]> git.zerfleddert.de Git - proxmark3-svn/blobdiff - client/cmdlft55xx.c
Client code cleanup:
[proxmark3-svn] / client / cmdlft55xx.c
index 348cb229d062501ef269c9946faea68095bdfa7a..27c84efa536efc80dbcd95c35ac03f0e57ef266e 100644 (file)
@@ -10,7 +10,6 @@
 #include <stdio.h>\r
 #include <string.h>\r
 #include <inttypes.h>\r
-//#include <time.h>  //not used - marshmellow\r
 #include "proxmark3.h"\r
 #include "ui.h"\r
 #include "graph.h"\r
@@ -22,8 +21,6 @@
 #include "util.h"\r
 #include "data.h"\r
 #include "lfdemod.h"\r
-//#include "../common/crc.h"  //not used - marshmellow\r
-//#include "../common/iso14443crc.h" //not used - marshmellow\r
 #include "cmdhf14a.h" //for getTagInfo\r
 \r
 #define T55x7_CONFIGURATION_BLOCK 0x00\r
@@ -33,7 +30,7 @@
 #define REGULAR_READ_MODE_BLOCK 0xFF\r
 \r
 // Default configuration\r
-t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00, .Q5 = FALSE };\r
+t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = false, .offset = 0x00, .block0 = 0x00, .Q5 = false };\r
 \r
 t55xx_conf_block_t Get_t55xx_Config(){\r
        return config;\r
@@ -51,6 +48,7 @@ int usage_t55xx_config(){
        PrintAndLog("       i [1]                         Invert data signal, defaults to normal");\r
        PrintAndLog("       o [offset]                    Set offset, where data should start decode in bitstream");\r
        PrintAndLog("       Q5                            Set as Q5(T5555) chip instead of T55x7");\r
+       PrintAndLog("       ST                            Set Sequence Terminator on");\r
        PrintAndLog("");\r
        PrintAndLog("Examples:");\r
        PrintAndLog("      lf t55xx config d FSK          - FSK demodulation");\r
@@ -78,7 +76,7 @@ int usage_t55xx_read(){
        return 0;\r
 }\r
 int usage_t55xx_write(){\r
-       PrintAndLog("Usage:  lf t55xx wr [b <block>] [d <data>] [p <password>] [1]");\r
+       PrintAndLog("Usage:  lf t55xx write [b <block>] [d <data>] [p <password>] [1]");\r
        PrintAndLog("Options:");\r
        PrintAndLog("     b <block>    - block number to write. Between 0-7");\r
        PrintAndLog("     d <data>     - 4 bytes of data to write (8 hex characters)");\r
@@ -86,8 +84,8 @@ int usage_t55xx_write(){
        PrintAndLog("     1            - OPTIONAL write Page 1 instead of Page 0");\r
        PrintAndLog("");\r
        PrintAndLog("Examples:");\r
-       PrintAndLog("      lf t55xx wr b 3 d 11223344            - write 11223344 to block 3");\r
-       PrintAndLog("      lf t55xx wr b 3 d 11223344 p feedbeef - write 11223344 to block 3 password feedbeef");\r
+       PrintAndLog("      lf t55xx write b 3 d 11223344            - write 11223344 to block 3");\r
+       PrintAndLog("      lf t55xx write b 3 d 11223344 p feedbeef - write 11223344 to block 3 password feedbeef");\r
        PrintAndLog("");\r
        return 0;\r
 }\r
@@ -196,7 +194,7 @@ int CmdT55xxSetConfig(const char *Cmd) {
        uint8_t bitRate = 0;\r
        uint8_t rates[9] = {8,16,32,40,50,64,100,128,0};\r
        uint8_t cmdp = 0;\r
-       bool errors = FALSE;\r
+       bool errors = false;\r
        while(param_getchar(Cmd, cmdp) != 0x00 && !errors)\r
        {\r
                tmp = param_getchar(Cmd, cmdp);\r
@@ -215,7 +213,7 @@ int CmdT55xxSetConfig(const char *Cmd) {
                                                break;\r
                                        }\r
                                }\r
-                               if (i==9) errors = TRUE;\r
+                               if (i==9) errors = true;\r
                        }\r
                        cmdp+=2;\r
                        break;\r
@@ -255,7 +253,7 @@ int CmdT55xxSetConfig(const char *Cmd) {
                                config.inverted=0;\r
                        } else {\r
                                PrintAndLog("Unknown modulation '%s'", modulation);\r
-                               errors = TRUE;\r
+                               errors = true;\r
                        }\r
                        break;\r
                case 'i':\r
@@ -270,12 +268,17 @@ int CmdT55xxSetConfig(const char *Cmd) {
                        break;\r
                case 'Q':\r
                case 'q':               \r
-                       config.Q5 = TRUE;\r
+                       config.Q5 = true;\r
+                       cmdp++;\r
+                       break;\r
+               case 'S':\r
+               case 's':               \r
+                       config.ST = true;\r
                        cmdp++;\r
                        break;\r
                default:\r
                        PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));\r
-                       errors = TRUE;\r
+                       errors = true;\r
                        break;\r
                }\r
        }\r
@@ -373,34 +376,35 @@ bool DecodeT55xxBlock(){
        char buf[30] = {0x00};\r
        char *cmdStr = buf;\r
        int ans = 0;\r
+       bool ST = config.ST;\r
        uint8_t bitRate[8] = {8,16,32,40,50,64,100,128};\r
        DemodBufferLen = 0x00;\r
 \r
        switch( config.modulation ){\r
                case DEMOD_FSK:\r
                        snprintf(cmdStr, sizeof(buf),"%d %d", bitRate[config.bitrate], config.inverted );\r
-                       ans = FSKrawDemod(cmdStr, FALSE);\r
+                       ans = FSKrawDemod(cmdStr, false);\r
                        break;\r
                case DEMOD_FSK1:\r
                case DEMOD_FSK1a:\r
                        snprintf(cmdStr, sizeof(buf),"%d %d 8 5", bitRate[config.bitrate], config.inverted );\r
-                       ans = FSKrawDemod(cmdStr, FALSE);\r
+                       ans = FSKrawDemod(cmdStr, false);\r
                        break;\r
                case DEMOD_FSK2:\r
                case DEMOD_FSK2a:\r
                        snprintf(cmdStr, sizeof(buf),"%d %d 10 8", bitRate[config.bitrate], config.inverted );\r
-                       ans = FSKrawDemod(cmdStr, FALSE);\r
+                       ans = FSKrawDemod(cmdStr, false);\r
                        break;\r
                case DEMOD_ASK:\r
                        snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );\r
-                       ans = ASKDemod(cmdStr, FALSE, FALSE, 1);\r
+                       ans = ASKDemod_ext(cmdStr, false, false, 1, &ST);\r
                        break;\r
                case DEMOD_PSK1:\r
                        // skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
                        save_restoreGB(1);\r
                        CmdLtrim("160");\r
                        snprintf(cmdStr, sizeof(buf),"%d %d 6", bitRate[config.bitrate], config.inverted );\r
-                       ans = PSKDemod(cmdStr, FALSE);\r
+                       ans = PSKDemod(cmdStr, false);\r
                        //undo trim samples\r
                        save_restoreGB(0);\r
                        break;\r
@@ -410,22 +414,22 @@ bool DecodeT55xxBlock(){
                        save_restoreGB(1);\r
                        CmdLtrim("160");\r
                        snprintf(cmdStr, sizeof(buf),"%d 0 6", bitRate[config.bitrate] );\r
-                       ans = PSKDemod(cmdStr, FALSE);\r
+                       ans = PSKDemod(cmdStr, false);\r
                        psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
                        //undo trim samples\r
                        save_restoreGB(0);\r
                        break;\r
                case DEMOD_NRZ:\r
                        snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );\r
-                       ans = NRZrawDemod(cmdStr, FALSE);\r
+                       ans = NRZrawDemod(cmdStr, false);\r
                        break;\r
                case DEMOD_BI:\r
                case DEMOD_BIa:\r
                        snprintf(cmdStr, sizeof(buf),"0 %d %d 1", bitRate[config.bitrate], config.inverted );\r
-                       ans = ASKbiphaseDemod(cmdStr, FALSE);\r
+                       ans = ASKbiphaseDemod(cmdStr, false);\r
                        break;\r
                default:\r
-                       return FALSE;\r
+                       return false;\r
        }\r
        return (bool) ans;\r
 }\r
@@ -434,13 +438,13 @@ bool DecodeT5555TraceBlock() {
        DemodBufferLen = 0x00;\r
        \r
        // According to datasheet. Always: RF/64, not inverted, Manchester\r
-       return (bool) ASKDemod("64 0 1", FALSE, FALSE, 1);\r
+       return (bool) ASKDemod("64 0 1", false, false, 1);\r
 }\r
 \r
 int CmdT55xxDetect(const char *Cmd){\r
-       bool errors = FALSE;\r
-       bool useGB = FALSE;\r
-       bool usepwd = FALSE;\r
+       bool errors = false;\r
+       bool useGB = false;\r
+       bool usepwd = false;\r
        uint32_t password = 0;\r
        uint8_t cmdp = 0;\r
 \r
@@ -452,12 +456,12 @@ int CmdT55xxDetect(const char *Cmd){
                case 'p':\r
                case 'P':\r
                        password = param_get32ex(Cmd, cmdp+1, 0, 16);\r
-                       usepwd = TRUE;\r
+                       usepwd = true;\r
                        cmdp += 2;\r
                        break;\r
                case '1':\r
                        // use Graphbuffer data\r
-                       useGB = TRUE;\r
+                       useGB = true;\r
                        cmdp++;\r
                        break;\r
                default:\r
@@ -485,80 +489,87 @@ bool tryDetectModulation(){
        t55xx_conf_block_t tests[15];\r
        int bitRate=0;\r
        uint8_t fc1 = 0, fc2 = 0, clk=0;\r
-\r
-       if (GetFskClock("", FALSE, FALSE)){ \r
-               fskClocks(&fc1, &fc2, &clk, FALSE);\r
-               if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+       if (GetFskClock("", false, false)){ \r
+               fskClocks(&fc1, &fc2, &clk, false);\r
+               if ( FSKrawDemod("0 0", false) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                        tests[hits].modulation = DEMOD_FSK;\r
                        if (fc1==8 && fc2 == 5)\r
                                tests[hits].modulation = DEMOD_FSK1a;\r
                        else if (fc1==10 && fc2 == 8)\r
                                tests[hits].modulation = DEMOD_FSK2;\r
                        tests[hits].bitrate = bitRate;\r
-                       tests[hits].inverted = FALSE;\r
+                       tests[hits].inverted = false;\r
                        tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                       tests[hits].ST = false;\r
                        ++hits;\r
                }\r
-               if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+               if ( FSKrawDemod("0 1", false) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                        tests[hits].modulation = DEMOD_FSK;\r
                        if (fc1 == 8 && fc2 == 5)\r
                                tests[hits].modulation = DEMOD_FSK1;\r
                        else if (fc1 == 10 && fc2 == 8)\r
                                tests[hits].modulation = DEMOD_FSK2a;\r
                        tests[hits].bitrate = bitRate;\r
-                       tests[hits].inverted = TRUE;\r
+                       tests[hits].inverted = true;\r
                        tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                       tests[hits].ST = false;\r
                        ++hits;\r
                }\r
        } else {\r
-               clk = GetAskClock("", FALSE, FALSE);\r
+               clk = GetAskClock("", false, false);\r
                if (clk>0) {\r
-                       if ( ASKDemod("0 0 1", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+                       tests[hits].ST = true;\r
+                       if ( ASKDemod_ext("0 0 1", false, false, 1, &tests[hits].ST) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                                tests[hits].modulation = DEMOD_ASK;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = FALSE;\r
+                               tests[hits].inverted = false;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
                                ++hits;\r
                        }\r
-                       if ( ASKDemod("0 1 1", FALSE, FALSE, 1)  && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+                       tests[hits].ST = true;\r
+                       if ( ASKDemod_ext("0 1 1", false, false, 1, &tests[hits].ST)  && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                                tests[hits].modulation = DEMOD_ASK;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = TRUE;\r
+                               tests[hits].inverted = true;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
                                ++hits;\r
                        }\r
-                       if ( ASKbiphaseDemod("0 0 0 2", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {\r
+                       if ( ASKbiphaseDemod("0 0 0 2", false) && test(DEMOD_BI, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {\r
                                tests[hits].modulation = DEMOD_BI;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = FALSE;\r
+                               tests[hits].inverted = false;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                               tests[hits].ST = false;\r
                                ++hits;\r
                        }\r
-                       if ( ASKbiphaseDemod("0 0 1 2", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {\r
+                       if ( ASKbiphaseDemod("0 0 1 2", false) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {\r
                                tests[hits].modulation = DEMOD_BIa;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = TRUE;\r
+                               tests[hits].inverted = true;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                               tests[hits].ST = false;\r
                                ++hits;\r
                        }\r
                }\r
                //undo trim from ask\r
                //save_restoreGB(0);\r
-               clk = GetNrzClock("", FALSE, FALSE);\r
+               clk = GetNrzClock("", false, false);\r
                if (clk>0) {\r
-                       if ( NRZrawDemod("0 0 1", FALSE)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+                       if ( NRZrawDemod("0 0 1", false)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                                tests[hits].modulation = DEMOD_NRZ;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = FALSE;\r
+                               tests[hits].inverted = false;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                               tests[hits].ST = false;\r
                                ++hits;\r
                        }\r
 \r
-                       if ( NRZrawDemod("0 1 1", FALSE)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+                       if ( NRZrawDemod("0 1 1", false)  && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                                tests[hits].modulation = DEMOD_NRZ;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = TRUE;\r
+                               tests[hits].inverted = true;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                               tests[hits].ST = false;\r
                                ++hits;\r
                        }\r
                }\r
@@ -567,41 +578,45 @@ bool tryDetectModulation(){
                // skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)\r
                save_restoreGB(1);\r
                CmdLtrim("160");\r
-               clk = GetPskClock("", FALSE, FALSE);\r
+               clk = GetPskClock("", false, false);\r
                if (clk>0) {\r
-                       if ( PSKDemod("0 0 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+                       if ( PSKDemod("0 0 6", false) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                                tests[hits].modulation = DEMOD_PSK1;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = FALSE;\r
+                               tests[hits].inverted = false;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                               tests[hits].ST = false;\r
                                ++hits;\r
                        }\r
-                       if ( PSKDemod("0 1 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
+                       if ( PSKDemod("0 1 6", false) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {\r
                                tests[hits].modulation = DEMOD_PSK1;\r
                                tests[hits].bitrate = bitRate;\r
-                               tests[hits].inverted = TRUE;\r
+                               tests[hits].inverted = true;\r
                                tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                               tests[hits].ST = false;\r
                                ++hits;\r
                        }\r
                        // PSK2 - needs a call to psk1TOpsk2.\r
-                       if ( PSKDemod("0 0 6", FALSE)) {\r
+                       if ( PSKDemod("0 0 6", false)) {\r
                                psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
                                if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){\r
                                        tests[hits].modulation = DEMOD_PSK2;\r
                                        tests[hits].bitrate = bitRate;\r
-                                       tests[hits].inverted = FALSE;\r
+                                       tests[hits].inverted = false;\r
                                        tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                                       tests[hits].ST = false;\r
                                        ++hits;\r
                                }\r
                        } // inverse waves does not affect this demod\r
                        // PSK3 - needs a call to psk1TOpsk2.\r
-                       if ( PSKDemod("0 0 6", FALSE)) {\r
+                       if ( PSKDemod("0 0 6", false)) {\r
                                psk1TOpsk2(DemodBuffer, DemodBufferLen);\r
                                if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){\r
                                        tests[hits].modulation = DEMOD_PSK3;\r
                                        tests[hits].bitrate = bitRate;\r
-                                       tests[hits].inverted = FALSE;\r
+                                       tests[hits].inverted = false;\r
                                        tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);\r
+                                       tests[hits].ST = false;\r
                                        ++hits;\r
                                }\r
                        } // inverse waves does not affect this demod\r
@@ -616,8 +631,9 @@ bool tryDetectModulation(){
                config.offset = tests[0].offset;\r
                config.block0 = tests[0].block0;\r
                config.Q5 = tests[0].Q5;\r
+               config.ST = tests[0].ST;\r
                printConfiguration( config );\r
-               return TRUE;\r
+               return true;\r
        }\r
        \r
        if ( hits > 1) {\r
@@ -627,68 +643,68 @@ bool tryDetectModulation(){
                        printConfiguration( tests[i] );\r
                }\r
        }\r
-       return FALSE;\r
+       return false;\r
 }\r
 \r
 bool testModulation(uint8_t mode, uint8_t modread){\r
        switch( mode ){\r
                case DEMOD_FSK:\r
-                       if (modread >= DEMOD_FSK1 && modread <= DEMOD_FSK2a) return TRUE;\r
+                       if (modread >= DEMOD_FSK1 && modread <= DEMOD_FSK2a) return true;\r
                        break;\r
                case DEMOD_ASK:\r
-                       if (modread == DEMOD_ASK) return TRUE;\r
+                       if (modread == DEMOD_ASK) return true;\r
                        break;\r
                case DEMOD_PSK1:\r
-                       if (modread == DEMOD_PSK1) return TRUE;\r
+                       if (modread == DEMOD_PSK1) return true;\r
                        break;\r
                case DEMOD_PSK2:\r
-                       if (modread == DEMOD_PSK2) return TRUE;\r
+                       if (modread == DEMOD_PSK2) return true;\r
                        break;\r
                case DEMOD_PSK3:\r
-                       if (modread == DEMOD_PSK3) return TRUE;\r
+                       if (modread == DEMOD_PSK3) return true;\r
                        break;\r
                case DEMOD_NRZ:\r
-                       if (modread == DEMOD_NRZ) return TRUE;\r
+                       if (modread == DEMOD_NRZ) return true;\r
                        break;\r
                case DEMOD_BI:\r
-                       if (modread == DEMOD_BI) return TRUE;\r
+                       if (modread == DEMOD_BI) return true;\r
                        break;\r
                case DEMOD_BIa:\r
-                       if (modread == DEMOD_BIa) return TRUE;\r
+                       if (modread == DEMOD_BIa) return true;\r
                        break;          \r
                default:\r
-                       return FALSE;\r
+                       return false;\r
        }\r
-       return FALSE;\r
+       return false;\r
 }\r
 \r
 bool testQ5Modulation(uint8_t  mode, uint8_t   modread){\r
        switch( mode ){\r
                case DEMOD_FSK:\r
-                       if (modread >= 4 && modread <= 5) return TRUE;\r
+                       if (modread >= 4 && modread <= 5) return true;\r
                        break;\r
                case DEMOD_ASK:\r
-                       if (modread == 0) return TRUE;\r
+                       if (modread == 0) return true;\r
                        break;\r
                case DEMOD_PSK1:\r
-                       if (modread == 1) return TRUE;\r
+                       if (modread == 1) return true;\r
                        break;\r
                case DEMOD_PSK2:\r
-                       if (modread == 2) return TRUE;\r
+                       if (modread == 2) return true;\r
                        break;\r
                case DEMOD_PSK3:\r
-                       if (modread == 3) return TRUE;\r
+                       if (modread == 3) return true;\r
                        break;\r
                case DEMOD_NRZ:\r
-                       if (modread == 7) return TRUE;\r
+                       if (modread == 7) return true;\r
                        break;\r
                case DEMOD_BI:\r
-                       if (modread == 6) return TRUE;\r
+                       if (modread == 6) return true;\r
                        break;\r
                default:\r
-                       return FALSE;\r
+                       return false;\r
        }\r
-       return FALSE;\r
+       return false;\r
 }\r
 \r
 int convertQ5bitRate(uint8_t bitRateRead) {\r
@@ -702,7 +718,7 @@ int convertQ5bitRate(uint8_t bitRateRead) {
 \r
 bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t    clk){\r
 \r
-       if ( DemodBufferLen < 64 ) return FALSE;\r
+       if ( DemodBufferLen < 64 ) return false;\r
        uint8_t si = 0;\r
        for (uint8_t idx = 28; idx < 64; idx++){\r
                si = idx;\r
@@ -735,9 +751,9 @@ bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk){
                if (*fndBitRate < 0) continue;\r
                *offset = idx;\r
 \r
-               return TRUE;\r
+               return true;\r
        }\r
-       return FALSE;\r
+       return false;\r
 }\r
 \r
 bool testBitRate(uint8_t readRate, uint8_t clk){\r
@@ -750,7 +766,7 @@ bool testBitRate(uint8_t readRate, uint8_t clk){
 \r
 bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5){\r
 \r
-       if ( DemodBufferLen < 64 ) return FALSE;\r
+       if ( DemodBufferLen < 64 ) return false;\r
        uint8_t si = 0;\r
        for (uint8_t idx = 28; idx < 64; idx++){\r
                si = idx;\r
@@ -768,28 +784,28 @@ bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5)
                uint8_t extend   = PackBits(si, 1, DemodBuffer); si += 1;     //bit 15 extended mode\r
                uint8_t modread  = PackBits(si, 5, DemodBuffer); si += 5+2+1; \r
                //uint8_t pskcr   = PackBits(si, 2, DemodBuffer); si += 2+1;  //could check psk cr\r
-               uint8_t nml01    = PackBits(si, 1, DemodBuffer); si += 1+5;   //bit 24, 30, 31 could be tested for 0 if not extended mode\r
-               uint8_t nml02    = PackBits(si, 2, DemodBuffer); si += 2;\r
+               //uint8_t nml01    = PackBits(si, 1, DemodBuffer); si += 1+5;   //bit 24, 30, 31 could be tested for 0 if not extended mode\r
+               //uint8_t nml02    = PackBits(si, 2, DemodBuffer); si += 2;\r
                \r
                //if extended mode\r
-               bool extMode =( (safer == 0x6 || safer == 0x9) && extend) ? TRUE : FALSE;\r
+               bool extMode =( (safer == 0x6 || safer == 0x9) && extend) ? true : false;\r
 \r
                if (!extMode){\r
-                       if (nml01 || nml02 || xtRate) continue;\r
+                       if (xtRate) continue;  //nml01 || nml02 ||  caused issues on noralys tags\r
                }\r
                //test modulation\r
                if (!testModulation(mode, modread)) continue;\r
                if (!testBitRate(bitRate, clk)) continue;\r
                *fndBitRate = bitRate;\r
                *offset = idx;\r
-               *Q5 = FALSE;\r
-               return TRUE;\r
+               *Q5 = false;\r
+               return true;\r
        }\r
        if (testQ5(mode, offset, fndBitRate, clk)) {\r
-               *Q5 = TRUE;\r
-               return TRUE;\r
+               *Q5 = true;\r
+               return true;\r
        }\r
-       return FALSE;\r
+       return false;\r
 }\r
 \r
 void printT55xxBlock(const char *blockNum){\r
@@ -839,6 +855,7 @@ int printConfiguration( t55xx_conf_block_t b){
        PrintAndLog("Bit Rate   : %s", GetBitRateStr(b.bitrate) );\r
        PrintAndLog("Inverted   : %s", (b.inverted) ? "Yes" : "No" );\r
        PrintAndLog("Offset     : %d", b.offset);\r
+       PrintAndLog("Seq. Term. : %s", (b.ST) ? "Yes" : "No" );\r
        PrintAndLog("Block0     : 0x%08X", b.block0);\r
        PrintAndLog("");\r
        return 0;\r
@@ -1371,11 +1388,9 @@ int CmdT55xxBruteForce(const char *Cmd) {
        char buf[9];\r
        char filename[FILE_PATH_SIZE]={0};\r
        int keycnt = 0;\r
+       int ch;\r
        uint8_t stKeyBlock = 20;\r
-       uint8_t *keyBlock = NULL, *p;\r
-       keyBlock = calloc(stKeyBlock, 6);\r
-       if (keyBlock == NULL) return 1;\r
-\r
+       uint8_t *keyBlock = NULL, *p = NULL;\r
        uint32_t start_password = 0x00000000; //start password\r
        uint32_t end_password   = 0xFFFFFFFF; //end   password\r
        bool found = false;\r
@@ -1383,6 +1398,9 @@ int CmdT55xxBruteForce(const char *Cmd) {
        char cmdp = param_getchar(Cmd, 0);\r
        if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_bruteforce();\r
 \r
+       keyBlock = calloc(stKeyBlock, 6);\r
+       if (keyBlock == NULL) return 1;\r
+\r
        if (cmdp == 'i' || cmdp == 'I') {\r
 \r
                int len = strlen(Cmd+2);\r
@@ -1417,6 +1435,7 @@ int CmdT55xxBruteForce(const char *Cmd) {
                                if (!p) {\r
                                        PrintAndLog("Cannot allocate memory for defaultKeys");\r
                                        free(keyBlock);\r
+                                       fclose(f);\r
                                        return 2;\r
                                }\r
                                keyBlock = p;\r
@@ -1431,6 +1450,7 @@ int CmdT55xxBruteForce(const char *Cmd) {
                \r
                if (keycnt == 0) {\r
                        PrintAndLog("No keys found in file");\r
+                       free(keyBlock);\r
                        return 1;\r
                }\r
                PrintAndLog("Loaded %d keys", keycnt);\r
@@ -1440,8 +1460,10 @@ int CmdT55xxBruteForce(const char *Cmd) {
                for (uint16_t c = 0; c < keycnt; ++c ) {\r
 \r
                        if (ukbhit()) {\r
-                               getchar();\r
+                               ch = getchar();\r
+                               (void)ch;\r
                                printf("\naborted via keyboard!\n");\r
+                               free(keyBlock);\r
                                return 0;\r
                        }\r
 \r
@@ -1449,8 +1471,9 @@ int CmdT55xxBruteForce(const char *Cmd) {
 \r
                        PrintAndLog("Testing %08X", testpwd);\r
 \r
-                       if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, testpwd)) {\r
+                       if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, testpwd)) {\r
                                PrintAndLog("Aquireing data from device failed. Quitting");\r
+                               free(keyBlock);\r
                                return 0;\r
                        }\r
 \r
@@ -1458,10 +1481,12 @@ int CmdT55xxBruteForce(const char *Cmd) {
 \r
                        if ( found ) {\r
                                PrintAndLog("Found valid password: [%08X]", testpwd);\r
+                               free(keyBlock);\r
                                return 0;\r
                        }\r
                }\r
                PrintAndLog("Password NOT found.");\r
+               free(keyBlock);\r
                return 0;\r
        }\r
 \r
@@ -1471,8 +1496,10 @@ int CmdT55xxBruteForce(const char *Cmd) {
        start_password = param_get32ex(Cmd, 0, 0, 16);\r
        end_password = param_get32ex(Cmd, 1, 0, 16);\r
 \r
-       if ( start_password >= end_password ) return usage_t55xx_bruteforce();\r
-\r
+       if ( start_password >= end_password ) {\r
+               free(keyBlock);\r
+               return usage_t55xx_bruteforce();\r
+       }\r
        PrintAndLog("Search password range [%08X -> %08X]", start_password, end_password);\r
 \r
        uint32_t i = start_password;\r
@@ -1482,13 +1509,16 @@ int CmdT55xxBruteForce(const char *Cmd) {
                printf(".");\r
                fflush(stdout);\r
                if (ukbhit()) {\r
-                       getchar();\r
+                       ch = getchar();\r
+                       (void)ch;\r
                        printf("\naborted via keyboard!\n");\r
+                       free(keyBlock);\r
                        return 0;\r
                }\r
 \r
-               if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, TRUE, i)) {\r
+               if (!AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, true, i)) {\r
                        PrintAndLog("Aquireing data from device failed. Quitting");\r
+                       free(keyBlock);\r
                        return 0;\r
                }\r
                found = tryDetectModulation();\r
@@ -1503,6 +1533,8 @@ int CmdT55xxBruteForce(const char *Cmd) {
                PrintAndLog("Found valid password: [%08x]", i);\r
        else\r
                PrintAndLog("Password NOT found. Last tried: [%08x]", --i);\r
+\r
+       free(keyBlock);\r
        return 0;\r
 }\r
 \r
Impressum, Datenschutz