]> git.zerfleddert.de Git - proxmark3-svn/commitdiff
Pushed standard AT91 defines into main code
authord18c7db <d18c7db@ef4ab9da-24cd-11de-8aaa-f3a34680c41f>
Tue, 29 Sep 2009 12:13:41 +0000 (12:13 +0000)
committerd18c7db <d18c7db@ef4ab9da-24cd-11de-8aaa-f3a34680c41f>
Tue, 29 Sep 2009 12:13:41 +0000 (12:13 +0000)
16 files changed:
armsrc/LCD.c
armsrc/LCD.h
armsrc/appmain.c
armsrc/apps.h
armsrc/fpgaloader.c
armsrc/iso14443.c
armsrc/iso14443a.c
armsrc/iso15693.c
armsrc/lfops.c
armsrc/util.c
bootrom/bootrom.c
common/Makefile.common
common/usb.c
include/at91sam7s128.h [deleted file]
include/config_gpio.h
include/proxmark3.h

index 02c2f69624ae405ebc94d26805538c6dceef821b..8e44f7de41d0b34924322bcdb8b6d8c3f06d7a4a 100644 (file)
@@ -5,10 +5,10 @@
 void LCDSend(unsigned int data)\r
 {\r
        // 9th bit set for data, clear for command\r
-       while ((SPI_STATUS & SPI_STATUS_TX_EMPTY) == 0);        // wait for the transfer to complete\r
+       while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0);      // wait for the transfer to complete\r
        // For clarity's sake we pass data with 9th bit clear and commands with 9th\r
        // bit set since they're implemented as defines, se we need to invert bit\r
-       SPI_TX_DATA = data^0x100;                                                       // Send the data/command\r
+       AT91C_BASE_SPI->SPI_TDR = data^0x100;                                                   // Send the data/command\r
 }\r
 \r
 void LCDSetXY(unsigned char x, unsigned char y)\r
@@ -86,10 +86,10 @@ void LCDReset(void)
 {\r
        LED_A_ON();\r
        SetupSpi(SPI_LCD_MODE);\r
-       LCD_RESET_LOW();\r
+       LOW(GPIO_LRST);\r
        SpinDelay(100);\r
 \r
-       LCD_RESET_HIGH();\r
+       HIGH(GPIO_LRST);\r
        SpinDelay(100);\r
        LED_A_OFF();\r
 }\r
index 27971eba4fc91b04e20649272e76f53d4199998a..17b334d190270fbfab602addd8711948a802fde8 100644 (file)
@@ -1,9 +1,6 @@
 #ifndef __LCD\r
 #define __LCD\r
 \r
-#define LCD_RESET_HIGH()       PIO_OUTPUT_DATA_SET   |= (1<<GPIO_LRST)\r
-#define LCD_RESET_LOW()                PIO_OUTPUT_DATA_CLEAR |= (1<<GPIO_LRST)\r
-\r
 // The resolution of the LCD\r
 #define LCD_XRES       132\r
 #define LCD_YRES       132\r
index 23046b4d03b644e618976adfecef0e06fa4c6cea..e2bf403333d02b9dcc413df9414d87115cb644f2 100644 (file)
-//-----------------------------------------------------------------------------
-// The main application code. This is the first thing called after start.c
-// executes.
-// Jonathan Westhues, Mar 2006
-// Edits by Gerhard de Koning Gans, Sep 2007 (##)
-//-----------------------------------------------------------------------------
-
-#include <proxmark3.h>
-#include <stdlib.h>
-#include "apps.h"
-#ifdef WITH_LCD
-#include "fonts.h"
-#include "LCD.h"
-#endif
-
-//=============================================================================
-// A buffer where we can queue things up to be sent through the FPGA, for
-// any purpose (fake tag, as reader, whatever). We go MSB first, since that
-// is the order in which they go out on the wire.
-//=============================================================================
-
-BYTE ToSend[256];
-int ToSendMax;
-static int ToSendBit;
-struct common_area common_area __attribute__((section(".commonarea")));
-
-void BufferClear(void)
-{
-       memset(BigBuf,0,sizeof(BigBuf));
-       DbpString("Buffer cleared");
-}
-
-void ToSendReset(void)
-{
-       ToSendMax = -1;
-       ToSendBit = 8;
-}
-
-void ToSendStuffBit(int b)
-{
-       if(ToSendBit >= 8) {
-               ToSendMax++;
-               ToSend[ToSendMax] = 0;
-               ToSendBit = 0;
-       }
-
-       if(b) {
-               ToSend[ToSendMax] |= (1 << (7 - ToSendBit));
-       }
-
-       ToSendBit++;
-
-       if(ToSendBit >= sizeof(ToSend)) {
-               ToSendBit = 0;
-               DbpString("ToSendStuffBit overflowed!");
-       }
-}
-
-//=============================================================================
-// Debug print functions, to go out over USB, to the usual PC-side client.
-//=============================================================================
-
-void DbpString(char *str)
-{
-       /* this holds up stuff unless we're connected to usb */
-       if (!UsbConnected())
-               return;
-
-       UsbCommand c;
-       c.cmd = CMD_DEBUG_PRINT_STRING;
-       c.ext1 = strlen(str);
-       memcpy(c.d.asBytes, str, c.ext1);
-
-       UsbSendPacket((BYTE *)&c, sizeof(c));
-       // TODO fix USB so stupid things like this aren't req'd
-       SpinDelay(50);
-}
-
-void DbpIntegers(int x1, int x2, int x3)
-{
-       /* this holds up stuff unless we're connected to usb */
-       if (!UsbConnected())
-               return;
-
-       UsbCommand c;
-       c.cmd = CMD_DEBUG_PRINT_INTEGERS;
-       c.ext1 = x1;
-       c.ext2 = x2;
-       c.ext3 = x3;
-
-       UsbSendPacket((BYTE *)&c, sizeof(c));
-       // XXX
-       SpinDelay(50);
-}
-
-//-----------------------------------------------------------------------------
-// Read an ADC channel and block till it completes, then return the result
-// in ADC units (0 to 1023). Also a routine to average 32 samples and
-// return that.
-//-----------------------------------------------------------------------------
-static int ReadAdc(int ch)
-{
-       DWORD d;
-
-       ADC_CONTROL = ADC_CONTROL_RESET;
-       ADC_MODE = ADC_MODE_PRESCALE(32) | ADC_MODE_STARTUP_TIME(16) |
-               ADC_MODE_SAMPLE_HOLD_TIME(8);
-       ADC_CHANNEL_ENABLE = ADC_CHANNEL(ch);
-
-       ADC_CONTROL = ADC_CONTROL_START;
-       while(!(ADC_STATUS & ADC_END_OF_CONVERSION(ch)))
-               ;
-       d = ADC_CHANNEL_DATA(ch);
-
-       return d;
-}
-
-static int AvgAdc(int ch)
-{
-       int i;
-       int a = 0;
-
-       for(i = 0; i < 32; i++) {
-               a += ReadAdc(ch);
-       }
-
-       return (a + 15) >> 5;
-}
-
-void MeasureAntennaTuning(void)
-{
-       BYTE *dest = (BYTE *)BigBuf;
-       int i, ptr = 0, adcval = 0, peak = 0, peakv = 0, peakf = 0;;
-       int vLf125 = 0, vLf134 = 0, vHf = 0;    // in mV
-
-       UsbCommand c;
-
-       DbpString("Measuring antenna characteristics, please wait.");
-       memset(BigBuf,0,sizeof(BigBuf));
-
-/*
- * Sweeps the useful LF range of the proxmark from
- * 46.8kHz (divisor=255) to 600kHz (divisor=19) and
- * read the voltage in the antenna, the result left
- * in the buffer is a graph which should clearly show
- * the resonating frequency of your LF antenna
- * ( hopefully around 95 if it is tuned to 125kHz!)
- */
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-       for (i=255; i>19; i--) {
-               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);
-               SpinDelay(20);
-               // Vref = 3.3V, and a 10000:240 voltage divider on the input
-               // can measure voltages up to 137500 mV
-               adcval = ((137500 * AvgAdc(ADC_CHAN_LF)) >> 10);
-               if (i==95)      vLf125 = adcval; // voltage at 125Khz
-               if (i==89)      vLf134 = adcval; // voltage at 134Khz
-
-               dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes
-               if(dest[i] > peak) {
-                       peakv = adcval;
-                       peak = dest[i];
-                       peakf = i;
-                       ptr = i;
-               }
-       }
-
-       // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
-       SpinDelay(20);
-       // Vref = 3300mV, and an 10:1 voltage divider on the input
-       // can measure voltages up to 33000 mV
-       vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;
-
-       c.cmd = CMD_MEASURED_ANTENNA_TUNING;
-       c.ext1 = (vLf125 << 0) | (vLf134 << 16);
-       c.ext2 = vHf;
-       c.ext3 = peakf | (peakv << 16);
-       UsbSendPacket((BYTE *)&c, sizeof(c));
-}
-
-void SimulateTagHfListen(void)
-{
-       BYTE *dest = (BYTE *)BigBuf;
-       int n = sizeof(BigBuf);
-       BYTE v = 0;
-       int i;
-       int p = 0;
-
-       // We're using this mode just so that I can test it out; the simulated
-       // tag mode would work just as well and be simpler.
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
-
-       // We need to listen to the high-frequency, peak-detected path.
-       SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
-       FpgaSetupSsc();
-
-       i = 0;
-       for(;;) {
-               if(SSC_STATUS & (SSC_STATUS_TX_READY)) {
-                       SSC_TRANSMIT_HOLDING = 0xff;
-               }
-               if(SSC_STATUS & (SSC_STATUS_RX_READY)) {
-                       BYTE r = (BYTE)SSC_RECEIVE_HOLDING;
-
-                       v <<= 1;
-                       if(r & 1) {
-                               v |= 1;
-                       }
-                       p++;
-
-                       if(p >= 8) {
-                               dest[i] = v;
-                               v = 0;
-                               p = 0;
-                               i++;
-
-                               if(i >= n) {
-                                       break;
-                               }
-                       }
-               }
-       }
-       DbpString("simulate tag (now type bitsamples)");
-}
-
-void ReadMem(int addr)
-{
-       const DWORD *data = ((DWORD *)addr);
-       int i;
-
-       DbpString("Reading memory at address");
-       DbpIntegers(0, 0, addr);
-       for (i = 0; i < 8; i+= 2)
-               DbpIntegers(0, data[i], data[i+1]);
-}
-
-/* osimage version information is linked in */
-extern struct version_information version_information;
-/* bootrom version information is pointed to from _bootphase1_version_pointer */
-extern char *_bootphase1_version_pointer, _flash_start, _flash_end;
-void SendVersion(void)
-{
-       char temp[48]; /* Limited data payload in USB packets */
-       DbpString("Prox/RFID mark3 RFID instrument");
-       
-       /* Try to find the bootrom version information. Expect to find a pointer at 
-        * symbol _bootphase1_version_pointer, perform slight sanity checks on the
-        * pointer, then use it.
-        */
-       char *bootrom_version = *(char**)&_bootphase1_version_pointer;
-       if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {
-               DbpString("bootrom version information appears invalid");
-       } else {
-               FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);
-               DbpString(temp);
-       }
-       
-       FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);
-       DbpString(temp);
-       
-       FpgaGatherVersion(temp, sizeof(temp));
-       DbpString(temp);
-}
-
-// samy's sniff and repeat routine
-void SamyRun()
-{
-       DbpString("Stand-alone mode! No PC necessary.");
-
-       // 3 possible options? no just 2 for now
-#define OPTS 2
-
-       int high[OPTS], low[OPTS];
-
-       // Oooh pretty -- notify user we're in elite samy mode now
-       LED(LED_RED,    200);
-       LED(LED_ORANGE, 200);
-       LED(LED_GREEN,  200);
-       LED(LED_ORANGE, 200);
-       LED(LED_RED,    200);
-       LED(LED_ORANGE, 200);
-       LED(LED_GREEN,  200);
-       LED(LED_ORANGE, 200);
-       LED(LED_RED,    200);
-
-       int selected = 0;
-       int playing = 0;
-
-       // Turn on selected LED
-       LED(selected + 1, 0);
-
-       for (;;)
-       {
-               UsbPoll(FALSE);
-               WDT_HIT();
-
-               // Was our button held down or pressed?
-               int button_pressed = BUTTON_HELD(1000);
-               SpinDelay(300);
-
-               // Button was held for a second, begin recording
-               if (button_pressed > 0)
-               {
-                       LEDsoff();
-                       LED(selected + 1, 0);
-                       LED(LED_RED2, 0);
-
-                       // record
-                       DbpString("Starting recording");
-
-                       // wait for button to be released
-                       while(BUTTON_PRESS())
-                               WDT_HIT();
-
-                       /* need this delay to prevent catching some weird data */
-                       SpinDelay(500);
-
-                       CmdHIDdemodFSK(1, &high[selected], &low[selected], 0);
-                       DbpString("Recorded");
-                       DbpIntegers(selected, high[selected], low[selected]);
-
-                       LEDsoff();
-                       LED(selected + 1, 0);
-                       // Finished recording
-
-                       // If we were previously playing, set playing off
-                       // so next button push begins playing what we recorded
-                       playing = 0;
-               }
-
-               // Change where to record (or begin playing)
-               else if (button_pressed)
-               {
-                       // Next option if we were previously playing
-                       if (playing)
-                               selected = (selected + 1) % OPTS;
-                       playing = !playing;
-
-                       LEDsoff();
-                       LED(selected + 1, 0);
-
-                       // Begin transmitting
-                       if (playing)
-                       {
-                               LED(LED_GREEN, 0);
-                               DbpString("Playing");
-                               // wait for button to be released
-                               while(BUTTON_PRESS())
-                                       WDT_HIT();
-                               DbpIntegers(selected, high[selected], low[selected]);
-                               CmdHIDsimTAG(high[selected], low[selected], 0);
-                               DbpString("Done playing");
-                               if (BUTTON_HELD(1000) > 0)
-                                       {
-                                       DbpString("Exiting");
-                                       LEDsoff();
-                                       return;
-                                       }
-
-                               /* We pressed a button so ignore it here with a delay */
-                               SpinDelay(300);
-
-                               // when done, we're done playing, move to next option
-                               selected = (selected + 1) % OPTS;
-                               playing = !playing;
-                               LEDsoff();
-                               LED(selected + 1, 0);
-                       }
-                       else
-                               while(BUTTON_PRESS())
-                                       WDT_HIT();
-               }
-       }
-}
-
-
-/*
-OBJECTIVE
-Listen and detect an external reader. Determine the best location
-for the antenna.
-
-INSTRUCTIONS:
-Inside the ListenReaderField() function, there is two mode.
-By default, when you call the function, you will enter mode 1.
-If you press the PM3 button one time, you will enter mode 2.
-If you press the PM3 button a second time, you will exit the function.
-
-DESCRIPTION OF MODE 1:
-This mode just listens for an external reader field and lights up green
-for HF and/or red for LF. This is the original mode of the detectreader
-function.
-
-DESCRIPTION OF MODE 2:
-This mode will visually represent, using the LEDs, the actual strength of the
-current compared to the maximum current detected. Basically, once you know
-what kind of external reader is present, it will help you spot the best location to place
-your antenna. You will probably not get some good results if there is a LF and a HF reader
-at the same place! :-)
-
-LIGHT SCHEME USED:
-*/
-static const char LIGHT_SCHEME[] = {
-               0x0, /* ----     | No field detected */
-               0x1, /* X---     | 14% of maximum current detected */
-               0x2, /* -X--     | 29% of maximum current detected */
-               0x4, /* --X-     | 43% of maximum current detected */
-               0x8, /* ---X     | 57% of maximum current detected */
-               0xC, /* --XX     | 71% of maximum current detected */
-               0xE, /* -XXX     | 86% of maximum current detected */
-               0xF, /* XXXX     | 100% of maximum current detected */
-};
-static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);
-
-void ListenReaderField(int limit)
-{
-       int lf_av, lf_av_new, lf_baseline= 0, lf_count= 0, lf_max;
-       int hf_av, hf_av_new,  hf_baseline= 0, hf_count= 0, hf_max;
-       int mode=1, display_val, display_max, i;
-
-#define LF_ONLY                1
-#define HF_ONLY                2
-
-       LEDsoff();
-
-       lf_av=lf_max=ReadAdc(ADC_CHAN_LF);
-
-       if(limit != HF_ONLY) {
-               DbpString("LF 125/134 Baseline:");
-               DbpIntegers(lf_av,0,0);
-               lf_baseline= lf_av;
-       }
-
-       hf_av=hf_max=ReadAdc(ADC_CHAN_HF);
-
-       if (limit != LF_ONLY) {
-               DbpString("HF 13.56 Baseline:");
-               DbpIntegers(hf_av,0,0);
-               hf_baseline= hf_av;
-       }
-
-       for(;;) {
-               if (BUTTON_PRESS()) {
-                       SpinDelay(500);
-                       switch (mode) {
-                               case 1:
-                                       mode=2;
-                                       DbpString("Signal Strength Mode");
-                                       break;
-                               case 2:
-                               default:
-                                       DbpString("Stopped");
-                                       LEDsoff();
-                                       return;
-                                       break;
-                       }
-               }
-               WDT_HIT();
-
-               if (limit != HF_ONLY) {
-                       if(mode==1) {
-                               if (abs(lf_av - lf_baseline) > 10) LED_D_ON();
-                               else                               LED_D_OFF();
-                       }
-                       
-                       ++lf_count;
-                       lf_av_new= ReadAdc(ADC_CHAN_LF);
-                       // see if there's a significant change
-                       if(abs(lf_av - lf_av_new) > 10) {
-                               DbpString("LF 125/134 Field Change:");
-                               DbpIntegers(lf_av,lf_av_new,lf_count);
-                               lf_av= lf_av_new;
-                               if (lf_av > lf_max)
-                                       lf_max = lf_av;
-                               lf_count= 0;
-                       }
-               }
-
-               if (limit != LF_ONLY) {
-                       if (mode == 1){
-                               if (abs(hf_av - hf_baseline) > 10) LED_B_ON();
-                               else                               LED_B_OFF();
-                       }
-                       
-                       ++hf_count;
-                       hf_av_new= ReadAdc(ADC_CHAN_HF);
-                       // see if there's a significant change
-                       if(abs(hf_av - hf_av_new) > 10) {
-                               DbpString("HF 13.56 Field Change:");
-                               DbpIntegers(hf_av,hf_av_new,hf_count);
-                               hf_av= hf_av_new;
-                               if (hf_av > hf_max)
-                                       hf_max = hf_av;
-                               hf_count= 0;
-                       }
-               }
-               
-               if(mode == 2) {
-                       if (limit == LF_ONLY) {
-                               display_val = lf_av;
-                               display_max = lf_max;
-                       } else if (limit == HF_ONLY) {
-                               display_val = hf_av;
-                               display_max = hf_max;
-                       } else { /* Pick one at random */
-                               if( (hf_max - hf_baseline) > (lf_max - lf_baseline) ) {
-                                       display_val = hf_av;
-                                       display_max = hf_max;
-                               } else {
-                                       display_val = lf_av;
-                                       display_max = lf_max;
-                               }
-                       }
-                       for (i=0; i<LIGHT_LEN; i++) {
-                               if (display_val >= ((display_max/LIGHT_LEN)*i) && display_val <= ((display_max/LIGHT_LEN)*(i+1))) {
-                                       if (LIGHT_SCHEME[i] & 0x1) LED_C_ON(); else LED_C_OFF();
-                                       if (LIGHT_SCHEME[i] & 0x2) LED_A_ON(); else LED_A_OFF();
-                                       if (LIGHT_SCHEME[i] & 0x4) LED_B_ON(); else LED_B_OFF();
-                                       if (LIGHT_SCHEME[i] & 0x8) LED_D_ON(); else LED_D_OFF();
-                                       break;
-                               }
-                       }
-               }
-       }
-}
-
-void UsbPacketReceived(BYTE *packet, int len)
-{
-       UsbCommand *c = (UsbCommand *)packet;
-
-       switch(c->cmd) {
-               case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
-                       AcquireRawAdcSamples125k(c->ext1);
-                       break;
-
-               case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
-                       ModThenAcquireRawAdcSamples125k(c->ext1,c->ext2,c->ext3,c->d.asBytes);
-                       break;
-
-               case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
-                       AcquireRawAdcSamplesIso15693();
-                       break;
-
-               case CMD_BUFF_CLEAR:
-                       BufferClear();
-                       break;
-
-               case CMD_READER_ISO_15693:
-                       ReaderIso15693(c->ext1);
-                       break;
-
-               case CMD_SIMTAG_ISO_15693:
-                       SimTagIso15693(c->ext1);
-                       break;
-
-               case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443:
-                       AcquireRawAdcSamplesIso14443(c->ext1);
-                       break;
-
-               case CMD_READ_SRI512_TAG:
-                       ReadSRI512Iso14443(c->ext1);
-                       break;
-
-               case CMD_READER_ISO_14443a:
-                       ReaderIso14443a(c->ext1);
-                       break;
-
-               case CMD_SNOOP_ISO_14443:
-                       SnoopIso14443();
-                       break;
-
-               case CMD_SNOOP_ISO_14443a:
-                       SnoopIso14443a();
-                       break;
-
-               case CMD_SIMULATE_TAG_HF_LISTEN:
-                       SimulateTagHfListen();
-                       break;
-
-               case CMD_SIMULATE_TAG_ISO_14443:
-                       SimulateIso14443Tag();
-                       break;
-
-               case CMD_SIMULATE_TAG_ISO_14443a:
-                       SimulateIso14443aTag(c->ext1, c->ext2);  // ## Simulate iso14443a tag - pass tag type & UID
-                       break;
-
-               case CMD_MEASURE_ANTENNA_TUNING:
-                       MeasureAntennaTuning();
-                       break;
-
-               case CMD_LISTEN_READER_FIELD:
-                       ListenReaderField(c->ext1);
-                       break;
-
-               case CMD_HID_DEMOD_FSK:
-                       CmdHIDdemodFSK(0, 0, 0, 1);                             // Demodulate HID tag
-                       break;
-
-               case CMD_HID_SIM_TAG:
-                       CmdHIDsimTAG(c->ext1, c->ext2, 1);                                      // Simulate HID tag by ID
-                       break;
-
-               case CMD_FPGA_MAJOR_MODE_OFF:           // ## FPGA Control
-                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-                       SpinDelay(200);
-                       LED_D_OFF(); // LED D indicates field ON or OFF
-                       break;
-
-               case CMD_READ_TI_TYPE:
-                       ReadTItag();
-                       break;
-
-               case CMD_WRITE_TI_TYPE:
-                       WriteTItag(c->ext1,c->ext2,c->ext3);
-                       break;
-
-               case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: {
-                       UsbCommand n;
-                       if(c->cmd == CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K) {
-                               n.cmd = CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K;
-                       } else {
-                               n.cmd = CMD_DOWNLOADED_RAW_BITS_TI_TYPE;
-                       }
-                       n.ext1 = c->ext1;
-                       memcpy(n.d.asDwords, BigBuf+c->ext1, 12*sizeof(DWORD));
-                       UsbSendPacket((BYTE *)&n, sizeof(n));
-                       break;
-               }
-               case CMD_DOWNLOADED_SIM_SAMPLES_125K: {
-                       BYTE *b = (BYTE *)BigBuf;
-                       memcpy(b+c->ext1, c->d.asBytes, 48);
-                       break;
-               }
-               case CMD_SIMULATE_TAG_125K:
-                       LED_A_ON();
-                       SimulateTagLowFrequency(c->ext1, 1);
-                       LED_A_OFF();
-                       break;
-               case CMD_READ_MEM:
-                       ReadMem(c->ext1);
-                       break;
-               case CMD_SET_LF_DIVISOR:
-                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->ext1);
-                       break;
-               case CMD_VERSION:
-                       SendVersion();
-                       break;
-               case CMD_LF_SIMULATE_BIDIR:
-                       SimulateTagLowFrequencyBidir(c->ext1, c->ext2);
-                       break;
-#ifdef WITH_LCD
-               case CMD_LCD_RESET:
-                       LCDReset();
-                       break;
-               case CMD_LCD:
-                       LCDSend(c->ext1);
-                       break;
-#endif
-               case CMD_SETUP_WRITE:
-               case CMD_FINISH_WRITE:
-               case CMD_HARDWARE_RESET:
-                       USB_D_PLUS_PULLUP_OFF();
-                       SpinDelay(1000);
-                       SpinDelay(1000);
-                       RSTC_CONTROL = RST_CONTROL_KEY | RST_CONTROL_PROCESSOR_RESET;
-                       for(;;) {
-                               // We're going to reset, and the bootrom will take control.
-                       }
-                       break;
-               case CMD_START_FLASH:
-                       if(common_area.flags.bootrom_present) {
-                               common_area.command = COMMON_AREA_COMMAND_ENTER_FLASH_MODE;
-                       }
-                       USB_D_PLUS_PULLUP_OFF();
-                       RSTC_CONTROL = RST_CONTROL_KEY | RST_CONTROL_PROCESSOR_RESET;
-                       for(;;);
-                       break;
-                       
-               case CMD_DEVICE_INFO: {
-                       UsbCommand c;
-                       c.cmd = CMD_DEVICE_INFO;
-                       c.ext1 = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;
-                       if(common_area.flags.bootrom_present) c.ext1 |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;
-                       UsbSendPacket((BYTE*)&c, sizeof(c));
-               }
-                       break;
-               default:
-                       DbpString("unknown command");
-                       break;
-       }
-}
-
-void  __attribute__((noreturn)) AppMain(void)
-{
-       SpinDelay(100);
-       
-       if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {
-               /* Initialize common area */
-               memset(&common_area, 0, sizeof(common_area));
-               common_area.magic = COMMON_AREA_MAGIC;
-               common_area.version = 1;
-       }
-       common_area.flags.osimage_present = 1;
-
-       LED_D_OFF();
-       LED_C_OFF();
-       LED_B_OFF();
-       LED_A_OFF();
-
-       UsbStart();
-
-       // The FPGA gets its clock from us from PCK0 output, so set that up.
-       PIO_PERIPHERAL_B_SEL = (1 << GPIO_PCK0);
-       PIO_DISABLE = (1 << GPIO_PCK0);
-       PMC_SYS_CLK_ENABLE = PMC_SYS_CLK_PROGRAMMABLE_CLK_0;
-       // PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz
-       PMC_PROGRAMMABLE_CLK_0 = PMC_CLK_SELECTION_PLL_CLOCK |
-               PMC_CLK_PRESCALE_DIV_4;
-       PIO_OUTPUT_ENABLE = (1 << GPIO_PCK0);
-
-       // Reset SPI
-       SPI_CONTROL = SPI_CONTROL_RESET;
-       // Reset SSC
-       SSC_CONTROL = SSC_CONTROL_RESET;
-
-       // Load the FPGA image, which we have stored in our flash.
-       FpgaDownloadAndGo();
-
-#ifdef WITH_LCD
-
-       LCDInit();
-
-       // test text on different colored backgrounds
-       LCDString(" The quick brown fox  ",     (char *)&FONT6x8,1,1+8*0,WHITE  ,BLACK );
-       LCDString("  jumped over the     ",     (char *)&FONT6x8,1,1+8*1,BLACK  ,WHITE );
-       LCDString("     lazy dog.        ",     (char *)&FONT6x8,1,1+8*2,YELLOW ,RED   );
-       LCDString(" AaBbCcDdEeFfGgHhIiJj ",     (char *)&FONT6x8,1,1+8*3,RED    ,GREEN );
-       LCDString(" KkLlMmNnOoPpQqRrSsTt ",     (char *)&FONT6x8,1,1+8*4,MAGENTA,BLUE  );
-       LCDString("UuVvWwXxYyZz0123456789",     (char *)&FONT6x8,1,1+8*5,BLUE   ,YELLOW);
-       LCDString("`-=[]_;',./~!@#$%^&*()",     (char *)&FONT6x8,1,1+8*6,BLACK  ,CYAN  );
-       LCDString("     _+{}|:\\\"<>?     ",(char *)&FONT6x8,1,1+8*7,BLUE  ,MAGENTA);
-
-       // color bands
-       LCDFill(0, 1+8* 8, 132, 8, BLACK);
-       LCDFill(0, 1+8* 9, 132, 8, WHITE);
-       LCDFill(0, 1+8*10, 132, 8, RED);
-       LCDFill(0, 1+8*11, 132, 8, GREEN);
-       LCDFill(0, 1+8*12, 132, 8, BLUE);
-       LCDFill(0, 1+8*13, 132, 8, YELLOW);
-       LCDFill(0, 1+8*14, 132, 8, CYAN);
-       LCDFill(0, 1+8*15, 132, 8, MAGENTA);
-
-#endif
-
-       for(;;) {
-               UsbPoll(FALSE);
-               WDT_HIT();
-
-               if (BUTTON_HELD(1000) > 0)
-                       SamyRun();
-       }
-}
+//-----------------------------------------------------------------------------\r
+// The main application code. This is the first thing called after start.c\r
+// executes.\r
+// Jonathan Westhues, Mar 2006\r
+// Edits by Gerhard de Koning Gans, Sep 2007 (##)\r
+//-----------------------------------------------------------------------------\r
+\r
+#include <proxmark3.h>\r
+#include <stdlib.h>\r
+#include "apps.h"\r
+#ifdef WITH_LCD\r
+#include "fonts.h"\r
+#include "LCD.h"\r
+#endif\r
+\r
+//=============================================================================\r
+// A buffer where we can queue things up to be sent through the FPGA, for\r
+// any purpose (fake tag, as reader, whatever). We go MSB first, since that\r
+// is the order in which they go out on the wire.\r
+//=============================================================================\r
+\r
+BYTE ToSend[256];\r
+int ToSendMax;\r
+static int ToSendBit;\r
+struct common_area common_area __attribute__((section(".commonarea")));\r
+\r
+void BufferClear(void)\r
+{\r
+       memset(BigBuf,0,sizeof(BigBuf));\r
+       DbpString("Buffer cleared");\r
+}\r
+\r
+void ToSendReset(void)\r
+{\r
+       ToSendMax = -1;\r
+       ToSendBit = 8;\r
+}\r
+\r
+void ToSendStuffBit(int b)\r
+{\r
+       if(ToSendBit >= 8) {\r
+               ToSendMax++;\r
+               ToSend[ToSendMax] = 0;\r
+               ToSendBit = 0;\r
+       }\r
+\r
+       if(b) {\r
+               ToSend[ToSendMax] |= (1 << (7 - ToSendBit));\r
+       }\r
+\r
+       ToSendBit++;\r
+\r
+       if(ToSendBit >= sizeof(ToSend)) {\r
+               ToSendBit = 0;\r
+               DbpString("ToSendStuffBit overflowed!");\r
+       }\r
+}\r
+\r
+//=============================================================================\r
+// Debug print functions, to go out over USB, to the usual PC-side client.\r
+//=============================================================================\r
+\r
+void DbpString(char *str)\r
+{\r
+       /* this holds up stuff unless we're connected to usb */\r
+       if (!UsbConnected())\r
+               return;\r
+\r
+       UsbCommand c;\r
+       c.cmd = CMD_DEBUG_PRINT_STRING;\r
+       c.ext1 = strlen(str);\r
+       memcpy(c.d.asBytes, str, c.ext1);\r
+\r
+       UsbSendPacket((BYTE *)&c, sizeof(c));\r
+       // TODO fix USB so stupid things like this aren't req'd\r
+       SpinDelay(50);\r
+}\r
+\r
+void DbpIntegers(int x1, int x2, int x3)\r
+{\r
+       /* this holds up stuff unless we're connected to usb */\r
+       if (!UsbConnected())\r
+               return;\r
+\r
+       UsbCommand c;\r
+       c.cmd = CMD_DEBUG_PRINT_INTEGERS;\r
+       c.ext1 = x1;\r
+       c.ext2 = x2;\r
+       c.ext3 = x3;\r
+\r
+       UsbSendPacket((BYTE *)&c, sizeof(c));\r
+       // XXX\r
+       SpinDelay(50);\r
+}\r
+\r
+//-----------------------------------------------------------------------------\r
+// Read an ADC channel and block till it completes, then return the result\r
+// in ADC units (0 to 1023). Also a routine to average 32 samples and\r
+// return that.\r
+//-----------------------------------------------------------------------------\r
+static int ReadAdc(int ch)\r
+{\r
+       DWORD d;\r
+\r
+       AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;\r
+       AT91C_BASE_ADC->ADC_MR =\r
+               ADC_MODE_PRESCALE(32) |\r
+               ADC_MODE_STARTUP_TIME(16) |\r
+               ADC_MODE_SAMPLE_HOLD_TIME(8);\r
+       AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ch);\r
+\r
+       AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;\r
+       while(!(AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ch)))\r
+               ;\r
+       d = AT91C_BASE_ADC->ADC_CDR[ch];\r
+\r
+       return d;\r
+}\r
+\r
+static int AvgAdc(int ch)\r
+{\r
+       int i;\r
+       int a = 0;\r
+\r
+       for(i = 0; i < 32; i++) {\r
+               a += ReadAdc(ch);\r
+       }\r
+\r
+       return (a + 15) >> 5;\r
+}\r
+\r
+void MeasureAntennaTuning(void)\r
+{\r
+       BYTE *dest = (BYTE *)BigBuf;\r
+       int i, ptr = 0, adcval = 0, peak = 0, peakv = 0, peakf = 0;;\r
+       int vLf125 = 0, vLf134 = 0, vHf = 0;    // in mV\r
+\r
+       UsbCommand c;\r
+\r
+       DbpString("Measuring antenna characteristics, please wait.");\r
+       memset(BigBuf,0,sizeof(BigBuf));\r
+\r
+/*\r
+ * Sweeps the useful LF range of the proxmark from\r
+ * 46.8kHz (divisor=255) to 600kHz (divisor=19) and\r
+ * read the voltage in the antenna, the result left\r
+ * in the buffer is a graph which should clearly show\r
+ * the resonating frequency of your LF antenna\r
+ * ( hopefully around 95 if it is tuned to 125kHz!)\r
+ */\r
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);\r
+       for (i=255; i>19; i--) {\r
+               FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i);\r
+               SpinDelay(20);\r
+               // Vref = 3.3V, and a 10000:240 voltage divider on the input\r
+               // can measure voltages up to 137500 mV\r
+               adcval = ((137500 * AvgAdc(ADC_CHAN_LF)) >> 10);\r
+               if (i==95)      vLf125 = adcval; // voltage at 125Khz\r
+               if (i==89)      vLf134 = adcval; // voltage at 134Khz\r
+\r
+               dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes\r
+               if(dest[i] > peak) {\r
+                       peakv = adcval;\r
+                       peak = dest[i];\r
+                       peakf = i;\r
+                       ptr = i;\r
+               }\r
+       }\r
+\r
+       // Let the FPGA drive the high-frequency antenna around 13.56 MHz.\r
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);\r
+       SpinDelay(20);\r
+       // Vref = 3300mV, and an 10:1 voltage divider on the input\r
+       // can measure voltages up to 33000 mV\r
+       vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10;\r
+\r
+       c.cmd = CMD_MEASURED_ANTENNA_TUNING;\r
+       c.ext1 = (vLf125 << 0) | (vLf134 << 16);\r
+       c.ext2 = vHf;\r
+       c.ext3 = peakf | (peakv << 16);\r
+       UsbSendPacket((BYTE *)&c, sizeof(c));\r
+}\r
+\r
+void SimulateTagHfListen(void)\r
+{\r
+       BYTE *dest = (BYTE *)BigBuf;\r
+       int n = sizeof(BigBuf);\r
+       BYTE v = 0;\r
+       int i;\r
+       int p = 0;\r
+\r
+       // We're using this mode just so that I can test it out; the simulated\r
+       // tag mode would work just as well and be simpler.\r
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);\r
+\r
+       // We need to listen to the high-frequency, peak-detected path.\r
+       SetAdcMuxFor(GPIO_MUXSEL_HIPKD);\r
+\r
+       FpgaSetupSsc();\r
+\r
+       i = 0;\r
+       for(;;) {\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                       AT91C_BASE_SSC->SSC_THR = 0xff;\r
+               }\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+                       BYTE r = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
+\r
+                       v <<= 1;\r
+                       if(r & 1) {\r
+                               v |= 1;\r
+                       }\r
+                       p++;\r
+\r
+                       if(p >= 8) {\r
+                               dest[i] = v;\r
+                               v = 0;\r
+                               p = 0;\r
+                               i++;\r
+\r
+                               if(i >= n) {\r
+                                       break;\r
+                               }\r
+                       }\r
+               }\r
+       }\r
+       DbpString("simulate tag (now type bitsamples)");\r
+}\r
+\r
+void ReadMem(int addr)\r
+{\r
+       const DWORD *data = ((DWORD *)addr);\r
+       int i;\r
+\r
+       DbpString("Reading memory at address");\r
+       DbpIntegers(0, 0, addr);\r
+       for (i = 0; i < 8; i+= 2)\r
+               DbpIntegers(0, data[i], data[i+1]);\r
+}\r
+\r
+/* osimage version information is linked in */\r
+extern struct version_information version_information;\r
+/* bootrom version information is pointed to from _bootphase1_version_pointer */\r
+extern char *_bootphase1_version_pointer, _flash_start, _flash_end;\r
+void SendVersion(void)\r
+{\r
+       char temp[48]; /* Limited data payload in USB packets */\r
+       DbpString("Prox/RFID mark3 RFID instrument");\r
+       \r
+       /* Try to find the bootrom version information. Expect to find a pointer at \r
+        * symbol _bootphase1_version_pointer, perform slight sanity checks on the\r
+        * pointer, then use it.\r
+        */\r
+       char *bootrom_version = *(char**)&_bootphase1_version_pointer;\r
+       if( bootrom_version < &_flash_start || bootrom_version >= &_flash_end ) {\r
+               DbpString("bootrom version information appears invalid");\r
+       } else {\r
+               FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version);\r
+               DbpString(temp);\r
+       }\r
+       \r
+       FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information);\r
+       DbpString(temp);\r
+       \r
+       FpgaGatherVersion(temp, sizeof(temp));\r
+       DbpString(temp);\r
+}\r
+\r
+// samy's sniff and repeat routine\r
+void SamyRun()\r
+{\r
+       DbpString("Stand-alone mode! No PC necessary.");\r
+\r
+       // 3 possible options? no just 2 for now\r
+#define OPTS 2\r
+\r
+       int high[OPTS], low[OPTS];\r
+\r
+       // Oooh pretty -- notify user we're in elite samy mode now\r
+       LED(LED_RED,    200);\r
+       LED(LED_ORANGE, 200);\r
+       LED(LED_GREEN,  200);\r
+       LED(LED_ORANGE, 200);\r
+       LED(LED_RED,    200);\r
+       LED(LED_ORANGE, 200);\r
+       LED(LED_GREEN,  200);\r
+       LED(LED_ORANGE, 200);\r
+       LED(LED_RED,    200);\r
+\r
+       int selected = 0;\r
+       int playing = 0;\r
+\r
+       // Turn on selected LED\r
+       LED(selected + 1, 0);\r
+\r
+       for (;;)\r
+       {\r
+               UsbPoll(FALSE);\r
+               WDT_HIT();\r
+\r
+               // Was our button held down or pressed?\r
+               int button_pressed = BUTTON_HELD(1000);\r
+               SpinDelay(300);\r
+\r
+               // Button was held for a second, begin recording\r
+               if (button_pressed > 0)\r
+               {\r
+                       LEDsoff();\r
+                       LED(selected + 1, 0);\r
+                       LED(LED_RED2, 0);\r
+\r
+                       // record\r
+                       DbpString("Starting recording");\r
+\r
+                       // wait for button to be released\r
+                       while(BUTTON_PRESS())\r
+                               WDT_HIT();\r
+\r
+                       /* need this delay to prevent catching some weird data */\r
+                       SpinDelay(500);\r
+\r
+                       CmdHIDdemodFSK(1, &high[selected], &low[selected], 0);\r
+                       DbpString("Recorded");\r
+                       DbpIntegers(selected, high[selected], low[selected]);\r
+\r
+                       LEDsoff();\r
+                       LED(selected + 1, 0);\r
+                       // Finished recording\r
+\r
+                       // If we were previously playing, set playing off\r
+                       // so next button push begins playing what we recorded\r
+                       playing = 0;\r
+               }\r
+\r
+               // Change where to record (or begin playing)\r
+               else if (button_pressed)\r
+               {\r
+                       // Next option if we were previously playing\r
+                       if (playing)\r
+                               selected = (selected + 1) % OPTS;\r
+                       playing = !playing;\r
+\r
+                       LEDsoff();\r
+                       LED(selected + 1, 0);\r
+\r
+                       // Begin transmitting\r
+                       if (playing)\r
+                       {\r
+                               LED(LED_GREEN, 0);\r
+                               DbpString("Playing");\r
+                               // wait for button to be released\r
+                               while(BUTTON_PRESS())\r
+                                       WDT_HIT();\r
+                               DbpIntegers(selected, high[selected], low[selected]);\r
+                               CmdHIDsimTAG(high[selected], low[selected], 0);\r
+                               DbpString("Done playing");\r
+                               if (BUTTON_HELD(1000) > 0)\r
+                                       {\r
+                                       DbpString("Exiting");\r
+                                       LEDsoff();\r
+                                       return;\r
+                                       }\r
+\r
+                               /* We pressed a button so ignore it here with a delay */\r
+                               SpinDelay(300);\r
+\r
+                               // when done, we're done playing, move to next option\r
+                               selected = (selected + 1) % OPTS;\r
+                               playing = !playing;\r
+                               LEDsoff();\r
+                               LED(selected + 1, 0);\r
+                       }\r
+                       else\r
+                               while(BUTTON_PRESS())\r
+                                       WDT_HIT();\r
+               }\r
+       }\r
+}\r
+\r
+\r
+/*\r
+OBJECTIVE\r
+Listen and detect an external reader. Determine the best location\r
+for the antenna.\r
+\r
+INSTRUCTIONS:\r
+Inside the ListenReaderField() function, there is two mode.\r
+By default, when you call the function, you will enter mode 1.\r
+If you press the PM3 button one time, you will enter mode 2.\r
+If you press the PM3 button a second time, you will exit the function.\r
+\r
+DESCRIPTION OF MODE 1:\r
+This mode just listens for an external reader field and lights up green\r
+for HF and/or red for LF. This is the original mode of the detectreader\r
+function.\r
+\r
+DESCRIPTION OF MODE 2:\r
+This mode will visually represent, using the LEDs, the actual strength of the\r
+current compared to the maximum current detected. Basically, once you know\r
+what kind of external reader is present, it will help you spot the best location to place\r
+your antenna. You will probably not get some good results if there is a LF and a HF reader\r
+at the same place! :-)\r
+\r
+LIGHT SCHEME USED:\r
+*/\r
+static const char LIGHT_SCHEME[] = {\r
+               0x0, /* ----     | No field detected */\r
+               0x1, /* X---     | 14% of maximum current detected */\r
+               0x2, /* -X--     | 29% of maximum current detected */\r
+               0x4, /* --X-     | 43% of maximum current detected */\r
+               0x8, /* ---X     | 57% of maximum current detected */\r
+               0xC, /* --XX     | 71% of maximum current detected */\r
+               0xE, /* -XXX     | 86% of maximum current detected */\r
+               0xF, /* XXXX     | 100% of maximum current detected */\r
+};\r
+static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]);\r
+\r
+void ListenReaderField(int limit)\r
+{\r
+       int lf_av, lf_av_new, lf_baseline= 0, lf_count= 0, lf_max;\r
+       int hf_av, hf_av_new,  hf_baseline= 0, hf_count= 0, hf_max;\r
+       int mode=1, display_val, display_max, i;\r
+\r
+#define LF_ONLY                1\r
+#define HF_ONLY                2\r
+\r
+       LEDsoff();\r
+\r
+       lf_av=lf_max=ReadAdc(ADC_CHAN_LF);\r
+\r
+       if(limit != HF_ONLY) {\r
+               DbpString("LF 125/134 Baseline:");\r
+               DbpIntegers(lf_av,0,0);\r
+               lf_baseline= lf_av;\r
+       }\r
+\r
+       hf_av=hf_max=ReadAdc(ADC_CHAN_HF);\r
+\r
+       if (limit != LF_ONLY) {\r
+               DbpString("HF 13.56 Baseline:");\r
+               DbpIntegers(hf_av,0,0);\r
+               hf_baseline= hf_av;\r
+       }\r
+\r
+       for(;;) {\r
+               if (BUTTON_PRESS()) {\r
+                       SpinDelay(500);\r
+                       switch (mode) {\r
+                               case 1:\r
+                                       mode=2;\r
+                                       DbpString("Signal Strength Mode");\r
+                                       break;\r
+                               case 2:\r
+                               default:\r
+                                       DbpString("Stopped");\r
+                                       LEDsoff();\r
+                                       return;\r
+                                       break;\r
+                       }\r
+               }\r
+               WDT_HIT();\r
+\r
+               if (limit != HF_ONLY) {\r
+                       if(mode==1) {\r
+                               if (abs(lf_av - lf_baseline) > 10) LED_D_ON();\r
+                               else                               LED_D_OFF();\r
+                       }\r
+                       \r
+                       ++lf_count;\r
+                       lf_av_new= ReadAdc(ADC_CHAN_LF);\r
+                       // see if there's a significant change\r
+                       if(abs(lf_av - lf_av_new) > 10) {\r
+                               DbpString("LF 125/134 Field Change:");\r
+                               DbpIntegers(lf_av,lf_av_new,lf_count);\r
+                               lf_av= lf_av_new;\r
+                               if (lf_av > lf_max)\r
+                                       lf_max = lf_av;\r
+                               lf_count= 0;\r
+                       }\r
+               }\r
+\r
+               if (limit != LF_ONLY) {\r
+                       if (mode == 1){\r
+                               if (abs(hf_av - hf_baseline) > 10) LED_B_ON();\r
+                               else                               LED_B_OFF();\r
+                       }\r
+                       \r
+                       ++hf_count;\r
+                       hf_av_new= ReadAdc(ADC_CHAN_HF);\r
+                       // see if there's a significant change\r
+                       if(abs(hf_av - hf_av_new) > 10) {\r
+                               DbpString("HF 13.56 Field Change:");\r
+                               DbpIntegers(hf_av,hf_av_new,hf_count);\r
+                               hf_av= hf_av_new;\r
+                               if (hf_av > hf_max)\r
+                                       hf_max = hf_av;\r
+                               hf_count= 0;\r
+                       }\r
+               }\r
+               \r
+               if(mode == 2) {\r
+                       if (limit == LF_ONLY) {\r
+                               display_val = lf_av;\r
+                               display_max = lf_max;\r
+                       } else if (limit == HF_ONLY) {\r
+                               display_val = hf_av;\r
+                               display_max = hf_max;\r
+                       } else { /* Pick one at random */\r
+                               if( (hf_max - hf_baseline) > (lf_max - lf_baseline) ) {\r
+                                       display_val = hf_av;\r
+                                       display_max = hf_max;\r
+                               } else {\r
+                                       display_val = lf_av;\r
+                                       display_max = lf_max;\r
+                               }\r
+                       }\r
+                       for (i=0; i<LIGHT_LEN; i++) {\r
+                               if (display_val >= ((display_max/LIGHT_LEN)*i) && display_val <= ((display_max/LIGHT_LEN)*(i+1))) {\r
+                                       if (LIGHT_SCHEME[i] & 0x1) LED_C_ON(); else LED_C_OFF();\r
+                                       if (LIGHT_SCHEME[i] & 0x2) LED_A_ON(); else LED_A_OFF();\r
+                                       if (LIGHT_SCHEME[i] & 0x4) LED_B_ON(); else LED_B_OFF();\r
+                                       if (LIGHT_SCHEME[i] & 0x8) LED_D_ON(); else LED_D_OFF();\r
+                                       break;\r
+                               }\r
+                       }\r
+               }\r
+       }\r
+}\r
+\r
+void UsbPacketReceived(BYTE *packet, int len)\r
+{\r
+       UsbCommand *c = (UsbCommand *)packet;\r
+\r
+       switch(c->cmd) {\r
+               case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:\r
+                       AcquireRawAdcSamples125k(c->ext1);\r
+                       break;\r
+\r
+               case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:\r
+                       ModThenAcquireRawAdcSamples125k(c->ext1,c->ext2,c->ext3,c->d.asBytes);\r
+                       break;\r
+\r
+               case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:\r
+                       AcquireRawAdcSamplesIso15693();\r
+                       break;\r
+\r
+               case CMD_BUFF_CLEAR:\r
+                       BufferClear();\r
+                       break;\r
+\r
+               case CMD_READER_ISO_15693:\r
+                       ReaderIso15693(c->ext1);\r
+                       break;\r
+\r
+               case CMD_SIMTAG_ISO_15693:\r
+                       SimTagIso15693(c->ext1);\r
+                       break;\r
+\r
+               case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443:\r
+                       AcquireRawAdcSamplesIso14443(c->ext1);\r
+                       break;\r
+\r
+               case CMD_READ_SRI512_TAG:\r
+                       ReadSRI512Iso14443(c->ext1);\r
+                       break;\r
+\r
+               case CMD_READER_ISO_14443a:\r
+                       ReaderIso14443a(c->ext1);\r
+                       break;\r
+\r
+               case CMD_SNOOP_ISO_14443:\r
+                       SnoopIso14443();\r
+                       break;\r
+\r
+               case CMD_SNOOP_ISO_14443a:\r
+                       SnoopIso14443a();\r
+                       break;\r
+\r
+               case CMD_SIMULATE_TAG_HF_LISTEN:\r
+                       SimulateTagHfListen();\r
+                       break;\r
+\r
+               case CMD_SIMULATE_TAG_ISO_14443:\r
+                       SimulateIso14443Tag();\r
+                       break;\r
+\r
+               case CMD_SIMULATE_TAG_ISO_14443a:\r
+                       SimulateIso14443aTag(c->ext1, c->ext2);  // ## Simulate iso14443a tag - pass tag type & UID\r
+                       break;\r
+\r
+               case CMD_MEASURE_ANTENNA_TUNING:\r
+                       MeasureAntennaTuning();\r
+                       break;\r
+\r
+               case CMD_LISTEN_READER_FIELD:\r
+                       ListenReaderField(c->ext1);\r
+                       break;\r
+\r
+               case CMD_HID_DEMOD_FSK:\r
+                       CmdHIDdemodFSK(0, 0, 0, 1);                             // Demodulate HID tag\r
+                       break;\r
+\r
+               case CMD_HID_SIM_TAG:\r
+                       CmdHIDsimTAG(c->ext1, c->ext2, 1);                                      // Simulate HID tag by ID\r
+                       break;\r
+\r
+               case CMD_FPGA_MAJOR_MODE_OFF:           // ## FPGA Control\r
+                       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);\r
+                       SpinDelay(200);\r
+                       LED_D_OFF(); // LED D indicates field ON or OFF\r
+                       break;\r
+\r
+               case CMD_READ_TI_TYPE:\r
+                       ReadTItag();\r
+                       break;\r
+\r
+               case CMD_WRITE_TI_TYPE:\r
+                       WriteTItag(c->ext1,c->ext2,c->ext3);\r
+                       break;\r
+\r
+               case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: {\r
+                       UsbCommand n;\r
+                       if(c->cmd == CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K) {\r
+                               n.cmd = CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K;\r
+                       } else {\r
+                               n.cmd = CMD_DOWNLOADED_RAW_BITS_TI_TYPE;\r
+                       }\r
+                       n.ext1 = c->ext1;\r
+                       memcpy(n.d.asDwords, BigBuf+c->ext1, 12*sizeof(DWORD));\r
+                       UsbSendPacket((BYTE *)&n, sizeof(n));\r
+                       break;\r
+               }\r
+               case CMD_DOWNLOADED_SIM_SAMPLES_125K: {\r
+                       BYTE *b = (BYTE *)BigBuf;\r
+                       memcpy(b+c->ext1, c->d.asBytes, 48);\r
+                       break;\r
+               }\r
+               case CMD_SIMULATE_TAG_125K:\r
+                       LED_A_ON();\r
+                       SimulateTagLowFrequency(c->ext1, 1);\r
+                       LED_A_OFF();\r
+                       break;\r
+               case CMD_READ_MEM:\r
+                       ReadMem(c->ext1);\r
+                       break;\r
+               case CMD_SET_LF_DIVISOR:\r
+                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->ext1);\r
+                       break;\r
+               case CMD_VERSION:\r
+                       SendVersion();\r
+                       break;\r
+               case CMD_LF_SIMULATE_BIDIR:\r
+                       SimulateTagLowFrequencyBidir(c->ext1, c->ext2);\r
+                       break;\r
+#ifdef WITH_LCD\r
+               case CMD_LCD_RESET:\r
+                       LCDReset();\r
+                       break;\r
+               case CMD_LCD:\r
+                       LCDSend(c->ext1);\r
+                       break;\r
+#endif\r
+               case CMD_SETUP_WRITE:\r
+               case CMD_FINISH_WRITE:\r
+               case CMD_HARDWARE_RESET:\r
+                       USB_D_PLUS_PULLUP_OFF();\r
+                       SpinDelay(1000);\r
+                       SpinDelay(1000);\r
+                       AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;\r
+                       for(;;) {\r
+                               // We're going to reset, and the bootrom will take control.\r
+                       }\r
+                       break;\r
+               case CMD_START_FLASH:\r
+                       if(common_area.flags.bootrom_present) {\r
+                               common_area.command = COMMON_AREA_COMMAND_ENTER_FLASH_MODE;\r
+                       }\r
+                       USB_D_PLUS_PULLUP_OFF();\r
+                       AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;\r
+                       for(;;);\r
+                       break;\r
+                       \r
+               case CMD_DEVICE_INFO: {\r
+                       UsbCommand c;\r
+                       c.cmd = CMD_DEVICE_INFO;\r
+                       c.ext1 = DEVICE_INFO_FLAG_OSIMAGE_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_OS;\r
+                       if(common_area.flags.bootrom_present) c.ext1 |= DEVICE_INFO_FLAG_BOOTROM_PRESENT;\r
+                       UsbSendPacket((BYTE*)&c, sizeof(c));\r
+               }\r
+                       break;\r
+               default:\r
+                       DbpString("unknown command");\r
+                       break;\r
+       }\r
+}\r
+\r
+void  __attribute__((noreturn)) AppMain(void)\r
+{\r
+       SpinDelay(100);\r
+       \r
+       if(common_area.magic != COMMON_AREA_MAGIC || common_area.version != 1) {\r
+               /* Initialize common area */\r
+               memset(&common_area, 0, sizeof(common_area));\r
+               common_area.magic = COMMON_AREA_MAGIC;\r
+               common_area.version = 1;\r
+       }\r
+       common_area.flags.osimage_present = 1;\r
+\r
+       LED_D_OFF();\r
+       LED_C_OFF();\r
+       LED_B_OFF();\r
+       LED_A_OFF();\r
+\r
+       UsbStart();\r
+\r
+       // The FPGA gets its clock from us from PCK0 output, so set that up.\r
+       AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;\r
+       AT91C_BASE_PIOA->PIO_PDR = GPIO_PCK0;\r
+       AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK0;\r
+       // PCK0 is PLL clock / 4 = 96Mhz / 4 = 24Mhz\r
+       AT91C_BASE_PMC->PMC_PCKR[0] = AT91C_PMC_CSS_PLL_CLK |\r
+               AT91C_PMC_PRES_CLK_4;\r
+       AT91C_BASE_PIOA->PIO_OER = GPIO_PCK0;\r
+\r
+       // Reset SPI\r
+       AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;\r
+       // Reset SSC\r
+       AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;\r
+\r
+       // Load the FPGA image, which we have stored in our flash.\r
+       FpgaDownloadAndGo();\r
+\r
+#ifdef WITH_LCD\r
+\r
+       LCDInit();\r
+\r
+       // test text on different colored backgrounds\r
+       LCDString(" The quick brown fox  ",     (char *)&FONT6x8,1,1+8*0,WHITE  ,BLACK );\r
+       LCDString("  jumped over the     ",     (char *)&FONT6x8,1,1+8*1,BLACK  ,WHITE );\r
+       LCDString("     lazy dog.        ",     (char *)&FONT6x8,1,1+8*2,YELLOW ,RED   );\r
+       LCDString(" AaBbCcDdEeFfGgHhIiJj ",     (char *)&FONT6x8,1,1+8*3,RED    ,GREEN );\r
+       LCDString(" KkLlMmNnOoPpQqRrSsTt ",     (char *)&FONT6x8,1,1+8*4,MAGENTA,BLUE  );\r
+       LCDString("UuVvWwXxYyZz0123456789",     (char *)&FONT6x8,1,1+8*5,BLUE   ,YELLOW);\r
+       LCDString("`-=[]_;',./~!@#$%^&*()",     (char *)&FONT6x8,1,1+8*6,BLACK  ,CYAN  );\r
+       LCDString("     _+{}|:\\\"<>?     ",(char *)&FONT6x8,1,1+8*7,BLUE  ,MAGENTA);\r
+\r
+       // color bands\r
+       LCDFill(0, 1+8* 8, 132, 8, BLACK);\r
+       LCDFill(0, 1+8* 9, 132, 8, WHITE);\r
+       LCDFill(0, 1+8*10, 132, 8, RED);\r
+       LCDFill(0, 1+8*11, 132, 8, GREEN);\r
+       LCDFill(0, 1+8*12, 132, 8, BLUE);\r
+       LCDFill(0, 1+8*13, 132, 8, YELLOW);\r
+       LCDFill(0, 1+8*14, 132, 8, CYAN);\r
+       LCDFill(0, 1+8*15, 132, 8, MAGENTA);\r
+\r
+#endif\r
+\r
+       for(;;) {\r
+               UsbPoll(FALSE);\r
+               WDT_HIT();\r
+\r
+               if (BUTTON_HELD(1000) > 0)\r
+                       SamyRun();\r
+       }\r
+}\r
index 1cb971bde3e4f68f6635c7a7f129fbe386c01199..bf45407f0cb62b86e915f6433bef0bcb200a5fd2 100644 (file)
@@ -34,33 +34,33 @@ void FpgaGatherVersion(char *dst, int len);
 void FpgaSetupSsc(void);\r
 void SetupSpi(int mode);\r
 void FpgaSetupSscDma(BYTE *buf, int len);\r
-void SetAdcMuxFor(int whichGpio);\r
+void SetAdcMuxFor(DWORD whichGpio);\r
 \r
 // Definitions for the FPGA commands.\r
-#define FPGA_CMD_SET_CONFREG                                                           (1<<12)\r
-#define FPGA_CMD_SET_DIVISOR                                                           (2<<12)\r
+#define FPGA_CMD_SET_CONFREG                                           (1<<12)\r
+#define FPGA_CMD_SET_DIVISOR                                           (2<<12)\r
 // Definitions for the FPGA configuration word.\r
-#define FPGA_MAJOR_MODE_LF_READER                                              (0<<5)\r
+#define FPGA_MAJOR_MODE_LF_READER                                      (0<<5)\r
 #define FPGA_MAJOR_MODE_LF_SIMULATOR                           (1<<5)\r
 #define FPGA_MAJOR_MODE_HF_READER_TX                           (2<<5)\r
-#define FPGA_MAJOR_MODE_HF_READER_RX_XCORR     (3<<5)\r
+#define FPGA_MAJOR_MODE_HF_READER_RX_XCORR                     (3<<5)\r
 #define FPGA_MAJOR_MODE_HF_SIMULATOR                           (4<<5)\r
 #define FPGA_MAJOR_MODE_HF_ISO14443A                           (5<<5)\r
 #define FPGA_MAJOR_MODE_LF_PASSTHRU                                    (6<<5)\r
-#define FPGA_MAJOR_MODE_OFF                                                                    (7<<5)\r
+#define FPGA_MAJOR_MODE_OFF                                                    (7<<5)\r
 // Options for the HF reader, tx to tag\r
 #define FPGA_HF_READER_TX_SHALLOW_MOD                          (1<<0)\r
 // Options for the HF reader, correlating against rx from tag\r
-#define FPGA_HF_READER_RX_XCORR_848_KHZ                        (1<<0)\r
+#define FPGA_HF_READER_RX_XCORR_848_KHZ                                (1<<0)\r
 #define FPGA_HF_READER_RX_XCORR_SNOOP                          (1<<1)\r
 // Options for the HF simulated tag, how to modulate\r
-#define FPGA_HF_SIMULATOR_NO_MODULATION                        (0<<0)\r
-#define FPGA_HF_SIMULATOR_MODULATE_BPSK                        (1<<0)\r
+#define FPGA_HF_SIMULATOR_NO_MODULATION                                (0<<0)\r
+#define FPGA_HF_SIMULATOR_MODULATE_BPSK                                (1<<0)\r
 // Options for ISO14443A\r
-#define FPGA_HF_ISO14443A_SNIFFER                                              (0<<0)\r
-#define FPGA_HF_ISO14443A_TAGSIM_LISTEN                        (1<<0)\r
+#define FPGA_HF_ISO14443A_SNIFFER                                      (0<<0)\r
+#define FPGA_HF_ISO14443A_TAGSIM_LISTEN                                (1<<0)\r
 #define FPGA_HF_ISO14443A_TAGSIM_MOD                           (2<<0)\r
-#define FPGA_HF_ISO14443A_READER_LISTEN                        (3<<0)\r
+#define FPGA_HF_ISO14443A_READER_LISTEN                                (3<<0)\r
 #define FPGA_HF_ISO14443A_READER_MOD                           (4<<0)\r
 \r
 /// lfops.h\r
index af2f02abaf6df550a9f93d2cf313a868bb16ddf5..04db41b3c38ebc97fe948fe524918f8e1ca6b38b 100644 (file)
@@ -21,27 +21,29 @@ void SetupSpi(int mode)
        // PA14 -> SPI_SPCK Serial Clock\r
 \r
        // Disable PIO control of the following pins, allows use by the SPI peripheral\r
-       PIO_DISABLE                      =      (1 << GPIO_NCS0)        |\r
-                                                       (1 << GPIO_NCS2)        |\r
-                                                       (1 << GPIO_MISO)        |\r
-                                                       (1 << GPIO_MOSI)        |\r
-                                                       (1 << GPIO_SPCK);\r
+       AT91C_BASE_PIOA->PIO_PDR =\r
+               GPIO_NCS0       |\r
+               GPIO_NCS2       |\r
+               GPIO_MISO       |\r
+               GPIO_MOSI       |\r
+               GPIO_SPCK;\r
 \r
-       PIO_PERIPHERAL_A_SEL =  (1 << GPIO_NCS0)        |\r
-                                                       (1 << GPIO_MISO)        |\r
-                                                       (1 << GPIO_MOSI)        |\r
-                                                       (1 << GPIO_SPCK);\r
+       AT91C_BASE_PIOA->PIO_ASR =\r
+               GPIO_NCS0       |\r
+               GPIO_MISO       |\r
+               GPIO_MOSI       |\r
+               GPIO_SPCK;\r
 \r
-       PIO_PERIPHERAL_B_SEL =  (1 << GPIO_NCS2);\r
+       AT91C_BASE_PIOA->PIO_BSR = GPIO_NCS2;\r
 \r
        //enable the SPI Peripheral clock\r
-       PMC_PERIPHERAL_CLK_ENABLE = (1<<PERIPH_SPI);\r
+       AT91C_BASE_PMC->PMC_PCER = (1<<AT91C_ID_SPI);\r
        // Enable SPI\r
-       SPI_CONTROL = SPI_CONTROL_ENABLE;\r
+       AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;\r
 \r
        switch (mode) {\r
                case SPI_FPGA_MODE:\r
-                       SPI_MODE =\r
+                       AT91C_BASE_SPI->SPI_MR =\r
                                ( 0 << 24)      |       // Delay between chip selects (take default: 6 MCK periods)\r
                                (14 << 16)      |       // Peripheral Chip Select (selects FPGA SPI_NCS0 or PA11)\r
                                ( 0 << 7)       |       // Local Loopback Disabled\r
@@ -49,7 +51,7 @@ void SetupSpi(int mode)
                                ( 0 << 2)       |       // Chip selects connected directly to peripheral\r
                                ( 0 << 1)       |       // Fixed Peripheral Select\r
                                ( 1 << 0);              // Master Mode\r
-                       SPI_FOR_CHIPSEL_0 =\r
+                       AT91C_BASE_SPI->SPI_CSR[0] =\r
                                ( 1 << 24)      |       // Delay between Consecutive Transfers (32 MCK periods)\r
                                ( 1 << 16)      |       // Delay Before SPCK (1 MCK period)\r
                                ( 6 << 8)       |       // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud\r
@@ -59,7 +61,7 @@ void SetupSpi(int mode)
                                ( 0 << 0);              // Clock Polarity inactive state is logic 0\r
                        break;\r
                case SPI_LCD_MODE:\r
-                       SPI_MODE =\r
+                       AT91C_BASE_SPI->SPI_MR =\r
                                ( 0 << 24)      |       // Delay between chip selects (take default: 6 MCK periods)\r
                                (11 << 16)      |       // Peripheral Chip Select (selects LCD SPI_NCS2 or PA10)\r
                                ( 0 << 7)       |       // Local Loopback Disabled\r
@@ -67,7 +69,7 @@ void SetupSpi(int mode)
                                ( 0 << 2)       |       // Chip selects connected directly to peripheral\r
                                ( 0 << 1)       |       // Fixed Peripheral Select\r
                                ( 1 << 0);              // Master Mode\r
-                       SPI_FOR_CHIPSEL_2 =\r
+                       AT91C_BASE_SPI->SPI_CSR[2] =\r
                                ( 1 << 24)      |       // Delay between Consecutive Transfers (32 MCK periods)\r
                                ( 1 << 16)      |       // Delay Before SPCK (1 MCK period)\r
                                ( 6 << 8)       |       // Serial Clock Baud Rate (baudrate = MCK/6 = 24Mhz/6 = 4M baud\r
@@ -77,7 +79,7 @@ void SetupSpi(int mode)
                                ( 0 << 0);              // Clock Polarity inactive state is logic 0\r
                        break;\r
                default:                                // Disable SPI\r
-                       SPI_CONTROL = SPI_CONTROL_DISABLE;\r
+                       AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIDIS;\r
                        break;\r
        }\r
 }\r
@@ -89,35 +91,36 @@ void SetupSpi(int mode)
 void FpgaSetupSsc(void)\r
 {\r
        // First configure the GPIOs, and get ourselves a clock.\r
-       PIO_PERIPHERAL_A_SEL =  (1 << GPIO_SSC_FRAME)   |\r
-                                                       (1 << GPIO_SSC_DIN)             |\r
-                                                       (1 << GPIO_SSC_DOUT)    |\r
-                                                       (1 << GPIO_SSC_CLK);\r
-       PIO_DISABLE = (1 << GPIO_SSC_DOUT);\r
+       AT91C_BASE_PIOA->PIO_ASR =\r
+               GPIO_SSC_FRAME  |\r
+               GPIO_SSC_DIN    |\r
+               GPIO_SSC_DOUT   |\r
+               GPIO_SSC_CLK;\r
+       AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;\r
 \r
-       PMC_PERIPHERAL_CLK_ENABLE = (1 << PERIPH_SSC);\r
+       AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_SSC);\r
 \r
        // Now set up the SSC proper, starting from a known state.\r
-       SSC_CONTROL = SSC_CONTROL_RESET;\r
+       AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;\r
 \r
        // RX clock comes from TX clock, RX starts when TX starts, data changes\r
        // on RX clock rising edge, sampled on falling edge\r
-       SSC_RECEIVE_CLOCK_MODE = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1);\r
+       AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1);\r
 \r
        // 8 bits per transfer, no loopback, MSB first, 1 transfer per sync\r
        // pulse, no output sync, start on positive-going edge of sync\r
-       SSC_RECEIVE_FRAME_MODE = SSC_FRAME_MODE_BITS_IN_WORD(8) |\r
-               SSC_FRAME_MODE_MSB_FIRST | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);\r
+       AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) |\r
+               AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);\r
 \r
        // clock comes from TK pin, no clock output, outputs change on falling\r
        // edge of TK, start on rising edge of TF\r
-       SSC_TRANSMIT_CLOCK_MODE = SSC_CLOCK_MODE_SELECT(2) |\r
+       AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) |\r
                SSC_CLOCK_MODE_START(5);\r
 \r
        // tx framing is the same as the rx framing\r
-       SSC_TRANSMIT_FRAME_MODE = SSC_RECEIVE_FRAME_MODE;\r
+       AT91C_BASE_SSC->SSC_TFMR = AT91C_BASE_SSC->SSC_RFMR;\r
 \r
-       SSC_CONTROL = SSC_CONTROL_RX_ENABLE | SSC_CONTROL_TX_ENABLE;\r
+       AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;\r
 }\r
 \r
 //-----------------------------------------------------------------------------\r
@@ -128,11 +131,11 @@ void FpgaSetupSsc(void)
 //-----------------------------------------------------------------------------\r
 void FpgaSetupSscDma(BYTE *buf, int len)\r
 {\r
-       PDC_RX_POINTER(SSC_BASE) = (DWORD)buf;\r
-       PDC_RX_COUNTER(SSC_BASE) = len;\r
-       PDC_RX_NEXT_POINTER(SSC_BASE) = (DWORD)buf;\r
-       PDC_RX_NEXT_COUNTER(SSC_BASE) = len;\r
-       PDC_CONTROL(SSC_BASE) = PDC_RX_ENABLE;\r
+       AT91C_BASE_PDC_SSC->PDC_RPR = (DWORD)buf;\r
+       AT91C_BASE_PDC_SSC->PDC_RCR = len;\r
+       AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD)buf;\r
+       AT91C_BASE_PDC_SSC->PDC_RNCR = len;\r
+       AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;\r
 }\r
 \r
 static void DownloadFPGA_byte(unsigned char w)\r
@@ -154,8 +157,8 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers
 {\r
        int i=0;\r
 \r
-       PIO_OUTPUT_ENABLE = (1 << GPIO_FPGA_ON);\r
-       PIO_ENABLE = (1 << GPIO_FPGA_ON);\r
+       AT91C_BASE_PIOA->PIO_OER = GPIO_FPGA_ON;\r
+       AT91C_BASE_PIOA->PIO_PER = GPIO_FPGA_ON;\r
        HIGH(GPIO_FPGA_ON);             // ensure everything is powered on\r
 \r
        SpinDelay(50);\r
@@ -163,20 +166,27 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers
        LED_D_ON();\r
 \r
        // These pins are inputs\r
-    PIO_OUTPUT_DISABLE =     (1 << GPIO_FPGA_NINIT) | (1 << GPIO_FPGA_DONE);\r
+    AT91C_BASE_PIOA->PIO_ODR =\r
+       GPIO_FPGA_NINIT |\r
+       GPIO_FPGA_DONE;\r
        // PIO controls the following pins\r
-    PIO_ENABLE =             (1 << GPIO_FPGA_NINIT) | (1 << GPIO_FPGA_DONE);\r
+    AT91C_BASE_PIOA->PIO_PER =\r
+       GPIO_FPGA_NINIT |\r
+       GPIO_FPGA_DONE;\r
        // Enable pull-ups\r
-       PIO_NO_PULL_UP_DISABLE = (1 << GPIO_FPGA_NINIT) | (1 << GPIO_FPGA_DONE);\r
+       AT91C_BASE_PIOA->PIO_PPUER =\r
+               GPIO_FPGA_NINIT |\r
+               GPIO_FPGA_DONE;\r
 \r
        // setup initial logic state\r
        HIGH(GPIO_FPGA_NPROGRAM);\r
        LOW(GPIO_FPGA_CCLK);\r
        LOW(GPIO_FPGA_DIN);\r
        // These pins are outputs\r
-       PIO_OUTPUT_ENABLE = (1 << GPIO_FPGA_NPROGRAM)   |\r
-                                               (1 << GPIO_FPGA_CCLK)           |\r
-                                               (1 << GPIO_FPGA_DIN);\r
+       AT91C_BASE_PIOA->PIO_OER =\r
+               GPIO_FPGA_NPROGRAM      |\r
+               GPIO_FPGA_CCLK          |\r
+               GPIO_FPGA_DIN;\r
 \r
        // enter FPGA configuration mode\r
        LOW(GPIO_FPGA_NPROGRAM);\r
@@ -185,7 +195,7 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers
 \r
        i=100000;\r
        // wait for FPGA ready to accept data signal\r
-       while ((i) && ( !(PIO_PIN_DATA_STATUS & (1<<GPIO_FPGA_NINIT) ) ) ) {\r
+       while ((i) && ( !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_FPGA_NINIT ) ) ) {\r
                i--;\r
        }\r
 \r
@@ -215,7 +225,7 @@ static void DownloadFPGA(const char *FpgaImage, int FpgaImageLen, int byterevers
 \r
        // continue to clock FPGA until ready signal goes high\r
        i=100000;\r
-       while ( (i--) && ( !(PIO_PIN_DATA_STATUS & (1<<GPIO_FPGA_DONE) ) ) ) {\r
+       while ( (i--) && ( !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_FPGA_DONE ) ) ) {\r
                HIGH(GPIO_FPGA_CCLK);\r
                LOW(GPIO_FPGA_CCLK);\r
        }\r
@@ -235,7 +245,7 @@ static int bitparse_initialized;
  * 00 09 0f f0 0f f0 0f f0 0f f0 00 00 01\r
  * After that the format is 1 byte section type (ASCII character), 2 byte length\r
  * (big endian), <length> bytes content. Except for section 'e' which has 4 bytes\r
- * length.
+ * length.\r
  */\r
 static const char _bitparse_fixed_header[] = {0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, 0x00, 0x00, 0x01};\r
 static int bitparse_init(void * start_address, void *end_address)\r
@@ -303,11 +313,11 @@ int bitparse_find_section(char section_name, char **section_start, unsigned int
 extern char _binary_fpga_bit_start, _binary_fpga_bit_end;\r
 void FpgaDownloadAndGo(void)\r
 {\r
-       /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start
+       /* Check for the new flash image format: Should have the .bit file at &_binary_fpga_bit_start\r
         */\r
        if(bitparse_init(&_binary_fpga_bit_start, &_binary_fpga_bit_end)) {\r
                /* Successfully initialized the .bit parser. Find the 'e' section and\r
-                * send its contents to the FPGA.
+                * send its contents to the FPGA.\r
                 */\r
                char *bitstream_start;\r
                unsigned int bitstream_length;\r
@@ -323,7 +333,7 @@ void FpgaDownloadAndGo(void)
         * = 10,524 DWORDs, stored as DWORDS e.g. little-endian in memory, but each DWORD\r
         * is still to be transmitted in MSBit first order. Set the invert flag to indicate\r
         * that the DownloadFPGA function should invert every 4 byte sequence when doing\r
-        * the bytewise download.
+        * the bytewise download.\r
         */\r
        if( *(DWORD*)0x102000 == 0xFFFFFFFF && *(DWORD*)0x102004 == 0xAA995566 )\r
                DownloadFPGA((char*)0x102000, 10524*4, 1);\r
@@ -368,8 +378,8 @@ void FpgaGatherVersion(char *dst, int len)
 void FpgaSendCommand(WORD cmd, WORD v)\r
 {\r
        SetupSpi(SPI_FPGA_MODE);\r
-       while ((SPI_STATUS & SPI_STATUS_TX_EMPTY) == 0);                // wait for the transfer to complete\r
-       SPI_TX_DATA = SPI_CONTROL_LAST_TRANSFER | cmd | v;              // send the data\r
+       while ((AT91C_BASE_SPI->SPI_SR & AT91C_SPI_TXEMPTY) == 0);              // wait for the transfer to complete\r
+       AT91C_BASE_SPI->SPI_TDR = AT91C_SPI_LASTXFER | cmd | v;         // send the data\r
 }\r
 //-----------------------------------------------------------------------------\r
 // Write the FPGA setup word (that determines what mode the logic is in, read\r
@@ -386,17 +396,19 @@ void FpgaWriteConfWord(BYTE v)
 // closable, but should only close one at a time. Not an FPGA thing, but\r
 // the samples from the ADC always flow through the FPGA.\r
 //-----------------------------------------------------------------------------\r
-void SetAdcMuxFor(int whichGpio)\r
+void SetAdcMuxFor(DWORD whichGpio)\r
 {\r
-       PIO_OUTPUT_ENABLE = (1 << GPIO_MUXSEL_HIPKD) |\r
-                                               (1 << GPIO_MUXSEL_LOPKD) |\r
-                                               (1 << GPIO_MUXSEL_LORAW) |\r
-                                               (1 << GPIO_MUXSEL_HIRAW);\r
-\r
-       PIO_ENABLE              =       (1 << GPIO_MUXSEL_HIPKD) |\r
-                                               (1 << GPIO_MUXSEL_LOPKD) |\r
-                                               (1 << GPIO_MUXSEL_LORAW) |\r
-                                               (1 << GPIO_MUXSEL_HIRAW);\r
+       AT91C_BASE_PIOA->PIO_OER =\r
+               GPIO_MUXSEL_HIPKD |\r
+               GPIO_MUXSEL_LOPKD |\r
+               GPIO_MUXSEL_LORAW |\r
+               GPIO_MUXSEL_HIRAW;\r
+\r
+       AT91C_BASE_PIOA->PIO_PER =\r
+               GPIO_MUXSEL_HIPKD |\r
+               GPIO_MUXSEL_LOPKD |\r
+               GPIO_MUXSEL_LORAW |\r
+               GPIO_MUXSEL_HIRAW;\r
 \r
        LOW(GPIO_MUXSEL_HIPKD);\r
        LOW(GPIO_MUXSEL_HIRAW);\r
index 311254d9e55a7d93a69c50f6c7ff17e977a9657f..fab7336bc1bb73484bc14dbdc4c2eb816d3fb392 100644 (file)
@@ -295,11 +295,11 @@ static BOOL GetIso14443CommandFromReader(BYTE *received, int *len, int maxLen)
 \r
         if(BUTTON_PRESS()) return FALSE;\r
 \r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = 0x00;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = 0x00;\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            BYTE b = (BYTE)SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            BYTE b = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
 \r
             mask = 0x80;\r
             for(i = 0; i < 8; i++, mask >>= 1) {\r
@@ -392,24 +392,24 @@ void SimulateIso14443Tag(void)
         LED_D_OFF();\r
         FpgaWriteConfWord(\r
                FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_BPSK);\r
-        SSC_TRANSMIT_HOLDING = 0xff;\r
+        AT91C_BASE_SSC->SSC_THR = 0xff;\r
         FpgaSetupSsc();\r
 \r
         // Transmit the response.\r
         i = 0;\r
         for(;;) {\r
-            if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
+            if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
                 BYTE b = resp[i];\r
 \r
-                SSC_TRANSMIT_HOLDING = b;\r
+                AT91C_BASE_SSC->SSC_THR = b;\r
 \r
                 i++;\r
                 if(i > respLen) {\r
                     break;\r
                 }\r
             }\r
-            if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-                volatile BYTE b = (BYTE)SSC_RECEIVE_HOLDING;\r
+            if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+                volatile BYTE b = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
                 (void)b;\r
             }\r
         }\r
@@ -454,7 +454,7 @@ static struct {
  *\r
  * Returns: true if we received a EOF\r
  *          false if we are still waiting for some more\r
- *
+ *\r
  */\r
 static BOOL Handle14443SamplesDemod(int ci, int cq)\r
 {\r
@@ -612,7 +612,7 @@ static BOOL Handle14443SamplesDemod(int ci, int cq)
  *  Demodulate the samples we received from the tag\r
  *  weTx: set to 'TRUE' if we behave like a reader\r
  *        set to 'FALSE' if we behave like a snooper\r
- *  quiet: set to 'TRUE' to disable debug output
+ *  quiet: set to 'TRUE' to disable debug output\r
  */\r
 static void GetSamplesFor14443Demod(BOOL weTx, int n, BOOL quiet)\r
 {\r
@@ -654,10 +654,10 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n, BOOL quiet)
        (weTx ? 0 : FPGA_HF_READER_RX_XCORR_SNOOP));\r
 \r
     for(;;) {\r
-        int behindBy = lastRxCounter - PDC_RX_COUNTER(SSC_BASE);\r
+        int behindBy = lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR;\r
         if(behindBy > max) max = behindBy;\r
 \r
-        while(((lastRxCounter-PDC_RX_COUNTER(SSC_BASE)) & (DMA_BUFFER_SIZE-1))\r
+        while(((lastRxCounter-AT91C_BASE_PDC_SSC->PDC_RCR) & (DMA_BUFFER_SIZE-1))\r
                     > 2)\r
         {\r
             ci = upTo[0];\r
@@ -665,8 +665,8 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n, BOOL quiet)
             upTo += 2;\r
             if(upTo - dmaBuf > DMA_BUFFER_SIZE) {\r
                 upTo -= DMA_BUFFER_SIZE;\r
-                PDC_RX_NEXT_POINTER(SSC_BASE) = (DWORD)upTo;\r
-                PDC_RX_NEXT_COUNTER(SSC_BASE) = DMA_BUFFER_SIZE;\r
+                AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD)upTo;\r
+                AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;\r
             }\r
             lastRxCounter -= 2;\r
             if(lastRxCounter <= 0) {\r
@@ -687,7 +687,7 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n, BOOL quiet)
             break;\r
         }\r
     }\r
-    PDC_CONTROL(SSC_BASE) = PDC_RX_DISABLE;\r
+    AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;\r
     if (!quiet) DbpIntegers(max, gotFrame, Demod.len);\r
 }\r
 \r
@@ -707,12 +707,12 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n, BOOL quiet)
 \r
     c = 0;\r
     for(;;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = 0x43;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = 0x43;\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
             SBYTE b;\r
-            b = (SBYTE)SSC_RECEIVE_HOLDING;\r
+            b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;\r
 \r
             dest[c++] = (BYTE)b;\r
 \r
@@ -732,8 +732,8 @@ static void TransmitFor14443(void)
 \r
     FpgaSetupSsc();\r
 \r
-    while(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-        SSC_TRANSMIT_HOLDING = 0xff;\r
+    while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+        AT91C_BASE_SSC->SSC_THR = 0xff;\r
     }\r
 \r
     // Signal field is ON with the appropriate Red LED\r
@@ -744,12 +744,12 @@ static void TransmitFor14443(void)
        FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD);\r
 \r
     for(c = 0; c < 10;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = 0xff;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = 0xff;\r
             c++;\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
             (void)r;\r
         }\r
         WDT_HIT();\r
@@ -757,15 +757,15 @@ static void TransmitFor14443(void)
 \r
     c = 0;\r
     for(;;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = ToSend[c];\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = ToSend[c];\r
             c++;\r
             if(c >= ToSendMax) {\r
                 break;\r
             }\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
             (void)r;\r
         }\r
         WDT_HIT();\r
@@ -831,8 +831,8 @@ void CodeIso14443bAsReader(const BYTE *cmd, int len)
 \r
 //-----------------------------------------------------------------------------\r
 // Read an ISO 14443 tag. We send it some set of commands, and record the\r
-// responses.
-// The command name is misleading, it actually decodes the reponse in HEX
+// responses.\r
+// The command name is misleading, it actually decodes the reponse in HEX\r
 // into the output buffer (read the result using hexsamples, not hisamples)\r
 //-----------------------------------------------------------------------------\r
 void AcquireRawAdcSamplesIso14443(DWORD parameter)\r
@@ -861,19 +861,19 @@ void AcquireRawAdcSamplesIso14443(DWORD parameter)
     GetSamplesFor14443Demod(TRUE, 2000, FALSE);\r
 //    LED_A_OFF();\r
 }\r
-
+\r
 //-----------------------------------------------------------------------------\r
 // Read a SRI512 ISO 14443 tag.\r
-//
-// SRI512 tags are just simple memory tags, here we're looking at making a dump
-// of the contents of the memory. No anticollision algorithm is done, we assume
-// we have a single tag in the field.
-//
+//\r
+// SRI512 tags are just simple memory tags, here we're looking at making a dump\r
+// of the contents of the memory. No anticollision algorithm is done, we assume\r
+// we have a single tag in the field.\r
+//\r
 // I tried to be systematic and check every answer of the tag, every CRC, etc...\r
 //-----------------------------------------------------------------------------\r
 void ReadSRI512Iso14443(DWORD parameter)\r
 {\r
-    BYTE i = 0x00;
+    BYTE i = 0x00;\r
 \r
     // Make sure that we start from off, since the tags are stateful;\r
     // confusing things will happen if we don't reset them between reads.\r
@@ -890,7 +890,7 @@ void ReadSRI512Iso14443(DWORD parameter)
     FpgaWriteConfWord(\r
        FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ);\r
     SpinDelay(200);\r
-
+\r
     // First command: wake up the tag using the INITIATE command\r
     BYTE cmd1[] = { 0x06, 0x00, 0x97, 0x5b};\r
     CodeIso14443bAsReader(cmd1, sizeof(cmd1));\r
@@ -898,102 +898,102 @@ void ReadSRI512Iso14443(DWORD parameter)
 //    LED_A_ON();\r
     GetSamplesFor14443Demod(TRUE, 2000,TRUE);\r
 //    LED_A_OFF();\r
-
-    if (Demod.len == 0) {
-       DbpString("No response from tag");
-       return;
-    } else {
-       DbpString("Randomly generated UID from tag (+ 2 byte CRC):");
-       DbpIntegers(Demod.output[0], Demod.output[1],Demod.output[2]);
-    }
-    // There is a response, SELECT the uid
-    DbpString("Now SELECT tag:");
-    cmd1[0] = 0x0E; // 0x0E is SELECT
-    cmd1[1] = Demod.output[0];
+\r
+    if (Demod.len == 0) {\r
+       DbpString("No response from tag");\r
+       return;\r
+    } else {\r
+       DbpString("Randomly generated UID from tag (+ 2 byte CRC):");\r
+       DbpIntegers(Demod.output[0], Demod.output[1],Demod.output[2]);\r
+    }\r
+    // There is a response, SELECT the uid\r
+    DbpString("Now SELECT tag:");\r
+    cmd1[0] = 0x0E; // 0x0E is SELECT\r
+    cmd1[1] = Demod.output[0];\r
     ComputeCrc14443(CRC_14443_B, cmd1, 2, &cmd1[2], &cmd1[3]);\r
     CodeIso14443bAsReader(cmd1, sizeof(cmd1));\r
     TransmitFor14443();\r
 //    LED_A_ON();\r
     GetSamplesFor14443Demod(TRUE, 2000,TRUE);\r
 //    LED_A_OFF();\r
-    if (Demod.len != 3) {
-       DbpString("Expected 3 bytes from tag, got:");
-       DbpIntegers(Demod.len,0x0,0x0);
-       return;
-    }
-    // Check the CRC of the answer:
+    if (Demod.len != 3) {\r
+       DbpString("Expected 3 bytes from tag, got:");\r
+       DbpIntegers(Demod.len,0x0,0x0);\r
+       return;\r
+    }\r
+    // Check the CRC of the answer:\r
     ComputeCrc14443(CRC_14443_B, Demod.output, 1 , &cmd1[2], &cmd1[3]);\r
     if(cmd1[2] != Demod.output[1] || cmd1[3] != Demod.output[2]) {\r
-       DbpString("CRC Error reading select response.");
-       return;
-    }
-    // Check response from the tag: should be the same UID as the command we just sent:
-    if (cmd1[1] != Demod.output[0]) {
-       DbpString("Bad response to SELECT from Tag, aborting:");
-       DbpIntegers(cmd1[1],Demod.output[0],0x0);
-       return;
-    }
-    // Tag is now selected,
-    // First get the tag's UID:
-    cmd1[0] = 0x0B;
-    ComputeCrc14443(CRC_14443_B, cmd1, 1 , &cmd1[1], &cmd1[2]);
+       DbpString("CRC Error reading select response.");\r
+       return;\r
+    }\r
+    // Check response from the tag: should be the same UID as the command we just sent:\r
+    if (cmd1[1] != Demod.output[0]) {\r
+       DbpString("Bad response to SELECT from Tag, aborting:");\r
+       DbpIntegers(cmd1[1],Demod.output[0],0x0);\r
+       return;\r
+    }\r
+    // Tag is now selected,\r
+    // First get the tag's UID:\r
+    cmd1[0] = 0x0B;\r
+    ComputeCrc14443(CRC_14443_B, cmd1, 1 , &cmd1[1], &cmd1[2]);\r
     CodeIso14443bAsReader(cmd1, 3); // Only first three bytes for this one\r
     TransmitFor14443();\r
 //    LED_A_ON();\r
     GetSamplesFor14443Demod(TRUE, 2000,TRUE);\r
 //    LED_A_OFF();\r
-    if (Demod.len != 10) {
-       DbpString("Expected 10 bytes from tag, got:");
-       DbpIntegers(Demod.len,0x0,0x0);
-       return;
-    }
-    // The check the CRC of the answer (use cmd1 as temporary variable):
+    if (Demod.len != 10) {\r
+       DbpString("Expected 10 bytes from tag, got:");\r
+       DbpIntegers(Demod.len,0x0,0x0);\r
+       return;\r
+    }\r
+    // The check the CRC of the answer (use cmd1 as temporary variable):\r
     ComputeCrc14443(CRC_14443_B, Demod.output, 8, &cmd1[2], &cmd1[3]);\r
            if(cmd1[2] != Demod.output[8] || cmd1[3] != Demod.output[9]) {\r
-       DbpString("CRC Error reading block! - Below: expected, got");
-       DbpIntegers( (cmd1[2]<<8)+cmd1[3], (Demod.output[8]<<8)+Demod.output[9],0);
-       // Do not return;, let's go on... (we should retry, maybe ?)
-    }
-    DbpString("Tag UID (64 bits):");
-    DbpIntegers((Demod.output[7]<<24) + (Demod.output[6]<<16) + (Demod.output[5]<<8) + Demod.output[4], (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0], 0);
-
-    // Now loop to read all 16 blocks, address from 0 to 15
-    DbpString("Tag memory dump, block 0 to 15");
-    cmd1[0] = 0x08;
-    i = 0x00;
-    for (;;) {
-           if (i == 0x10) {
-                   DbpString("System area block (0xff):");
-                   i = 0xff;
-           }
-           cmd1[1] = i;
+       DbpString("CRC Error reading block! - Below: expected, got");\r
+       DbpIntegers( (cmd1[2]<<8)+cmd1[3], (Demod.output[8]<<8)+Demod.output[9],0);\r
+       // Do not return;, let's go on... (we should retry, maybe ?)\r
+    }\r
+    DbpString("Tag UID (64 bits):");\r
+    DbpIntegers((Demod.output[7]<<24) + (Demod.output[6]<<16) + (Demod.output[5]<<8) + Demod.output[4], (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0], 0);\r
+\r
+    // Now loop to read all 16 blocks, address from 0 to 15\r
+    DbpString("Tag memory dump, block 0 to 15");\r
+    cmd1[0] = 0x08;\r
+    i = 0x00;\r
+    for (;;) {\r
+           if (i == 0x10) {\r
+                   DbpString("System area block (0xff):");\r
+                   i = 0xff;\r
+           }\r
+           cmd1[1] = i;\r
            ComputeCrc14443(CRC_14443_B, cmd1, 2, &cmd1[2], &cmd1[3]);\r
            CodeIso14443bAsReader(cmd1, sizeof(cmd1));\r
            TransmitFor14443();\r
 //         LED_A_ON();\r
            GetSamplesFor14443Demod(TRUE, 2000,TRUE);\r
-//         LED_A_OFF();
-           if (Demod.len != 6) { // Check if we got an answer from the tag
-               DbpString("Expected 6 bytes from tag, got less...");
-               return;
-           }
-           // The check the CRC of the answer (use cmd1 as temporary variable):
+//         LED_A_OFF();\r
+           if (Demod.len != 6) { // Check if we got an answer from the tag\r
+               DbpString("Expected 6 bytes from tag, got less...");\r
+               return;\r
+           }\r
+           // The check the CRC of the answer (use cmd1 as temporary variable):\r
            ComputeCrc14443(CRC_14443_B, Demod.output, 4, &cmd1[2], &cmd1[3]);\r
             if(cmd1[2] != Demod.output[4] || cmd1[3] != Demod.output[5]) {\r
-               DbpString("CRC Error reading block! - Below: expected, got");
-               DbpIntegers( (cmd1[2]<<8)+cmd1[3], (Demod.output[4]<<8)+Demod.output[5],0);
-               // Do not return;, let's go on... (we should retry, maybe ?)
-           }
-           // Now print out the memory location:
-           DbpString("Address , Contents, CRC");
-           DbpIntegers(i, (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0], (Demod.output[4]<<8)+Demod.output[5]);
-           if (i == 0xff) {
-               break;
-           }
-           i++;
-    }
+               DbpString("CRC Error reading block! - Below: expected, got");\r
+               DbpIntegers( (cmd1[2]<<8)+cmd1[3], (Demod.output[4]<<8)+Demod.output[5],0);\r
+               // Do not return;, let's go on... (we should retry, maybe ?)\r
+           }\r
+           // Now print out the memory location:\r
+           DbpString("Address , Contents, CRC");\r
+           DbpIntegers(i, (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0], (Demod.output[4]<<8)+Demod.output[5]);\r
+           if (i == 0xff) {\r
+               break;\r
+           }\r
+           i++;\r
+    }\r
 }\r
-
+\r
 \r
 //=============================================================================\r
 // Finally, the `sniffer' combines elements from both the reader and\r
@@ -1010,7 +1010,7 @@ void ReadSRI512Iso14443(DWORD parameter)
  * 0-1023 : Demodulated samples receive (1024 bytes)\r
  * 1024-1535 : Last Received command, 512 bytes (reader->tag)\r
  * 1536-2047 : Last Received command, 512 bytes(tag->reader)\r
- * 2048-2304 : DMA Buffer, 256 bytes (samples)
+ * 2048-2304 : DMA Buffer, 256 bytes (samples)\r
  */\r
 void SnoopIso14443(void)\r
 {\r
@@ -1069,7 +1069,7 @@ void SnoopIso14443(void)
     FpgaSetupSscDma((BYTE *)dmaBuf, DMA_BUFFER_SIZE);\r
     // And now we loop, receiving samples.\r
     for(;;) {\r
-       int behindBy = (lastRxCounter - PDC_RX_COUNTER(SSC_BASE)) &\r
+       int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) &\r
                                 (DMA_BUFFER_SIZE-1);\r
         if(behindBy > maxBehindBy) {\r
             maxBehindBy = behindBy;\r
@@ -1088,8 +1088,8 @@ void SnoopIso14443(void)
         if(upTo - dmaBuf > DMA_BUFFER_SIZE) {\r
             upTo -= DMA_BUFFER_SIZE;\r
             lastRxCounter += DMA_BUFFER_SIZE;\r
-            PDC_RX_NEXT_POINTER(SSC_BASE) = (DWORD) upTo;\r
-            PDC_RX_NEXT_COUNTER(SSC_BASE) = DMA_BUFFER_SIZE;\r
+            AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD) upTo;\r
+            AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;\r
         }\r
 \r
         samples += 2;\r
@@ -1169,5 +1169,5 @@ void SnoopIso14443(void)
 \r
 done:\r
        LED_D_OFF();\r
-    PDC_CONTROL(SSC_BASE) = PDC_RX_DISABLE;\r
+    AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;\r
 }\r
index 1571be0a760848fbb50ccfd102571034d20045e7..dbada07678f727f3ae801a200ee7dfe6c1544923 100644 (file)
@@ -583,7 +583,7 @@ void SnoopIso14443a(void)
     // And now we loop, receiving samples.\r
     for(;;) {\r
                WDT_HIT();\r
-        int behindBy = (lastRxCounter - PDC_RX_COUNTER(SSC_BASE)) &\r
+        int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) &\r
                                 (DMA_BUFFER_SIZE-1);\r
         if(behindBy > maxBehindBy) {\r
             maxBehindBy = behindBy;\r
@@ -600,8 +600,8 @@ void SnoopIso14443a(void)
         if(upTo - dmaBuf > DMA_BUFFER_SIZE) {\r
             upTo -= DMA_BUFFER_SIZE;\r
             lastRxCounter += DMA_BUFFER_SIZE;\r
-            PDC_RX_NEXT_POINTER(SSC_BASE) = (DWORD)upTo;\r
-            PDC_RX_NEXT_COUNTER(SSC_BASE) = DMA_BUFFER_SIZE;\r
+            AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD)upTo;\r
+            AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;\r
         }\r
 \r
         samples += 4;\r
@@ -672,7 +672,7 @@ void SnoopIso14443a(void)
     DbpIntegers(Uart.byteCntMax, traceLen, (int)Uart.output[0]);\r
 \r
 done:\r
-    PDC_CONTROL(SSC_BASE) = PDC_RX_DISABLE;\r
+    AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;\r
     DbpIntegers(maxBehindBy, Uart.state, Uart.byteCnt);\r
     DbpIntegers(Uart.byteCntMax, traceLen, (int)Uart.output[0]);\r
     LED_A_OFF();\r
@@ -857,11 +857,11 @@ static BOOL GetIso14443aCommandFromReader(BYTE *received, int *len, int maxLen)
 \r
         if(BUTTON_PRESS()) return FALSE;\r
 \r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = 0x00;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = 0x00;\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            BYTE b = (BYTE)SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            BYTE b = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
                        if(MillerDecoding((b & 0xf0) >> 4)) {\r
                                *len = Uart.byteCnt;\r
                                return TRUE;\r
@@ -1128,7 +1128,7 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
 \r
         // Modulate Manchester\r
                FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD);\r
-        SSC_TRANSMIT_HOLDING = 0x00;\r
+        AT91C_BASE_SSC->SSC_THR = 0x00;\r
         FpgaSetupSsc();\r
 \r
                // ### Transmit the response ###\r
@@ -1136,11 +1136,11 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
                b = 0x00;\r
                fdt_indicator = FALSE;\r
         for(;;) {\r
-            if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-                               volatile BYTE b = (BYTE)SSC_RECEIVE_HOLDING;\r
+            if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+                               volatile BYTE b = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
                 (void)b;\r
             }\r
-            if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
+            if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
                                if(i > respLen) {\r
                                        b = 0x00;\r
                                        u++;\r
@@ -1148,7 +1148,7 @@ ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
                                        b = resp[i];\r
                                        i++;\r
                                }\r
-                               SSC_TRANSMIT_HOLDING = b;\r
+                               AT91C_BASE_SSC->SSC_THR = b;\r
 \r
                 if(u > 4) {\r
                     break;\r
@@ -1177,12 +1177,12 @@ static void TransmitFor14443a(const BYTE *cmd, int len, int *samples, int *wait)
        if(*wait < 10) { *wait = 10; }\r
 \r
     for(c = 0; c < *wait;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = 0x00;               // For exact timing!\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = 0x00;            // For exact timing!\r
             c++;\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
             (void)r;\r
         }\r
         WDT_HIT();\r
@@ -1190,15 +1190,15 @@ static void TransmitFor14443a(const BYTE *cmd, int len, int *samples, int *wait)
 \r
     c = 0;\r
     for(;;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = cmd[c];\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = cmd[c];\r
             c++;\r
             if(c >= len) {\r
                 break;\r
             }\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
             (void)r;\r
         }\r
         WDT_HIT();\r
@@ -1454,13 +1454,13 @@ static BOOL GetIso14443aAnswerFromTag(BYTE *receivedResponse, int maxLen, int *s
        for(;;) {\r
         WDT_HIT();\r
 \r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = 0x00;  // To make use of exact timing of next command from reader!!\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = 0x00;  // To make use of exact timing of next command from reader!!\r
                        (*elapsed)++;\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
                        if(c < 512) { c++; } else { return FALSE; }\r
-            b = (BYTE)SSC_RECEIVE_HOLDING;\r
+            b = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
                        if(ManchesterDecoding((b & 0xf0) >> 4)) {\r
                                *samples = ((c - 1) << 3) + 4;\r
                                return TRUE;\r
index a80e6c6a06cb8d7ef0d17cfafbc9c6bcb8a472ac..723d297d11a7059288a2d1e524322f0128f21c14 100644 (file)
@@ -478,12 +478,12 @@ static void TransmitTo15693Tag(const BYTE *cmd, int len, int *samples, int *wait
        if(*wait < 10) { *wait = 10; }\r
 \r
 //    for(c = 0; c < *wait;) {\r
-//        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-//            SSC_TRANSMIT_HOLDING = 0x00;             // For exact timing!\r
+//        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+//            AT91C_BASE_SSC->SSC_THR = 0x00;          // For exact timing!\r
 //            c++;\r
 //        }\r
-//        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-//            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+//        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+//            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
 //            (void)r;\r
 //        }\r
 //        WDT_HIT();\r
@@ -491,15 +491,15 @@ static void TransmitTo15693Tag(const BYTE *cmd, int len, int *samples, int *wait
 \r
     c = 0;\r
     for(;;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = cmd[c];\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = cmd[c];\r
             c++;\r
             if(c >= len) {\r
                 break;\r
             }\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
             (void)r;\r
         }\r
         WDT_HIT();\r
@@ -520,15 +520,15 @@ static void TransmitTo15693Reader(const BYTE *cmd, int len, int *samples, int *w
 \r
     c = 0;\r
     for(;;) {\r
-        if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-            SSC_TRANSMIT_HOLDING = cmd[c];\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+            AT91C_BASE_SSC->SSC_THR = cmd[c];\r
             c++;\r
             if(c >= len) {\r
                 break;\r
             }\r
         }\r
-        if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-            volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+        if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+            volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
             (void)r;\r
         }\r
         WDT_HIT();\r
@@ -550,12 +550,12 @@ static int GetIso15693AnswerFromTag(BYTE *receivedResponse, int maxLen, int *sam
        c = 0;\r
        getNext = FALSE;\r
        for(;;) {\r
-               if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-                       SSC_TRANSMIT_HOLDING = 0x43;\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                       AT91C_BASE_SSC->SSC_THR = 0x43;\r
                }\r
-               if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
                        SBYTE b;\r
-                       b = (SBYTE)SSC_RECEIVE_HOLDING;\r
+                       b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;\r
 \r
                        // The samples are correlations against I and Q versions of the\r
                        // tone that the tag AM-modulates, so every other sample is I,\r
@@ -697,12 +697,12 @@ static int GetIso15693AnswerFromSniff(BYTE *receivedResponse, int maxLen, int *s
        c = 0;\r
        getNext = FALSE;\r
        for(;;) {\r
-               if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-                       SSC_TRANSMIT_HOLDING = 0x43;\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                       AT91C_BASE_SSC->SSC_THR = 0x43;\r
                }\r
-               if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
                        SBYTE b;\r
-                       b = (SBYTE)SSC_RECEIVE_HOLDING;\r
+                       b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;\r
 \r
                        // The samples are correlations against I and Q versions of the\r
                        // tone that the tag AM-modulates, so every other sample is I,\r
@@ -855,15 +855,15 @@ void AcquireRawAdcSamplesIso15693(void)
 \r
        c = 0;\r
        for(;;) {\r
-               if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-                       SSC_TRANSMIT_HOLDING = ToSend[c];\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                       AT91C_BASE_SSC->SSC_THR = ToSend[c];\r
                        c++;\r
                        if(c == ToSendMax+3) {\r
                                break;\r
                        }\r
                }\r
-               if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-                       volatile DWORD r = SSC_RECEIVE_HOLDING;\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+                       volatile DWORD r = AT91C_BASE_SSC->SSC_RHR;\r
                        (void)r;\r
                }\r
                WDT_HIT();\r
@@ -874,12 +874,12 @@ void AcquireRawAdcSamplesIso15693(void)
        c = 0;\r
        getNext = FALSE;\r
        for(;;) {\r
-               if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-                       SSC_TRANSMIT_HOLDING = 0x43;\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                       AT91C_BASE_SSC->SSC_THR = 0x43;\r
                }\r
-               if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
                        SBYTE b;\r
-                       b = (SBYTE)SSC_RECEIVE_HOLDING;\r
+                       b = (SBYTE)AT91C_BASE_SSC->SSC_RHR;\r
 \r
                        // The samples are correlations against I and Q versions of the\r
                        // tone that the tag AM-modulates, so every other sample is I,\r
index 8ad25ce092dc74a1a3d03b542e3315b8032e5c3c..c2d908dfebb55cf06b8b14cfec36c4f3496d7741 100644 (file)
@@ -42,12 +42,12 @@ void DoAcquisition125k(BOOL at134khz)
        memset(dest,0,n);\r
        i = 0;\r
        for(;;) {\r
-               if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-                       SSC_TRANSMIT_HOLDING = 0x43;\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                       AT91C_BASE_SSC->SSC_THR = 0x43;\r
                        LED_D_ON();\r
                }\r
-               if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-                       dest[i] = (BYTE)SSC_RECEIVE_HOLDING;\r
+               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+                       dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
                        i++;\r
                        LED_D_OFF();\r
                        if(i >= n) {\r
@@ -274,17 +274,17 @@ void WriteTIbyte(BYTE b)
        {\r
                if (b&(1<<i)) {\r
                        // stop modulating antenna\r
-                       PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_SSC_DOUT);\r
+                       LOW(GPIO_SSC_DOUT);\r
                        SpinDelayUs(1000);\r
                        // modulate antenna\r
-                       PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);\r
+                       HIGH(GPIO_SSC_DOUT);\r
                        SpinDelayUs(1000);\r
                } else {\r
                        // stop modulating antenna\r
-                       PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_SSC_DOUT);\r
+                       LOW(GPIO_SSC_DOUT);\r
                        SpinDelayUs(300);\r
                        // modulate antenna\r
-                       PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);\r
+                       HIGH(GPIO_SSC_DOUT);\r
                        SpinDelayUs(1700);\r
                }\r
        }\r
@@ -301,50 +301,50 @@ void AcquireTiType(void)
        memset(BigBuf,0,sizeof(BigBuf));\r
 \r
        // Set up the synchronous serial port\r
-  PIO_DISABLE = (1<<GPIO_SSC_DIN);\r
-  PIO_PERIPHERAL_A_SEL = (1<<GPIO_SSC_DIN);\r
+       AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;\r
+       AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;\r
 \r
        // steal this pin from the SSP and use it to control the modulation\r
-  PIO_ENABLE = (1<<GPIO_SSC_DOUT);\r
-       PIO_OUTPUT_ENABLE       = (1<<GPIO_SSC_DOUT);\r
+       AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;\r
+       AT91C_BASE_PIOA->PIO_OER        = GPIO_SSC_DOUT;\r
 \r
-  SSC_CONTROL = SSC_CONTROL_RESET;\r
-  SSC_CONTROL = SSC_CONTROL_RX_ENABLE | SSC_CONTROL_TX_ENABLE;\r
+       AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;\r
+       AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;\r
 \r
-  // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long\r
-  // 48/2 = 24 MHz clock must be divided by 12\r
-  SSC_CLOCK_DIVISOR = 12;\r
+       // Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long\r
+       // 48/2 = 24 MHz clock must be divided by 12\r
+       AT91C_BASE_SSC->SSC_CMR = 12;\r
 \r
-  SSC_RECEIVE_CLOCK_MODE = SSC_CLOCK_MODE_SELECT(0);\r
-       SSC_RECEIVE_FRAME_MODE = SSC_FRAME_MODE_BITS_IN_WORD(32) | SSC_FRAME_MODE_MSB_FIRST;\r
-       SSC_TRANSMIT_CLOCK_MODE = 0;\r
-       SSC_TRANSMIT_FRAME_MODE = 0;\r
+       AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);\r
+       AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;\r
+       AT91C_BASE_SSC->SSC_TCMR = 0;\r
+       AT91C_BASE_SSC->SSC_TFMR = 0;\r
 \r
        LED_D_ON();\r
 \r
        // modulate antenna\r
-       PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);\r
+       HIGH(GPIO_SSC_DOUT);\r
 \r
        // Charge TI tag for 50ms.\r
        SpinDelay(50);\r
 \r
        // stop modulating antenna and listen\r
-       PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_SSC_DOUT);\r
+       LOW(GPIO_SSC_DOUT);\r
 \r
        LED_D_OFF();\r
 \r
        i = 0;\r
        for(;;) {\r
-                       if(SSC_STATUS & SSC_STATUS_RX_READY) {\r
-                                       BigBuf[i] = SSC_RECEIVE_HOLDING;        // store 32 bit values in buffer\r
-                                       i++; if(i >= TIBUFLEN) break;\r
-                       }\r
-                       WDT_HIT();\r
+               if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {\r
+                       BigBuf[i] = AT91C_BASE_SSC->SSC_RHR;    // store 32 bit values in buffer\r
+                       i++; if(i >= TIBUFLEN) break;\r
+               }\r
+               WDT_HIT();\r
        }\r
 \r
        // return stolen pin to SSP\r
-       PIO_DISABLE = (1<<GPIO_SSC_DOUT);\r
-       PIO_PERIPHERAL_A_SEL = (1<<GPIO_SSC_DIN) | (1<<GPIO_SSC_DOUT);\r
+       AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;\r
+       AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;\r
 \r
        char *dest = (char *)BigBuf;\r
        n = TIBUFLEN*32;\r
@@ -394,8 +394,8 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
        LED_A_ON();\r
 \r
        // steal this pin from the SSP and use it to control the modulation\r
-  PIO_ENABLE = (1<<GPIO_SSC_DOUT);\r
-       PIO_OUTPUT_ENABLE       = (1<<GPIO_SSC_DOUT);\r
+       AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;\r
+       AT91C_BASE_PIOA->PIO_OER        = GPIO_SSC_DOUT;\r
 \r
        // writing algorithm:\r
        // a high bit consists of a field off for 1ms and field on for 1ms\r
@@ -408,7 +408,7 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
        // finish with 15ms programming time\r
 \r
        // modulate antenna\r
-       PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);\r
+       HIGH(GPIO_SSC_DOUT);\r
        SpinDelay(50);  // charge time\r
 \r
        WriteTIbyte(0xbb); // keyword\r
@@ -425,7 +425,7 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
        WriteTIbyte( (crc>>8  )&0xff ); // crc hi\r
        WriteTIbyte(0x00); // write frame lo\r
        WriteTIbyte(0x03); // write frame hi\r
-       PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);\r
+       HIGH(GPIO_SSC_DOUT);\r
        SpinDelay(50);  // programming time\r
 \r
        LED_A_OFF();\r
@@ -444,17 +444,17 @@ void SimulateTagLowFrequency(int period, int ledcontrol)
 \r
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR);\r
 \r
-       PIO_ENABLE = (1 << GPIO_SSC_DOUT) | (1 << GPIO_SSC_CLK);\r
+       AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;\r
 \r
-       PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT);\r
-       PIO_OUTPUT_DISABLE = (1 << GPIO_SSC_CLK);\r
+       AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;\r
+       AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;\r
 \r
 #define SHORT_COIL()   LOW(GPIO_SSC_DOUT)\r
-#define OPEN_COIL()    HIGH(GPIO_SSC_DOUT)\r
+#define OPEN_COIL()            HIGH(GPIO_SSC_DOUT)\r
 \r
        i = 0;\r
        for(;;) {\r
-               while(!(PIO_PIN_DATA_STATUS & (1<<GPIO_SSC_CLK))) {\r
+               while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {\r
                        if(BUTTON_PRESS()) {\r
                                DbpString("Stopped");\r
                                return;\r
@@ -473,7 +473,7 @@ void SimulateTagLowFrequency(int period, int ledcontrol)
                if (ledcontrol)\r
                        LED_D_OFF();\r
 \r
-               while(PIO_PIN_DATA_STATUS & (1<<GPIO_SSC_CLK)) {\r
+               while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {\r
                        if(BUTTON_PRESS()) {\r
                                DbpString("Stopped");\r
                                return;\r
@@ -529,7 +529,7 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
        hitag2_init();\r
        \r
        /* Set up simulator mode, frequency divisor which will drive the FPGA\r
-        * and analog mux selection.
+        * and analog mux selection.\r
         */\r
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR);\r
        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);\r
@@ -539,15 +539,19 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
        /* Set up Timer 1:\r
         * Capture mode, timer source MCK/2 (TIMER_CLOCK1), TIOA is external trigger,\r
         * external trigger rising edge, load RA on rising edge of TIOA, load RB on rising\r
-        * edge of TIOA. Assign PA15 to TIOA1 (peripheral B)
+        * edge of TIOA. Assign PA15 to TIOA1 (peripheral B)\r
         */\r
        \r
-       PMC_PERIPHERAL_CLK_ENABLE = (1 << PERIPH_TC1);\r
-       PIO_PERIPHERAL_B_SEL = (1 << GPIO_SSC_FRAME);\r
-       TC1_CCR = TC_CCR_CLKDIS;\r
-       TC1_CMR = TC_CMR_TCCLKS_TIMER_CLOCK1 | TC_CMR_ETRGEDG_RISING | TC_CMR_ABETRG |\r
-               TC_CMR_LDRA_RISING | TC_CMR_LDRB_RISING;\r
-       TC1_CCR = TC_CCR_CLKEN | TC_CCR_SWTRG;\r
+       AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);\r
+       AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;\r
+       AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;\r
+       AT91C_BASE_TC1->TC_CMR =        TC_CMR_TCCLKS_TIMER_CLOCK1 |\r
+                                                               AT91C_TC_ETRGEDG_RISING |\r
+                                                               AT91C_TC_ABETRG |\r
+                                                               AT91C_TC_LDRA_RISING |\r
+                                                               AT91C_TC_LDRB_RISING;\r
+       AT91C_BASE_TC1->TC_CCR =        AT91C_TC_CLKEN |\r
+                                                               AT91C_TC_SWTRG;\r
        \r
        /* calculate the new value for the carrier period in terms of TC1 values */\r
        t0 = t0/2;\r
@@ -555,8 +559,8 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
        int overflow = 0;\r
        while(!BUTTON_PRESS()) {\r
                WDT_HIT();\r
-               if(TC1_SR & TC_SR_LDRAS) {\r
-                       int ra = TC1_RA;\r
+               if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {\r
+                       int ra = AT91C_BASE_TC1->TC_RA;\r
                        if((ra > t0*HITAG_T_EOF) | overflow) ra = t0*HITAG_T_EOF+1;\r
 #if DEBUG_RA_VALUES\r
                        if(ra > 255 || overflow) ra = 255;\r
@@ -583,14 +587,14 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
                        overflow = 0;\r
                        LED_D_ON();\r
                } else {\r
-                       if(TC1_CV > t0*HITAG_T_EOF) {\r
+                       if(AT91C_BASE_TC1->TC_CV > t0*HITAG_T_EOF) {\r
                                /* Minor nuisance: In Capture mode, the timer can not be\r
                                 * stopped by a Compare C. There's no way to stop the clock\r
                                 * in software, so we'll just have to note the fact that an\r
                                 * overflow happened and the next loaded timer value might\r
                                 * have wrapped. Also, this marks the end of frame, and the\r
                                 * still running counter can be used to determine the correct\r
-                                * time for the start of the reply.
+                                * time for the start of the reply.\r
                                 */ \r
                                overflow = 1;\r
                                \r
@@ -619,37 +623,37 @@ static void hitag_send_bit(int t0, int bit) {
                /* Manchester: Loaded, then unloaded */\r
                LED_A_ON();\r
                SHORT_COIL();\r
-               while(TC1_CV < t0*15);\r
+               while(AT91C_BASE_TC1->TC_CV < t0*15);\r
                OPEN_COIL();\r
-               while(TC1_CV < t0*31);\r
+               while(AT91C_BASE_TC1->TC_CV < t0*31);\r
                LED_A_OFF();\r
        } else if(bit == 0) {\r
                /* Manchester: Unloaded, then loaded */\r
                LED_B_ON();\r
                OPEN_COIL();\r
-               while(TC1_CV < t0*15);\r
+               while(AT91C_BASE_TC1->TC_CV < t0*15);\r
                SHORT_COIL();\r
-               while(TC1_CV < t0*31);\r
+               while(AT91C_BASE_TC1->TC_CV < t0*31);\r
                LED_B_OFF();\r
        }\r
-       TC1_CCR = TC_CCR_SWTRG; /* Reset clock for the next bit */\r
+       AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; /* Reset clock for the next bit */\r
        \r
 }\r
 static void hitag_send_frame(int t0, int frame_len, const char const * frame, int fdt)\r
 {\r
        OPEN_COIL();\r
-       PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT);\r
+       AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;\r
        \r
        /* Wait for HITAG_T_WRESP carrier periods after the last reader bit,\r
         * not that since the clock counts since the rising edge, but T_wresp is\r
         * with respect to the falling edge, we need to wait actually (T_wresp - T_g)\r
-        * periods. The gap time T_g varies (4..10).
+        * periods. The gap time T_g varies (4..10).\r
         */\r
-       while(TC1_CV < t0*(fdt-8));\r
+       while(AT91C_BASE_TC1->TC_CV < t0*(fdt-8));\r
 \r
-       int saved_cmr = TC1_CMR;\r
-       TC1_CMR &= ~TC_CMR_ETRGEDG; /* Disable external trigger for the clock */\r
-       TC1_CCR = TC_CCR_SWTRG; /* Reset the clock and use it for response timing */\r
+       int saved_cmr = AT91C_BASE_TC1->TC_CMR;\r
+       AT91C_BASE_TC1->TC_CMR &= ~AT91C_TC_ETRGEDG; /* Disable external trigger for the clock */\r
+       AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; /* Reset the clock and use it for response timing */\r
        \r
        int i;\r
        for(i=0; i<5; i++)\r
@@ -660,7 +664,7 @@ static void hitag_send_frame(int t0, int frame_len, const char const * frame, in
        }\r
        \r
        OPEN_COIL();\r
-       TC1_CMR = saved_cmr;\r
+       AT91C_BASE_TC1->TC_CMR = saved_cmr;\r
 }\r
 \r
 /* Callback structure to cleanly separate tag emulation code from the radio layer. */\r
@@ -813,13 +817,13 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
                m = sizeof(BigBuf);\r
                memset(dest,128,m);\r
                for(;;) {\r
-                       if(SSC_STATUS & (SSC_STATUS_TX_READY)) {\r
-                               SSC_TRANSMIT_HOLDING = 0x43;\r
+                       if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {\r
+                               AT91C_BASE_SSC->SSC_THR = 0x43;\r
                                if (ledcontrol)\r
                                        LED_D_ON();\r
                        }\r
-                       if(SSC_STATUS & (SSC_STATUS_RX_READY)) {\r
-                               dest[i] = (BYTE)SSC_RECEIVE_HOLDING;\r
+                       if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {\r
+                               dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR;\r
                                // we don't care about actual value, only if it's more or less than a\r
                                // threshold essentially we capture zero crossings for later analysis\r
                                if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;\r
index 650ba22bacb31914c142ffeee9a0a882c940fb3b..3cad25f438928d4ffc464b8b7e29c09777eda665 100644 (file)
@@ -115,18 +115,18 @@ int BUTTON_CLICKED(int ms)
                return BUTTON_NO_CLICK;\r
 \r
        // Borrow a PWM unit for my real-time clock\r
-       PWM_ENABLE = PWM_CHANNEL(0);\r
+       AT91C_BASE_PWMC->PWMC_ENA = PWM_CHANNEL(0);\r
        // 48 MHz / 1024 gives 46.875 kHz\r
-       PWM_CH_MODE(0) = PWM_CH_MODE_PRESCALER(10);\r
-       PWM_CH_DUTY_CYCLE(0) = 0;\r
-       PWM_CH_PERIOD(0) = 0xffff;\r
+       AT91C_BASE_PWMC_CH0->PWMC_CMR = PWM_CH_MODE_PRESCALER(10);\r
+       AT91C_BASE_PWMC_CH0->PWMC_CDTYR = 0;\r
+       AT91C_BASE_PWMC_CH0->PWMC_CPRDR = 0xffff;\r
 \r
-       WORD start = (WORD)PWM_CH_COUNTER(0);\r
+       WORD start = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
 \r
        int letoff = 0;\r
        for(;;)\r
        {\r
-               WORD now = (WORD)PWM_CH_COUNTER(0);\r
+               WORD now = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
 \r
                // We haven't let off the button yet\r
                if (!letoff)\r
@@ -137,7 +137,7 @@ int BUTTON_CLICKED(int ms)
                                letoff = 1;\r
 \r
                                // reset our timer for 500ms\r
-                               start = (WORD)PWM_CH_COUNTER(0);\r
+                               start = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
                                ticks = (48000 * (500)) >> 10;\r
                        }\r
 \r
@@ -178,17 +178,17 @@ int BUTTON_HELD(int ms)
                return BUTTON_NO_CLICK;\r
 \r
        // Borrow a PWM unit for my real-time clock\r
-       PWM_ENABLE = PWM_CHANNEL(0);\r
+       AT91C_BASE_PWMC->PWMC_ENA = PWM_CHANNEL(0);\r
        // 48 MHz / 1024 gives 46.875 kHz\r
-       PWM_CH_MODE(0) = PWM_CH_MODE_PRESCALER(10);\r
-       PWM_CH_DUTY_CYCLE(0) = 0;\r
-       PWM_CH_PERIOD(0) = 0xffff;\r
+       AT91C_BASE_PWMC_CH0->PWMC_CMR = PWM_CH_MODE_PRESCALER(10);\r
+       AT91C_BASE_PWMC_CH0->PWMC_CDTYR = 0;\r
+       AT91C_BASE_PWMC_CH0->PWMC_CPRDR = 0xffff;\r
 \r
-       WORD start = (WORD)PWM_CH_COUNTER(0);\r
+       WORD start = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
 \r
        for(;;)\r
        {\r
-               WORD now = (WORD)PWM_CH_COUNTER(0);\r
+               WORD now = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
 \r
                // As soon as our button let go, we didn't hold long enough\r
                if (!BUTTON_PRESS())\r
@@ -213,16 +213,16 @@ void SpinDelayUs(int us)
        int ticks = (48*us) >> 10;\r
 \r
        // Borrow a PWM unit for my real-time clock\r
-       PWM_ENABLE = PWM_CHANNEL(0);\r
+       AT91C_BASE_PWMC->PWMC_ENA = PWM_CHANNEL(0);\r
        // 48 MHz / 1024 gives 46.875 kHz\r
-       PWM_CH_MODE(0) = PWM_CH_MODE_PRESCALER(10);\r
-       PWM_CH_DUTY_CYCLE(0) = 0;\r
-       PWM_CH_PERIOD(0) = 0xffff;\r
+       AT91C_BASE_PWMC_CH0->PWMC_CMR = PWM_CH_MODE_PRESCALER(10);\r
+       AT91C_BASE_PWMC_CH0->PWMC_CDTYR = 0;\r
+       AT91C_BASE_PWMC_CH0->PWMC_CPRDR = 0xffff;\r
 \r
-       WORD start = (WORD)PWM_CH_COUNTER(0);\r
+       WORD start = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
 \r
        for(;;) {\r
-               WORD now = (WORD)PWM_CH_COUNTER(0);\r
+               WORD now = AT91C_BASE_PWMC_CH0->PWMC_CCNTR;\r
                if (now == (WORD)(start + ticks))\r
                        return;\r
 \r
@@ -239,7 +239,7 @@ void SpinDelay(int ms)
 /* Similar to FpgaGatherVersion this formats stored version information\r
  * into a string representation. It takes a pointer to the struct version_information,\r
  * verifies the magic properties, then stores a formatted string, prefixed by\r
- * prefix in dst.
+ * prefix in dst.\r
  */\r
 void FormatVersionInformation(char *dst, int len, const char *prefix, void *version_information)\r
 {\r
index c8c695cc9f6c097b4b7b4f70771ff02711e0c7b6..7b29ad97955cd1d5342b6151764ad2034f7b9ff4 100644 (file)
@@ -1,7 +1,7 @@
 #include <proxmark3.h>\r
 \r
 struct common_area common_area __attribute__((section(".commonarea")));\r
-unsigned int start_addr, end_addr, bootrom_unlocked; \r
+unsigned int start_addr, end_addr, bootrom_unlocked;\r
 extern char _bootrom_start, _bootrom_end, _flash_start, _flash_end;\r
 \r
 static void ConfigClocks(void)\r
@@ -10,53 +10,57 @@ static void ConfigClocks(void)
     // slow clock runs at 32Khz typical regardless of crystal\r
 \r
     // enable system clock and USB clock\r
-    PMC_SYS_CLK_ENABLE = PMC_SYS_CLK_PROCESSOR_CLK | PMC_SYS_CLK_UDP_CLK;\r
+    AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK | AT91C_PMC_UDP;\r
 \r
        // enable the clock to the following peripherals\r
-    PMC_PERIPHERAL_CLK_ENABLE =\r
-        (1<<PERIPH_PIOA) |\r
-        (1<<PERIPH_ADC) |\r
-        (1<<PERIPH_SPI) |\r
-        (1<<PERIPH_SSC) |\r
-        (1<<PERIPH_PWMC) |\r
-        (1<<PERIPH_UDP);\r
+    AT91C_BASE_PMC->PMC_PCER =\r
+               (1<<AT91C_ID_PIOA)      |\r
+               (1<<AT91C_ID_ADC)       |\r
+               (1<<AT91C_ID_SPI)       |\r
+               (1<<AT91C_ID_SSC)       |\r
+               (1<<AT91C_ID_PWMC)      |\r
+               (1<<AT91C_ID_UDP);\r
 \r
        // worst case scenario, with 16Mhz xtal startup delay is 14.5ms\r
        // with a slow clock running at it worst case (max) frequency of 42khz\r
        // max startup delay = (14.5ms*42k)/8 = 76 = 0x4C round up to 0x50\r
 \r
        // enable main oscillator and set startup delay\r
-    PMC_MAIN_OSCILLATOR = PMC_MAIN_OSCILLATOR_ENABLE |\r
-        PMC_MAIN_OSCILLATOR_STARTUP_DELAY(0x50);\r
+    AT91C_BASE_PMC->PMC_MOR =\r
+       PMC_MAIN_OSC_ENABLE |\r
+        PMC_MAIN_OSC_STARTUP_DELAY(0x50);\r
 \r
        // wait for main oscillator to stabilize\r
-       while ( !(PMC_INTERRUPT_STATUS & PMC_MAIN_OSCILLATOR_STABILIZED) )\r
+       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_STABILIZED) )\r
                ;\r
 \r
     // minimum PLL clock frequency is 80 MHz in range 00 (96 here so okay)\r
     // frequency is crystal * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz\r
-    PMC_PLL = PMC_PLL_DIVISOR(2) | PMC_PLL_COUNT_BEFORE_LOCK(0x50) |\r
-        PMC_PLL_FREQUENCY_RANGE(0) | PMC_PLL_MULTIPLIER(12) |\r
-        PMC_PLL_USB_DIVISOR(1);\r
+    AT91C_BASE_PMC->PMC_PLLR =\r
+       PMC_PLL_DIVISOR(2) |\r
+               PMC_PLL_COUNT_BEFORE_LOCK(0x50) |\r
+               PMC_PLL_FREQUENCY_RANGE(0) |\r
+               PMC_PLL_MULTIPLIER(12) |\r
+               PMC_PLL_USB_DIVISOR(1);\r
 \r
        // wait for PLL to lock\r
-       while ( !(PMC_INTERRUPT_STATUS & PMC_MAIN_OSCILLATOR_PLL_LOCK) )\r
+       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_PLL_LOCK) )\r
                ;\r
 \r
        // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz\r
        // as per datasheet, this register must be programmed in two operations\r
        // when changing to PLL, program the prescaler first then the source\r
-    PMC_MASTER_CLK = PMC_CLK_PRESCALE_DIV_2;\r
+    AT91C_BASE_PMC->PMC_MCKR = PMC_CLK_PRESCALE_DIV_2;\r
 \r
        // wait for main clock ready signal\r
-       while ( !(PMC_INTERRUPT_STATUS & PMC_MAIN_OSCILLATOR_MCK_READY) )\r
+       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) )\r
                ;\r
 \r
        // set the source to PLL\r
-    PMC_MASTER_CLK = PMC_CLK_SELECTION_PLL_CLOCK | PMC_CLK_PRESCALE_DIV_2;\r
+    AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | PMC_CLK_PRESCALE_DIV_2;\r
 \r
        // wait for main clock ready signal\r
-       while ( !(PMC_INTERRUPT_STATUS & PMC_MAIN_OSCILLATOR_MCK_READY) )\r
+       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) )\r
                ;\r
 }\r
 \r
@@ -79,7 +83,7 @@ void UsbPacketReceived(BYTE *packet, int len)
         case CMD_DEVICE_INFO:\r
             dont_ack = 1;\r
             c->cmd = CMD_DEVICE_INFO;\r
-            c->ext1 = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM | \r
+            c->ext1 = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM |\r
                 DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH;\r
             if(common_area.flags.osimage_present) c->ext1 |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT;\r
             UsbSendPacket(packet, len);\r
@@ -87,7 +91,7 @@ void UsbPacketReceived(BYTE *packet, int len)
 \r
         case CMD_SETUP_WRITE:\r
             /* The temporary write buffer of the embedded flash controller is mapped to the\r
-             * whole memory region, only the last 8 bits are decoded.
+             * whole memory region, only the last 8 bits are decoded.\r
              */\r
             p = (volatile DWORD *)&_flash_start;\r
             for(i = 0; i < 12; i++) {\r
@@ -102,26 +106,26 @@ void UsbPacketReceived(BYTE *packet, int len)
             }\r
 \r
             /* Check that the address that we are supposed to write to is within our allowed region */\r
-            if( ((c->ext1+FLASH_PAGE_SIZE_BYTES-1) >= end_addr) || (c->ext1 < start_addr) ) {\r
+            if( ((c->ext1+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (c->ext1 < start_addr) ) {\r
                 /* Disallow write */\r
                 dont_ack = 1;\r
                 c->cmd = CMD_NACK;\r
                 UsbSendPacket(packet, len);\r
             } else {\r
                 /* Translate address to flash page and do flash, update here for the 512k part */\r
-                MC_FLASH_COMMAND = MC_FLASH_COMMAND_KEY |\r
-                    MC_FLASH_COMMAND_PAGEN((c->ext1-(int)&_flash_start)/FLASH_PAGE_SIZE_BYTES) |\r
-                    FCMD_WRITE_PAGE;\r
+                AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY |\r
+                    MC_FLASH_COMMAND_PAGEN((c->ext1-(int)&_flash_start)/AT91C_IFLASH_PAGE_SIZE) |\r
+                    AT91C_MC_FCMD_START_PROG;\r
             }\r
-            while(!(MC_FLASH_STATUS & MC_FLASH_STATUS_READY))\r
+            while(!(AT91C_BASE_EFC0->EFC_FSR & MC_FLASH_STATUS_READY))\r
                 ;\r
             break;\r
 \r
         case CMD_HARDWARE_RESET:\r
             USB_D_PLUS_PULLUP_OFF();\r
-            RSTC_CONTROL = RST_CONTROL_KEY | RST_CONTROL_PROCESSOR_RESET;\r
+            AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;\r
             break;\r
-        \r
+\r
         case CMD_START_FLASH:\r
             if(c->ext3 == START_FLASH_MAGIC) bootrom_unlocked = 1;\r
             else bootrom_unlocked = 0;\r
@@ -132,9 +136,9 @@ void UsbPacketReceived(BYTE *packet, int len)
                 int allow_end = (int)&_flash_end;\r
                 int cmd_start = c->ext1;\r
                 int cmd_end = c->ext2;\r
-                \r
+\r
                 /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected\r
-                 * bootrom area. In any case they must be within the flash area.
+                 * bootrom area. In any case they must be within the flash area.\r
                  */\r
                 if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start)))\r
                     && (cmd_start >= allow_start) && (cmd_end <= allow_end) ) {\r
@@ -148,7 +152,7 @@ void UsbPacketReceived(BYTE *packet, int len)
                 }\r
             }\r
             break;\r
-        \r
+\r
         default:\r
             Fatal();\r
             break;\r
@@ -165,18 +169,18 @@ static void flash_mode(int externally_entered)
        start_addr = 0;\r
        end_addr = 0;\r
        bootrom_unlocked = 0;\r
-       \r
+\r
        UsbStart();\r
        for(;;) {\r
                WDT_HIT();\r
-               \r
+\r
                UsbPoll(TRUE);\r
-               \r
+\r
                if(!externally_entered && !BUTTON_PRESS()) {\r
                        /* Perform a reset to leave flash mode */\r
                        USB_D_PLUS_PULLUP_OFF();\r
                        LED_B_ON();\r
-                       RSTC_CONTROL = RST_CONTROL_KEY | RST_CONTROL_PROCESSOR_RESET;\r
+                       AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;\r
                        for(;;);\r
                }\r
                if(externally_entered && BUTTON_PRESS()) {\r
@@ -195,65 +199,71 @@ void BootROM(void)
 \r
     // Kill all the pullups, especially the one on USB D+; leave them for\r
     // the unused pins, though.\r
-    PIO_NO_PULL_UP_ENABLE =     (1 << GPIO_USB_PU)          |\r
-                                (1 << GPIO_LED_A)           |\r
-                                (1 << GPIO_LED_B)           |\r
-                                (1 << GPIO_LED_C)           |\r
-                                (1 << GPIO_LED_D)           |\r
-                                (1 << GPIO_FPGA_DIN)        |\r
-                                (1 << GPIO_FPGA_DOUT)       |\r
-                                (1 << GPIO_FPGA_CCLK)       |\r
-                                (1 << GPIO_FPGA_NINIT)      |\r
-                                (1 << GPIO_FPGA_NPROGRAM)   |\r
-                                (1 << GPIO_FPGA_DONE)       |\r
-                                (1 << GPIO_MUXSEL_HIPKD)    |\r
-                                (1 << GPIO_MUXSEL_HIRAW)    |\r
-                                (1 << GPIO_MUXSEL_LOPKD)    |\r
-                                (1 << GPIO_MUXSEL_LORAW)    |\r
-                                (1 << GPIO_RELAY)              |\r
-                                (1 << GPIO_NVDD_ON);\r
-                                // (and add GPIO_FPGA_ON)\r
+    AT91C_BASE_PIOA->PIO_PPUDR =\r
+       GPIO_USB_PU                     |\r
+               GPIO_LED_A                      |\r
+               GPIO_LED_B                      |\r
+               GPIO_LED_C                      |\r
+               GPIO_LED_D                      |\r
+               GPIO_FPGA_DIN           |\r
+               GPIO_FPGA_DOUT          |\r
+               GPIO_FPGA_CCLK          |\r
+               GPIO_FPGA_NINIT         |\r
+               GPIO_FPGA_NPROGRAM      |\r
+               GPIO_FPGA_DONE          |\r
+               GPIO_MUXSEL_HIPKD       |\r
+               GPIO_MUXSEL_HIRAW       |\r
+               GPIO_MUXSEL_LOPKD       |\r
+               GPIO_MUXSEL_LORAW       |\r
+               GPIO_RELAY                      |\r
+               GPIO_NVDD_ON;\r
+               // (and add GPIO_FPGA_ON)\r
        // These pins are outputs\r
-    PIO_OUTPUT_ENABLE =         (1 << GPIO_LED_A)           |\r
-                                (1 << GPIO_LED_B)           |\r
-                                (1 << GPIO_LED_C)           |\r
-                                (1 << GPIO_LED_D)           |\r
-                                (1 << GPIO_RELAY)              |\r
-                                (1 << GPIO_NVDD_ON);\r
+    AT91C_BASE_PIOA->PIO_OER =\r
+       GPIO_LED_A                      |\r
+               GPIO_LED_B                      |\r
+               GPIO_LED_C                      |\r
+               GPIO_LED_D                      |\r
+               GPIO_RELAY                      |\r
+               GPIO_NVDD_ON;\r
        // PIO controls the following pins\r
-    PIO_ENABLE =                (1 << GPIO_USB_PU)          |\r
-                                (1 << GPIO_LED_A)           |\r
-                                (1 << GPIO_LED_B)           |\r
-                                (1 << GPIO_LED_C)           |\r
-                                (1 << GPIO_LED_D);\r
+    AT91C_BASE_PIOA->PIO_PER =\r
+       GPIO_USB_PU                     |\r
+               GPIO_LED_A                      |\r
+               GPIO_LED_B                      |\r
+               GPIO_LED_C                      |\r
+               GPIO_LED_D;\r
 \r
     USB_D_PLUS_PULLUP_OFF();\r
     LED_D_OFF();\r
     LED_C_ON();\r
     LED_B_OFF();\r
     LED_A_OFF();\r
-    \r
+\r
     // if 512K FLASH part - TODO make some defines :)\r
-    if ((DBGU_CIDR | 0xf00) == 0xa00) {\r
-           MC_FLASH_MODE0 = MC_FLASH_MODE_FLASH_WAIT_STATES(1) |\r
-           MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);\r
-           MC_FLASH_MODE1 = MC_FLASH_MODE_FLASH_WAIT_STATES(1) |\r
-           MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);\r
+    if ((AT91C_BASE_DBGU->DBGU_CIDR | 0xf00) == 0xa00) {\r
+           AT91C_BASE_EFC0->EFC_FMR =\r
+               MC_FLASH_MODE_FLASH_WAIT_STATES(1) |\r
+                       MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);\r
+           AT91C_BASE_EFC1->EFC_FMR =\r
+               MC_FLASH_MODE_FLASH_WAIT_STATES(1) |\r
+                       MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);\r
     } else {\r
-           MC_FLASH_MODE0 = MC_FLASH_MODE_FLASH_WAIT_STATES(0) |\r
-           MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);\r
+           AT91C_BASE_EFC0->EFC_FMR =\r
+               MC_FLASH_MODE_FLASH_WAIT_STATES(0) |\r
+                       MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);\r
     }\r
-    \r
+\r
     // Initialize all system clocks\r
     ConfigClocks();\r
-    \r
+\r
     LED_A_ON();\r
-    \r
+\r
     int common_area_present = 0;\r
-    switch(RSTC_STATUS & RST_STATUS_TYPE_MASK) {\r
-    case RST_STATUS_TYPE_WATCHDOG:\r
-    case RST_STATUS_TYPE_SOFTWARE:\r
-    case RST_STATUS_TYPE_USER:\r
+    switch(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_RSTTYP) {\r
+    case AT91C_RSTC_RSTTYP_WATCHDOG:\r
+    case AT91C_RSTC_RSTTYP_SOFTWARE:\r
+    case AT91C_RSTC_RSTTYP_USER:\r
            /* In these cases the common_area in RAM should be ok, retain it if it's there */\r
            if(common_area.magic == COMMON_AREA_MAGIC && common_area.version == 1) {\r
                    common_area_present = 1;\r
@@ -262,7 +272,7 @@ void BootROM(void)
     default: /* Otherwise, initialize it from scratch */\r
            break;\r
     }\r
-    \r
+\r
     if(!common_area_present){\r
            /* Common area not ok, initialize it */\r
            int i; for(i=0; i<sizeof(common_area); i++) { /* Makeshift memset, no need to drag util.c into this */\r
@@ -272,7 +282,7 @@ void BootROM(void)
            common_area.version = 1;\r
            common_area.flags.bootrom_present = 1;\r
     }\r
-    \r
+\r
     common_area.flags.bootrom_present = 1;\r
     if(common_area.command == COMMON_AREA_COMMAND_ENTER_FLASH_MODE) {\r
            common_area.command = COMMON_AREA_COMMAND_NONE;\r
index faf59520d09b498ee94429cbdf847b044c5aa609..6260eb05da4e5803f2f8d29b02be72ba0c3b46e4 100644 (file)
@@ -54,7 +54,7 @@ INCLUDE = -I../include
 # Also search prerequisites in the common directory (for usb.c), and the fpga directory (for fpga.bit)
 VPATH = . ../common/ ../fpga/
 
-INCLUDES = ../include/proxmark3.h ../include/at91sam7s128.h ../include/config_gpio.h ../include/usb_cmd.h $(APP_INCLUDES)
+INCLUDES = ../include/proxmark3.h ../include/at91sam7s512.h ../include/config_gpio.h ../include/usb_cmd.h $(APP_INCLUDES)
 
 CFLAGS =  -c $(INCLUDE) -Wall -Werror -pedantic -std=gnu99 $(APP_CFLAGS)
 
index bef4d7e057eb3fc6769892ebe89e3fea1a1f3122..2e8365e45904e257434e2e605c093152d78dab4a 100644 (file)
@@ -217,58 +217,58 @@ static void UsbSendEp0(const BYTE *data, int len)
                len -= thisTime;\r
 \r
                for(i = 0; i < thisTime; i++) {\r
-                       UDP_ENDPOINT_FIFO(0) = *data;\r
+                       AT91C_BASE_UDP->UDP_FDR[0] = *data;\r
                        data++;\r
                }\r
 \r
-               if(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED) {\r
-                       UDP_ENDPOINT_CSR(0) &= ~UDP_CSR_TX_PACKET_ACKED;\r
-                       while(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED)\r
+               if(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP) {\r
+                       AT91C_BASE_UDP->UDP_CSR[0] &= ~AT91C_UDP_TXCOMP;\r
+                       while(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP)\r
                                ;\r
                }\r
 \r
-               UDP_ENDPOINT_CSR(0) |= UDP_CSR_TX_PACKET;\r
+               AT91C_BASE_UDP->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;\r
 \r
                do {\r
-                       if(UDP_ENDPOINT_CSR(0) & UDP_CSR_RX_PACKET_RECEIVED_BANK_0) {\r
+                       if(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_RX_DATA_BK0) {\r
                                // This means that the host is trying to write to us, so\r
                                // abandon our write to them.\r
-                               UDP_ENDPOINT_CSR(0) &= ~UDP_CSR_RX_PACKET_RECEIVED_BANK_0;\r
+                               AT91C_BASE_UDP->UDP_CSR[0] &= ~AT91C_UDP_RX_DATA_BK0;\r
                                return;\r
                        }\r
-               } while(!(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED));\r
+               } while(!(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP));\r
        } while(len > 0);\r
 \r
-       if(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED) {\r
-               UDP_ENDPOINT_CSR(0) &= ~UDP_CSR_TX_PACKET_ACKED;\r
-               while(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED)\r
+       if(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP) {\r
+               AT91C_BASE_UDP->UDP_CSR[0] &= ~AT91C_UDP_TXCOMP;\r
+               while(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP)\r
                        ;\r
        }\r
 }\r
 \r
 static void UsbSendZeroLength(void)\r
 {\r
-       UDP_ENDPOINT_CSR(0) |= UDP_CSR_TX_PACKET;\r
+       AT91C_BASE_UDP->UDP_CSR[0] |= AT91C_UDP_TXPKTRDY;\r
 \r
-       while(!(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED))\r
+       while(!(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP))\r
                ;\r
 \r
-       UDP_ENDPOINT_CSR(0) &= ~UDP_CSR_TX_PACKET_ACKED;\r
+       AT91C_BASE_UDP->UDP_CSR[0] &= ~AT91C_UDP_TXCOMP;\r
 \r
-       while(UDP_ENDPOINT_CSR(0) & UDP_CSR_TX_PACKET_ACKED)\r
+       while(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_TXCOMP)\r
                ;\r
 }\r
 \r
 static void UsbSendStall(void)\r
 {\r
-       UDP_ENDPOINT_CSR(0) |= UDP_CSR_FORCE_STALL;\r
+       AT91C_BASE_UDP->UDP_CSR[0] |= AT91C_UDP_FORCESTALL;\r
 \r
-       while(!(UDP_ENDPOINT_CSR(0) & UDP_CSR_STALL_SENT))\r
+       while(!(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_STALLSENT))\r
                ;\r
 \r
-       UDP_ENDPOINT_CSR(0) &= ~UDP_CSR_STALL_SENT;\r
+       AT91C_BASE_UDP->UDP_CSR[0] &= ~AT91C_UDP_STALLSENT;\r
 \r
-       while(UDP_ENDPOINT_CSR(0) & UDP_CSR_STALL_SENT)\r
+       while(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_STALLSENT)\r
                ;\r
 }\r
 \r
@@ -278,17 +278,17 @@ static void HandleRxdSetupData(void)
        UsbSetupData usd;\r
 \r
        for(i = 0; i < sizeof(usd); i++) {\r
-               ((BYTE *)&usd)[i] = UDP_ENDPOINT_FIFO(0);\r
+               ((BYTE *)&usd)[i] = AT91C_BASE_UDP->UDP_FDR[0];\r
        }\r
 \r
        if(usd.bmRequestType & 0x80) {\r
-               UDP_ENDPOINT_CSR(0) |= UDP_CSR_CONTROL_DATA_DIR;\r
-               while(!(UDP_ENDPOINT_CSR(0) & UDP_CSR_CONTROL_DATA_DIR))\r
+               AT91C_BASE_UDP->UDP_CSR[0] |= AT91C_UDP_DIR;\r
+               while(!(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_DIR))\r
                        ;\r
        }\r
 \r
-       UDP_ENDPOINT_CSR(0) &= ~UDP_CSR_RX_HAVE_READ_SETUP_DATA;\r
-       while(UDP_ENDPOINT_CSR(0) & UDP_CSR_RX_HAVE_READ_SETUP_DATA)\r
+       AT91C_BASE_UDP->UDP_CSR[0] &= ~AT91C_UDP_RXSETUP;\r
+       while(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_RXSETUP)\r
                ;\r
 \r
        switch(usd.bRequest) {\r
@@ -312,11 +312,11 @@ static void HandleRxdSetupData(void)
 \r
                case USB_REQUEST_SET_ADDRESS:\r
                        UsbSendZeroLength();\r
-                       UDP_FUNCTION_ADDR = UDP_FUNCTION_ADDR_ENABLED | usd.wValue ;\r
+                       AT91C_BASE_UDP->UDP_FADDR = AT91C_UDP_FEN | usd.wValue ;\r
                        if(usd.wValue != 0) {\r
-                               UDP_GLOBAL_STATE = UDP_GLOBAL_STATE_ADDRESSED;\r
+                               AT91C_BASE_UDP->UDP_GLBSTATE = AT91C_UDP_FADDEN;\r
                        } else {\r
-                               UDP_GLOBAL_STATE = 0;\r
+                               AT91C_BASE_UDP->UDP_GLBSTATE = 0;\r
                        }\r
                        break;\r
 \r
@@ -334,15 +334,15 @@ static void HandleRxdSetupData(void)
                case USB_REQUEST_SET_CONFIGURATION:\r
                        CurrentConfiguration = usd.wValue;\r
                        if(CurrentConfiguration) {\r
-                               UDP_GLOBAL_STATE = UDP_GLOBAL_STATE_CONFIGURED;\r
-                               UDP_ENDPOINT_CSR(1) = UDP_CSR_ENABLE_EP |\r
-                                       UDP_CSR_EPTYPE_INTERRUPT_OUT;\r
-                               UDP_ENDPOINT_CSR(2) = UDP_CSR_ENABLE_EP |\r
-                                       UDP_CSR_EPTYPE_INTERRUPT_IN;\r
+                               AT91C_BASE_UDP->UDP_GLBSTATE = AT91C_UDP_CONFG;\r
+                               AT91C_BASE_UDP->UDP_CSR[1] = AT91C_UDP_EPEDS |\r
+                                       AT91C_UDP_EPTYPE_INT_OUT;\r
+                               AT91C_BASE_UDP->UDP_CSR[2] = AT91C_UDP_EPEDS |\r
+                                       AT91C_UDP_EPTYPE_INT_IN;\r
                        } else {\r
-                               UDP_GLOBAL_STATE = UDP_GLOBAL_STATE_ADDRESSED;\r
-                               UDP_ENDPOINT_CSR(1) = 0;\r
-                               UDP_ENDPOINT_CSR(2) = 0;\r
+                               AT91C_BASE_UDP->UDP_GLBSTATE = AT91C_UDP_FADDEN;\r
+                               AT91C_BASE_UDP->UDP_CSR[1] = 0;\r
+                               AT91C_BASE_UDP->UDP_CSR[2] = 0;\r
                        }\r
                        UsbSendZeroLength();\r
                        break;\r
@@ -376,15 +376,15 @@ void UsbSendPacket(BYTE *packet, int len)
                thisTime = min(len, 8);\r
 \r
                for(i = 0; i < thisTime; i++) {\r
-                       UDP_ENDPOINT_FIFO(2) = packet[i];\r
+                       AT91C_BASE_UDP->UDP_FDR[2] = packet[i];\r
                }\r
-               UDP_ENDPOINT_CSR(2) |= UDP_CSR_TX_PACKET;\r
+               AT91C_BASE_UDP->UDP_CSR[2] |= AT91C_UDP_TXPKTRDY;\r
 \r
-               while(!(UDP_ENDPOINT_CSR(2) & UDP_CSR_TX_PACKET_ACKED))\r
+               while(!(AT91C_BASE_UDP->UDP_CSR[2] & AT91C_UDP_TXCOMP))\r
                        ;\r
-               UDP_ENDPOINT_CSR(2) &= ~UDP_CSR_TX_PACKET_ACKED;\r
+               AT91C_BASE_UDP->UDP_CSR[2] &= ~AT91C_UDP_TXCOMP;\r
 \r
-               while(UDP_ENDPOINT_CSR(2) & UDP_CSR_TX_PACKET_ACKED)\r
+               while(AT91C_BASE_UDP->UDP_CSR[2] & AT91C_UDP_TXCOMP)\r
                        ;\r
 \r
                len -= thisTime;\r
@@ -396,16 +396,16 @@ static void HandleRxdData(void)
 {\r
        int i, len;\r
 \r
-       if(UDP_ENDPOINT_CSR(1) & UDP_CSR_RX_PACKET_RECEIVED_BANK_0) {\r
-               len = UDP_CSR_BYTES_RECEIVED(UDP_ENDPOINT_CSR(1));\r
+       if(AT91C_BASE_UDP->UDP_CSR[1] & AT91C_UDP_RX_DATA_BK0) {\r
+               len = UDP_CSR_BYTES_RECEIVED(AT91C_BASE_UDP->UDP_CSR[1]);\r
 \r
                for(i = 0; i < len; i++) {\r
-                       UsbBuffer[UsbSoFarCount] = UDP_ENDPOINT_FIFO(1);\r
+                       UsbBuffer[UsbSoFarCount] = AT91C_BASE_UDP->UDP_FDR[1];\r
                        UsbSoFarCount++;\r
                }\r
 \r
-               UDP_ENDPOINT_CSR(1) &= ~UDP_CSR_RX_PACKET_RECEIVED_BANK_0;\r
-               while(UDP_ENDPOINT_CSR(1) & UDP_CSR_RX_PACKET_RECEIVED_BANK_0)\r
+               AT91C_BASE_UDP->UDP_CSR[1] &= ~AT91C_UDP_RX_DATA_BK0;\r
+               while(AT91C_BASE_UDP->UDP_CSR[1] & AT91C_UDP_RX_DATA_BK0)\r
                        ;\r
 \r
                if(UsbSoFarCount >= 64) {\r
@@ -414,16 +414,16 @@ static void HandleRxdData(void)
                }\r
        }\r
 \r
-       if(UDP_ENDPOINT_CSR(1) & UDP_CSR_RX_PACKET_RECEIVED_BANK_1) {\r
-               len = UDP_CSR_BYTES_RECEIVED(UDP_ENDPOINT_CSR(1));\r
+       if(AT91C_BASE_UDP->UDP_CSR[1] & AT91C_UDP_RX_DATA_BK1) {\r
+               len = UDP_CSR_BYTES_RECEIVED(AT91C_BASE_UDP->UDP_CSR[1]);\r
 \r
                for(i = 0; i < len; i++) {\r
-                       UsbBuffer[UsbSoFarCount] = UDP_ENDPOINT_FIFO(1);\r
+                       UsbBuffer[UsbSoFarCount] = AT91C_BASE_UDP->UDP_FDR[1];\r
                        UsbSoFarCount++;\r
                }\r
 \r
-               UDP_ENDPOINT_CSR(1) &= ~UDP_CSR_RX_PACKET_RECEIVED_BANK_1;\r
-               while(UDP_ENDPOINT_CSR(1) & UDP_CSR_RX_PACKET_RECEIVED_BANK_1)\r
+               AT91C_BASE_UDP->UDP_CSR[1] &= ~AT91C_UDP_RX_DATA_BK1;\r
+               while(AT91C_BASE_UDP->UDP_CSR[1] & AT91C_UDP_RX_DATA_BK1)\r
                        ;\r
 \r
                if(UsbSoFarCount >= 64) {\r
@@ -446,14 +446,14 @@ void UsbStart(void)
 \r
        USB_D_PLUS_PULLUP_ON();\r
 \r
-       if(UDP_INTERRUPT_STATUS & UDP_INTERRUPT_END_OF_BUS_RESET) {\r
-               UDP_INTERRUPT_CLEAR = UDP_INTERRUPT_END_OF_BUS_RESET;\r
+       if(AT91C_BASE_UDP->UDP_ISR & AT91C_UDP_ENDBUSRES) {\r
+               AT91C_BASE_UDP->UDP_ICR = AT91C_UDP_ENDBUSRES;\r
        }\r
 }\r
 \r
 BOOL UsbConnected()\r
 {\r
-       if (UDP_GLOBAL_STATE & UDP_GLOBAL_STATE_CONFIGURED)\r
+       if (AT91C_BASE_UDP->UDP_GLBSTATE & AT91C_UDP_CONFG)\r
                return TRUE;\r
        else\r
                return FALSE;\r
@@ -463,30 +463,30 @@ BOOL UsbPoll(BOOL blinkLeds)
 {\r
        BOOL ret = FALSE;\r
 \r
-       if(UDP_INTERRUPT_STATUS & UDP_INTERRUPT_END_OF_BUS_RESET) {\r
-               UDP_INTERRUPT_CLEAR = UDP_INTERRUPT_END_OF_BUS_RESET;\r
+       if(AT91C_BASE_UDP->UDP_ISR & AT91C_UDP_ENDBUSRES) {\r
+               AT91C_BASE_UDP->UDP_ICR = AT91C_UDP_ENDBUSRES;\r
 \r
                // following a reset we should be ready to receive a setup packet\r
-               UDP_RESET_ENDPOINT = 0xf;\r
-               UDP_RESET_ENDPOINT = 0;\r
+               AT91C_BASE_UDP->UDP_RSTEP = 0xf;\r
+               AT91C_BASE_UDP->UDP_RSTEP = 0;\r
 \r
-               UDP_FUNCTION_ADDR = UDP_FUNCTION_ADDR_ENABLED;\r
+               AT91C_BASE_UDP->UDP_FADDR = AT91C_UDP_FEN;\r
 \r
-               UDP_ENDPOINT_CSR(0) = UDP_CSR_EPTYPE_CONTROL | UDP_CSR_ENABLE_EP;\r
+               AT91C_BASE_UDP->UDP_CSR[0] = AT91C_UDP_EPTYPE_CTRL | AT91C_UDP_EPEDS;\r
 \r
                CurrentConfiguration = 0;\r
 \r
                ret = TRUE;\r
        }\r
 \r
-       if(UDP_INTERRUPT_STATUS & UDP_INTERRUPT_ENDPOINT(0)) {\r
-               if(UDP_ENDPOINT_CSR(0) & UDP_CSR_RX_HAVE_READ_SETUP_DATA) {\r
+       if(AT91C_BASE_UDP->UDP_ISR & UDP_INTERRUPT_ENDPOINT(0)) {\r
+               if(AT91C_BASE_UDP->UDP_CSR[0] & AT91C_UDP_RXSETUP) {\r
                        HandleRxdSetupData();\r
                        ret = TRUE;\r
                }\r
        }\r
 \r
-       if(UDP_INTERRUPT_STATUS & UDP_INTERRUPT_ENDPOINT(1)) {\r
+       if(AT91C_BASE_UDP->UDP_ISR & UDP_INTERRUPT_ENDPOINT(1)) {\r
                HandleRxdData();\r
                ret = TRUE;\r
        }\r
diff --git a/include/at91sam7s128.h b/include/at91sam7s128.h
deleted file mode 100644 (file)
index 708201c..0000000
+++ /dev/null
@@ -1,220 +0,0 @@
-#include <at91sam7s512.h>\r
-\r
-#ifndef __AT91SAM7S128_H\r
-#define __AT91SAM7S128_H\r
-\r
-/***************************************************************\r
- * Start of translation between PM3 defines and AT91 defines\r
- * TODO these should be replaced throughout the code at some stage\r
- ***************************************************************/\r
-#define PERIPH_PIOA                                                            AT91C_ID_PIOA\r
-#define PERIPH_ADC                                                             AT91C_ID_ADC\r
-#define PERIPH_SPI                                                             AT91C_ID_SPI\r
-#define PERIPH_SSC                                                             AT91C_ID_SSC\r
-#define PERIPH_PWMC                                                            AT91C_ID_PWMC\r
-#define PERIPH_UDP                                                             AT91C_ID_UDP\r
-#define PERIPH_TC1                                                             AT91C_ID_TC1\r
-\r
-#define SSC_BASE                                                               AT91C_BASE_SSC\r
-\r
-#define WDT_CONTROL                                                            AT91C_BASE_WDTC->WDTC_WDCR\r
-\r
-#define PWM_ENABLE                                                             AT91C_BASE_PWMC->PWMC_ENA\r
-\r
-// TODO WARNING these PWM defines MUST be replaced in the code ASAP before\r
-// someone starts using a value of x other than that selected below\r
-#define PWM_CH_PERIOD(x)                                               AT91C_BASE_PWMC_CH0->PWMC_CPRDR\r
-#define PWM_CH_COUNTER(x)                                              AT91C_BASE_PWMC_CH0->PWMC_CCNTR\r
-#define PWM_CH_MODE(x)                                                 AT91C_BASE_PWMC_CH0->PWMC_CMR\r
-#define PWM_CH_DUTY_CYCLE(x)                                   AT91C_BASE_PWMC_CH0->PWMC_CDTYR\r
-\r
-#define PDC_RX_POINTER(x)                                              AT91C_BASE_PDC_SSC->PDC_RPR\r
-#define PDC_RX_COUNTER(x)                                              AT91C_BASE_PDC_SSC->PDC_RCR\r
-#define PDC_RX_NEXT_POINTER(x)                                 AT91C_BASE_PDC_SSC->PDC_RNPR\r
-#define PDC_RX_NEXT_COUNTER(x)                                 AT91C_BASE_PDC_SSC->PDC_RNCR\r
-#define PDC_CONTROL(x)                                                 AT91C_BASE_PDC_SSC->PDC_PTCR\r
-// End WARNING\r
-\r
-#define DBGU_CIDR                                                              AT91C_BASE_DBGU->DBGU_CIDR\r
-\r
-#define RSTC_CONTROL                                                   AT91C_BASE_RSTC->RSTC_RCR\r
-#define RSTC_STATUS                                                            AT91C_BASE_RSTC->RSTC_RSR\r
-\r
-#define MC_FLASH_COMMAND                                               AT91C_BASE_EFC0->EFC_FCR\r
-#define MC_FLASH_MODE0                                                 AT91C_BASE_EFC0->EFC_FMR\r
-#define MC_FLASH_MODE1                                                 AT91C_BASE_EFC1->EFC_FMR\r
-#define MC_FLASH_STATUS                                                        AT91C_BASE_EFC0->EFC_FSR\r
-\r
-#define ADC_CONTROL                                                            AT91C_BASE_ADC->ADC_CR\r
-#define ADC_MODE                                                               AT91C_BASE_ADC->ADC_MR\r
-#define ADC_CHANNEL_ENABLE                                             AT91C_BASE_ADC->ADC_CHER\r
-#define ADC_STATUS                                                             AT91C_BASE_ADC->ADC_SR\r
-#define ADC_CHANNEL_DATA(x)                                            AT91C_BASE_ADC->ADC_CDR[x]\r
-\r
-#define PIO_ENABLE                                                             AT91C_BASE_PIOA->PIO_PER\r
-#define PIO_DISABLE                                                            AT91C_BASE_PIOA->PIO_PDR\r
-#define PIO_OUTPUT_ENABLE                                              AT91C_BASE_PIOA->PIO_OER\r
-#define PIO_OUTPUT_DISABLE                                             AT91C_BASE_PIOA->PIO_ODR\r
-#define PIO_OUTPUT_DATA_SET                                            AT91C_BASE_PIOA->PIO_SODR\r
-#define PIO_OUTPUT_DATA_CLEAR                                  AT91C_BASE_PIOA->PIO_CODR\r
-#define PIO_PIN_DATA_STATUS                                            AT91C_BASE_PIOA->PIO_PDSR\r
-#define PIO_NO_PULL_UP_ENABLE                                  AT91C_BASE_PIOA->PIO_PPUDR\r
-#define PIO_NO_PULL_UP_DISABLE                                 AT91C_BASE_PIOA->PIO_PPUER\r
-#define PIO_PERIPHERAL_B_SEL                                   AT91C_BASE_PIOA->PIO_BSR\r
-#define PIO_PERIPHERAL_A_SEL                                   AT91C_BASE_PIOA->PIO_ASR\r
-\r
-#define PMC_SYS_CLK_ENABLE                                             AT91C_BASE_PMC->PMC_SCER\r
-#define PMC_PERIPHERAL_CLK_ENABLE                              AT91C_BASE_PMC->PMC_PCER\r
-#define PMC_MAIN_OSCILLATOR                                            AT91C_BASE_PMC->PMC_MOR\r
-#define PMC_PLL                                                                        AT91C_BASE_PMC->PMC_PLLR\r
-#define PMC_MASTER_CLK                                                 AT91C_BASE_PMC->PMC_MCKR\r
-#define PMC_PROGRAMMABLE_CLK_0                                 AT91C_BASE_PMC->PMC_PCKR[0]\r
-#define PMC_INTERRUPT_STATUS                                   AT91C_BASE_PMC->PMC_SR\r
-\r
-#define SSC_CONTROL                                                            AT91C_BASE_SSC->SSC_CR\r
-#define SSC_CLOCK_DIVISOR                                              AT91C_BASE_SSC->SSC_CMR\r
-#define SSC_RECEIVE_CLOCK_MODE                                 AT91C_BASE_SSC->SSC_RCMR\r
-#define SSC_RECEIVE_FRAME_MODE                                 AT91C_BASE_SSC->SSC_RFMR\r
-#define SSC_TRANSMIT_CLOCK_MODE                                        AT91C_BASE_SSC->SSC_TCMR\r
-#define SSC_TRANSMIT_FRAME_MODE                                        AT91C_BASE_SSC->SSC_TFMR\r
-#define SSC_RECEIVE_HOLDING                                            AT91C_BASE_SSC->SSC_RHR\r
-#define SSC_TRANSMIT_HOLDING                                   AT91C_BASE_SSC->SSC_THR\r
-#define SSC_STATUS                                                             AT91C_BASE_SSC->SSC_SR\r
-\r
-#define SPI_CONTROL                                                            AT91C_BASE_SPI->SPI_CR\r
-#define SPI_MODE                                                               AT91C_BASE_SPI->SPI_MR\r
-#define SPI_TX_DATA                                                            AT91C_BASE_SPI->SPI_TDR\r
-#define SPI_STATUS                                                             AT91C_BASE_SPI->SPI_SR\r
-#define SPI_FOR_CHIPSEL_0                                              AT91C_BASE_SPI->SPI_CSR[0]\r
-#define SPI_FOR_CHIPSEL_1                                              AT91C_BASE_SPI->SPI_CSR[1]\r
-#define SPI_FOR_CHIPSEL_2                                              AT91C_BASE_SPI->SPI_CSR[2]\r
-#define SPI_FOR_CHIPSEL_3                                              AT91C_BASE_SPI->SPI_CSR[3]\r
-\r
-#define TC1_CCR                                                                        AT91C_BASE_TC1->TC_CCR\r
-#define TC1_CMR                                                                        AT91C_BASE_TC1->TC_CMR\r
-#define TC1_CV                                                                 AT91C_BASE_TC1->TC_CV\r
-#define TC1_RA                                                                 AT91C_BASE_TC1->TC_RA\r
-#define TC1_SR                                                                 AT91C_BASE_TC1->TC_SR\r
-\r
-#define PDC_RX_ENABLE                                                  AT91C_PDC_RXTEN\r
-#define PDC_RX_DISABLE                                                 AT91C_PDC_RXTDIS\r
-\r
-#define TC_CMR_ETRGEDG_RISING                                  AT91C_TC_ETRGEDG_RISING\r
-#define TC_CMR_ABETRG                                                  AT91C_TC_ABETRG\r
-#define TC_CMR_LDRA_RISING                                             AT91C_TC_LDRA_RISING\r
-#define TC_CMR_LDRB_RISING                                             AT91C_TC_LDRB_RISING\r
-#define TC_CCR_CLKEN                                                   AT91C_TC_CLKEN\r
-#define TC_CCR_SWTRG                                                   AT91C_TC_SWTRG\r
-#define TC_SR_LDRAS                                                            AT91C_TC_LDRAS\r
-#define TC_CMR_ETRGEDG                                                 AT91C_TC_ETRGEDG\r
-#define TC_CCR_CLKDIS                                                  AT91C_TC_CLKDIS\r
-\r
-#define ADC_CONTROL_RESET                                              AT91C_ADC_SWRST\r
-#define ADC_CONTROL_START                                              AT91C_ADC_START\r
-\r
-#define SPI_CONTROL_ENABLE                                             AT91C_SPI_SPIEN\r
-#define SPI_CONTROL_LAST_TRANSFER                              AT91C_SPI_LASTXFER\r
-#define SPI_CONTROL_RESET                                              AT91C_SPI_SWRST\r
-#define SPI_CONTROL_DISABLE                                            AT91C_SPI_SPIDIS\r
-#define SPI_STATUS_TX_EMPTY                                            AT91C_SPI_TXEMPTY\r
-\r
-#define SSC_CONTROL_RX_ENABLE                                  AT91C_SSC_RXEN\r
-#define SSC_CONTROL_TX_ENABLE                                  AT91C_SSC_TXEN\r
-#define SSC_FRAME_MODE_MSB_FIRST                               AT91C_SSC_MSBF\r
-#define SSC_CONTROL_RESET                                              AT91C_SSC_SWRST\r
-#define SSC_STATUS_TX_READY                                            AT91C_SSC_TXRDY\r
-#define SSC_STATUS_RX_READY                                            AT91C_SSC_RXRDY\r
-\r
-#define FCMD_WRITE_PAGE                                                        AT91C_MC_FCMD_START_PROG\r
-#define FLASH_PAGE_SIZE_BYTES                                  AT91C_IFLASH_PAGE_SIZE\r
-\r
-#define RST_CONTROL_PROCESSOR_RESET                            AT91C_RSTC_PROCRST\r
-#define RST_STATUS_TYPE_MASK                                   AT91C_RSTC_RSTTYP\r
-#define RST_STATUS_TYPE_WATCHDOG                               AT91C_RSTC_RSTTYP_WATCHDOG\r
-#define RST_STATUS_TYPE_SOFTWARE                               AT91C_RSTC_RSTTYP_SOFTWARE\r
-#define RST_STATUS_TYPE_USER                                   AT91C_RSTC_RSTTYP_USER\r
-\r
-#define PMC_SYS_CLK_PROCESSOR_CLK                              AT91C_PMC_PCK\r
-#define PMC_SYS_CLK_UDP_CLK                                            AT91C_PMC_UDP\r
-#define PMC_CLK_SELECTION_PLL_CLOCK                            AT91C_PMC_CSS_PLL_CLK\r
-#define PMC_CLK_PRESCALE_DIV_4                                 AT91C_PMC_PRES_CLK_4\r
-#define PMC_SYS_CLK_PROGRAMMABLE_CLK_0                 AT91C_PMC_PCK0\r
-\r
-#define UDP_INTERRUPT_STATUS                                   AT91C_BASE_UDP->UDP_ISR\r
-#define UDP_INTERRUPT_CLEAR                                            AT91C_BASE_UDP->UDP_ICR\r
-#define UDP_FUNCTION_ADDR                                              AT91C_BASE_UDP->UDP_FADDR\r
-#define UDP_RESET_ENDPOINT                                             AT91C_BASE_UDP->UDP_RSTEP\r
-#define UDP_GLOBAL_STATE                                               AT91C_BASE_UDP->UDP_GLBSTATE\r
-#define UDP_ENDPOINT_CSR(x)                                            AT91C_BASE_UDP->UDP_CSR[x]\r
-#define UDP_ENDPOINT_FIFO(x)                                   AT91C_BASE_UDP->UDP_FDR[x]\r
-\r
-#define UDP_CSR_CONTROL_DATA_DIR                               AT91C_UDP_DIR\r
-#define UDP_CSR_ENABLE_EP                                              AT91C_UDP_EPEDS\r
-#define UDP_CSR_EPTYPE_CONTROL                                 AT91C_UDP_EPTYPE_CTRL\r
-#define UDP_CSR_EPTYPE_INTERRUPT_IN                            AT91C_UDP_EPTYPE_INT_IN\r
-#define UDP_CSR_EPTYPE_INTERRUPT_OUT                   AT91C_UDP_EPTYPE_INT_OUT\r
-#define UDP_CSR_FORCE_STALL                                            AT91C_UDP_FORCESTALL\r
-#define UDP_CSR_RX_HAVE_READ_SETUP_DATA                        AT91C_UDP_RXSETUP\r
-#define UDP_CSR_RX_PACKET_RECEIVED_BANK_0              AT91C_UDP_RX_DATA_BK0\r
-#define UDP_CSR_RX_PACKET_RECEIVED_BANK_1              AT91C_UDP_RX_DATA_BK1\r
-#define UDP_CSR_STALL_SENT                                             AT91C_UDP_STALLSENT\r
-#define UDP_CSR_TX_PACKET                                              AT91C_UDP_TXPKTRDY\r
-#define UDP_CSR_TX_PACKET_ACKED                                        AT91C_UDP_TXCOMP\r
-\r
-#define UDP_FUNCTION_ADDR_ENABLED                              AT91C_UDP_FEN\r
-#define UDP_GLOBAL_STATE_ADDRESSED                             AT91C_UDP_FADDEN\r
-#define UDP_GLOBAL_STATE_CONFIGURED                            AT91C_UDP_CONFG\r
-#define UDP_INTERRUPT_END_OF_BUS_RESET                 AT91C_UDP_ENDBUSRES\r
-/***************************************************************\r
- * end of translation between PM3 defines and AT91 defines\r
- ***************************************************************/\r
-\r
-/***************************************************************\r
- * the defines below this line have no AT91 equivalents and can\r
- * be ideally moved to proxmark3.h\r
- ***************************************************************/\r
-#define WDT_HIT()                                                              WDT_CONTROL = 0xa5000001\r
-\r
-#define PWM_CH_MODE_PRESCALER(x)                               ((x)<<0)\r
-#define PWM_CHANNEL(x)                                                 (1<<(x))\r
-\r
-#define TC_CMR_TCCLKS_TIMER_CLOCK1                             (0<<0)\r
-\r
-#define ADC_CHAN_LF                                                            4\r
-#define ADC_CHAN_HF                                                            5\r
-#define ADC_MODE_PRESCALE(x)                                   ((x)<<8)\r
-#define ADC_MODE_STARTUP_TIME(x)                               ((x)<<16)\r
-#define ADC_MODE_SAMPLE_HOLD_TIME(x)                   ((x)<<24)\r
-#define ADC_CHANNEL(x)                                                 (1<<(x))\r
-#define ADC_END_OF_CONVERSION(x)                               (1<<(x))\r
-\r
-#define SSC_CLOCK_MODE_START(x)                                        ((x)<<8)\r
-#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x)   ((x)<<8)\r
-#define SSC_CLOCK_MODE_SELECT(x)                               ((x)<<0)\r
-#define SSC_FRAME_MODE_BITS_IN_WORD(x)                 (((x)-1)<<0)\r
-\r
-#define MC_FLASH_COMMAND_KEY                                   ((0x5A)<<24)\r
-#define MC_FLASH_STATUS_READY                                  (1<<0)\r
-#define MC_FLASH_MODE_FLASH_WAIT_STATES(x)             ((x)<<8)\r
-#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x)             ((x)<<16)\r
-#define MC_FLASH_COMMAND_PAGEN(x)                              ((x)<<8)\r
-\r
-#define RST_CONTROL_KEY                                                        (0xA5<<24)\r
-\r
-#define PMC_MAIN_OSCILLATOR_ENABLE                             (1<<0)\r
-#define PMC_MAIN_OSCILLATOR_STABILIZED                 (1<<0)\r
-#define PMC_MAIN_OSCILLATOR_PLL_LOCK                   (1<<2)\r
-#define PMC_MAIN_OSCILLATOR_MCK_READY                  (1<<3)\r
-\r
-#define PMC_PLL_DIVISOR(x)                                             (x)\r
-#define PMC_MAIN_OSCILLATOR_STARTUP_DELAY(x)   ((x)<<8)\r
-#define PMC_CLK_PRESCALE_DIV_2                                 (1<<2)\r
-#define PMC_PLL_MULTIPLIER(x)                                  (((x)-1)<<16)\r
-#define PMC_PLL_COUNT_BEFORE_LOCK(x)                   ((x)<<8)\r
-#define PMC_PLL_FREQUENCY_RANGE(x)                             ((x)<<14)\r
-#define PMC_PLL_USB_DIVISOR(x)                                 ((x)<<28)\r
-\r
-#define UDP_INTERRUPT_ENDPOINT(x)                              (1<<(x))\r
-#define UDP_CSR_BYTES_RECEIVED(x)                              (((x) >> 16) & 0x7ff)\r
-\r
-#endif\r
index 1a189a9ee912748758c5bd0243be7e5feafbcf6b..347e38ea27880c39cd244828b17e5baefd43f8e4 100644 (file)
@@ -1,40 +1,37 @@
 #ifndef __CONFIG_GPIO_H\r
 #define __CONFIG_GPIO_H\r
 \r
-#define GPIO_LED_A                     0\r
-#define GPIO_PA1                       1\r
-#define GPIO_LED_D                     2\r
-#define GPIO_NVDD_ON           3\r
-#define GPIO_FPGA_NINIT                4\r
-#define GPIO_PA5                       5\r
-#define GPIO_PCK0                      6\r
-#define GPIO_LRST                      7\r
-#define GPIO_LED_B                     8\r
-#define GPIO_LED_C                     9\r
-#define GPIO_NCS2                      10\r
-#define GPIO_NCS0                      11\r
-#define GPIO_MISO                      12\r
-#define GPIO_MOSI                      13\r
-#define GPIO_SPCK                      14\r
-#define GPIO_SSC_FRAME         15\r
-#define GPIO_SSC_CLK           16\r
-#define GPIO_SSC_DOUT          17\r
-#define GPIO_SSC_DIN           18\r
-#define GPIO_MUXSEL_HIPKD      19\r
-#define GPIO_MUXSEL_LOPKD      20\r
-#define GPIO_MUXSEL_HIRAW      21\r
-#define GPIO_MUXSEL_LORAW      22\r
-#define GPIO_BUTTON                    23\r
-#define GPIO_USB_PU                    24\r
-#define GPIO_RELAY                     25\r
-#define GPIO_FPGA_ON           26\r
-#define GPIO_FPGA_DONE         27\r
-#define GPIO_FPGA_NPROGRAM     28\r
-#define GPIO_FPGA_CCLK         29\r
-#define GPIO_FPGA_DIN          30\r
-#define GPIO_FPGA_DOUT         31\r
-\r
-#define ANIN_AMPL_LO           4\r
-#define ANIN_AMPL_HI           5\r
+#define GPIO_LED_A                     AT91C_PIO_PA0\r
+#define GPIO_PA1                       AT91C_PIO_PA1\r
+#define GPIO_LED_D                     AT91C_PIO_PA2\r
+#define GPIO_NVDD_ON           AT91C_PIO_PA3\r
+#define GPIO_FPGA_NINIT                AT91C_PIO_PA4\r
+#define GPIO_PA5                       AT91C_PIO_PA5\r
+#define GPIO_PCK0                      AT91C_PA6_PCK0\r
+#define GPIO_LRST                      AT91C_PIO_PA7\r
+#define GPIO_LED_B                     AT91C_PIO_PA8\r
+#define GPIO_LED_C                     AT91C_PIO_PA9\r
+#define GPIO_NCS2                      AT91C_PA10_NPCS2\r
+#define GPIO_NCS0                      AT91C_PA11_NPCS0\r
+#define GPIO_MISO                      AT91C_PA12_MISO\r
+#define GPIO_MOSI                      AT91C_PA13_MOSI\r
+#define GPIO_SPCK                      AT91C_PA14_SPCK\r
+#define GPIO_SSC_FRAME         AT91C_PA15_TF\r
+#define GPIO_SSC_CLK           AT91C_PA16_TK\r
+#define GPIO_SSC_DOUT          AT91C_PA17_TD\r
+#define GPIO_SSC_DIN           AT91C_PA18_RD\r
+#define GPIO_MUXSEL_HIPKD      AT91C_PIO_PA19\r
+#define GPIO_MUXSEL_LOPKD      AT91C_PIO_PA20\r
+#define GPIO_MUXSEL_HIRAW      AT91C_PIO_PA21\r
+#define GPIO_MUXSEL_LORAW      AT91C_PIO_PA22\r
+#define GPIO_BUTTON                    AT91C_PIO_PA23\r
+#define GPIO_USB_PU                    AT91C_PIO_PA24\r
+#define GPIO_RELAY                     AT91C_PIO_PA25\r
+#define GPIO_FPGA_ON           AT91C_PIO_PA26\r
+#define GPIO_FPGA_DONE         AT91C_PIO_PA27\r
+#define GPIO_FPGA_NPROGRAM     AT91C_PIO_PA28\r
+#define GPIO_FPGA_CCLK         AT91C_PIO_PA29\r
+#define GPIO_FPGA_DIN          AT91C_PIO_PA30\r
+#define GPIO_FPGA_DOUT         AT91C_PIO_PA31\r
 \r
 #endif\r
index 31c7164249b07dda68c0b2045c7a3e07ab5d7cd2..f1894f999eecc391e9841cf1f2812a6aae06a53a 100644 (file)
@@ -7,11 +7,56 @@
 #define __PROXMARK3_H\r
 \r
 // Might as well have the hardware-specific defines everywhere.\r
-#include <at91sam7s128.h>\r
-\r
+#include <at91sam7s512.h>\r
 #include <config_gpio.h>\r
-#define LOW(x) PIO_OUTPUT_DATA_CLEAR = (1 << (x))\r
-#define HIGH(x)        PIO_OUTPUT_DATA_SET = (1 << (x))\r
+\r
+#define WDT_HIT()                                                              AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001\r
+\r
+#define PWM_CH_MODE_PRESCALER(x)                               ((x)<<0)\r
+#define PWM_CHANNEL(x)                                                 (1<<(x))\r
+\r
+#define TC_CMR_TCCLKS_TIMER_CLOCK1                             (0<<0)\r
+\r
+#define ADC_CHAN_LF                                                            4\r
+#define ADC_CHAN_HF                                                            5\r
+#define ADC_MODE_PRESCALE(x)                                   ((x)<<8)\r
+#define ADC_MODE_STARTUP_TIME(x)                               ((x)<<16)\r
+#define ADC_MODE_SAMPLE_HOLD_TIME(x)                   ((x)<<24)\r
+#define ADC_CHANNEL(x)                                                 (1<<(x))\r
+#define ADC_END_OF_CONVERSION(x)                               (1<<(x))\r
+\r
+#define SSC_CLOCK_MODE_START(x)                                        ((x)<<8)\r
+#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x)   ((x)<<8)\r
+#define SSC_CLOCK_MODE_SELECT(x)                               ((x)<<0)\r
+#define SSC_FRAME_MODE_BITS_IN_WORD(x)                 (((x)-1)<<0)\r
+\r
+#define MC_FLASH_COMMAND_KEY                                   ((0x5a)<<24)\r
+#define MC_FLASH_STATUS_READY                                  (1<<0)\r
+#define MC_FLASH_MODE_FLASH_WAIT_STATES(x)             ((x)<<8)\r
+#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x)             ((x)<<16)\r
+#define MC_FLASH_COMMAND_PAGEN(x)                              ((x)<<8)\r
+\r
+#define RST_CONTROL_KEY                                                        (0xa5<<24)\r
+\r
+#define PMC_MAIN_OSC_ENABLE                                            (1<<0)\r
+#define PMC_MAIN_OSC_STABILIZED                                        (1<<0)\r
+#define PMC_MAIN_OSC_PLL_LOCK                                  (1<<2)\r
+#define PMC_MAIN_OSC_MCK_READY                                 (1<<3)\r
+\r
+#define PMC_MAIN_OSC_STARTUP_DELAY(x)                  ((x)<<8)\r
+#define PMC_PLL_DIVISOR(x)                                             (x)\r
+#define PMC_CLK_PRESCALE_DIV_2                                 (1<<2)\r
+#define PMC_PLL_MULTIPLIER(x)                                  (((x)-1)<<16)\r
+#define PMC_PLL_COUNT_BEFORE_LOCK(x)                   ((x)<<8)\r
+#define PMC_PLL_FREQUENCY_RANGE(x)                             ((x)<<14)\r
+#define PMC_PLL_USB_DIVISOR(x)                                 ((x)<<28)\r
+\r
+#define UDP_INTERRUPT_ENDPOINT(x)                              (1<<(x))\r
+#define UDP_CSR_BYTES_RECEIVED(x)                              (((x) >> 16) & 0x7ff)\r
+//**************************************************************\r
+\r
+#define LOW(x) AT91C_BASE_PIOA->PIO_CODR = (x)\r
+#define HIGH(x)        AT91C_BASE_PIOA->PIO_SODR = (x)\r
 \r
 #define SPI_FPGA_MODE  0\r
 #define SPI_LCD_MODE   1\r
@@ -32,22 +77,22 @@ typedef signed short SWORD;
 #define PACKED __attribute__((__packed__))\r
 \r
 #define USB_D_PLUS_PULLUP_ON() { \\r
-               PIO_OUTPUT_DATA_SET = (1<<GPIO_USB_PU); \\r
-               PIO_OUTPUT_ENABLE = (1<<GPIO_USB_PU); \\r
+               HIGH(GPIO_USB_PU); \\r
+               AT91C_BASE_PIOA->PIO_OER = GPIO_USB_PU; \\r
        }\r
-#define USB_D_PLUS_PULLUP_OFF() PIO_OUTPUT_DISABLE = (1<<GPIO_USB_PU)\r
-\r
-#define LED_A_ON()             PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_A)\r
-#define LED_A_OFF()            PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_A)\r
-#define LED_B_ON()             PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_B)\r
-#define LED_B_OFF()            PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_B)\r
-#define LED_C_ON()             PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_C)\r
-#define LED_C_OFF()            PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_C)\r
-#define LED_D_ON()             PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_D)\r
-#define LED_D_OFF()            PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_D)\r
-#define RELAY_ON()             PIO_OUTPUT_DATA_SET = (1<<GPIO_RELAY)\r
-#define RELAY_OFF()            PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_RELAY)\r
-#define BUTTON_PRESS() !(PIO_PIN_DATA_STATUS & (1<<GPIO_BUTTON))\r
+#define USB_D_PLUS_PULLUP_OFF() AT91C_BASE_PIOA->PIO_ODR = GPIO_USB_PU\r
+\r
+#define LED_A_ON()             HIGH(GPIO_LED_A)\r
+#define LED_A_OFF()            LOW(GPIO_LED_A)\r
+#define LED_B_ON()             HIGH(GPIO_LED_B)\r
+#define LED_B_OFF()            LOW(GPIO_LED_B)\r
+#define LED_C_ON()             HIGH(GPIO_LED_C)\r
+#define LED_C_OFF()            LOW(GPIO_LED_C)\r
+#define LED_D_ON()             HIGH(GPIO_LED_D)\r
+#define LED_D_OFF()            LOW(GPIO_LED_D)\r
+#define RELAY_ON()             HIGH(GPIO_RELAY)\r
+#define RELAY_OFF()            LOW(GPIO_RELAY)\r
+#define BUTTON_PRESS() !(AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON)\r
 //--------------------------------\r
 // USB declarations\r
 \r
@@ -62,7 +107,7 @@ void UsbPacketReceived(BYTE *packet, int len);
 \r
 #define VERSION_INFORMATION_MAGIC 0x56334d50\r
 struct version_information {\r
-       int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */ \r
+       int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */\r
        char versionversion; /* Must be 1 */\r
        char present; /* 1 if the version information could be created at compile time, otherwise 0 and the remaining fields (except for magic) are empty */\r
        char clean; /* 1: Tree was clean, no local changes. 0: Tree was unclean. 2: Couldn't be determined */\r
Impressum, Datenschutz