]> git.zerfleddert.de Git - proxmark3-svn/blob - fpga/testbed_lo_simulate.v
some cards need to have Le=0x00, some need to not have... (#651)
[proxmark3-svn] / fpga / testbed_lo_simulate.v
1 `include "lo_simulate.v"
2
3 /*
4 pck0 - input main 24Mhz clock (PLL / 4)
5 [7:0] adc_d - input data from A/D converter
6
7
8 pwr_lo - output to coil drivers (ssp_clk / 8)
9 adc_clk - output A/D clock signal
10 ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
11 ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
12 ssp_clk - output SSP clock signal
13
14 ck_1356meg - input unused
15 ck_1356megb - input unused
16 ssp_dout - input unused
17 cross_hi - input unused
18 cross_lo - input unused
19
20 pwr_hi - output unused, tied low
21 pwr_oe1 - output unused, undefined
22 pwr_oe2 - output unused, undefined
23 pwr_oe3 - output unused, undefined
24 pwr_oe4 - output unused, undefined
25 dbg - output alias for adc_clk
26 */
27
28 module testbed_lo_simulate;
29 reg pck0;
30 reg [7:0] adc_d;
31
32
33 wire pwr_lo;
34 wire adc_clk;
35 wire ck_1356meg;
36 wire ck_1356megb;
37 wire ssp_frame;
38 wire ssp_din;
39 wire ssp_clk;
40 reg ssp_dout;
41 wire pwr_hi;
42 wire pwr_oe1;
43 wire pwr_oe2;
44 wire pwr_oe3;
45 wire pwr_oe4;
46 reg cross_lo;
47 wire cross_hi;
48 wire dbg;
49
50 lo_simulate #(5,200) dut(
51 .pck0(pck0),
52 .ck_1356meg(ck_1356meg),
53 .ck_1356megb(ck_1356megb),
54 .pwr_lo(pwr_lo),
55 .pwr_hi(pwr_hi),
56 .pwr_oe1(pwr_oe1),
57 .pwr_oe2(pwr_oe2),
58 .pwr_oe3(pwr_oe3),
59 .pwr_oe4(pwr_oe4),
60 .adc_d(adc_d),
61 .adc_clk(adc_clk),
62 .ssp_frame(ssp_frame),
63 .ssp_din(ssp_din),
64 .ssp_dout(ssp_dout),
65 .ssp_clk(ssp_clk),
66 .cross_hi(cross_hi),
67 .cross_lo(cross_lo),
68 .dbg(dbg)
69 );
70
71
72 integer i, counter=0;
73
74 // main clock
75 always #5 pck0 = !pck0;
76
77 //cross_lo is not really synced to pck0 but it's roughly pck0/192 (24Mhz/192=125Khz)
78 task crank_dut;
79 begin
80 @(posedge pck0) ;
81 counter = counter + 1;
82 if (counter == 192) begin
83 counter = 0;
84 ssp_dout = $random;
85 cross_lo = 1;
86 end else begin
87 cross_lo = 0;
88 end
89
90 end
91 endtask
92
93 initial begin
94 pck0 = 0;
95 for (i = 0 ; i < 4096 ; i = i + 1) begin
96 crank_dut;
97 end
98 $finish;
99 end
100
101 endmodule // main
Impressum, Datenschutz