]> git.zerfleddert.de Git - proxmark3-svn/blob - README.txt
minor code cleanup
[proxmark3-svn] / README.txt
1 NOTICE:
2 (2014-03-26)
3 This is now the official Proxmark repository!
4
5 INTRODUCTION:
6
7 The proxmark3 is a powerful general purpose RFID tool, the size of a deck
8 of cards, designed to snoop, listen and emulate everything from
9 Low Frequency (125kHz) to High Frequency (13.56MHz) tags.
10
11 This repository contains enough software, logic (for the FPGA), and design
12 documentation for the hardware that you could, at least in theory,
13 do something useful with a proxmark3.
14
15 RESOURCES:
16
17 * This repository!
18 https://github.com/Proxmark/proxmark3
19
20 * The Wiki
21 https://github.com/Proxmark/proxmark3/wiki
22
23 * The GitHub page
24 http://proxmark.github.io/proxmark3/
25
26 * The Forum
27 http://www.proxmark.org/forum
28
29 * The IRC chanel
30 irc.freenode.org #proxmark3
31 -or-
32 http://webchat.freenode.net/?channels=#proxmark3
33
34 DEVELOPMENT:
35
36 The tools required to build or run the project will vary depending on
37 your operating system. Please refer to the Wiki for details.
38
39 * https://github.com/Proxmark/proxmark3/wiki
40
41 OBTAINING HARDWARE:
42
43 The Proxmark 3 is available for purcahse (assembled and tested) from the
44 following locations:
45
46 * http://proxmark3.com/
47 * http://www.xfpga.com/
48
49 Most of the ultra-low-volume contract assemblers could put
50 something like this together with a reasonable yield. A run of around
51 a dozen units is probably cost-effective. The BOM includes (possibly-
52 outdated) component pricing, and everything is available from Digikey
53 and the usual distributors.
54
55 If you've never assembled a modern circuit board by hand, then this is
56 not a good place to start. Some of the components (e.g. the crystals)
57 must not be assembled with a soldering iron, and require hot air.
58
59 The schematics are included; the component values given are not
60 necessarily correct for all situations, but it should be possible to do
61 nearly anything you would want with appropriate population options.
62
63 The printed circuit board artwork is also available, as Gerbers and an
64 Excellon drill file.
65
66
67 LICENSING:
68
69 This program is free software; you can redistribute it and/or modify
70 it under the terms of the GNU General Public License as published by
71 the Free Software Foundation; either version 2 of the License, or
72 (at your option) any later version.
73
74 This program is distributed in the hope that it will be useful,
75 but WITHOUT ANY WARRANTY; without even the implied warranty of
76 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
77 GNU General Public License for more details.
78
79 You should have received a copy of the GNU General Public License
80 along with this program; if not, write to the Free Software
81 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
82
83
84 Jonathan Westhues
85 user jwesthues, at host cq.cx
86
87 May 2007, Cambridge MA
Impressum, Datenschutz