -3; //did we get a good demod?
1639
1640 uint8_t preamble[] = {0,0,0,0,0,0,0,1};
1641 size_t startIdx = 0;
1642 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1643 if (errChk == 0) return -4; //preamble not found
1644 if (*size != 96) return -5;
1645 return (int)startIdx;
1646 }
1647
1648 //by marshmellow
1649 //takes 1s and 0s and searches for EM410x format - output EM ID
1650 uint8_t Em410xDecode(uint8_t *BitStream, size_t *size, size_t *startIdx, uint32_t *hi, uint64_t *lo)
1651 {
1652 //sanity checks
1653 if (*size < 64) return 0;
1654 if (BitStream[1]>1) return 0; //allow only 1s and 0s
1655
1656 // 111111111 bit pattern represent start of frame
1657 // include 0 in front to help get start pos
1658 uint8_t preamble[] = {0,1,1,1,1,1,1,1,1,1};
1659 uint8_t errChk = 0;
1660 uint8_t FmtLen = 10; // sets of 4 bits = end data
1661 *startIdx = 0;
1662 errChk = preambleSearch(BitStream, preamble, sizeof(preamble), size, startIdx);
1663 if ( errChk == 0 || (*size != 64 && *size != 128) ) return 0;
1664 if (*size == 128) FmtLen = 22; // 22 sets of 4 bits
1665
1666 //skip last 4bit parity row for simplicity
1667 *size = removeParity(BitStream, *startIdx + sizeof(preamble), 5, 0, FmtLen * 5);
1668 if (*size == 40) { // std em410x format
1669 *hi = 0;
1670 *lo = ((uint64_t)(bytebits_to_byte(BitStream, 8)) << 32) | (bytebits_to_byte(BitStream + 8, 32));
1671 } else if (*size == 88) { // long em format
1672 *hi = (bytebits_to_byte(BitStream, 24));
1673 *lo = ((uint64_t)(bytebits_to_byte(BitStream + 24, 32)) << 32) | (bytebits_to_byte(BitStream + 24 + 32, 32));
1674 } else {
1675 return 0;
1676 }
1677 return 1;
1678 }
1679
1680 // Ask/Biphase Demod then try to locate an ISO 11784/85 ID
1681 // BitStream must contain previously askrawdemod and biphasedemoded data
1682 int FDXBdemodBI(uint8_t *dest, size_t *size) {
1683 //make sure buffer has enough data
1684 if (*size < 128) return -1;
1685
1686 size_t startIdx = 0;
1687 uint8_t preamble[] = {0,0,0,0,0,0,0,0,0,0,1};
1688
1689 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1690 if (errChk == 0) return -2; //preamble not found
1691 return (int)startIdx;
1692 }
1693
1694 // by marshmellow
1695 // demod gProxIIDemod
1696 // error returns as -x
1697 // success returns start position in BitStream
1698 // BitStream must contain previously askrawdemod and biphasedemoded data
1699 int gProxII_Demod(uint8_t BitStream[], size_t *size) {
1700 size_t startIdx=0;
1701 uint8_t preamble[] = {1,1,1,1,1,0};
1702
1703 uint8_t errChk = preambleSearch(BitStream, preamble, sizeof(preamble), size, &startIdx);
1704 if (errChk == 0) return -3; //preamble not found
1705 if (*size != 96) return -2; //should have found 96 bits
1706 //check first 6 spacer bits to verify format
1707 if (!BitStream[startIdx+5] && !BitStream[startIdx+10] && !BitStream[startIdx+15] && !BitStream[startIdx+20] && !BitStream[startIdx+25] && !BitStream[startIdx+30]){
1708 //confirmed proper separator bits found
1709 //return start position
1710 return (int) startIdx;
1711 }
1712 return -5; //spacer bits not found - not a valid gproxII
1713 }
1714
1715 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
1716 int HIDdemodFSK(uint8_t *dest, size_t *size, uint32_t *hi2, uint32_t *hi, uint32_t *lo) {
1717 if (justNoise(dest, *size)) return -1;
1718
1719 size_t numStart=0, size2=*size, startIdx=0;
1720 // FSK demodulator
1721 *size = fskdemod(dest, size2,50,1,10,8); //fsk2a
1722 if (*size < 96*2) return -2;
1723 // 00011101 bit pattern represent start of frame, 01 pattern represents a 0 and 10 represents a 1
1724 uint8_t preamble[] = {0,0,0,1,1,1,0,1};
1725 // find bitstring in array
1726 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1727 if (errChk == 0) return -3; //preamble not found
1728
1729 numStart = startIdx + sizeof(preamble);
1730 // final loop, go over previously decoded FSK data and manchester decode into usable tag ID
1731 for (size_t idx = numStart; (idx-numStart) < *size - sizeof(preamble); idx+=2){
1732 if (dest[idx] == dest[idx+1]){
1733 return -4; //not manchester data
1734 }
1735 *hi2 = (*hi2<<1)|(*hi>>31);
1736 *hi = (*hi<<1)|(*lo>>31);
1737 //Then, shift in a 0 or one into low
1738 if (dest[idx] && !dest[idx+1]) // 1 0
1739 *lo=(*lo<<1)|1;
1740 else // 0 1
1741 *lo=(*lo<<1)|0;
1742 }
1743 return (int)startIdx;
1744 }
1745
1746 int IOdemodFSK(uint8_t *dest, size_t size) {
1747 if (justNoise(dest, size)) return -1;
1748 //make sure buffer has data
1749 if (size < 66*64) return -2;
1750 // FSK demodulator
1751 size = fskdemod(dest, size, 64, 1, 10, 8); // FSK2a RF/64
1752 if (size < 65) return -3; //did we get a good demod?
1753 //Index map
1754 //0 10 20 30 40 50 60
1755 //| | | | | | |
1756 //01234567 8 90123456 7 89012345 6 78901234 5 67890123 4 56789012 3 45678901 23
1757 //-----------------------------------------------------------------------------
1758 //00000000 0 11110000 1 facility 1 version* 1 code*one 1 code*two 1 ???????? 11
1759 //
1760 //XSF(version)facility:codeone+codetwo
1761 //Handle the data
1762 size_t startIdx = 0;
1763 uint8_t preamble[] = {0,0,0,0,0,0,0,0,0,1};
1764 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), &size, &startIdx);
1765 if (errChk == 0) return -4; //preamble not found
1766
1767 if (!dest[startIdx+8] && dest[startIdx+17]==1 && dest[startIdx+26]==1 && dest[startIdx+35]==1 && dest[startIdx+44]==1 && dest[startIdx+53]==1){
1768 //confirmed proper separator bits found
1769 //return start position
1770 return (int) startIdx;
1771 }
1772 return -5;
1773 }
1774
1775 // redesigned by marshmellow adjusted from existing decode functions
1776 // indala id decoding - only tested on 26 bit tags, but attempted to make it work for more
1777 int indala26decode(uint8_t *bitStream, size_t *size, uint8_t *invert) {
1778 //26 bit 40134 format (don't know other formats)
1779 uint8_t preamble[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1};
1780 uint8_t preamble_i[] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0};
1781 size_t startidx = 0;
1782 if (!preambleSearch(bitStream, preamble, sizeof(preamble), size, &startidx)){
1783 // if didn't find preamble try again inverting
1784 if (!preambleSearch(bitStream, preamble_i, sizeof(preamble_i), size, &startidx)) return -1;
1785 *invert ^= 1;
1786 }
1787 if (*size != 64 && *size != 224) return -2;
1788 if (*invert==1)
1789 for (size_t i = startidx; i < *size; i++)
1790 bitStream[i] ^= 1;
1791
1792 return (int) startidx;
1793 }
1794
1795 // loop to get raw paradox waveform then FSK demodulate the TAG ID from it
1796 int ParadoxdemodFSK(uint8_t *dest, size_t *size, uint32_t *hi2, uint32_t *hi, uint32_t *lo) {
1797 if (justNoise(dest, *size)) return -1;
1798
1799 size_t numStart=0, size2=*size, startIdx=0;
1800 // FSK demodulator
1801 *size = fskdemod(dest, size2,50,1,10,8); //fsk2a
1802 if (*size < 96) return -2;
1803
1804 // 00001111 bit pattern represent start of frame, 01 pattern represents a 0 and 10 represents a 1
1805 uint8_t preamble[] = {0,0,0,0,1,1,1,1};
1806
1807 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1808 if (errChk == 0) return -3; //preamble not found
1809
1810 numStart = startIdx + sizeof(preamble);
1811 // final loop, go over previously decoded FSK data and manchester decode into usable tag ID
1812 for (size_t idx = numStart; (idx-numStart) < *size - sizeof(preamble); idx+=2){
1813 if (dest[idx] == dest[idx+1])
1814 return -4; //not manchester data
1815 *hi2 = (*hi2<<1)|(*hi>>31);
1816 *hi = (*hi<<1)|(*lo>>31);
1817 //Then, shift in a 0 or one into low
1818 if (dest[idx] && !dest[idx+1]) // 1 0
1819 *lo=(*lo<<1)|1;
1820 else // 0 1
1821 *lo=(*lo<<1)|0;
1822 }
1823 return (int)startIdx;
1824 }
1825
1826 // find presco preamble 0x10D in already demoded data
1827 int PrescoDemod(uint8_t *dest, size_t *size) {
1828 //make sure buffer has data
1829 if (*size < 64*2) return -2;
1830
1831 size_t startIdx = 0;
1832 uint8_t preamble[] = {1,0,0,0,0,1,1,0,1,0,0,0,0,0,0,0,0,0,0,0};
1833 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1834 if (errChk == 0) return -4; //preamble not found
1835 //return start position
1836 return (int) startIdx;
1837 }
1838
1839 // by marshmellow
1840 // FSK Demod then try to locate a Farpointe Data (pyramid) ID
1841 int PyramiddemodFSK(uint8_t *dest, size_t *size) {
1842 //make sure buffer has data
1843 if (*size < 128*50) return -5;
1844
1845 //test samples are not just noise
1846 if (justNoise(dest, *size)) return -1;
1847
1848 // FSK demodulator
1849 *size = fskdemod(dest, *size, 50, 1, 10, 8); // fsk2a RF/50
1850 if (*size < 128) return -2; //did we get a good demod?
1851
1852 uint8_t preamble[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1};
1853 size_t startIdx = 0;
1854 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1855 if (errChk == 0) return -4; //preamble not found
1856 if (*size != 128) return -3;
1857 return (int)startIdx;
1858 }
1859
1860 // by marshmellow
1861 // find viking preamble 0xF200 in already demoded data
1862 int VikingDemod_AM(uint8_t *dest, size_t *size) {
1863 //make sure buffer has data
1864 if (*size < 64*2) return -2;
1865
1866 size_t startIdx = 0;
1867 uint8_t preamble[] = {1,1,1,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
1868 uint8_t errChk = preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx);
1869 if (errChk == 0) return -4; //preamble not found
1870 uint32_t checkCalc = bytebits_to_byte(dest+startIdx,8) ^ bytebits_to_byte(dest+startIdx+8,8) ^ bytebits_to_byte(dest+startIdx+16,8)
1871 ^ bytebits_to_byte(dest+startIdx+24,8) ^ bytebits_to_byte(dest+startIdx+32,8) ^ bytebits_to_byte(dest+startIdx+40,8)
1872 ^ bytebits_to_byte(dest+startIdx+48,8) ^ bytebits_to_byte(dest+startIdx+56,8);
1873 if ( checkCalc != 0xA8 ) return -5;
1874 if (*size != 64) return -6;
1875 //return start position
1876 return (int) startIdx;
1877 }
1878
1879
1880 // by iceman
1881 // find Visa2000 preamble in already demoded data
1882 int Visa2kDemod_AM(uint8_t *dest, size_t *size) {
1883 if (*size < 96) return -1; //make sure buffer has data
1884 size_t startIdx = 0;
1885 uint8_t preamble[] = {0,1,0,1,0,1,1,0,0,1,0,0,1,0,0,1,0,1,0,1,0,0,1,1,0,0,1,1,0,0,1,0};
1886 if (preambleSearch(dest, preamble, sizeof(preamble), size, &startIdx) == 0)
1887 return -2; //preamble not found
1888 if (*size != 96) return -3; //wrong demoded size
1889 //return start position
1890 return (int)startIdx;
1891 }
Impressum, Datenschutz