]> git.zerfleddert.de Git - proxmark3-svn/blob - common/polarssl/polarssl_config.h
small refactoring
[proxmark3-svn] / common / polarssl / polarssl_config.h
1 /**
2 * \file config.h
3 *
4 * \brief Configuration options (set of defines)
5 *
6 * Copyright (C) 2006-2014, Brainspark B.V.
7 *
8 * This file is part of PolarSSL (http://www.polarssl.org)
9 * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
10 *
11 * All rights reserved.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
26 *
27 * This set of compile-time options may be used to enable
28 * or disable features selectively, and reduce the global
29 * memory footprint.
30 */
31 #ifndef POLARSSL_CONFIG_H
32 #define POLARSSL_CONFIG_H
33
34 #if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
35 #define _CRT_SECURE_NO_DEPRECATE 1
36 #endif
37
38 /**
39 * \name SECTION: System support
40 *
41 * This section sets system specific settings.
42 * \{
43 */
44
45 /**
46 * \def POLARSSL_HAVE_INT8
47 *
48 * The system uses 8-bit wide native integers.
49 *
50 * Uncomment if native integers are 8-bit wide.
51 */
52 //#define POLARSSL_HAVE_INT8
53
54 /**
55 * \def POLARSSL_HAVE_INT16
56 *
57 * The system uses 16-bit wide native integers.
58 *
59 * Uncomment if native integers are 16-bit wide.
60 */
61 //#define POLARSSL_HAVE_INT16
62
63 /**
64 * \def POLARSSL_HAVE_LONGLONG
65 *
66 * The compiler supports the 'long long' type.
67 * (Only used on 32-bit platforms)
68 */
69 #define POLARSSL_HAVE_LONGLONG
70
71 /**
72 * \def POLARSSL_HAVE_ASM
73 *
74 * The compiler has support for asm().
75 *
76 * Requires support for asm() in compiler.
77 *
78 * Used in:
79 * library/timing.c
80 * library/padlock.c
81 * include/polarssl/bn_mul.h
82 *
83 * Comment to disable the use of assembly code.
84 */
85 #define POLARSSL_HAVE_ASM
86
87 /**
88 * \def POLARSSL_HAVE_SSE2
89 *
90 * CPU supports SSE2 instruction set.
91 *
92 * Uncomment if the CPU supports SSE2 (IA-32 specific).
93 */
94 //#define POLARSSL_HAVE_SSE2
95
96 /**
97 * \def POLARSSL_HAVE_TIME
98 *
99 * System has time.h and time() / localtime() / gettimeofday().
100 *
101 * Comment if your system does not support time functions
102 */
103 #define POLARSSL_HAVE_TIME
104
105 /**
106 * \def POLARSSL_HAVE_IPV6
107 *
108 * System supports the basic socket interface for IPv6 (RFC 3493),
109 * specifically getaddrinfo(), freeaddrinfo() and struct sockaddr_storage.
110 *
111 * Note: on Windows/MingW, XP or higher is required.
112 *
113 * Comment if your system does not support the IPv6 socket interface
114 */
115 #define POLARSSL_HAVE_IPV6
116
117 /**
118 * \def POLARSSL_PLATFORM_MEMORY
119 *
120 * Enable the memory allocation layer.
121 *
122 * By default PolarSSL uses the system-provided malloc() and free().
123 * This allows different allocators (self-implemented or provided) to be
124 * provided to the platform abstraction layer.
125 *
126 * Enabling POLARSSL_PLATFORM_MEMORY will provide "platform_set_malloc_free()"
127 * to allow you to set an alternative malloc() and free() function pointer.
128 *
129 * Requires: POLARSSL_PLATFORM_C
130 *
131 * Enable this layer to allow use of alternative memory allocators.
132 */
133 //#define POLARSSL_PLATFORM_MEMORY
134
135 /**
136 * \def POLARSSL_PLATFORM_NO_STD_FUNCTIONS
137 *
138 * Do not assign standard functions in the platform layer (e.g. malloc() to
139 * POLARSSL_PLATFORM_STD_MALLOC and printf() to POLARSSL_PLATFORM_STD_PRINTF)
140 *
141 * This makes sure there are no linking errors on platforms that do not support
142 * these functions. You will HAVE to provide alternatives, either at runtime
143 * via the platform_set_xxx() functions or at compile time by setting
144 * the POLARSSL_PLATFORM_STD_XXX defines.
145 *
146 * Requires: POLARSSL_PLATFORM_C
147 *
148 * Uncomment to prevent default assignment of standard functions in the
149 * platform layer.
150 */
151 //#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS
152
153 /**
154 * \def POLARSSL_PLATFORM_XXX_ALT
155 *
156 * Uncomment a macro to let PolarSSL support the function in the platform
157 * abstraction layer.
158 *
159 * Example: In case you uncomment POLARSSL_PLATFORM_PRINTF_ALT, PolarSSL will
160 * provide a function "platform_set_printf()" that allows you to set an
161 * alternative printf function pointer.
162 *
163 * All these define require POLARSSL_PLATFORM_C to be defined!
164 *
165 * Uncomment a macro to enable alternate implementation of specific base
166 * platform function
167 */
168 //#define POLARSSL_PLATFORM_PRINTF_ALT
169 //#define POLARSSL_PLATFORM_FPRINTF_ALT
170 /* \} name SECTION: System support */
171
172 /**
173 * \name SECTION: PolarSSL feature support
174 *
175 * This section sets support for features that are or are not needed
176 * within the modules that are enabled.
177 * \{
178 */
179
180 /**
181 * \def POLARSSL_TIMING_ALT
182 *
183 * Uncomment to provide your own alternate implementation for hardclock(),
184 * get_timer(), set_alarm() and m_sleep().
185 *
186 * Only works if you have POLARSSL_TIMING_C enabled.
187 *
188 * You will need to provide a header "timing_alt.h" and an implementation at
189 * compile time.
190 */
191 //#define POLARSSL_TIMING_ALT
192
193 /**
194 * \def POLARSSL_XXX_ALT
195 *
196 * Uncomment a macro to let PolarSSL use your alternate core implementation of
197 * a symmetric or hash algorithm (e.g. platform specific assembly optimized
198 * implementations). Keep in mind that the function prototypes should remain
199 * the same.
200 *
201 * Example: In case you uncomment POLARSSL_AES_ALT, PolarSSL will no longer
202 * provide the "struct aes_context" definition and omit the base function
203 * declarations and implementations. "aes_alt.h" will be included from
204 * "aes.h" to include the new function definitions.
205 *
206 * Uncomment a macro to enable alternate implementation for core algorithm
207 * functions
208 */
209 //#define POLARSSL_AES_ALT
210 //#define POLARSSL_ARC4_ALT
211 //#define POLARSSL_BLOWFISH_ALT
212 //#define POLARSSL_CAMELLIA_ALT
213 //#define POLARSSL_DES_ALT
214 //#define POLARSSL_XTEA_ALT
215 //#define POLARSSL_MD2_ALT
216 //#define POLARSSL_MD4_ALT
217 //#define POLARSSL_MD5_ALT
218 //#define POLARSSL_RIPEMD160_ALT
219 //#define POLARSSL_SHA1_ALT
220 //#define POLARSSL_SHA256_ALT
221 //#define POLARSSL_SHA512_ALT
222
223 /**
224 * \def POLARSSL_AES_ROM_TABLES
225 *
226 * Store the AES tables in ROM.
227 *
228 * Uncomment this macro to store the AES tables in ROM.
229 *
230 */
231 //#define POLARSSL_AES_ROM_TABLES
232
233 /**
234 * \def POLARSSL_CIPHER_MODE_CBC
235 *
236 * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
237 */
238 #define POLARSSL_CIPHER_MODE_CBC
239
240 /**
241 * \def POLARSSL_CIPHER_MODE_CFB
242 *
243 * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
244 */
245 #define POLARSSL_CIPHER_MODE_CFB
246
247 /**
248 * \def POLARSSL_CIPHER_MODE_CTR
249 *
250 * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
251 */
252 #define POLARSSL_CIPHER_MODE_CTR
253
254 /**
255 * \def POLARSSL_CIPHER_NULL_CIPHER
256 *
257 * Enable NULL cipher.
258 * Warning: Only do so when you know what you are doing. This allows for
259 * encryption or channels without any security!
260 *
261 * Requires POLARSSL_ENABLE_WEAK_CIPHERSUITES as well to enable
262 * the following ciphersuites:
263 * TLS_ECDH_ECDSA_WITH_NULL_SHA
264 * TLS_ECDH_RSA_WITH_NULL_SHA
265 * TLS_ECDHE_ECDSA_WITH_NULL_SHA
266 * TLS_ECDHE_RSA_WITH_NULL_SHA
267 * TLS_ECDHE_PSK_WITH_NULL_SHA384
268 * TLS_ECDHE_PSK_WITH_NULL_SHA256
269 * TLS_ECDHE_PSK_WITH_NULL_SHA
270 * TLS_DHE_PSK_WITH_NULL_SHA384
271 * TLS_DHE_PSK_WITH_NULL_SHA256
272 * TLS_DHE_PSK_WITH_NULL_SHA
273 * TLS_RSA_WITH_NULL_SHA256
274 * TLS_RSA_WITH_NULL_SHA
275 * TLS_RSA_WITH_NULL_MD5
276 * TLS_RSA_PSK_WITH_NULL_SHA384
277 * TLS_RSA_PSK_WITH_NULL_SHA256
278 * TLS_RSA_PSK_WITH_NULL_SHA
279 * TLS_PSK_WITH_NULL_SHA384
280 * TLS_PSK_WITH_NULL_SHA256
281 * TLS_PSK_WITH_NULL_SHA
282 *
283 * Uncomment this macro to enable the NULL cipher and ciphersuites
284 */
285 //#define POLARSSL_CIPHER_NULL_CIPHER
286
287 /**
288 * \def POLARSSL_CIPHER_PADDING_XXX
289 *
290 * Uncomment or comment macros to add support for specific padding modes
291 * in the cipher layer with cipher modes that support padding (e.g. CBC)
292 *
293 * If you disable all padding modes, only full blocks can be used with CBC.
294 *
295 * Enable padding modes in the cipher layer.
296 */
297 #define POLARSSL_CIPHER_PADDING_PKCS7
298 #define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS
299 #define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN
300 #define POLARSSL_CIPHER_PADDING_ZEROS
301
302 /**
303 * \def POLARSSL_ENABLE_WEAK_CIPHERSUITES
304 *
305 * Enable weak ciphersuites in SSL / TLS.
306 * Warning: Only do so when you know what you are doing. This allows for
307 * channels with virtually no security at all!
308 *
309 * This enables the following ciphersuites:
310 * TLS_RSA_WITH_DES_CBC_SHA
311 * TLS_DHE_RSA_WITH_DES_CBC_SHA
312 *
313 * Uncomment this macro to enable weak ciphersuites
314 */
315 //#define POLARSSL_ENABLE_WEAK_CIPHERSUITES
316
317 /**
318 * \def POLARSSL_REMOVE_ARC4_CIPHERSUITES
319 *
320 * Remove RC4 ciphersuites by default in SSL / TLS.
321 * This flag removes the ciphersuites based on RC4 from the default list as
322 * returned by ssl_list_ciphersuites(). However, it is still possible to
323 * enable (some of) them with ssl_set_ciphersuites() by including them
324 * explicitly.
325 *
326 * Uncomment this macro to remove RC4 ciphersuites by default.
327 */
328 //#define POLARSSL_REMOVE_ARC4_CIPHERSUITES
329
330 /**
331 * \def POLARSSL_ECP_XXXX_ENABLED
332 *
333 * Enables specific curves within the Elliptic Curve module.
334 * By default all supported curves are enabled.
335 *
336 * Comment macros to disable the curve and functions for it
337 */
338 #define POLARSSL_ECP_DP_SECP192R1_ENABLED
339 #define POLARSSL_ECP_DP_SECP224R1_ENABLED
340 #define POLARSSL_ECP_DP_SECP256R1_ENABLED
341 #define POLARSSL_ECP_DP_SECP384R1_ENABLED
342 #define POLARSSL_ECP_DP_SECP521R1_ENABLED
343 #define POLARSSL_ECP_DP_SECP192K1_ENABLED
344 #define POLARSSL_ECP_DP_SECP224K1_ENABLED
345 #define POLARSSL_ECP_DP_SECP256K1_ENABLED
346 #define POLARSSL_ECP_DP_BP256R1_ENABLED
347 #define POLARSSL_ECP_DP_BP384R1_ENABLED
348 #define POLARSSL_ECP_DP_BP512R1_ENABLED
349 //#define POLARSSL_ECP_DP_M221_ENABLED // Not implemented yet!
350 #define POLARSSL_ECP_DP_M255_ENABLED
351 //#define POLARSSL_ECP_DP_M383_ENABLED // Not implemented yet!
352 //#define POLARSSL_ECP_DP_M511_ENABLED // Not implemented yet!
353
354 /**
355 * \def POLARSSL_ECP_NIST_OPTIM
356 *
357 * Enable specific 'modulo p' routines for each NIST prime.
358 * Depending on the prime and architecture, makes operations 4 to 8 times
359 * faster on the corresponding curve.
360 *
361 * Comment this macro to disable NIST curves optimisation.
362 */
363 #define POLARSSL_ECP_NIST_OPTIM
364
365 /**
366 * \def POLARSSL_ECDSA_DETERMINISTIC
367 *
368 * Enable deterministic ECDSA (RFC 6979).
369 * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
370 * may result in a compromise of the long-term signing key. This is avoided by
371 * the deterministic variant.
372 *
373 * Requires: POLARSSL_HMAC_DRBG_C
374 *
375 * Comment this macro to disable deterministic ECDSA.
376 */
377 #define POLARSSL_ECDSA_DETERMINISTIC
378
379 /**
380 * \def POLARSSL_KEY_EXCHANGE_PSK_ENABLED
381 *
382 * Enable the PSK based ciphersuite modes in SSL / TLS.
383 *
384 * This enables the following ciphersuites (if other requisites are
385 * enabled as well):
386 * TLS_PSK_WITH_AES_256_GCM_SHA384
387 * TLS_PSK_WITH_AES_256_CBC_SHA384
388 * TLS_PSK_WITH_AES_256_CBC_SHA
389 * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
390 * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
391 * TLS_PSK_WITH_AES_128_GCM_SHA256
392 * TLS_PSK_WITH_AES_128_CBC_SHA256
393 * TLS_PSK_WITH_AES_128_CBC_SHA
394 * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
395 * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
396 * TLS_PSK_WITH_3DES_EDE_CBC_SHA
397 * TLS_PSK_WITH_RC4_128_SHA
398 */
399 #define POLARSSL_KEY_EXCHANGE_PSK_ENABLED
400
401 /**
402 * \def POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
403 *
404 * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
405 *
406 * Requires: POLARSSL_DHM_C
407 *
408 * This enables the following ciphersuites (if other requisites are
409 * enabled as well):
410 * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
411 * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
412 * TLS_DHE_PSK_WITH_AES_256_CBC_SHA
413 * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
414 * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
415 * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
416 * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
417 * TLS_DHE_PSK_WITH_AES_128_CBC_SHA
418 * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
419 * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
420 * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
421 * TLS_DHE_PSK_WITH_RC4_128_SHA
422 */
423 #define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED
424
425 /**
426 * \def POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
427 *
428 * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
429 *
430 * Requires: POLARSSL_ECDH_C
431 *
432 * This enables the following ciphersuites (if other requisites are
433 * enabled as well):
434 * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
435 * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
436 * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
437 * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
438 * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
439 * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
440 * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
441 * TLS_ECDHE_PSK_WITH_RC4_128_SHA
442 */
443 #define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED
444
445 /**
446 * \def POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
447 *
448 * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
449 *
450 * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
451 * POLARSSL_X509_CRT_PARSE_C
452 *
453 * This enables the following ciphersuites (if other requisites are
454 * enabled as well):
455 * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
456 * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
457 * TLS_RSA_PSK_WITH_AES_256_CBC_SHA
458 * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
459 * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
460 * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
461 * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
462 * TLS_RSA_PSK_WITH_AES_128_CBC_SHA
463 * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
464 * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
465 * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
466 * TLS_RSA_PSK_WITH_RC4_128_SHA
467 */
468 #define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED
469
470 /**
471 * \def POLARSSL_KEY_EXCHANGE_RSA_ENABLED
472 *
473 * Enable the RSA-only based ciphersuite modes in SSL / TLS.
474 *
475 * Requires: POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
476 * POLARSSL_X509_CRT_PARSE_C
477 *
478 * This enables the following ciphersuites (if other requisites are
479 * enabled as well):
480 * TLS_RSA_WITH_AES_256_GCM_SHA384
481 * TLS_RSA_WITH_AES_256_CBC_SHA256
482 * TLS_RSA_WITH_AES_256_CBC_SHA
483 * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
484 * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
485 * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
486 * TLS_RSA_WITH_AES_128_GCM_SHA256
487 * TLS_RSA_WITH_AES_128_CBC_SHA256
488 * TLS_RSA_WITH_AES_128_CBC_SHA
489 * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
490 * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
491 * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
492 * TLS_RSA_WITH_3DES_EDE_CBC_SHA
493 * TLS_RSA_WITH_RC4_128_SHA
494 * TLS_RSA_WITH_RC4_128_MD5
495 */
496 #define POLARSSL_KEY_EXCHANGE_RSA_ENABLED
497
498 /**
499 * \def POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
500 *
501 * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
502 *
503 * Requires: POLARSSL_DHM_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
504 * POLARSSL_X509_CRT_PARSE_C
505 *
506 * This enables the following ciphersuites (if other requisites are
507 * enabled as well):
508 * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
509 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
510 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA
511 * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
512 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
513 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
514 * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
515 * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
516 * TLS_DHE_RSA_WITH_AES_128_CBC_SHA
517 * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
518 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
519 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
520 * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
521 */
522 #define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED
523
524 /**
525 * \def POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
526 *
527 * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
528 *
529 * Requires: POLARSSL_ECDH_C, POLARSSL_RSA_C, POLARSSL_PKCS1_V15,
530 * POLARSSL_X509_CRT_PARSE_C
531 *
532 * This enables the following ciphersuites (if other requisites are
533 * enabled as well):
534 * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
535 * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
536 * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
537 * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
538 * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
539 * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
540 * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
541 * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
542 * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
543 * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
544 * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
545 * TLS_ECDHE_RSA_WITH_RC4_128_SHA
546 */
547 #define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
548
549 /**
550 * \def POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
551 *
552 * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
553 *
554 * Requires: POLARSSL_ECDH_C, POLARSSL_ECDSA_C, POLARSSL_X509_CRT_PARSE_C,
555 *
556 * This enables the following ciphersuites (if other requisites are
557 * enabled as well):
558 * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
559 * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
560 * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
561 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
562 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
563 * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
564 * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
565 * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
566 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
567 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
568 * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
569 * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
570 */
571 #define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
572
573 /**
574 * \def POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
575 *
576 * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
577 *
578 * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
579 *
580 * This enables the following ciphersuites (if other requisites are
581 * enabled as well):
582 * TLS_ECDH_ECDSA_WITH_RC4_128_SHA
583 * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
584 * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
585 * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
586 * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
587 * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
588 * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
589 * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
590 * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
591 * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
592 * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
593 * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
594 */
595 #define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
596
597 /**
598 * \def POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
599 *
600 * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
601 *
602 * Requires: POLARSSL_ECDH_C, POLARSSL_X509_CRT_PARSE_C
603 *
604 * This enables the following ciphersuites (if other requisites are
605 * enabled as well):
606 * TLS_ECDH_RSA_WITH_RC4_128_SHA
607 * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
608 * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
609 * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
610 * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
611 * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
612 * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
613 * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
614 * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
615 * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
616 * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
617 * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
618 */
619 #define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED
620
621 /**
622 * \def POLARSSL_PK_PARSE_EC_EXTENDED
623 *
624 * Enhance support for reading EC keys using variants of SEC1 not allowed by
625 * RFC 5915 and RFC 5480.
626 *
627 * Currently this means parsing the SpecifiedECDomain choice of EC
628 * parameters (only known groups are supported, not arbitrary domains, to
629 * avoid validation issues).
630 *
631 * Disable if you only need to support RFC 5915 + 5480 key formats.
632 */
633 #define POLARSSL_PK_PARSE_EC_EXTENDED
634
635 /**
636 * \def POLARSSL_ERROR_STRERROR_BC
637 *
638 * Make available the backward compatible error_strerror() next to the
639 * current polarssl_strerror().
640 *
641 * For new code, it is recommended to use polarssl_strerror() instead and
642 * disable this.
643 *
644 * Disable if you run into name conflicts and want to really remove the
645 * error_strerror()
646 */
647 #define POLARSSL_ERROR_STRERROR_BC
648
649 /**
650 * \def POLARSSL_ERROR_STRERROR_DUMMY
651 *
652 * Enable a dummy error function to make use of polarssl_strerror() in
653 * third party libraries easier when POLARSSL_ERROR_C is disabled
654 * (no effect when POLARSSL_ERROR_C is enabled).
655 *
656 * You can safely disable this if POLARSSL_ERROR_C is enabled, or if you're
657 * not using polarssl_strerror() or error_strerror() in your application.
658 *
659 * Disable if you run into name conflicts and want to really remove the
660 * polarssl_strerror()
661 */
662 #define POLARSSL_ERROR_STRERROR_DUMMY
663
664 /**
665 * \def POLARSSL_GENPRIME
666 *
667 * Enable the prime-number generation code.
668 *
669 * Requires: POLARSSL_BIGNUM_C
670 */
671 #define POLARSSL_GENPRIME
672
673 /**
674 * \def POLARSSL_FS_IO
675 *
676 * Enable functions that use the filesystem.
677 */
678 #define POLARSSL_FS_IO
679
680 /**
681 * \def POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
682 *
683 * Do not add default entropy sources. These are the platform specific,
684 * hardclock and HAVEGE based poll functions.
685 *
686 * This is useful to have more control over the added entropy sources in an
687 * application.
688 *
689 * Uncomment this macro to prevent loading of default entropy functions.
690 */
691 //#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES
692
693 /**
694 * \def POLARSSL_NO_PLATFORM_ENTROPY
695 *
696 * Do not use built-in platform entropy functions.
697 * This is useful if your platform does not support
698 * standards like the /dev/urandom or Windows CryptoAPI.
699 *
700 * Uncomment this macro to disable the built-in platform entropy functions.
701 */
702 //#define POLARSSL_NO_PLATFORM_ENTROPY
703
704 /**
705 * \def POLARSSL_ENTROPY_FORCE_SHA256
706 *
707 * Force the entropy accumulator to use a SHA-256 accumulator instead of the
708 * default SHA-512 based one (if both are available).
709 *
710 * Requires: POLARSSL_SHA256_C
711 *
712 * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
713 * if you have performance concerns.
714 *
715 * This option is only useful if both POLARSSL_SHA256_C and
716 * POLARSSL_SHA512_C are defined. Otherwise the available hash module is used.
717 */
718 //#define POLARSSL_ENTROPY_FORCE_SHA256
719
720 /**
721 * \def POLARSSL_MEMORY_DEBUG
722 *
723 * Enable debugging of buffer allocator memory issues. Automatically prints
724 * (to stderr) all (fatal) messages on memory allocation issues. Enables
725 * function for 'debug output' of allocated memory.
726 *
727 * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
728 *
729 * Uncomment this macro to let the buffer allocator print out error messages.
730 */
731 //#define POLARSSL_MEMORY_DEBUG
732
733 /**
734 * \def POLARSSL_MEMORY_BACKTRACE
735 *
736 * Include backtrace information with each allocated block.
737 *
738 * Requires: POLARSSL_MEMORY_BUFFER_ALLOC_C
739 * GLIBC-compatible backtrace() an backtrace_symbols() support
740 *
741 * Uncomment this macro to include backtrace information
742 */
743 //#define POLARSSL_MEMORY_BACKTRACE
744
745 /**
746 * \def POLARSSL_PKCS1_V15
747 *
748 * Enable support for PKCS#1 v1.5 encoding.
749 *
750 * Requires: POLARSSL_RSA_C
751 *
752 * This enables support for PKCS#1 v1.5 operations.
753 */
754 #define POLARSSL_PKCS1_V15
755
756 /**
757 * \def POLARSSL_PKCS1_V21
758 *
759 * Enable support for PKCS#1 v2.1 encoding.
760 *
761 * Requires: POLARSSL_MD_C, POLARSSL_RSA_C
762 *
763 * This enables support for RSAES-OAEP and RSASSA-PSS operations.
764 */
765 #define POLARSSL_PKCS1_V21
766
767 /**
768 * \def POLARSSL_RSA_NO_CRT
769 *
770 * Do not use the Chinese Remainder Theorem for the RSA private operation.
771 *
772 * Uncomment this macro to disable the use of CRT in RSA.
773 *
774 */
775 //#define POLARSSL_RSA_NO_CRT
776
777 /**
778 * \def POLARSSL_SELF_TEST
779 *
780 * Enable the checkup functions (*_self_test).
781 */
782 #define POLARSSL_SELF_TEST
783
784 /**
785 * \def POLARSSL_SSL_ALL_ALERT_MESSAGES
786 *
787 * Enable sending of alert messages in case of encountered errors as per RFC.
788 * If you choose not to send the alert messages, PolarSSL can still communicate
789 * with other servers, only debugging of failures is harder.
790 *
791 * The advantage of not sending alert messages, is that no information is given
792 * about reasons for failures thus preventing adversaries of gaining intel.
793 *
794 * Enable sending of all alert messages
795 */
796 #define POLARSSL_SSL_ALERT_MESSAGES
797
798 /**
799 * \def POLARSSL_SSL_DEBUG_ALL
800 *
801 * Enable the debug messages in SSL module for all issues.
802 * Debug messages have been disabled in some places to prevent timing
803 * attacks due to (unbalanced) debugging function calls.
804 *
805 * If you need all error reporting you should enable this during debugging,
806 * but remove this for production servers that should log as well.
807 *
808 * Uncomment this macro to report all debug messages on errors introducing
809 * a timing side-channel.
810 *
811 */
812 //#define POLARSSL_SSL_DEBUG_ALL
813
814 /**
815 * \def POLARSSL_SSL_HW_RECORD_ACCEL
816 *
817 * Enable hooking functions in SSL module for hardware acceleration of
818 * individual records.
819 *
820 * Uncomment this macro to enable hooking functions.
821 */
822 //#define POLARSSL_SSL_HW_RECORD_ACCEL
823
824 /**
825 * \def POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
826 *
827 * Enable support for receiving and parsing SSLv2 Client Hello messages for the
828 * SSL Server module (POLARSSL_SSL_SRV_C).
829 *
830 * Comment this macro to disable support for SSLv2 Client Hello messages.
831 */
832 #define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
833
834 /**
835 * \def POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
836 *
837 * Pick the ciphersuite according to the client's preferences rather than ours
838 * in the SSL Server module (POLARSSL_SSL_SRV_C).
839 *
840 * Uncomment this macro to respect client's ciphersuite order
841 */
842 //#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE
843
844 /**
845 * \def POLARSSL_SSL_MAX_FRAGMENT_LENGTH
846 *
847 * Enable support for RFC 6066 max_fragment_length extension in SSL.
848 *
849 * Comment this macro to disable support for the max_fragment_length extension
850 */
851 #define POLARSSL_SSL_MAX_FRAGMENT_LENGTH
852
853 /**
854 * \def POLARSSL_SSL_PROTO_SSL3
855 *
856 * Enable support for SSL 3.0.
857 *
858 * Requires: POLARSSL_MD5_C
859 * POLARSSL_SHA1_C
860 *
861 * Comment this macro to disable support for SSL 3.0
862 */
863 #define POLARSSL_SSL_PROTO_SSL3
864
865 /**
866 * \def POLARSSL_SSL_PROTO_TLS1
867 *
868 * Enable support for TLS 1.0.
869 *
870 * Requires: POLARSSL_MD5_C
871 * POLARSSL_SHA1_C
872 *
873 * Comment this macro to disable support for TLS 1.0
874 */
875 #define POLARSSL_SSL_PROTO_TLS1
876
877 /**
878 * \def POLARSSL_SSL_PROTO_TLS1_1
879 *
880 * Enable support for TLS 1.1.
881 *
882 * Requires: POLARSSL_MD5_C
883 * POLARSSL_SHA1_C
884 *
885 * Comment this macro to disable support for TLS 1.1
886 */
887 #define POLARSSL_SSL_PROTO_TLS1_1
888
889 /**
890 * \def POLARSSL_SSL_PROTO_TLS1_2
891 *
892 * Enable support for TLS 1.2.
893 *
894 * Requires: POLARSSL_SHA1_C or POLARSSL_SHA256_C or POLARSSL_SHA512_C
895 * (Depends on ciphersuites)
896 *
897 * Comment this macro to disable support for TLS 1.2
898 */
899 #define POLARSSL_SSL_PROTO_TLS1_2
900
901 /**
902 * \def POLARSSL_SSL_ALPN
903 *
904 * Enable support for Application Layer Protocol Negotiation.
905 * draft-ietf-tls-applayerprotoneg-05
906 *
907 * Comment this macro to disable support for ALPN.
908 */
909 #define POLARSSL_SSL_ALPN
910
911 /**
912 * \def POLARSSL_SSL_SESSION_TICKETS
913 *
914 * Enable support for RFC 5077 session tickets in SSL.
915 *
916 * Requires: POLARSSL_AES_C
917 * POLARSSL_SHA256_C
918 * POLARSSL_CIPHER_MODE_CBC
919 *
920 * Comment this macro to disable support for SSL session tickets
921 */
922 #define POLARSSL_SSL_SESSION_TICKETS
923
924 /**
925 * \def POLARSSL_SSL_SERVER_NAME_INDICATION
926 *
927 * Enable support for RFC 6066 server name indication (SNI) in SSL.
928 *
929 * Comment this macro to disable support for server name indication in SSL
930 */
931 #define POLARSSL_SSL_SERVER_NAME_INDICATION
932
933 /**
934 * \def POLARSSL_SSL_TRUNCATED_HMAC
935 *
936 * Enable support for RFC 6066 truncated HMAC in SSL.
937 *
938 * Comment this macro to disable support for truncated HMAC in SSL
939 */
940 #define POLARSSL_SSL_TRUNCATED_HMAC
941
942 /**
943 * \def POLARSSL_SSL_SET_CURVES
944 *
945 * Enable ssl_set_curves().
946 *
947 * This is disabled by default since it breaks binary compatibility with the
948 * 1.3.x line. If you choose to enable it, you will need to rebuild your
949 * application against the new header files, relinking will not be enough.
950 * It will be enabled by default, or no longer an option, in the 1.4 branch.
951 *
952 * Uncomment to make ssl_set_curves() available.
953 */
954 //#define POLARSSL_SSL_SET_CURVES
955
956 /**
957 * \def POLARSSL_THREADING_ALT
958 *
959 * Provide your own alternate threading implementation.
960 *
961 * Requires: POLARSSL_THREADING_C
962 *
963 * Uncomment this to allow your own alternate threading implementation.
964 */
965 //#define POLARSSL_THREADING_ALT
966
967 /**
968 * \def POLARSSL_THREADING_PTHREAD
969 *
970 * Enable the pthread wrapper layer for the threading layer.
971 *
972 * Requires: POLARSSL_THREADING_C
973 *
974 * Uncomment this to enable pthread mutexes.
975 */
976 //#define POLARSSL_THREADING_PTHREAD
977
978 /**
979 * \def POLARSSL_VERSION_FEATURES
980 *
981 * Allow run-time checking of compile-time enabled features. Thus allowing users
982 * to check at run-time if the library is for instance compiled with threading
983 * support via version_check_feature().
984 *
985 * Requires: POLARSSL_VERSION_C
986 *
987 * Comment this to disable run-time checking and save ROM space
988 */
989 #define POLARSSL_VERSION_FEATURES
990
991 /**
992 * \def POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
993 *
994 * If set, the X509 parser will not break-off when parsing an X509 certificate
995 * and encountering an extension in a v1 or v2 certificate.
996 *
997 * Uncomment to prevent an error.
998 */
999 //#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3
1000
1001 /**
1002 * \def POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
1003 *
1004 * If set, the X509 parser will not break-off when parsing an X509 certificate
1005 * and encountering an unknown critical extension.
1006 *
1007 * Uncomment to prevent an error.
1008 */
1009 //#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
1010
1011 /**
1012 * \def POLARSSL_X509_CHECK_KEY_USAGE
1013 *
1014 * Enable verification of the keyUsage extension (CA and leaf certificates).
1015 *
1016 * Disabling this avoids problems with mis-issued and/or misused
1017 * (intermediate) CA and leaf certificates.
1018 *
1019 * \warning Depending on your PKI use, disabling this can be a security risk!
1020 *
1021 * Comment to skip keyUsage checking for both CA and leaf certificates.
1022 */
1023 #define POLARSSL_X509_CHECK_KEY_USAGE
1024
1025 /**
1026 * \def POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
1027 *
1028 * Enable verification of the extendedKeyUsage extension (leaf certificates).
1029 *
1030 * Disabling this avoids problems with mis-issued and/or misused certificates.
1031 *
1032 * \warning Depending on your PKI use, disabling this can be a security risk!
1033 *
1034 * Comment to skip extendedKeyUsage checking for certificates.
1035 */
1036 #define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE
1037
1038 /**
1039 * \def POLARSSL_X509_RSASSA_PSS_SUPPORT
1040 *
1041 * Enable parsing and verification of X.509 certificates, CRLs and CSRS
1042 * signed with RSASSA-PSS (aka PKCS#1 v2.1).
1043 *
1044 * Comment this macro to disallow using RSASSA-PSS in certificates.
1045 */
1046 #define POLARSSL_X509_RSASSA_PSS_SUPPORT
1047
1048 /**
1049 * \def POLARSSL_ZLIB_SUPPORT
1050 *
1051 * If set, the SSL/TLS module uses ZLIB to support compression and
1052 * decompression of packet data.
1053 *
1054 * \warning TLS-level compression MAY REDUCE SECURITY! See for example the
1055 * CRIME attack. Before enabling this option, you should examine with care if
1056 * CRIME or similar exploits may be a applicable to your use case.
1057 *
1058 * Used in: library/ssl_tls.c
1059 * library/ssl_cli.c
1060 * library/ssl_srv.c
1061 *
1062 * This feature requires zlib library and headers to be present.
1063 *
1064 * Uncomment to enable use of ZLIB
1065 */
1066 //#define POLARSSL_ZLIB_SUPPORT
1067 /* \} name SECTION: PolarSSL feature support */
1068
1069 /**
1070 * \name SECTION: PolarSSL modules
1071 *
1072 * This section enables or disables entire modules in PolarSSL
1073 * \{
1074 */
1075
1076 /**
1077 * \def POLARSSL_AESNI_C
1078 *
1079 * Enable AES-NI support on x86-64.
1080 *
1081 * Module: library/aesni.c
1082 * Caller: library/aes.c
1083 *
1084 * Requires: POLARSSL_HAVE_ASM
1085 *
1086 * This modules adds support for the AES-NI instructions on x86-64
1087 */
1088 //#define POLARSSL_AESNI_C
1089
1090 /**
1091 * \def POLARSSL_AES_C
1092 *
1093 * Enable the AES block cipher.
1094 *
1095 * Module: library/aes.c
1096 * Caller: library/ssl_tls.c
1097 * library/pem.c
1098 * library/ctr_drbg.c
1099 *
1100 * This module enables the following ciphersuites (if other requisites are
1101 * enabled as well):
1102 * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
1103 * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
1104 * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
1105 * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
1106 * TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
1107 * TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
1108 * TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
1109 * TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
1110 * TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
1111 * TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
1112 * TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
1113 * TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
1114 * TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
1115 * TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
1116 * TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
1117 * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
1118 * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
1119 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
1120 * TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
1121 * TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
1122 * TLS_DHE_RSA_WITH_AES_256_CBC_SHA
1123 * TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
1124 * TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
1125 * TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
1126 * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
1127 * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
1128 * TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
1129 * TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
1130 * TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
1131 * TLS_DHE_RSA_WITH_AES_128_CBC_SHA
1132 * TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
1133 * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
1134 * TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
1135 * TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
1136 * TLS_DHE_PSK_WITH_AES_256_CBC_SHA
1137 * TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
1138 * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
1139 * TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
1140 * TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
1141 * TLS_DHE_PSK_WITH_AES_128_CBC_SHA
1142 * TLS_RSA_WITH_AES_256_GCM_SHA384
1143 * TLS_RSA_WITH_AES_256_CBC_SHA256
1144 * TLS_RSA_WITH_AES_256_CBC_SHA
1145 * TLS_RSA_WITH_AES_128_GCM_SHA256
1146 * TLS_RSA_WITH_AES_128_CBC_SHA256
1147 * TLS_RSA_WITH_AES_128_CBC_SHA
1148 * TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
1149 * TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
1150 * TLS_RSA_PSK_WITH_AES_256_CBC_SHA
1151 * TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
1152 * TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
1153 * TLS_RSA_PSK_WITH_AES_128_CBC_SHA
1154 * TLS_PSK_WITH_AES_256_GCM_SHA384
1155 * TLS_PSK_WITH_AES_256_CBC_SHA384
1156 * TLS_PSK_WITH_AES_256_CBC_SHA
1157 * TLS_PSK_WITH_AES_128_GCM_SHA256
1158 * TLS_PSK_WITH_AES_128_CBC_SHA256
1159 * TLS_PSK_WITH_AES_128_CBC_SHA
1160 *
1161 * PEM_PARSE uses AES for decrypting encrypted keys.
1162 */
1163 #define POLARSSL_AES_C
1164
1165 /**
1166 * \def POLARSSL_ARC4_C
1167 *
1168 * Enable the ARCFOUR stream cipher.
1169 *
1170 * Module: library/arc4.c
1171 * Caller: library/ssl_tls.c
1172 *
1173 * This module enables the following ciphersuites (if other requisites are
1174 * enabled as well):
1175 * TLS_ECDH_ECDSA_WITH_RC4_128_SHA
1176 * TLS_ECDH_RSA_WITH_RC4_128_SHA
1177 * TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
1178 * TLS_ECDHE_RSA_WITH_RC4_128_SHA
1179 * TLS_ECDHE_PSK_WITH_RC4_128_SHA
1180 * TLS_DHE_PSK_WITH_RC4_128_SHA
1181 * TLS_RSA_WITH_RC4_128_SHA
1182 * TLS_RSA_WITH_RC4_128_MD5
1183 * TLS_RSA_PSK_WITH_RC4_128_SHA
1184 * TLS_PSK_WITH_RC4_128_SHA
1185 */
1186 #define POLARSSL_ARC4_C
1187
1188 /**
1189 * \def POLARSSL_ASN1_PARSE_C
1190 *
1191 * Enable the generic ASN1 parser.
1192 *
1193 * Module: library/asn1.c
1194 * Caller: library/x509.c
1195 * library/dhm.c
1196 * library/pkcs12.c
1197 * library/pkcs5.c
1198 * library/pkparse.c
1199 */
1200 #define POLARSSL_ASN1_PARSE_C
1201
1202 /**
1203 * \def POLARSSL_ASN1_WRITE_C
1204 *
1205 * Enable the generic ASN1 writer.
1206 *
1207 * Module: library/asn1write.c
1208 * Caller: library/ecdsa.c
1209 * library/pkwrite.c
1210 * library/x509_create.c
1211 * library/x509write_crt.c
1212 * library/x509write_csr.c
1213 */
1214 #define POLARSSL_ASN1_WRITE_C
1215
1216 /**
1217 * \def POLARSSL_BASE64_C
1218 *
1219 * Enable the Base64 module.
1220 *
1221 * Module: library/base64.c
1222 * Caller: library/pem.c
1223 *
1224 * This module is required for PEM support (required by X.509).
1225 */
1226 #define POLARSSL_BASE64_C
1227
1228 /**
1229 * \def POLARSSL_BIGNUM_C
1230 *
1231 * Enable the multi-precision integer library.
1232 *
1233 * Module: library/bignum.c
1234 * Caller: library/dhm.c
1235 * library/ecp.c
1236 * library/ecdsa.c
1237 * library/rsa.c
1238 * library/ssl_tls.c
1239 *
1240 * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
1241 */
1242 #define POLARSSL_BIGNUM_C
1243
1244 /**
1245 * \def POLARSSL_BLOWFISH_C
1246 *
1247 * Enable the Blowfish block cipher.
1248 *
1249 * Module: library/blowfish.c
1250 */
1251 #define POLARSSL_BLOWFISH_C
1252
1253 /**
1254 * \def POLARSSL_CAMELLIA_C
1255 *
1256 * Enable the Camellia block cipher.
1257 *
1258 * Module: library/camellia.c
1259 * Caller: library/ssl_tls.c
1260 *
1261 * This module enables the following ciphersuites (if other requisites are
1262 * enabled as well):
1263 * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
1264 * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
1265 * TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
1266 * TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
1267 * TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
1268 * TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
1269 * TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
1270 * TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
1271 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
1272 * TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
1273 * TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
1274 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
1275 * TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
1276 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
1277 * TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
1278 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
1279 * TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
1280 * TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
1281 * TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
1282 * TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
1283 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
1284 * TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
1285 * TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
1286 * TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
1287 * TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
1288 * TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
1289 * TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
1290 * TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
1291 * TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
1292 * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
1293 * TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
1294 * TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
1295 * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
1296 * TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
1297 * TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
1298 * TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
1299 * TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
1300 * TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
1301 * TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
1302 * TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
1303 * TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
1304 * TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
1305 */
1306 #define POLARSSL_CAMELLIA_C
1307
1308 /**
1309 * \def POLARSSL_CCM_C
1310 *
1311 * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
1312 *
1313 * Module: library/ccm.c
1314 *
1315 * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
1316 *
1317 * This module enables the AES-CCM ciphersuites, if other requisites are
1318 * enabled as well.
1319 */
1320 #define POLARSSL_CCM_C
1321
1322 /**
1323 * \def POLARSSL_CERTS_C
1324 *
1325 * Enable the test certificates.
1326 *
1327 * Module: library/certs.c
1328 * Caller:
1329 *
1330 * Requires: POLARSSL_PEM_PARSE_C
1331 *
1332 * This module is used for testing (ssl_client/server).
1333 */
1334 #define POLARSSL_CERTS_C
1335
1336 /**
1337 * \def POLARSSL_CIPHER_C
1338 *
1339 * Enable the generic cipher layer.
1340 *
1341 * Module: library/cipher.c
1342 * Caller: library/ssl_tls.c
1343 *
1344 * Uncomment to enable generic cipher wrappers.
1345 */
1346 #define POLARSSL_CIPHER_C
1347
1348 /**
1349 * \def POLARSSL_CTR_DRBG_C
1350 *
1351 * Enable the CTR_DRBG AES-256-based random generator.
1352 *
1353 * Module: library/ctr_drbg.c
1354 * Caller:
1355 *
1356 * Requires: POLARSSL_AES_C
1357 *
1358 * This module provides the CTR_DRBG AES-256 random number generator.
1359 */
1360 #define POLARSSL_CTR_DRBG_C
1361
1362 /**
1363 * \def POLARSSL_DEBUG_C
1364 *
1365 * Enable the debug functions.
1366 *
1367 * Module: library/debug.c
1368 * Caller: library/ssl_cli.c
1369 * library/ssl_srv.c
1370 * library/ssl_tls.c
1371 *
1372 * This module provides debugging functions.
1373 */
1374 #define POLARSSL_DEBUG_C
1375
1376 /**
1377 * \def POLARSSL_DES_C
1378 *
1379 * Enable the DES block cipher.
1380 *
1381 * Module: library/des.c
1382 * Caller: library/pem.c
1383 * library/ssl_tls.c
1384 *
1385 * This module enables the following ciphersuites (if other requisites are
1386 * enabled as well):
1387 * TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
1388 * TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
1389 * TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
1390 * TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
1391 * TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
1392 * TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
1393 * TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
1394 * TLS_RSA_WITH_3DES_EDE_CBC_SHA
1395 * TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
1396 * TLS_PSK_WITH_3DES_EDE_CBC_SHA
1397 *
1398 * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
1399 */
1400 #define POLARSSL_DES_C
1401
1402 /**
1403 * \def POLARSSL_DHM_C
1404 *
1405 * Enable the Diffie-Hellman-Merkle module.
1406 *
1407 * Module: library/dhm.c
1408 * Caller: library/ssl_cli.c
1409 * library/ssl_srv.c
1410 *
1411 * This module is used by the following key exchanges:
1412 * DHE-RSA, DHE-PSK
1413 */
1414 #define POLARSSL_DHM_C
1415
1416 /**
1417 * \def POLARSSL_ECDH_C
1418 *
1419 * Enable the elliptic curve Diffie-Hellman library.
1420 *
1421 * Module: library/ecdh.c
1422 * Caller: library/ssl_cli.c
1423 * library/ssl_srv.c
1424 *
1425 * This module is used by the following key exchanges:
1426 * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
1427 *
1428 * Requires: POLARSSL_ECP_C
1429 */
1430 #define POLARSSL_ECDH_C
1431
1432 /**
1433 * \def POLARSSL_ECDSA_C
1434 *
1435 * Enable the elliptic curve DSA library.
1436 *
1437 * Module: library/ecdsa.c
1438 * Caller:
1439 *
1440 * This module is used by the following key exchanges:
1441 * ECDHE-ECDSA
1442 *
1443 * Requires: POLARSSL_ECP_C, POLARSSL_ASN1_WRITE_C, POLARSSL_ASN1_PARSE_C
1444 */
1445 #define POLARSSL_ECDSA_C
1446
1447 /**
1448 * \def POLARSSL_ECP_C
1449 *
1450 * Enable the elliptic curve over GF(p) library.
1451 *
1452 * Module: library/ecp.c
1453 * Caller: library/ecdh.c
1454 * library/ecdsa.c
1455 *
1456 * Requires: POLARSSL_BIGNUM_C and at least one POLARSSL_ECP_DP_XXX_ENABLED
1457 */
1458 #define POLARSSL_ECP_C
1459
1460 /**
1461 * \def POLARSSL_ENTROPY_C
1462 *
1463 * Enable the platform-specific entropy code.
1464 *
1465 * Module: library/entropy.c
1466 * Caller:
1467 *
1468 * Requires: POLARSSL_SHA512_C or POLARSSL_SHA256_C
1469 *
1470 * This module provides a generic entropy pool
1471 */
1472 #define POLARSSL_ENTROPY_C
1473
1474 /**
1475 * \def POLARSSL_ERROR_C
1476 *
1477 * Enable error code to error string conversion.
1478 *
1479 * Module: library/error.c
1480 * Caller:
1481 *
1482 * This module enables polarssl_strerror().
1483 */
1484 #define POLARSSL_ERROR_C
1485
1486 /**
1487 * \def POLARSSL_GCM_C
1488 *
1489 * Enable the Galois/Counter Mode (GCM) for AES.
1490 *
1491 * Module: library/gcm.c
1492 *
1493 * Requires: POLARSSL_AES_C or POLARSSL_CAMELLIA_C
1494 *
1495 * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
1496 * requisites are enabled as well.
1497 */
1498 #define POLARSSL_GCM_C
1499
1500 /**
1501 * \def POLARSSL_HAVEGE_C
1502 *
1503 * Enable the HAVEGE random generator.
1504 *
1505 * Warning: the HAVEGE random generator is not suitable for virtualized
1506 * environments
1507 *
1508 * Warning: the HAVEGE random generator is dependent on timing and specific
1509 * processor traits. It is therefore not advised to use HAVEGE as
1510 * your applications primary random generator or primary entropy pool
1511 * input. As a secondary input to your entropy pool, it IS able add
1512 * the (limited) extra entropy it provides.
1513 *
1514 * Module: library/havege.c
1515 * Caller:
1516 *
1517 * Requires: POLARSSL_TIMING_C
1518 *
1519 * Uncomment to enable the HAVEGE random generator.
1520 */
1521 //#define POLARSSL_HAVEGE_C
1522
1523 /**
1524 * \def POLARSSL_HMAC_DRBG_C
1525 *
1526 * Enable the HMAC_DRBG random generator.
1527 *
1528 * Module: library/hmac_drbg.c
1529 * Caller:
1530 *
1531 * Requires: POLARSSL_MD_C
1532 *
1533 * Uncomment to enable the HMAC_DRBG random number geerator.
1534 */
1535 #define POLARSSL_HMAC_DRBG_C
1536
1537 /**
1538 * \def POLARSSL_MD_C
1539 *
1540 * Enable the generic message digest layer.
1541 *
1542 * Module: library/md.c
1543 * Caller:
1544 *
1545 * Uncomment to enable generic message digest wrappers.
1546 */
1547 #define POLARSSL_MD_C
1548
1549 /**
1550 * \def POLARSSL_MD2_C
1551 *
1552 * Enable the MD2 hash algorithm.
1553 *
1554 * Module: library/md2.c
1555 * Caller:
1556 *
1557 * Uncomment to enable support for (rare) MD2-signed X.509 certs.
1558 */
1559 //#define POLARSSL_MD2_C
1560
1561 /**
1562 * \def POLARSSL_MD4_C
1563 *
1564 * Enable the MD4 hash algorithm.
1565 *
1566 * Module: library/md4.c
1567 * Caller:
1568 *
1569 * Uncomment to enable support for (rare) MD4-signed X.509 certs.
1570 */
1571 //#define POLARSSL_MD4_C
1572
1573 /**
1574 * \def POLARSSL_MD5_C
1575 *
1576 * Enable the MD5 hash algorithm.
1577 *
1578 * Module: library/md5.c
1579 * Caller: library/md.c
1580 * library/pem.c
1581 * library/ssl_tls.c
1582 *
1583 * This module is required for SSL/TLS and X.509.
1584 * PEM_PARSE uses MD5 for decrypting encrypted keys.
1585 */
1586 #define POLARSSL_MD5_C
1587
1588 /**
1589 * \def POLARSSL_MEMORY_C
1590 * Deprecated since 1.3.5. Please use POLARSSL_PLATFORM_MEMORY instead.
1591 */
1592 //#define POLARSSL_MEMORY_C
1593
1594 /**
1595 * \def POLARSSL_MEMORY_BUFFER_ALLOC_C
1596 *
1597 * Enable the buffer allocator implementation that makes use of a (stack)
1598 * based buffer to 'allocate' dynamic memory. (replaces malloc() and free()
1599 * calls)
1600 *
1601 * Module: library/memory_buffer_alloc.c
1602 *
1603 * Requires: POLARSSL_PLATFORM_C
1604 * POLARSSL_PLATFORM_MEMORY (to use it within PolarSSL)
1605 *
1606 * Enable this module to enable the buffer memory allocator.
1607 */
1608 //#define POLARSSL_MEMORY_BUFFER_ALLOC_C
1609
1610 /**
1611 * \def POLARSSL_NET_C
1612 *
1613 * Enable the TCP/IP networking routines.
1614 *
1615 * Module: library/net.c
1616 *
1617 * This module provides TCP/IP networking routines.
1618 */
1619 #define POLARSSL_NET_C
1620
1621 /**
1622 * \def POLARSSL_OID_C
1623 *
1624 * Enable the OID database.
1625 *
1626 * Module: library/oid.c
1627 * Caller: library/asn1write.c
1628 * library/pkcs5.c
1629 * library/pkparse.c
1630 * library/pkwrite.c
1631 * library/rsa.c
1632 * library/x509.c
1633 * library/x509_create.c
1634 * library/x509_crl.c
1635 * library/x509_crt.c
1636 * library/x509_csr.c
1637 * library/x509write_crt.c
1638 * library/x509write_csr.c
1639 *
1640 * This modules translates between OIDs and internal values.
1641 */
1642 #define POLARSSL_OID_C
1643
1644 /**
1645 * \def POLARSSL_PADLOCK_C
1646 *
1647 * Enable VIA Padlock support on x86.
1648 *
1649 * Module: library/padlock.c
1650 * Caller: library/aes.c
1651 *
1652 * Requires: POLARSSL_HAVE_ASM
1653 *
1654 * This modules adds support for the VIA PadLock on x86.
1655 */
1656 //#define POLARSSL_PADLOCK_C
1657
1658 /**
1659 * \def POLARSSL_PBKDF2_C
1660 *
1661 * Enable PKCS#5 PBKDF2 key derivation function.
1662 * DEPRECATED: Use POLARSSL_PKCS5_C instead
1663 *
1664 * Module: library/pbkdf2.c
1665 *
1666 * Requires: POLARSSL_PKCS5_C
1667 *
1668 * This module adds support for the PKCS#5 PBKDF2 key derivation function.
1669 */
1670 #define POLARSSL_PBKDF2_C
1671
1672 /**
1673 * \def POLARSSL_PEM_PARSE_C
1674 *
1675 * Enable PEM decoding / parsing.
1676 *
1677 * Module: library/pem.c
1678 * Caller: library/dhm.c
1679 * library/pkparse.c
1680 * library/x509_crl.c
1681 * library/x509_crt.c
1682 * library/x509_csr.c
1683 *
1684 * Requires: POLARSSL_BASE64_C
1685 *
1686 * This modules adds support for decoding / parsing PEM files.
1687 */
1688 #define POLARSSL_PEM_PARSE_C
1689
1690 /**
1691 * \def POLARSSL_PEM_WRITE_C
1692 *
1693 * Enable PEM encoding / writing.
1694 *
1695 * Module: library/pem.c
1696 * Caller: library/pkwrite.c
1697 * library/x509write_crt.c
1698 * library/x509write_csr.c
1699 *
1700 * Requires: POLARSSL_BASE64_C
1701 *
1702 * This modules adds support for encoding / writing PEM files.
1703 */
1704 #define POLARSSL_PEM_WRITE_C
1705
1706 /**
1707 * \def POLARSSL_PK_C
1708 *
1709 * Enable the generic public (asymetric) key layer.
1710 *
1711 * Module: library/pk.c
1712 * Caller: library/ssl_tls.c
1713 * library/ssl_cli.c
1714 * library/ssl_srv.c
1715 *
1716 * Requires: POLARSSL_RSA_C or POLARSSL_ECP_C
1717 *
1718 * Uncomment to enable generic public key wrappers.
1719 */
1720 #define POLARSSL_PK_C
1721
1722 /**
1723 * \def POLARSSL_PK_PARSE_C
1724 *
1725 * Enable the generic public (asymetric) key parser.
1726 *
1727 * Module: library/pkparse.c
1728 * Caller: library/x509_crt.c
1729 * library/x509_csr.c
1730 *
1731 * Requires: POLARSSL_PK_C
1732 *
1733 * Uncomment to enable generic public key parse functions.
1734 */
1735 #define POLARSSL_PK_PARSE_C
1736
1737 /**
1738 * \def POLARSSL_PK_WRITE_C
1739 *
1740 * Enable the generic public (asymetric) key writer.
1741 *
1742 * Module: library/pkwrite.c
1743 * Caller: library/x509write.c
1744 *
1745 * Requires: POLARSSL_PK_C
1746 *
1747 * Uncomment to enable generic public key write functions.
1748 */
1749 #define POLARSSL_PK_WRITE_C
1750
1751 /**
1752 * \def POLARSSL_PKCS5_C
1753 *
1754 * Enable PKCS#5 functions.
1755 *
1756 * Module: library/pkcs5.c
1757 *
1758 * Requires: POLARSSL_MD_C
1759 *
1760 * This module adds support for the PKCS#5 functions.
1761 */
1762 #define POLARSSL_PKCS5_C
1763
1764 /**
1765 * \def POLARSSL_PKCS11_C
1766 *
1767 * Enable wrapper for PKCS#11 smartcard support.
1768 *
1769 * Module: library/pkcs11.c
1770 * Caller: library/pk.c
1771 *
1772 * Requires: POLARSSL_PK_C
1773 *
1774 * This module enables SSL/TLS PKCS #11 smartcard support.
1775 * Requires the presence of the PKCS#11 helper library (libpkcs11-helper)
1776 */
1777 //#define POLARSSL_PKCS11_C
1778
1779 /**
1780 * \def POLARSSL_PKCS12_C
1781 *
1782 * Enable PKCS#12 PBE functions.
1783 * Adds algorithms for parsing PKCS#8 encrypted private keys
1784 *
1785 * Module: library/pkcs12.c
1786 * Caller: library/pkparse.c
1787 *
1788 * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_CIPHER_C, POLARSSL_MD_C
1789 * Can use: POLARSSL_ARC4_C
1790 *
1791 * This module enables PKCS#12 functions.
1792 */
1793 #define POLARSSL_PKCS12_C
1794
1795 /**
1796 * \def POLARSSL_PLATFORM_C
1797 *
1798 * Enable the platform abstraction layer that allows you to re-assign
1799 * functions like malloc(), free(), printf(), fprintf()
1800 *
1801 * Module: library/platform.c
1802 * Caller: Most other .c files
1803 *
1804 * This module enables abstraction of common (libc) functions.
1805 */
1806 //#define POLARSSL_PLATFORM_C
1807
1808 /**
1809 * \def POLARSSL_RIPEMD160_C
1810 *
1811 * Enable the RIPEMD-160 hash algorithm.
1812 *
1813 * Module: library/ripemd160.c
1814 * Caller: library/md.c
1815 *
1816 */
1817 #define POLARSSL_RIPEMD160_C
1818
1819 /**
1820 * \def POLARSSL_RSA_C
1821 *
1822 * Enable the RSA public-key cryptosystem.
1823 *
1824 * Module: library/rsa.c
1825 * Caller: library/ssl_cli.c
1826 * library/ssl_srv.c
1827 * library/ssl_tls.c
1828 * library/x509.c
1829 *
1830 * This module is used by the following key exchanges:
1831 * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
1832 *
1833 * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C
1834 */
1835 #define POLARSSL_RSA_C
1836
1837 /**
1838 * \def POLARSSL_SHA1_C
1839 *
1840 * Enable the SHA1 cryptographic hash algorithm.
1841 *
1842 * Module: library/sha1.c
1843 * Caller: library/md.c
1844 * library/ssl_cli.c
1845 * library/ssl_srv.c
1846 * library/ssl_tls.c
1847 * library/x509write_crt.c
1848 *
1849 * This module is required for SSL/TLS and SHA1-signed certificates.
1850 */
1851 #define POLARSSL_SHA1_C
1852
1853 /**
1854 * \def POLARSSL_SHA256_C
1855 *
1856 * Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
1857 * (Used to be POLARSSL_SHA2_C)
1858 *
1859 * Module: library/sha256.c
1860 * Caller: library/entropy.c
1861 * library/md.c
1862 * library/ssl_cli.c
1863 * library/ssl_srv.c
1864 * library/ssl_tls.c
1865 *
1866 * This module adds support for SHA-224 and SHA-256.
1867 * This module is required for the SSL/TLS 1.2 PRF function.
1868 */
1869 #define POLARSSL_SHA256_C
1870
1871 /**
1872 * \def POLARSSL_SHA512_C
1873 *
1874 * Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
1875 * (Used to be POLARSSL_SHA4_C)
1876 *
1877 * Module: library/sha512.c
1878 * Caller: library/entropy.c
1879 * library/md.c
1880 * library/ssl_cli.c
1881 * library/ssl_srv.c
1882 *
1883 * This module adds support for SHA-384 and SHA-512.
1884 */
1885 #define POLARSSL_SHA512_C
1886
1887 /**
1888 * \def POLARSSL_SSL_CACHE_C
1889 *
1890 * Enable simple SSL cache implementation.
1891 *
1892 * Module: library/ssl_cache.c
1893 * Caller:
1894 *
1895 * Requires: POLARSSL_SSL_CACHE_C
1896 */
1897 #define POLARSSL_SSL_CACHE_C
1898
1899 /**
1900 * \def POLARSSL_SSL_CLI_C
1901 *
1902 * Enable the SSL/TLS client code.
1903 *
1904 * Module: library/ssl_cli.c
1905 * Caller:
1906 *
1907 * Requires: POLARSSL_SSL_TLS_C
1908 *
1909 * This module is required for SSL/TLS client support.
1910 */
1911 #define POLARSSL_SSL_CLI_C
1912
1913 /**
1914 * \def POLARSSL_SSL_SRV_C
1915 *
1916 * Enable the SSL/TLS server code.
1917 *
1918 * Module: library/ssl_srv.c
1919 * Caller:
1920 *
1921 * Requires: POLARSSL_SSL_TLS_C
1922 *
1923 * This module is required for SSL/TLS server support.
1924 */
1925 #define POLARSSL_SSL_SRV_C
1926
1927 /**
1928 * \def POLARSSL_SSL_TLS_C
1929 *
1930 * Enable the generic SSL/TLS code.
1931 *
1932 * Module: library/ssl_tls.c
1933 * Caller: library/ssl_cli.c
1934 * library/ssl_srv.c
1935 *
1936 * Requires: POLARSSL_CIPHER_C, POLARSSL_MD_C
1937 * and at least one of the POLARSSL_SSL_PROTO_* defines
1938 *
1939 * This module is required for SSL/TLS.
1940 */
1941 #define POLARSSL_SSL_TLS_C
1942
1943 /**
1944 * \def POLARSSL_THREADING_C
1945 *
1946 * Enable the threading abstraction layer.
1947 * By default PolarSSL assumes it is used in a non-threaded environment or that
1948 * contexts are not shared between threads. If you do intend to use contexts
1949 * between threads, you will need to enable this layer to prevent race
1950 * conditions.
1951 *
1952 * Module: library/threading.c
1953 *
1954 * This allows different threading implementations (self-implemented or
1955 * provided).
1956 *
1957 * You will have to enable either POLARSSL_THREADING_ALT or
1958 * POLARSSL_THREADING_PTHREAD.
1959 *
1960 * Enable this layer to allow use of mutexes within PolarSSL
1961 */
1962 //#define POLARSSL_THREADING_C
1963
1964 /**
1965 * \def POLARSSL_TIMING_C
1966 *
1967 * Enable the portable timing interface.
1968 *
1969 * Module: library/timing.c
1970 * Caller: library/havege.c
1971 *
1972 * This module is used by the HAVEGE random number generator.
1973 */
1974 #define POLARSSL_TIMING_C
1975
1976 /**
1977 * \def POLARSSL_VERSION_C
1978 *
1979 * Enable run-time version information.
1980 *
1981 * Module: library/version.c
1982 *
1983 * This module provides run-time version information.
1984 */
1985 #define POLARSSL_VERSION_C
1986
1987 /**
1988 * \def POLARSSL_X509_USE_C
1989 *
1990 * Enable X.509 core for using certificates.
1991 *
1992 * Module: library/x509.c
1993 * Caller: library/x509_crl.c
1994 * library/x509_crt.c
1995 * library/x509_csr.c
1996 *
1997 * Requires: POLARSSL_ASN1_PARSE_C, POLARSSL_BIGNUM_C, POLARSSL_OID_C,
1998 * POLARSSL_PK_PARSE_C
1999 *
2000 * This module is required for the X.509 parsing modules.
2001 */
2002 #define POLARSSL_X509_USE_C
2003
2004 /**
2005 * \def POLARSSL_X509_CRT_PARSE_C
2006 *
2007 * Enable X.509 certificate parsing.
2008 *
2009 * Module: library/x509_crt.c
2010 * Caller: library/ssl_cli.c
2011 * library/ssl_srv.c
2012 * library/ssl_tls.c
2013 *
2014 * Requires: POLARSSL_X509_USE_C
2015 *
2016 * This module is required for X.509 certificate parsing.
2017 */
2018 #define POLARSSL_X509_CRT_PARSE_C
2019
2020 /**
2021 * \def POLARSSL_X509_CRL_PARSE_C
2022 *
2023 * Enable X.509 CRL parsing.
2024 *
2025 * Module: library/x509_crl.c
2026 * Caller: library/x509_crt.c
2027 *
2028 * Requires: POLARSSL_X509_USE_C
2029 *
2030 * This module is required for X.509 CRL parsing.
2031 */
2032 #define POLARSSL_X509_CRL_PARSE_C
2033
2034 /**
2035 * \def POLARSSL_X509_CSR_PARSE_C
2036 *
2037 * Enable X.509 Certificate Signing Request (CSR) parsing.
2038 *
2039 * Module: library/x509_csr.c
2040 * Caller: library/x509_crt_write.c
2041 *
2042 * Requires: POLARSSL_X509_USE_C
2043 *
2044 * This module is used for reading X.509 certificate request.
2045 */
2046 #define POLARSSL_X509_CSR_PARSE_C
2047
2048 /**
2049 * \def POLARSSL_X509_CREATE_C
2050 *
2051 * Enable X.509 core for creating certificates.
2052 *
2053 * Module: library/x509_create.c
2054 *
2055 * Requires: POLARSSL_BIGNUM_C, POLARSSL_OID_C, POLARSSL_PK_WRITE_C
2056 *
2057 * This module is the basis for creating X.509 certificates and CSRs.
2058 */
2059 #define POLARSSL_X509_CREATE_C
2060
2061 /**
2062 * \def POLARSSL_X509_CRT_WRITE_C
2063 *
2064 * Enable creating X.509 certificates.
2065 *
2066 * Module: library/x509_crt_write.c
2067 *
2068 * Requires: POLARSSL_CREATE_C
2069 *
2070 * This module is required for X.509 certificate creation.
2071 */
2072 #define POLARSSL_X509_CRT_WRITE_C
2073
2074 /**
2075 * \def POLARSSL_X509_CSR_WRITE_C
2076 *
2077 * Enable creating X.509 Certificate Signing Requests (CSR).
2078 *
2079 * Module: library/x509_csr_write.c
2080 *
2081 * Requires: POLARSSL_CREATE_C
2082 *
2083 * This module is required for X.509 certificate request writing.
2084 */
2085 #define POLARSSL_X509_CSR_WRITE_C
2086
2087 /**
2088 * \def POLARSSL_XTEA_C
2089 *
2090 * Enable the XTEA block cipher.
2091 *
2092 * Module: library/xtea.c
2093 * Caller:
2094 */
2095 #define POLARSSL_XTEA_C
2096
2097 /* \} name SECTION: PolarSSL modules */
2098
2099 /**
2100 * \name SECTION: Module configuration options
2101 *
2102 * This section allows for the setting of module specific sizes and
2103 * configuration options. The default values are already present in the
2104 * relevant header files and should suffice for the regular use cases.
2105 *
2106 * Our advice is to enable options and change their values here
2107 * only if you have a good reason and know the consequences.
2108 *
2109 * Please check the respective header file for documentation on these
2110 * parameters (to prevent duplicate documentation).
2111 * \{
2112 */
2113
2114 /* MPI / BIGNUM options */
2115 //#define POLARSSL_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
2116 //#define POLARSSL_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
2117
2118 /* CTR_DRBG options */
2119 //#define CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
2120 //#define CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
2121 //#define CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
2122 //#define CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
2123 //#define CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
2124
2125 /* HMAC_DRBG options */
2126 //#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
2127 //#define POLARSSL_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
2128 //#define POLARSSL_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
2129 //#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
2130
2131 /* ECP options */
2132 //#define POLARSSL_ECP_MAX_BITS 521 /**< Maximum bit size of groups */
2133 //#define POLARSSL_ECP_WINDOW_SIZE 6 /**< Maximum window size used */
2134 //#define POLARSSL_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */
2135
2136 /* Entropy options */
2137 //#define ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
2138 //#define ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
2139
2140 /* Memory buffer allocator options */
2141 //#define POLARSSL_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
2142
2143 /* Platform options */
2144 //#define POLARSSL_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if POLARSSL_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
2145 //#define POLARSSL_PLATFORM_STD_MALLOC malloc /**< Default allocator to use, can be undefined */
2146 //#define POLARSSL_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */
2147 //#define POLARSSL_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
2148 //#define POLARSSL_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
2149
2150 /* SSL Cache options */
2151 //#define SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
2152 //#define SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
2153
2154 /* SSL options */
2155 //#define SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */
2156 //#define SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
2157 //#define POLARSSL_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
2158
2159 /**
2160 * Complete list of ciphersuites to use, in order of preference.
2161 *
2162 * \warning No dependency checking is done on that field! This option can only
2163 * be used to restrict the set of available ciphersuites. It is your
2164 * responsibility to make sure the needed modules are active.
2165 *
2166 * Use this to save a few hundred bytes of ROM (default ordering of all
2167 * available ciphersuites) and a few to a few hundred bytes of RAM.
2168 *
2169 * The value below is only an example, not the default.
2170 */
2171 //#define SSL_CIPHERSUITES TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
2172
2173 /* Debug options */
2174 //#define POLARSSL_DEBUG_DFL_MODE POLARSSL_DEBUG_LOG_FULL /**< Default log: Full or Raw */
2175
2176 /* \} name SECTION: Module configuration options */
2177
2178
2179 #endif /* POLARSSL_CONFIG_H */
Impressum, Datenschutz