#include "string.h"
#include "common.h"
#include "cmd.h"
+#include "iso14443a.h"
// Needed for CRC in emulation mode;
// same construction as in ISO 14443;
// different initial value (CRC_ICLASS)
#include "iso15693tools.h"
#include "protocols.h"
#include "optimized_cipher.h"
+#include "usb_cdc.h" // for usb_poll_validate_length
static int timeout = 4096;
if(!Uart.bitBuffer) {
Uart.bitBuffer = bit ^ 0xFF0;
- return FALSE;
+ return false;
}
else {
Uart.bitBuffer <<= 4;
Uart.output[Uart.byteCnt] = Uart.bitBuffer & 0xFF;
Uart.byteCnt++;
Uart.swapper = 0;
- if(Uart.byteCnt > 15) { return TRUE; }
+ if(Uart.byteCnt > 15) { return true; }
}
else {
Uart.swapper = 1;
Uart.highCnt = 0;
if(Uart.byteCnt == 0) {
// Its not straightforward to show single EOFs
- // So just leave it and do not return TRUE
+ // So just leave it and do not return true
Uart.output[0] = 0xf0;
Uart.byteCnt++;
}
else {
- return TRUE;
+ return true;
}
}
else if(Uart.state != STATE_START_OF_COMMUNICATION) {
Uart.byteCnt++;
Uart.output[Uart.byteCnt] = 0xAA;
Uart.byteCnt++;
- return TRUE;
+ return true;
}*/
}
}
}
- return FALSE;
+ return false;
}
//=============================================================================
if(Demod.buff < 3) {
Demod.buff++;
- return FALSE;
+ return false;
}
if(Demod.state==DEMOD_UNSYNCD) {
Demod.len++;
Demod.state = DEMOD_UNSYNCD;
// error = 0x0f;
- return TRUE;
+ return true;
}
else {
Demod.state = DEMOD_ERROR_WAIT;
}
Demod.state = DEMOD_UNSYNCD;
- return TRUE;
+ return true;
}
else {
Demod.output[Demod.len] = 0xad;
Demod.len++;
Demod.output[Demod.len] = 0xBB;
Demod.len++;
- return TRUE;
+ return true;
}
}
} // end (state != UNSYNCED)
- return FALSE;
+ return false;
}
//=============================================================================
// We won't start recording the frames that we acquire until we trigger;
// a good trigger condition to get started is probably when we see a
// response from the tag.
- //int triggered = FALSE; // FALSE to wait first for card
+ //int triggered = false; // false to wait first for card
// The command (reader -> tag) that we're receiving.
// The length of a received command will in most cases be no more than 18 bytes.
// The DMA buffer, used to stream samples from the FPGA
uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE);
- set_tracing(TRUE);
+ set_tracing(true);
clear_trace();
- iso14a_set_trigger(FALSE);
+ iso14a_set_trigger(false);
int lastRxCounter;
uint8_t *upTo;
Demod.state = DEMOD_UNSYNCD;
// Setup for the DMA.
- FpgaSetupSsc();
+ FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A);
upTo = dmaBuf;
lastRxCounter = DMA_BUFFER_SIZE;
FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE);
time_stop = (GetCountSspClk()-time_0) << 4;
LED_C_ON();
- //if(!LogTrace(Uart.output,Uart.byteCnt, rsamples, Uart.parityBits,TRUE)) break;
- //if(!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, TRUE)) break;
+ //if(!LogTrace(Uart.output,Uart.byteCnt, rsamples, Uart.parityBits,true)) break;
+ //if(!LogTrace(NULL, 0, Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER, 0, true)) break;
if(tracing) {
uint8_t parity[MAX_PARITY_SIZE];
GetParity(Uart.output, Uart.byteCnt, parity);
- LogTrace(Uart.output,Uart.byteCnt, time_start, time_stop, parity, TRUE);
+ LogTrace(Uart.output,Uart.byteCnt, time_start, time_stop, parity, true);
}
if(tracing) {
uint8_t parity[MAX_PARITY_SIZE];
GetParity(Demod.output, Demod.len, parity);
- LogTrace(Demod.output, Demod.len, time_start, time_stop, parity, FALSE);
+ LogTrace(Demod.output, Demod.len, time_start, time_stop, parity, false);
}
// And ready to receive another response.
//-----------------------------------------------------------------------------
// Wait for commands from reader
// Stop when button is pressed
-// Or return TRUE when command is captured
+// Or return true when command is captured
//-----------------------------------------------------------------------------
static int GetIClassCommandFromReader(uint8_t *received, int *len, int maxLen)
{
for(;;) {
WDT_HIT();
- if(BUTTON_PRESS()) return FALSE;
+ if(BUTTON_PRESS()) return false;
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x00;
if(OutOfNDecoding(b & 0x0f)) {
*len = Uart.byteCnt;
- return TRUE;
+ return true;
}
}
}
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
// Enable and clear the trace
- set_tracing(TRUE);
+ set_tracing(true);
clear_trace();
//Use the emulator memory for SIM
uint8_t *emulator = BigBuf_get_EM_addr();
int resp_cc_len;
uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE);
- memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
int len;
// Prepare card messages
StartCountSspClk();
// We need to listen to the high-frequency, peak-detected path.
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
- FpgaSetupSsc();
+ FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A);
// To control where we are in the protocol
int cmdsRecvd = 0;
if (tracing) {
uint8_t parity[MAX_PARITY_SIZE];
GetParity(receivedCmd, len, parity);
- LogTrace(receivedCmd,len, (r2t_time-time_0)<< 4, (r2t_time-time_0) << 4, parity, TRUE);
+ LogTrace(receivedCmd,len, (r2t_time-time_0)<< 4, (r2t_time-time_0) << 4, parity, true);
if (trace_data != NULL) {
GetParity(trace_data, trace_data_size, parity);
- LogTrace(trace_data, trace_data_size, (t2r_time-time_0) << 4, (t2r_time-time_0) << 4, parity, FALSE);
+ LogTrace(trace_data, trace_data_size, (t2r_time-time_0) << 4, (t2r_time-time_0) << 4, parity, false);
}
if(!tracing) {
DbpString("Trace full");
}
}
- memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
}
//Dbprintf("%x", cmdsRecvd);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR|FPGA_HF_SIMULATOR_MODULATE_424K_8BIT);
AT91C_BASE_SSC->SSC_THR = 0x00;
- FpgaSetupSsc();
+ FpgaSetupSsc(FPGA_MAJOR_MODE_HF_SIMULATOR);
while(!BUTTON_PRESS()) {
if((AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)){
b = AT91C_BASE_SSC->SSC_RHR; (void) b;
int c;
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
AT91C_BASE_SSC->SSC_THR = 0x00;
- FpgaSetupSsc();
+ FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A);
if (wait)
{
uint8_t sendbyte;
- bool firstpart = TRUE;
+ bool firstpart = true;
c = 0;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
}
WDT_HIT();
}
- if (samples) *samples = (c + *wait) << 3;
+ if (samples && wait) *samples = (c + *wait) << 3;
}
for(j = 0; j < 4; j++) {
for(k = 0; k < 4; k++) {
if(k == (b & 3)) {
- ToSend[++ToSendMax] = 0x0f;
+ ToSend[++ToSendMax] = 0xf0;
}
else {
ToSend[++ToSendMax] = 0x00;
if (tracing) {
uint8_t par[MAX_PARITY_SIZE];
GetParity(frame, len, par);
- LogTrace(frame, len, rsamples, rsamples, par, TRUE);
+ LogTrace(frame, len, rsamples, rsamples, par, true);
}
}
//-----------------------------------------------------------------------------
// Wait a certain time for tag response
-// If a response is captured return TRUE
-// If it takes too long return FALSE
+// If a response is captured return true
+// If it takes too long return false
//-----------------------------------------------------------------------------
static int GetIClassAnswer(uint8_t *receivedResponse, int maxLen, int *samples, int *elapsed) //uint8_t *buffer
{
uint8_t b;
if (elapsed) *elapsed = 0;
- bool skip = FALSE;
+ bool skip = false;
c = 0;
for(;;) {
WDT_HIT();
- if(BUTTON_PRESS()) return FALSE;
+ if(BUTTON_PRESS()) return false;
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x00; // To make use of exact timing of next command from reader!!
if (elapsed) (*elapsed)++;
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
- if(c < timeout) { c++; } else { return FALSE; }
+ if(c < timeout) { c++; } else { return false; }
b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
skip = !skip;
if(skip) continue;
if(ManchesterDecoding(b & 0x0f)) {
*samples = c << 3;
- return TRUE;
+ return true;
}
}
}
int ReaderReceiveIClass(uint8_t* receivedAnswer)
{
int samples = 0;
- if (!GetIClassAnswer(receivedAnswer,160,&samples,0)) return FALSE;
+ if (!GetIClassAnswer(receivedAnswer,160,&samples,0)) return false;
rsamples += samples;
if (tracing) {
uint8_t parity[MAX_PARITY_SIZE];
GetParity(receivedAnswer, Demod.len, parity);
- LogTrace(receivedAnswer,Demod.len,rsamples,rsamples,parity,FALSE);
+ LogTrace(receivedAnswer,Demod.len,rsamples,rsamples,parity,false);
}
- if(samples == 0) return FALSE;
+ if(samples == 0) return false;
return Demod.len;
}
{
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
// Reset trace buffer
- set_tracing(TRUE);
- clear_trace();
+ set_tracing(true);
+ clear_trace();
// Setup SSC
- FpgaSetupSsc();
+ FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A);
// Start from off (no field generated)
// Signal field is off with the appropriate LED
LED_D_OFF();
}
-size_t sendCmdGetResponseWithRetries(uint8_t* command, size_t cmdsize, uint8_t* resp, uint8_t expected_size, uint8_t retries)
+bool sendCmdGetResponseWithRetries(uint8_t* command, size_t cmdsize, uint8_t* resp, uint8_t expected_size, uint8_t retries)
{
while(retries-- > 0)
{
ReaderTransmitIClass(command, cmdsize);
if(expected_size == ReaderReceiveIClass(resp)){
- return 0;
+ return true;
}
}
- return 1;//Error
+ return false;//Error
}
/**
* 1 = Got CSN
* 2 = Got CSN and CC
*/
-uint8_t handshakeIclassTag(uint8_t *card_data)
+uint8_t handshakeIclassTag_ext(uint8_t *card_data, bool use_credit_key)
{
static uint8_t act_all[] = { 0x0a };
- static uint8_t identify[] = { 0x0c };
+ //static uint8_t identify[] = { 0x0c };
+ static uint8_t identify[] = { 0x0c, 0x00, 0x73, 0x33 };
static uint8_t select[] = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-
-
- static uint8_t readcheck_cc[]= { 0x88, 0x02,};
+ static uint8_t readcheck_cc[]= { 0x88, 0x02 };
+ if (use_credit_key)
+ readcheck_cc[0] = 0x18;
+ else
+ readcheck_cc[0] = 0x88;
uint8_t resp[ICLASS_BUFFER_SIZE];
//Flag that we got to at least stage 1, read CSN
read_status = 1;
- // Card selected, now read e-purse (cc)
+ // Card selected, now read e-purse (cc) (only 8 bytes no CRC)
ReaderTransmitIClass(readcheck_cc, sizeof(readcheck_cc));
if(ReaderReceiveIClass(resp) == 8) {
//Save CC (e-purse) in response data
return read_status;
}
+uint8_t handshakeIclassTag(uint8_t *card_data) {
+ return handshakeIclassTag_ext(card_data, false);
+}
// Reader iClass Anticollission
uint8_t card_data[6 * 8]={0};
memset(card_data, 0xFF, sizeof(card_data));
- uint8_t last_csn[8]={0};
-
+ uint8_t last_csn[8]={0,0,0,0,0,0,0,0};
+ uint8_t resp[ICLASS_BUFFER_SIZE];
+ memset(resp, 0xFF, sizeof(resp));
//Read conf block CRC(0x01) => 0xfa 0x22
uint8_t readConf[] = { ICLASS_CMD_READ_OR_IDENTIFY,0x01, 0xfa, 0x22};
- //Read conf block CRC(0x05) => 0xde 0x64
+ //Read App Issuer Area block CRC(0x05) => 0xde 0x64
uint8_t readAA[] = { ICLASS_CMD_READ_OR_IDENTIFY,0x05, 0xde, 0x64};
-
int read_status= 0;
uint8_t result_status = 0;
+ // flag to read until one tag is found successfully
bool abort_after_read = arg0 & FLAG_ICLASS_READER_ONLY_ONCE;
+ // flag to only try 5 times to find one tag then return
bool try_once = arg0 & FLAG_ICLASS_READER_ONE_TRY;
- set_tracing(TRUE);
+ // if neither abort_after_read nor try_once then continue reading until button pressed.
+
+ bool use_credit_key = arg0 & FLAG_ICLASS_READER_CEDITKEY;
+ // test flags for what blocks to be sure to read
+ uint8_t flagReadConfig = arg0 & FLAG_ICLASS_READER_CONF;
+ uint8_t flagReadCC = arg0 & FLAG_ICLASS_READER_CC;
+ uint8_t flagReadAA = arg0 & FLAG_ICLASS_READER_AA;
+
+ set_tracing(true);
setupIclassReader();
uint16_t tryCnt=0;
- while(!BUTTON_PRESS())
+ bool userCancelled = BUTTON_PRESS() || usb_poll_validate_length();
+ while(!userCancelled)
{
- if (try_once && tryCnt > 5) break;
+ // if only looking for one card try 2 times if we missed it the first time
+ if (try_once && tryCnt > 2) break;
tryCnt++;
if(!tracing) {
DbpString("Trace full");
}
WDT_HIT();
- read_status = handshakeIclassTag(card_data);
+ read_status = handshakeIclassTag_ext(card_data, use_credit_key);
if(read_status == 0) continue;
if(read_status == 1) result_status = FLAG_ICLASS_READER_CSN;
// moving CC forward 8 bytes
memcpy(card_data+16,card_data+8, 8);
//Read block 1, config
- if(arg0 & FLAG_ICLASS_READER_CONF)
- {
- if(sendCmdGetResponseWithRetries(readConf, sizeof(readConf),card_data+8, 10, 10))
- {
- Dbprintf("Failed to dump config block");
- }else
+ if(flagReadConfig) {
+ if(sendCmdGetResponseWithRetries(readConf, sizeof(readConf), resp, 10, 10))
{
result_status |= FLAG_ICLASS_READER_CONF;
+ memcpy(card_data+8, resp, 8);
+ } else {
+ Dbprintf("Failed to dump config block");
}
}
//Read block 5, AA
- if(arg0 & FLAG_ICLASS_READER_AA){
- if(sendCmdGetResponseWithRetries(readAA, sizeof(readAA),card_data+(8*4), 10, 10))
- {
-// Dbprintf("Failed to dump AA block");
- }else
+ if(flagReadAA) {
+ if(sendCmdGetResponseWithRetries(readAA, sizeof(readAA), resp, 10, 10))
{
result_status |= FLAG_ICLASS_READER_AA;
+ memcpy(card_data+(8*5), resp, 8);
+ } else {
+ //Dbprintf("Failed to dump AA block");
}
}
// (3,4 write-only, kc and kd)
// 5 Application issuer area
//
- //Then we can 'ship' back the 8 * 5 bytes of data,
+ //Then we can 'ship' back the 8 * 6 bytes of data,
// with 0xFF:s in block 3 and 4.
LED_B_ON();
- //Send back to client, but don't bother if we already sent this
+ //Send back to client, but don't bother if we already sent this -
+ // only useful if looping in arm (not try_once && not abort_after_read)
if(memcmp(last_csn, card_data, 8) != 0)
{
- // If caller requires that we get CC, continue until we got it
- if( (arg0 & read_status & FLAG_ICLASS_READER_CC) || !(arg0 & FLAG_ICLASS_READER_CC))
- {
+ // If caller requires that we get Conf, CC, AA, continue until we got it
+ if( (result_status ^ FLAG_ICLASS_READER_CSN ^ flagReadConfig ^ flagReadCC ^ flagReadAA) == 0) {
cmd_send(CMD_ACK,result_status,0,0,card_data,sizeof(card_data));
if(abort_after_read) {
LED_A_OFF();
+ LED_B_OFF();
return;
}
//Save that we already sent this....
}
LED_B_OFF();
+ userCancelled = BUTTON_PRESS() || usb_poll_validate_length();
}
- cmd_send(CMD_ACK,0,0,0,card_data, 0);
- LED_A_OFF();
+ if (userCancelled) {
+ cmd_send(CMD_ACK,0xFF,0,0,card_data, 0);
+ } else {
+ cmd_send(CMD_ACK,0,0,0,card_data, 0);
+ }
+ LED_A_OFF();
}
void ReaderIClass_Replay(uint8_t arg0, uint8_t *MAC) {
uint8_t resp[ICLASS_BUFFER_SIZE];
setupIclassReader();
- set_tracing(TRUE);
+ set_tracing(true);
while(!BUTTON_PRESS()) {
//for now replay captured auth (as cc not updated)
memcpy(check+5,MAC,4);
- if(sendCmdGetResponseWithRetries(check, sizeof(check),resp, 4, 5))
+ if(!sendCmdGetResponseWithRetries(check, sizeof(check),resp, 4, 5))
{
Dbprintf("Error: Authentication Fail!");
continue;
read[2] = crc >> 8;
read[3] = crc & 0xff;
- if(sendCmdGetResponseWithRetries(read, sizeof(read),resp, 10, 10))
+ if(!sendCmdGetResponseWithRetries(read, sizeof(read),resp, 10, 10))
{
Dbprintf("Dump config (block 1) failed");
continue;
read[2] = crc >> 8;
read[3] = crc & 0xff;
- if(!sendCmdGetResponseWithRetries(read, sizeof(read), resp, 10, 10))
+ if(sendCmdGetResponseWithRetries(read, sizeof(read), resp, 10, 10))
{
Dbprintf(" %02x: %02x %02x %02x %02x %02x %02x %02x %02x",
block, resp[0], resp[1], resp[2],
LED_A_OFF();
}
-//2. Create Read method (cut-down from above) based off responses from 1.
-// Since we have the MAC could continue to use replay function.
-//3. Create Write method
-/*
-void IClass_iso14443A_write(uint8_t arg0, uint8_t blockNo, uint8_t *data, uint8_t *MAC) {
- uint8_t act_all[] = { 0x0a };
- uint8_t identify[] = { 0x0c };
- uint8_t select[] = { 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- uint8_t readcheck_cc[]= { 0x88, 0x02 };
- uint8_t check[] = { 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- uint8_t read[] = { 0x0c, 0x00, 0x00, 0x00 };
- uint8_t write[] = { 0x87, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
-
- uint16_t crc = 0;
-
- uint8_t* resp = (((uint8_t *)BigBuf) + 3560);
-
- // Reset trace buffer
- memset(trace, 0x44, RECV_CMD_OFFSET);
- traceLen = 0;
+void iClass_ReadCheck(uint8_t blockNo, uint8_t keyType) {
+ uint8_t readcheck[] = { keyType, blockNo };
+ uint8_t resp[] = {0,0,0,0,0,0,0,0};
+ size_t isOK = 0;
+ isOK = sendCmdGetResponseWithRetries(readcheck, sizeof(readcheck), resp, sizeof(resp), 6);
+ cmd_send(CMD_ACK,isOK,0,0,0,0);
+}
- // Setup SSC
- FpgaSetupSsc();
- // Start from off (no field generated)
- // Signal field is off with the appropriate LED
- LED_D_OFF();
- FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
- SpinDelay(200);
+void iClass_Authentication(uint8_t *MAC) {
+ uint8_t check[] = { ICLASS_CMD_CHECK, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ uint8_t resp[ICLASS_BUFFER_SIZE];
+ memcpy(check+5,MAC,4);
+ bool isOK;
+ isOK = sendCmdGetResponseWithRetries(check, sizeof(check), resp, 4, 6);
+ cmd_send(CMD_ACK,isOK,0,0,0,0);
+}
+bool iClass_ReadBlock(uint8_t blockNo, uint8_t *readdata) {
+ uint8_t readcmd[] = {ICLASS_CMD_READ_OR_IDENTIFY, blockNo, 0x00, 0x00}; //0x88, 0x00 // can i use 0C?
+ char bl = blockNo;
+ uint16_t rdCrc = iclass_crc16(&bl, 1);
+ readcmd[2] = rdCrc >> 8;
+ readcmd[3] = rdCrc & 0xff;
+ uint8_t resp[] = {0,0,0,0,0,0,0,0,0,0};
+ bool isOK = false;
+
+ //readcmd[1] = blockNo;
+ isOK = sendCmdGetResponseWithRetries(readcmd, sizeof(readcmd), resp, 10, 10);
+ memcpy(readdata, resp, sizeof(resp));
+
+ return isOK;
+}
- SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
+void iClass_ReadBlk(uint8_t blockno) {
+ uint8_t readblockdata[] = {0,0,0,0,0,0,0,0,0,0};
+ bool isOK = false;
+ isOK = iClass_ReadBlock(blockno, readblockdata);
+ cmd_send(CMD_ACK, isOK, 0, 0, readblockdata, 8);
+}
- // Now give it time to spin up.
- // Signal field is on with the appropriate LED
- FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
- SpinDelay(200);
+void iClass_Dump(uint8_t blockno, uint8_t numblks) {
+ uint8_t readblockdata[] = {0,0,0,0,0,0,0,0,0,0};
+ bool isOK = false;
+ uint8_t blkCnt = 0;
- LED_A_ON();
+ BigBuf_free();
+ uint8_t *dataout = BigBuf_malloc(255*8);
+ if (dataout == NULL){
+ Dbprintf("out of memory");
+ OnError(1);
+ return;
+ }
+ memset(dataout,0xFF,255*8);
+
+ for (;blkCnt < numblks; blkCnt++) {
+ isOK = iClass_ReadBlock(blockno+blkCnt, readblockdata);
+ if (!isOK || (readblockdata[0] == 0xBB || readblockdata[7] == 0xBB || readblockdata[2] == 0xBB)) { //try again
+ isOK = iClass_ReadBlock(blockno+blkCnt, readblockdata);
+ if (!isOK) {
+ Dbprintf("Block %02X failed to read", blkCnt+blockno);
+ break;
+ }
+ }
+ memcpy(dataout+(blkCnt*8),readblockdata,8);
+ }
+ //return pointer to dump memory in arg3
+ cmd_send(CMD_ACK,isOK,blkCnt,BigBuf_max_traceLen(),0,0);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ LEDsoff();
+ BigBuf_free();
+}
- for(int i=0;i<1;i++) {
-
- if(traceLen > TRACE_SIZE) {
- DbpString("Trace full");
- break;
+bool iClass_WriteBlock_ext(uint8_t blockNo, uint8_t *data) {
+ uint8_t write[] = { ICLASS_CMD_UPDATE, blockNo, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ //uint8_t readblockdata[10];
+ //write[1] = blockNo;
+ memcpy(write+2, data, 12); // data + mac
+ char *wrCmd = (char *)(write+1);
+ uint16_t wrCrc = iclass_crc16(wrCmd, 13);
+ write[14] = wrCrc >> 8;
+ write[15] = wrCrc & 0xff;
+ uint8_t resp[] = {0,0,0,0,0,0,0,0,0,0};
+ bool isOK = false;
+
+ isOK = sendCmdGetResponseWithRetries(write,sizeof(write),resp,sizeof(resp),10);
+ if (isOK) { //if reader responded correctly
+ //Dbprintf("WriteResp: %02X%02X%02X%02X%02X%02X%02X%02X%02X%02X",resp[0],resp[1],resp[2],resp[3],resp[4],resp[5],resp[6],resp[7],resp[8],resp[9]);
+ if (memcmp(write+2,resp,8)) { //if response is not equal to write values
+ if (blockNo != 3 && blockNo != 4) { //if not programming key areas (note key blocks don't get programmed with actual key data it is xor data)
+ //error try again
+ isOK = sendCmdGetResponseWithRetries(write,sizeof(write),resp,sizeof(resp),10);
+ }
+
}
-
- if (BUTTON_PRESS()) break;
-
- // Send act_all
- ReaderTransmitIClass(act_all, 1);
- // Card present?
- if(ReaderReceiveIClass(resp)) {
- ReaderTransmitIClass(identify, 1);
- if(ReaderReceiveIClass(resp) == 10) {
- // Select card
- memcpy(&select[1],resp,8);
- ReaderTransmitIClass(select, sizeof(select));
-
- if(ReaderReceiveIClass(resp) == 10) {
- Dbprintf(" Selected CSN: %02x %02x %02x %02x %02x %02x %02x %02x",
- resp[0], resp[1], resp[2],
- resp[3], resp[4], resp[5],
- resp[6], resp[7]);
- }
- // Card selected
- Dbprintf("Readcheck on Sector 2");
- ReaderTransmitIClass(readcheck_cc, sizeof(readcheck_cc));
- if(ReaderReceiveIClass(resp) == 8) {
- Dbprintf(" CC: %02x %02x %02x %02x %02x %02x %02x %02x",
- resp[0], resp[1], resp[2],
- resp[3], resp[4], resp[5],
- resp[6], resp[7]);
- }else return;
- Dbprintf("Authenticate");
- //for now replay captured auth (as cc not updated)
- memcpy(check+5,MAC,4);
- Dbprintf(" AA: %02x %02x %02x %02x",
- check[5], check[6], check[7],check[8]);
- ReaderTransmitIClass(check, sizeof(check));
- if(ReaderReceiveIClass(resp) == 4) {
- Dbprintf(" AR: %02x %02x %02x %02x",
- resp[0], resp[1], resp[2],resp[3]);
- }else {
- Dbprintf("Error: Authentication Fail!");
- return;
- }
- Dbprintf("Write Block");
-
- //read configuration for max block number
- read_success=false;
- read[1]=1;
- uint8_t *blockno=&read[1];
- crc = iclass_crc16((char *)blockno,1);
- read[2] = crc >> 8;
- read[3] = crc & 0xff;
- while(!read_success){
- ReaderTransmitIClass(read, sizeof(read));
- if(ReaderReceiveIClass(resp) == 10) {
- read_success=true;
- mem=resp[5];
- memory.k16= (mem & 0x80);
- memory.book= (mem & 0x20);
- memory.k2= (mem & 0x8);
- memory.lockauth= (mem & 0x2);
- memory.keyaccess= (mem & 0x1);
-
- }
- }
- if (memory.k16){
- cardsize=255;
- }else cardsize=32;
- //check card_size
-
- memcpy(write+1,blockNo,1);
- memcpy(write+2,data,8);
- memcpy(write+10,mac,4);
- while(!send_success){
- ReaderTransmitIClass(write, sizeof(write));
- if(ReaderReceiveIClass(resp) == 10) {
- write_success=true;
- }
- }//
+ }
+ return isOK;
+}
+
+void iClass_WriteBlock(uint8_t blockNo, uint8_t *data) {
+ bool isOK = iClass_WriteBlock_ext(blockNo, data);
+ if (isOK){
+ Dbprintf("Write block [%02x] successful",blockNo);
+ } else {
+ Dbprintf("Write block [%02x] failed",blockNo);
+ }
+ cmd_send(CMD_ACK,isOK,0,0,0,0);
+}
+
+void iClass_Clone(uint8_t startblock, uint8_t endblock, uint8_t *data) {
+ int i;
+ int written = 0;
+ int total_block = (endblock - startblock) + 1;
+ for (i = 0; i < total_block;i++){
+ // block number
+ if (iClass_WriteBlock_ext(i+startblock, data+(i*12))){
+ Dbprintf("Write block [%02x] successful",i + startblock);
+ written++;
+ } else {
+ if (iClass_WriteBlock_ext(i+startblock, data+(i*12))){
+ Dbprintf("Write block [%02x] successful",i + startblock);
+ written++;
+ } else {
+ Dbprintf("Write block [%02x] failed",i + startblock);
+ }
}
- WDT_HIT();
}
-
- LED_A_OFF();
-}*/
+ if (written == total_block)
+ Dbprintf("Clone complete");
+ else
+ Dbprintf("Clone incomplete");
+
+ cmd_send(CMD_ACK,1,0,0,0,0);
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ LEDsoff();
+}
projects / proxmark3-svn / blobdiff