//-----------------------------------------------------------------------------
// Jonathan Westhues, April 2006
+// iZsh <izsh at fail0verflow.com>, 2014
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// mode once it is configured.
//-----------------------------------------------------------------------------
-#include "proxmark3.h"
+#include "fpgaloader.h"
+
+#include <stdint.h>
+#include <stddef.h>
+#include <stdbool.h>
#include "apps.h"
+#include "fpga.h"
+#include "proxmark3.h"
#include "util.h"
#include "string.h"
+#include "BigBuf.h"
+#include "zlib.h"
+
+// remember which version of the bitstream we have already downloaded to the FPGA
+static int downloaded_bitstream = 0;
+
+// this is where the bitstreams are located in memory:
+extern uint8_t _binary_obj_fpga_all_bit_z_start, _binary_obj_fpga_all_bit_z_end;
+
+static uint8_t *fpga_image_ptr = NULL;
+static uint32_t uncompressed_bytes_cnt;
+
+#define OUTPUT_BUFFER_LEN 80
//-----------------------------------------------------------------------------
// Set up the Serial Peripheral Interface as master
// Disable PIO control of the following pins, allows use by the SPI peripheral
AT91C_BASE_PIOA->PIO_PDR =
- GPIO_NCS0 |
- GPIO_NCS2 |
- GPIO_MISO |
- GPIO_MOSI |
+ GPIO_NCS0 |
+ GPIO_NCS2 |
+ GPIO_MISO |
+ GPIO_MOSI |
GPIO_SPCK;
AT91C_BASE_PIOA->PIO_ASR =
- GPIO_NCS0 |
- GPIO_MISO |
- GPIO_MOSI |
+ GPIO_NCS0 |
+ GPIO_MISO |
+ GPIO_MOSI |
GPIO_SPCK;
AT91C_BASE_PIOA->PIO_BSR = GPIO_NCS2;
switch (mode) {
case SPI_FPGA_MODE:
AT91C_BASE_SPI->SPI_MR =
- ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
- (14 << 16) | // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11)
- ( 0 << 7) | // Local Loopback Disabled
- ( 1 << 4) | // Mode Fault Detection disabled
- ( 0 << 2) | // Chip selects connected directly to peripheral
- ( 0 << 1) | // Fixed Peripheral Select
- ( 1 << 0); // Master Mode
+ ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
+ (14 << 16) | // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11)
+ ( 0 << 7) | // Local Loopback Disabled
+ ( 1 << 4) | // Mode Fault Detection disabled
+ ( 0 << 2) | // Chip selects connected directly to peripheral
+ ( 0 << 1) | // Fixed Peripheral Select
+ ( 1 << 0); // Master Mode
AT91C_BASE_SPI->SPI_CSR[0] =
- ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
- ( 1 << 16) | // Delay Before SPCK (1 MCK period)
- ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
- ( 8 << 4) | // Bits per Transfer (16 bits)
- ( 0 << 3) | // Chip Select inactive after transfer
- ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
- ( 0 << 0); // Clock Polarity inactive state is logic 0
+ ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
+ ( 1 << 16) | // Delay Before SPCK (1 MCK period)
+ ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
+ ( 8 << 4) | // Bits per Transfer (16 bits)
+ ( 0 << 3) | // Chip Select inactive after transfer
+ ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
+ ( 0 << 0); // Clock Polarity inactive state is logic 0
break;
case SPI_LCD_MODE:
AT91C_BASE_SPI->SPI_MR =
- ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
- (11 << 16) | // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10)
- ( 0 << 7) | // Local Loopback Disabled
- ( 1 << 4) | // Mode Fault Detection disabled
- ( 0 << 2) | // Chip selects connected directly to peripheral
- ( 0 << 1) | // Fixed Peripheral Select
- ( 1 << 0); // Master Mode
+ ( 0 << 24) | // Delay between chip selects (take default: 6 MCK periods)
+ (11 << 16) | // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10)
+ ( 0 << 7) | // Local Loopback Disabled
+ ( 1 << 4) | // Mode Fault Detection disabled
+ ( 0 << 2) | // Chip selects connected directly to peripheral
+ ( 0 << 1) | // Fixed Peripheral Select
+ ( 1 << 0); // Master Mode
AT91C_BASE_SPI->SPI_CSR[2] =
- ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
- ( 1 << 16) | // Delay Before SPCK (1 MCK period)
- ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
- ( 1 << 4) | // Bits per Transfer (9 bits)
- ( 0 << 3) | // Chip Select inactive after transfer
- ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
- ( 0 << 0); // Clock Polarity inactive state is logic 0
+ ( 1 << 24) | // Delay between Consecutive Transfers (32 MCK periods)
+ ( 1 << 16) | // Delay Before SPCK (1 MCK period)
+ ( 6 << 8) | // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud
+ ( 1 << 4) | // Bits per Transfer (9 bits)
+ ( 0 << 3) | // Chip Select inactive after transfer
+ ( 1 << 1) | // Clock Phase data captured on leading edge, changes on following edge
+ ( 0 << 0); // Clock Polarity inactive state is logic 0
break;
- default: // Disable SPI
+ default: // Disable SPI
AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIDIS;
break;
}
}
//-----------------------------------------------------------------------------
-// Set up the synchronous serial port, with the one set of options that we
-// always use when we are talking to the FPGA. Both RX and TX are enabled.
+// Set up the synchronous serial port with the set of options that fits
+// the FPGA mode. Both RX and TX are always enabled.
//-----------------------------------------------------------------------------
-void FpgaSetupSsc(void)
-{
+void FpgaSetupSsc(uint16_t FPGA_mode) {
// First configure the GPIOs, and get ourselves a clock.
AT91C_BASE_PIOA->PIO_ASR =
- GPIO_SSC_FRAME |
- GPIO_SSC_DIN |
- GPIO_SSC_DOUT |
+ GPIO_SSC_FRAME |
+ GPIO_SSC_DIN |
+ GPIO_SSC_DOUT |
GPIO_SSC_CLK;
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
// Now set up the SSC proper, starting from a known state.
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
- // RX clock comes from TX clock, RX starts when TX starts, data changes
- // on RX clock rising edge, sampled on falling edge
+ // RX clock comes from TX clock, RX starts on Transmit Start,
+ // data and frame signal is sampled on falling edge of RK
AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1);
- // 8 bits per transfer, no loopback, MSB first, 1 transfer per sync
- // pulse, no output sync, start on positive-going edge of sync
- AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+ // 8, 16 or 32 bits per transfer, no loopback, MSB first, 1 transfer per sync
+ // pulse, no output sync
+ if ((FPGA_mode & FPGA_MAJOR_MODE_MASK) == FPGA_MAJOR_MODE_HF_READER && FpgaGetCurrent() == FPGA_BITSTREAM_HF) {
+ AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(16) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+ } else {
+ AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+ }
- // clock comes from TK pin, no clock output, outputs change on falling
- // edge of TK, start on rising edge of TF
- AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5);
+ // TX clock comes from TK pin, no clock output, outputs change on rising edge of TK,
+ // TF (frame sync) is sampled on falling edge of TK, start TX on rising edge of TF
+ AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) | SSC_CLOCK_MODE_START(5);
// tx framing is the same as the rx framing
AT91C_BASE_SSC->SSC_TFMR = AT91C_BASE_SSC->SSC_RFMR;
// ourselves, not to another buffer). The stuff to manipulate those buffers
// is in apps.h, because it should be inlined, for speed.
//-----------------------------------------------------------------------------
-bool FpgaSetupSscDma(uint8_t *buf, int len)
+bool FpgaSetupSscDma(uint8_t *buf, uint16_t sample_count) {
+ if (buf == NULL) return false;
+
+ AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; // Disable DMA Transfer
+ AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf; // transfer to this memory address
+ AT91C_BASE_PDC_SSC->PDC_RCR = sample_count; // transfer this many samples
+ AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf; // next transfer to same memory address
+ AT91C_BASE_PDC_SSC->PDC_RNCR = sample_count; // ... with same number of samples
+ AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN; // go!
+ return true;
+}
+
+
+//----------------------------------------------------------------------------
+// Uncompress (inflate) the FPGA data. Returns one decompressed byte with
+// each call.
+//----------------------------------------------------------------------------
+static int get_from_fpga_combined_stream(z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+ if (fpga_image_ptr == compressed_fpga_stream->next_out) { // need more data
+ compressed_fpga_stream->next_out = output_buffer;
+ compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
+ fpga_image_ptr = output_buffer;
+ int res = inflate(compressed_fpga_stream, Z_SYNC_FLUSH);
+ if (res != Z_OK)
+ Dbprintf("inflate returned: %d, %s", res, compressed_fpga_stream->msg);
+
+ if (res < 0)
+ return res;
+ }
+
+ uncompressed_bytes_cnt++;
+
+ return *fpga_image_ptr++;
+}
+
+//----------------------------------------------------------------------------
+// Undo the interleaving of several FPGA config files. FPGA config files
+// are combined into one big file:
+// 288 bytes from FPGA file 1, followed by 288 bytes from FGPA file 2, etc.
+//----------------------------------------------------------------------------
+static int get_from_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+ while((uncompressed_bytes_cnt / FPGA_INTERLEAVE_SIZE) % fpga_bitstream_num != (bitstream_version - 1)) {
+ // skip undesired data belonging to other bitstream_versions
+ get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
+ }
+
+ return get_from_fpga_combined_stream(compressed_fpga_stream, output_buffer);
+
+}
+
+
+static voidpf fpga_inflate_malloc(voidpf opaque, uInt items, uInt size)
+{
+ return BigBuf_malloc(items*size);
+}
+
+
+static void fpga_inflate_free(voidpf opaque, voidpf address)
{
- if (buf == NULL) {
- return false;
- }
-
- AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;
- AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf;
- AT91C_BASE_PDC_SSC->PDC_RCR = len;
- AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf;
- AT91C_BASE_PDC_SSC->PDC_RNCR = len;
- AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;
-
- return true;
+ BigBuf_free(); BigBuf_Clear_ext(false);
+}
+
+
+//----------------------------------------------------------------------------
+// Initialize decompression of the respective (HF or LF) FPGA stream
+//----------------------------------------------------------------------------
+static bool reset_fpga_stream(int bitstream_version, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
+{
+ uint8_t header[FPGA_BITSTREAM_FIXED_HEADER_SIZE];
+
+ uncompressed_bytes_cnt = 0;
+
+ // initialize z_stream structure for inflate:
+ compressed_fpga_stream->next_in = &_binary_obj_fpga_all_bit_z_start;
+ compressed_fpga_stream->avail_in = &_binary_obj_fpga_all_bit_z_end - &_binary_obj_fpga_all_bit_z_start;
+ compressed_fpga_stream->next_out = output_buffer;
+ compressed_fpga_stream->avail_out = OUTPUT_BUFFER_LEN;
+ compressed_fpga_stream->zalloc = &fpga_inflate_malloc;
+ compressed_fpga_stream->zfree = &fpga_inflate_free;
+
+ inflateInit2(compressed_fpga_stream, 0);
+
+ fpga_image_ptr = output_buffer;
+
+ for (uint16_t i = 0; i < FPGA_BITSTREAM_FIXED_HEADER_SIZE; i++) {
+ header[i] = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+ }
+
+ // Check for a valid .bit file (starts with bitparse_fixed_header)
+ if(memcmp(bitparse_fixed_header, header, FPGA_BITSTREAM_FIXED_HEADER_SIZE) == 0) {
+ return true;
+ } else {
+ return false;
+ }
}
+
static void DownloadFPGA_byte(unsigned char w)
{
#define SEND_BIT(x) { if(w & (1<<x) ) HIGH(GPIO_FPGA_DIN); else LOW(GPIO_FPGA_DIN); HIGH(GPIO_FPGA_CCLK); LOW(GPIO_FPGA_CCLK); }
SEND_BIT(0);
}
-// Download the fpga image starting at FpgaImage and with length FpgaImageLen bytes
-// If bytereversal is set: reverse the byte order in each 4-byte word
-static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int bytereversal)
+// Download the fpga image starting at current stream position with length FpgaImageLen bytes
+static void DownloadFPGA(int bitstream_version, int FpgaImageLen, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
{
+
+ //Dbprintf("DownloadFPGA(len: %d)", FpgaImageLen);
+
int i=0;
AT91C_BASE_PIOA->PIO_OER = GPIO_FPGA_ON;
AT91C_BASE_PIOA->PIO_PER = GPIO_FPGA_ON;
- HIGH(GPIO_FPGA_ON); // ensure everything is powered on
+ HIGH(GPIO_FPGA_ON); // ensure everything is powered on
SpinDelay(50);
LED_D_ON();
// These pins are inputs
- AT91C_BASE_PIOA->PIO_ODR =
- GPIO_FPGA_NINIT |
- GPIO_FPGA_DONE;
+ AT91C_BASE_PIOA->PIO_ODR =
+ GPIO_FPGA_NINIT |
+ GPIO_FPGA_DONE;
// PIO controls the following pins
- AT91C_BASE_PIOA->PIO_PER =
- GPIO_FPGA_NINIT |
- GPIO_FPGA_DONE;
+ AT91C_BASE_PIOA->PIO_PER =
+ GPIO_FPGA_NINIT |
+ GPIO_FPGA_DONE;
// Enable pull-ups
AT91C_BASE_PIOA->PIO_PPUER =
GPIO_FPGA_NINIT |
LOW(GPIO_FPGA_DIN);
// These pins are outputs
AT91C_BASE_PIOA->PIO_OER =
- GPIO_FPGA_NPROGRAM |
- GPIO_FPGA_CCLK |
+ GPIO_FPGA_NPROGRAM |
+ GPIO_FPGA_CCLK |
GPIO_FPGA_DIN;
// enter FPGA configuration mode
return;
}
- if(bytereversal) {
- /* This is only supported for uint32_t aligned images */
- if( ((int)FpgaImage % sizeof(uint32_t)) == 0 ) {
- i=0;
- while(FpgaImageLen-->0)
- DownloadFPGA_byte(FpgaImage[(i++)^0x3]);
- /* Explanation of the magic in the above line:
- * i^0x3 inverts the lower two bits of the integer i, counting backwards
- * for each 4 byte increment. The generated sequence of (i++)^3 is
- * 3 2 1 0 7 6 5 4 11 10 9 8 15 14 13 12 etc. pp.
- */
+ for(i = 0; i < FpgaImageLen; i++) {
+ int b = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+ if (b < 0) {
+ Dbprintf("Error %d during FpgaDownload", b);
+ break;
}
- } else {
- while(FpgaImageLen-->0)
- DownloadFPGA_byte(*FpgaImage++);
+ DownloadFPGA_byte(b);
}
// continue to clock FPGA until ready signal goes high
LED_D_OFF();
}
-static char *bitparse_headers_start;
-static char *bitparse_bitstream_end;
-static int bitparse_initialized;
+
/* Simple Xilinx .bit parser. The file starts with the fixed opaque byte sequence
* 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01
* After that the format is 1 byte section type (ASCII character), 2 byte length
* (big endian), <length> bytes content. Except for section 'e' which has 4 bytes
* length.
*/
-static const char _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01};
-static int bitparse_init(void * start_address, void *end_address)
-{
- bitparse_initialized = 0;
-
- if(memcmp(_bitparse_fixed_header, start_address, sizeof(_bitparse_fixed_header)) != 0) {
- return 0; /* Not matched */
- } else {
- bitparse_headers_start= ((char*)start_address) + sizeof(_bitparse_fixed_header);
- bitparse_bitstream_end= (char*)end_address;
- bitparse_initialized = 1;
- return 1;
- }
-}
-
-int bitparse_find_section(char section_name, char **section_start, unsigned int *section_length)
+static int bitparse_find_section(int bitstream_version, char section_name, unsigned int *section_length, z_streamp compressed_fpga_stream, uint8_t *output_buffer)
{
- char *pos = bitparse_headers_start;
int result = 0;
-
- if(!bitparse_initialized) return 0;
-
- while(pos < bitparse_bitstream_end) {
- char current_name = *pos++;
+ #define MAX_FPGA_BIT_STREAM_HEADER_SEARCH 100 // maximum number of bytes to search for the requested section
+ uint16_t numbytes = 0;
+ while(numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH) {
+ char current_name = get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+ numbytes++;
unsigned int current_length = 0;
if(current_name < 'a' || current_name > 'e') {
/* Strange section name, abort */
switch(current_name) {
case 'e':
/* Four byte length field */
- current_length += (*pos++) << 24;
- current_length += (*pos++) << 16;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 24;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 16;
+ numbytes += 2;
default: /* Fall through, two byte length field */
- current_length += (*pos++) << 8;
- current_length += (*pos++) << 0;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 8;
+ current_length += get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer) << 0;
+ numbytes += 2;
}
if(current_name != 'e' && current_length > 255) {
if(current_name == section_name) {
/* Found it */
- *section_start = pos;
*section_length = current_length;
result = 1;
break;
}
- pos += current_length; /* Skip section */
+ for (uint16_t i = 0; i < current_length && numbytes < MAX_FPGA_BIT_STREAM_HEADER_SEARCH; i++) {
+ get_from_fpga_stream(bitstream_version, compressed_fpga_stream, output_buffer);
+ numbytes++;
+ }
}
return result;
}
-//-----------------------------------------------------------------------------
-// Find out which FPGA image format is stored in flash, then call DownloadFPGA
-// with the right parameters to download the image
-//-----------------------------------------------------------------------------
-extern char _binary_fpga_bit_start, _binary_fpga_bit_end;
-void FpgaDownloadAndGo(void)
+
+//----------------------------------------------------------------------------
+// Check which FPGA image is currently loaded (if any). If necessary
+// decompress and load the correct (HF or LF) image to the FPGA
+//----------------------------------------------------------------------------
+void FpgaDownloadAndGo(int bitstream_version)
{
- /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start
- */
- if(bitparse_init(&_binary_fpga_bit_start, &_binary_fpga_bit_end)) {
- /* Successfully initialized the .bit parser. Find the 'e' section and
- * send its contents to the FPGA.
- */
- char *bitstream_start;
- unsigned int bitstream_length;
- if(bitparse_find_section('e', &bitstream_start, &bitstream_length)) {
- DownloadFPGA(bitstream_start, bitstream_length, 0);
-
- return; /* All done */
- }
+ z_stream compressed_fpga_stream;
+ uint8_t output_buffer[OUTPUT_BUFFER_LEN] = {0x00};
+
+ // check whether or not the bitstream is already loaded
+ if (downloaded_bitstream == bitstream_version) {
+ FpgaEnableTracing();
+ return;
}
- /* Fallback for the old flash image format: Check for the magic marker 0xFFFFFFFF
- * 0xAA995566 at address 0x102000. This is raw bitstream with a size of 336,768 bits
- * = 10,524 uint32_t, stored as uint32_t e.g. little-endian in memory, but each DWORD
- * is still to be transmitted in MSBit first order. Set the invert flag to indicate
- * that the DownloadFPGA function should invert every 4 byte sequence when doing
- * the bytewise download.
- */
- if( *(uint32_t*)0x102000 == 0xFFFFFFFF && *(uint32_t*)0x102004 == 0xAA995566 )
- DownloadFPGA((char*)0x102000, 10524*4, 1);
-}
+ // make sure that we have enough memory to decompress
+ BigBuf_free(); BigBuf_Clear_ext(false);
-void FpgaGatherVersion(char *dst, int len)
-{
- char *fpga_info;
- unsigned int fpga_info_len;
- dst[0] = 0;
- if(!bitparse_find_section('e', &fpga_info, &fpga_info_len)) {
- strncat(dst, "FPGA image: legacy image without version information", len-1);
- } else {
- strncat(dst, "FPGA image built", len-1);
- /* USB packets only have 48 bytes data payload, so be terse */
-#if 0
- if(bitparse_find_section('a', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
- strncat(dst, " from ", len-1);
- strncat(dst, fpga_info, len-1);
- }
- if(bitparse_find_section('b', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
- strncat(dst, " for ", len-1);
- strncat(dst, fpga_info, len-1);
- }
-#endif
- if(bitparse_find_section('c', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
- strncat(dst, " on ", len-1);
- strncat(dst, fpga_info, len-1);
- }
- if(bitparse_find_section('d', &fpga_info, &fpga_info_len) && fpga_info[fpga_info_len-1] == 0 ) {
- strncat(dst, " at ", len-1);
- strncat(dst, fpga_info, len-1);
- }
+ if (!reset_fpga_stream(bitstream_version, &compressed_fpga_stream, output_buffer)) {
+ return;
+ }
+
+ unsigned int bitstream_length;
+ if (bitparse_find_section(bitstream_version, 'e', &bitstream_length, &compressed_fpga_stream, output_buffer)) {
+ DownloadFPGA(bitstream_version, bitstream_length, &compressed_fpga_stream, output_buffer);
+ downloaded_bitstream = bitstream_version;
}
+
+ inflateEnd(&compressed_fpga_stream);
+
+ // turn off antenna
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
+ // free eventually allocated BigBuf memory
+ BigBuf_free(); BigBuf_Clear_ext(false);
}
+
//-----------------------------------------------------------------------------
// Send a 16 bit command/data pair to the FPGA.
// The bit format is: C3 C2 C1 C0 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
// where C is the 4 bit command and D is the 12 bit data
//-----------------------------------------------------------------------------
-void FpgaSendCommand(uint16_t cmd, uint16_t v)
-{
+void FpgaSendCommand(uint16_t cmd, uint16_t v) {
SetupSpi(SPI_FPGA_MODE);
- while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete
- AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v; // send the data
+ AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v; // write the data to be sent
+ while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0); // wait for the transfer to complete
}
+
//-----------------------------------------------------------------------------
// Write the FPGA setup word (that determines what mode the logic is in, read
// vs. clone vs. etc.). This is now a special case of FpgaSendCommand() to
// avoid changing this function's occurence everywhere in the source code.
//-----------------------------------------------------------------------------
-void FpgaWriteConfWord(uint8_t v)
-{
+void FpgaWriteConfWord(uint16_t v) {
FpgaSendCommand(FPGA_CMD_SET_CONFREG, v);
}
+//-----------------------------------------------------------------------------
+// enable/disable FPGA internal tracing
+//-----------------------------------------------------------------------------
+void FpgaEnableTracing(void) {
+ FpgaSendCommand(FPGA_CMD_TRACE_ENABLE, 1);
+}
+
+void FpgaDisableTracing(void) {
+ FpgaSendCommand(FPGA_CMD_TRACE_ENABLE, 0);
+}
+
//-----------------------------------------------------------------------------
// Set up the CMOS switches that mux the ADC: four switches, independently
// closable, but should only close one at a time. Not an FPGA thing, but
HIGH(whichGpio);
}
+
+void Fpga_print_status(void) {
+ Dbprintf("Currently loaded FPGA image:");
+ Dbprintf(" %s", fpga_version_information[downloaded_bitstream-1]);
+}
+
+int FpgaGetCurrent() {
+ return downloaded_bitstream;
+}
projects / proxmark3-svn / blobdiff