]> git.zerfleddert.de Git - proxmark3-svn/blob - armsrc/legicrf.c
Merge branch 'master' into fix_iclass_sim
[proxmark3-svn] / armsrc / legicrf.c
1 //-----------------------------------------------------------------------------
2 // (c) 2009 Henryk Plötz <henryk@ploetzli.ch>
3 // 2016 Iceman
4 // 2018 AntiCat
5 //
6 // This code is licensed to you under the terms of the GNU GPL, version 2 or,
7 // at your option, any later version. See the LICENSE.txt file for the text of
8 // the license.
9 //-----------------------------------------------------------------------------
10 // LEGIC RF simulation code
11 //-----------------------------------------------------------------------------
12
13 #include "legicrf.h"
14
15 #include "proxmark3.h"
16 #include "apps.h"
17 #include "util.h"
18 #include "string.h"
19 #include "legic_prng.h"
20 #include "legic.h"
21 #include "crc.h"
22 #include "fpgaloader.h"
23
24 static legic_card_select_t card;/* metadata of currently selected card */
25 static crc_t legic_crc;
26
27 //-----------------------------------------------------------------------------
28 // Frame timing and pseudorandom number generator
29 //
30 // The Prng is forwarded every 100us (TAG_BIT_PERIOD), except when the reader is
31 // transmitting. In that case the prng has to be forwarded every bit transmitted:
32 // - 60us for a 0 (RWD_TIME_0)
33 // - 100us for a 1 (RWD_TIME_1)
34 //
35 // The data dependent timing makes writing comprehensible code significantly
36 // harder. The current aproach forwards the prng data based if there is data on
37 // air and time based, using GET_TICKS, during computational and wait periodes.
38 //
39 // To not have the necessity to calculate/guess exection time dependend timeouts
40 // tx_frame and rx_frame use a shared timestamp to coordinate tx and rx timeslots.
41 //-----------------------------------------------------------------------------
42
43 static uint32_t last_frame_end; /* ts of last bit of previews rx or tx frame */
44
45 #define RWD_TIME_PAUSE 30 /* 20us */
46 #define RWD_TIME_1 150 /* READER_TIME_PAUSE 20us off + 80us on = 100us */
47 #define RWD_TIME_0 90 /* READER_TIME_PAUSE 20us off + 40us on = 60us */
48 #define RWD_FRAME_WAIT 330 /* 220us from TAG frame end to READER frame start */
49 #define TAG_FRAME_WAIT 495 /* 330us from READER frame end to TAG frame start */
50 #define TAG_BIT_PERIOD 150 /* 100us */
51 #define TAG_WRITE_TIMEOUT 60 /* 40 * 100us (write should take at most 3.6ms) */
52
53 #define LEGIC_READ 0x01 /* Read Command */
54 #define LEGIC_WRITE 0x00 /* Write Command */
55
56 #define SESSION_IV 0x55 /* An arbitrary chose session IV, all shoud work */
57 #define OFFSET_LOG 1024 /* The largest Legic Prime card is 1k */
58 #define WRITE_LOWERLIMIT 4 /* UID and MCC are not writable */
59
60 #define INPUT_THRESHOLD 8 /* heuristically determined, lower values */
61 /* lead to detecting false ack during write */
62
63 //-----------------------------------------------------------------------------
64 // I/O interface abstraction (FPGA -> ARM)
65 //-----------------------------------------------------------------------------
66
67 static inline uint16_t rx_frame_from_fpga() {
68 for(;;) {
69 WDT_HIT();
70
71 // wait for frame be become available in rx holding register
72 if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
73 return AT91C_BASE_SSC->SSC_RHR;
74 }
75 }
76 }
77
78 //-----------------------------------------------------------------------------
79 // Demodulation (Reader)
80 //-----------------------------------------------------------------------------
81
82 // Returns a demedulated bit
83 //
84 // The FPGA running xcorrelation samples the subcarrier at ~13.56 MHz. The mode
85 // was initialy designed to receive BSPK/2-PSK. Hance, it reports an I/Q pair
86 // every 4.7us (8 bits i and 8 bits q).
87 //
88 // The subcarrier amplitude can be calculated using Pythagoras sqrt(i^2 + q^2).
89 // To reduce CPU time the amplitude is approximated by using linear functions:
90 // am = MAX(ABS(i),ABS(q)) + 1/2*MIN(ABS(i),ABSq))
91 //
92 // The bit time is 99.1us (21 I/Q pairs). The receiver skips the first 5 samples
93 // and averages the next (most stable) 8 samples. The final 8 samples are dropped
94 // also.
95 //
96 // The demodulated should be alligned to the bit period by the caller. This is
97 // done in rx_bit and rx_ack.
98 static inline bool rx_bit() {
99 int32_t sum_cq = 0;
100 int32_t sum_ci = 0;
101
102 // skip first 5 I/Q pairs
103 for(size_t i = 0; i<5; ++i) {
104 (void)rx_frame_from_fpga();
105 }
106
107 // sample next 8 I/Q pairs
108 for(size_t i = 0; i<8; ++i) {
109 uint16_t iq = rx_frame_from_fpga();
110 int8_t ci = (int8_t)(iq >> 8);
111 int8_t cq = (int8_t)(iq & 0xff);
112 sum_ci += ci;
113 sum_cq += cq;
114 }
115
116 // calculate power
117 int32_t power = (MAX(ABS(sum_ci), ABS(sum_cq)) + MIN(ABS(sum_ci), ABS(sum_cq))/2);
118
119 // compare average (power / 8) to threshold
120 return ((power >> 3) > INPUT_THRESHOLD);
121 }
122
123 //-----------------------------------------------------------------------------
124 // Modulation (Reader)
125 //
126 // I've tried to modulate the Legic specific pause-puls using ssc and the default
127 // ssc clock of 105.4 kHz (bit periode of 9.4us) - previous commit. However,
128 // the timing was not precise enough. By increasing the ssc clock this could
129 // be circumvented, but the adventage over bitbang would be little.
130 //-----------------------------------------------------------------------------
131
132 static inline void tx_bit(bool bit) {
133 // insert pause
134 HIGH(GPIO_SSC_DOUT);
135 last_frame_end += RWD_TIME_PAUSE;
136 while(GET_TICKS < last_frame_end) { };
137
138 // return to carrier on, wait for bit periode to end
139 LOW(GPIO_SSC_DOUT);
140 last_frame_end += (bit ? RWD_TIME_1 : RWD_TIME_0) - RWD_TIME_PAUSE;
141 while(GET_TICKS < last_frame_end) { };
142 }
143
144 //-----------------------------------------------------------------------------
145 // Frame Handling (Reader)
146 //
147 // The LEGIC RF protocol from card to reader does not include explicit frame
148 // start/stop information or length information. The reader must know beforehand
149 // how many bits it wants to receive.
150 // Notably: a card sending a stream of 0-bits is indistinguishable from no card
151 // present.
152 //-----------------------------------------------------------------------------
153
154 static void tx_frame(uint32_t frame, uint8_t len) {
155 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_MODE_SEND_FULL_MOD);
156
157 // wait for next tx timeslot
158 last_frame_end += RWD_FRAME_WAIT;
159 while(GET_TICKS < last_frame_end) { };
160
161 // transmit frame, MSB first
162 for(uint8_t i = 0; i < len; ++i) {
163 bool bit = (frame >> i) & 0x01;
164 tx_bit(bit ^ legic_prng_get_bit());
165 legic_prng_forward(1);
166 };
167
168 // add pause to mark end of the frame
169 HIGH(GPIO_SSC_DOUT);
170 last_frame_end += RWD_TIME_PAUSE;
171 while(GET_TICKS < last_frame_end) { };
172 LOW(GPIO_SSC_DOUT);
173 }
174
175 static uint32_t rx_frame(uint8_t len) {
176 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_212_KHZ | FPGA_HF_READER_MODE_RECEIVE_IQ);
177
178 // hold sampling until card is expected to respond
179 last_frame_end += TAG_FRAME_WAIT;
180 while(GET_TICKS < last_frame_end) { };
181
182 uint32_t frame = 0;
183 for(uint8_t i = 0; i < len; ++i) {
184 frame |= (rx_bit() ^ legic_prng_get_bit()) << i;
185 legic_prng_forward(1);
186
187 // rx_bit runs only 95us, resync to TAG_BIT_PERIOD
188 last_frame_end += TAG_BIT_PERIOD;
189 while(GET_TICKS < last_frame_end) { };
190 }
191
192 return frame;
193 }
194
195 static bool rx_ack() {
196 // change fpga into rx mode
197 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_212_KHZ | FPGA_HF_READER_MODE_RECEIVE_IQ);
198
199 // hold sampling until card is expected to respond
200 last_frame_end += TAG_FRAME_WAIT;
201 while(GET_TICKS < last_frame_end) { };
202
203 uint32_t ack = 0;
204 for(uint8_t i = 0; i < TAG_WRITE_TIMEOUT; ++i) {
205 // sample bit
206 ack = rx_bit();
207 legic_prng_forward(1);
208
209 // rx_bit runs only 95us, resync to TAG_BIT_PERIOD
210 last_frame_end += TAG_BIT_PERIOD;
211 while(GET_TICKS < last_frame_end) { };
212
213 // check if it was an ACK
214 if(ack) {
215 break;
216 }
217 }
218
219 return ack;
220 }
221
222 //-----------------------------------------------------------------------------
223 // Legic Reader
224 //-----------------------------------------------------------------------------
225
226 static int init_card(uint8_t cardtype, legic_card_select_t *p_card) {
227 p_card->tagtype = cardtype;
228
229 switch(p_card->tagtype) {
230 case 0x0d:
231 p_card->cmdsize = 6;
232 p_card->addrsize = 5;
233 p_card->cardsize = 22;
234 break;
235 case 0x1d:
236 p_card->cmdsize = 9;
237 p_card->addrsize = 8;
238 p_card->cardsize = 256;
239 break;
240 case 0x3d:
241 p_card->cmdsize = 11;
242 p_card->addrsize = 10;
243 p_card->cardsize = 1024;
244 break;
245 default:
246 p_card->cmdsize = 0;
247 p_card->addrsize = 0;
248 p_card->cardsize = 0;
249 return 2;
250 }
251 return 0;
252 }
253
254 static void init_reader(bool clear_mem) {
255 // configure FPGA
256 FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
257 FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER | FPGA_HF_READER_SUBCARRIER_212_KHZ | FPGA_HF_READER_MODE_RECEIVE_IQ);
258 SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
259 LED_D_ON();
260
261 // configure SSC with defaults
262 FpgaSetupSsc(FPGA_MAJOR_MODE_HF_READER);
263
264 // re-claim GPIO_SSC_DOUT as GPIO and enable output
265 AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
266 AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
267 LOW(GPIO_SSC_DOUT);
268
269 // init crc calculator
270 crc_init(&legic_crc, 4, 0x19 >> 1, 0x05, 0);
271
272 // start us timer
273 StartTicks();
274 }
275
276 // Setup reader to card connection
277 //
278 // The setup consists of a three way handshake:
279 // - Transmit initialisation vector 7 bits
280 // - Receive card type 6 bits
281 // - Transmit Acknowledge 6 bits
282 static uint32_t setup_phase(uint8_t iv) {
283 // init coordination timestamp
284 last_frame_end = GET_TICKS;
285
286 // Switch on carrier and let the card charge for 5ms.
287 last_frame_end += 7500;
288 while(GET_TICKS < last_frame_end) { };
289
290 legic_prng_init(0);
291 tx_frame(iv, 7);
292
293 // configure prng
294 legic_prng_init(iv);
295 legic_prng_forward(2);
296
297 // receive card type
298 int32_t card_type = rx_frame(6);
299 legic_prng_forward(3);
300
301 // send obsfuscated acknowledgment frame
302 switch (card_type) {
303 case 0x0D:
304 tx_frame(0x19, 6); // MIM22 | READCMD = 0x18 | 0x01
305 break;
306 case 0x1D:
307 case 0x3D:
308 tx_frame(0x39, 6); // MIM256 | READCMD = 0x38 | 0x01
309 break;
310 }
311
312 return card_type;
313 }
314
315 static uint8_t calc_crc4(uint16_t cmd, uint8_t cmd_sz, uint8_t value) {
316 crc_clear(&legic_crc);
317 crc_update(&legic_crc, (value << cmd_sz) | cmd, 8 + cmd_sz);
318 return crc_finish(&legic_crc);
319 }
320
321 static int16_t read_byte(uint16_t index, uint8_t cmd_sz) {
322 uint16_t cmd = (index << 1) | LEGIC_READ;
323
324 // read one byte
325 LED_B_ON();
326 legic_prng_forward(2);
327 tx_frame(cmd, cmd_sz);
328 legic_prng_forward(2);
329 uint32_t frame = rx_frame(12);
330 LED_B_OFF();
331
332 // split frame into data and crc
333 uint8_t byte = BYTEx(frame, 0);
334 uint8_t crc = BYTEx(frame, 1);
335
336 // check received against calculated crc
337 uint8_t calc_crc = calc_crc4(cmd, cmd_sz, byte);
338 if(calc_crc != crc) {
339 Dbprintf("!!! crc mismatch: %x != %x !!!", calc_crc, crc);
340 return -1;
341 }
342
343 legic_prng_forward(1);
344
345 return byte;
346 }
347
348 // Transmit write command, wait until (3.6ms) the tag sends back an unencrypted
349 // ACK ('1' bit) and forward the prng time based.
350 bool write_byte(uint16_t index, uint8_t byte, uint8_t addr_sz) {
351 uint32_t cmd = index << 1 | LEGIC_WRITE; // prepare command
352 uint8_t crc = calc_crc4(cmd, addr_sz + 1, byte); // calculate crc
353 cmd |= byte << (addr_sz + 1); // append value
354 cmd |= (crc & 0xF) << (addr_sz + 1 + 8); // and crc
355
356 // send write command
357 LED_C_ON();
358 legic_prng_forward(2);
359 tx_frame(cmd, addr_sz + 1 + 8 + 4); // sz = addr_sz + cmd + data + crc
360 legic_prng_forward(3);
361 LED_C_OFF();
362
363 // wait for ack
364 return rx_ack();
365 }
366
367 //-----------------------------------------------------------------------------
368 // Command Line Interface
369 //
370 // Only this functions are public / called from appmain.c
371 //-----------------------------------------------------------------------------
372 void LegicRfReader(int offset, int bytes) {
373 uint8_t *BigBuf = BigBuf_get_addr();
374 memset(BigBuf, 0, 1024);
375
376 // configure ARM and FPGA
377 init_reader(false);
378
379 // establish shared secret and detect card type
380 DbpString("Reading card ...");
381 uint8_t card_type = setup_phase(SESSION_IV);
382 uint8_t result = 0;
383 if(init_card(card_type, &card) != 0) {
384 result = 1;
385 goto OUT;
386 }
387
388 // if no argument is specified create full dump
389 if(bytes == -1) {
390 bytes = card.cardsize;
391 }
392
393 // do not read beyond card memory
394 if(bytes + offset > card.cardsize) {
395 bytes = card.cardsize - offset;
396 }
397
398 for(uint16_t i = 0; i < bytes; ++i) {
399 int16_t byte = read_byte(offset + i, card.cmdsize);
400 if(byte == -1) {
401 result = 2;
402 goto OUT;
403 }
404 BigBuf[i] = byte;
405 }
406
407 OUT:
408 cmd_send(CMD_ACK, result, bytes, 0, &card, sizeof(card));
409 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
410 LED_B_OFF();
411 LED_C_OFF();
412 LED_D_OFF();
413 StopTicks();
414 }
415
416 void LegicRfWriter(int bytes, int offset) {
417 uint8_t *BigBuf = BigBuf_get_addr();
418
419 // configure ARM and FPGA
420 init_reader(false);
421
422 // uid is not writeable
423 if(offset <= WRITE_LOWERLIMIT) {
424 goto OUT;
425 }
426
427 // establish shared secret and detect card type
428 Dbprintf("Writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes);
429 uint8_t card_type = setup_phase(SESSION_IV);
430 if(init_card(card_type, &card) != 0) {
431 Dbprintf("No or unknown card found, aborting");
432 goto OUT;
433 }
434
435 // do not write beyond card memory
436 if(bytes + offset > card.cardsize) {
437 bytes = card.cardsize - offset;
438 }
439
440 // write in reverse order, only then is DCF (decremental field) writable
441 while(bytes-- > 0 && !BUTTON_PRESS()) {
442 if(!write_byte(bytes + offset, BigBuf[bytes + offset], card.addrsize)) {
443 Dbprintf("operation failed @ 0x%03.3x", bytes);
444 goto OUT;
445 }
446 }
447
448 // OK
449 DbpString("Write successful");
450
451 OUT:
452 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
453 LED_B_OFF();
454 LED_C_OFF();
455 LED_D_OFF();
456 StopTicks();
457 }
Impressum, Datenschutz