]> git.zerfleddert.de Git - raggedstone/commitdiff
cleanup config space
authorsithglan <sithglan>
Sun, 11 Mar 2007 11:34:00 +0000 (11:34 +0000)
committersithglan <sithglan>
Sun, 11 Mar 2007 11:34:00 +0000 (11:34 +0000)
dhwk/dhwk.prj
dhwk/source/pci/config_rd_0.vhd [deleted file]
dhwk/source/pci/config_space_header.vhd

index 45171bc1799ff36582c9bacd239fe9781b02b356..9b412ffe87f814f3d8b596275e024ecb8f8fb7a3 100644 (file)
@@ -3,7 +3,6 @@ vhdl work "source/ser_par_con.vhd"
 vhdl work "source/pci/address_register.vhd"
 vhdl work "source/pci/comm_dec.vhd"
 vhdl work "source/pci/comm_fsm.vhd"
 vhdl work "source/pci/address_register.vhd"
 vhdl work "source/pci/comm_dec.vhd"
 vhdl work "source/pci/comm_fsm.vhd"
-vhdl work "source/pci/config_rd_0.vhd"
 vhdl work "source/pci/config_space_header.vhd"
 vhdl work "source/pci/connecting_fsm.vhd"
 vhdl work "source/pci/cont_fsm.vhd"
 vhdl work "source/pci/config_space_header.vhd"
 vhdl work "source/pci/connecting_fsm.vhd"
 vhdl work "source/pci/cont_fsm.vhd"
diff --git a/dhwk/source/pci/config_rd_0.vhd b/dhwk/source/pci/config_rd_0.vhd
deleted file mode 100644 (file)
index 92b6a98..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
--- J.STELZNER
--- INFORMATIK-3 LABOR
--- 23.08.2006
--- File: CONFIG_RD_0.VHD
-
-library IEEE;
-use IEEE.std_logic_1164.all;
-
-entity CONFIG_RD_0 is
-        port
-        (
-                ADDR_REG :in std_logic_vector (31 downto 0);
-                CF_RD_COM :in std_logic;
-                READ_SEL :out std_logic_vector ( 2 downto 0)
-        );
-end entity CONFIG_RD_0;
-
-architecture CONFIG_RD_0_DESIGN of CONFIG_RD_0 is
-
- --
- --
- --
- --
- --
- -- PCI Configuration Space Header
- --
- -- \ Bit
- -- \
- --Address |31 24|23 16|15 8|7 0|
- -----------------------------------------------------------------
- --00 |Device ID |Vendor ID |
- --04 |Status |Command |
- --08 |Class Code |Revision ID|
- --0C |BIST |Header Type|Latency T. |Cache L.S. |
- --10-24 |Base Address Register |
- --28 |Cardbus CIS Pointer |
- --2C |Subsystem ID |Subsystem Vendor ID |
- --30 |Expansion ROM Base Address |
- --34 |Reserved |
- --38 |Reserved |
- --3C |Max_Lat |Min_Gnt |Int_Pin |Int_Line |
- --40-FF | |
- -----------------------------------------------------------------
-
-
- --PCI Bus Commands
- --C/BE[3..0] Command Type
- --------------------------------------
- -- 0000 Interrupt Acknowledge
- -- 0001 Special Cycle
- -- 0010 I/O Read
- -- 0011 I/O Write
- -- 0100 Reserved
- -- 0101 Reserved
- -- 0110 Memory Read
- -- 0111 Memory Write
- --
- -- 1000 Reserved
- -- 1001 Reserved
- -- 1010 Configuration Read
- -- 1011 Configuration Write
- -- 1100 Memory Read Multiple
- -- 1101 Dual Address Cycle
- -- 1110 Memory Read Line
- -- 1111 Memory Write and Invalidate
-
-
- --PCI Byte Enable
- --C/BE[3..0] gueltige Datenbits
- -------------------------------
- -- 0000 AD 31..0
- -- 1000 AD 23..0
- -- 1100 AD 15..0
- -- 1110 AD 7..0
-
-        constant CMD_INT_ACK :std_logic_vector(3 downto 0) := "0000";
-        constant CMD_SP_CYC :std_logic_vector(3 downto 0) := "0001";
-        constant CMD_IO_READ :std_logic_vector(3 downto 0) := "0010";
-        constant CMD_IO_WRITE :std_logic_vector(3 downto 0) := "0011";
-        constant CMD_RES_4 :std_logic_vector(3 downto 0) := "0100";
-        constant CMD_RES_5 :std_logic_vector(3 downto 0) := "0101";
-        constant CMD_MEM_READ :std_logic_vector(3 downto 0) := "0110";
-        constant CMD_MEM_WRITE :std_logic_vector(3 downto 0) := "0111";
-        constant CMD_RES_8 :std_logic_vector(3 downto 0) := "1000";
-        constant CMD_RES_9 :std_logic_vector(3 downto 0) := "1001";
-        constant CMD_CONF_READ :std_logic_vector(3 downto 0) := "1010";
-        constant CMD_CONF_WRITE :std_logic_vector(3 downto 0) := "1011";
-        constant CMD_MEM_READ_M :std_logic_vector(3 downto 0) := "1100";
-        constant CMD_DU_ADR_CYC :std_logic_vector(3 downto 0) := "1101";
-        constant CMD_MEN_READ_L :std_logic_vector(3 downto 0) := "1110";
-        constant CMD_MEM_WRITE_I :std_logic_vector(3 downto 0) := "1111";
-
-        signal MUX :std_logic_vector(31 downto 0);
-        signal CONFIG_ADDR :std_logic_vector( 7 downto 0);
-
-begin
-
-        CONFIG_ADDR(7 downto 0) <= ADDR_REG(7 downto 0);
-
- --*******************************************************************
- --*********************** PCI Read Address **************************
- --*******************************************************************
-
-        process (CF_RD_COM, CONFIG_ADDR)
-        begin
-
-                if CF_RD_COM = '1' then
-                        if CONFIG_ADDR = X"00" then
-                                READ_SEL <= "000";
-
-                        elsif CONFIG_ADDR = X"04" then
-                                READ_SEL <= "001";
-
-                        elsif CONFIG_ADDR = X"08" then
-                                READ_SEL <= "010";
-
-                        elsif CONFIG_ADDR = X"10" then
-                                READ_SEL <= "011";
-
-                        elsif CONFIG_ADDR = X"3C" then
-                                READ_SEL <= "100";
-
-                        elsif CONFIG_ADDR = X"40" then
-                                READ_SEL <= "101";
-
-                        else
-                                READ_SEL <= "111";
-                        end if;
-                else
-                        READ_SEL <= "111";
-                end if;
-        end process;
-
-end architecture CONFIG_RD_0_DESIGN;
index 0b9817497f50f4c0776b079ab276699baef096d6..363e4c1527d371093b971e82ace51484b9b51992 100644 (file)
@@ -112,9 +112,6 @@ architecture SCHEMATIC of CONFIG_SPACE_HEADER is
         signal CONFIG_ADDR :std_logic_vector(7 downto 0);
         signal CONFIG_WRITE :std_logic_vector(3 downto 0);
 
         signal CONFIG_ADDR :std_logic_vector(7 downto 0);
         signal CONFIG_WRITE :std_logic_vector(3 downto 0);
 
-        ----
-        ----
-
         SIGNAL gnd : std_logic := '0';
         SIGNAL vcc : std_logic := '1';
 
         SIGNAL gnd : std_logic := '0';
         SIGNAL vcc : std_logic := '1';
 
@@ -122,17 +119,10 @@ architecture SCHEMATIC of CONFIG_SPACE_HEADER is
         signal CONF_WR_10H : std_logic;
         signal CONF_WR_3CH : std_logic;
         signal CONF_READ_SEL : std_logic_vector (2 downto 0);
         signal CONF_WR_10H : std_logic;
         signal CONF_WR_3CH : std_logic;
         signal CONF_READ_SEL : std_logic_vector (2 downto 0);
-        signal CONF_DATA_04H_DUMMY : std_logic_vector (31 downto 0);
         signal CONF_DATA_3CH : std_logic_vector (31 downto 0);
         signal CONF_DATA_08H : std_logic_vector (31 downto 0);
         signal CONF_DATA_00H : std_logic_vector (31 downto 0);
 
         signal CONF_DATA_3CH : std_logic_vector (31 downto 0);
         signal CONF_DATA_08H : std_logic_vector (31 downto 0);
         signal CONF_DATA_00H : std_logic_vector (31 downto 0);
 
-        component CONFIG_RD_0
-                Port ( ADDR_REG : In std_logic_vector (31 downto 0);
-                       CF_RD_COM : In std_logic;
-                       READ_SEL : Out std_logic_vector (2 downto 0) );
-        end component;
-
 begin
         CONF_DATA_00H <= CONF_DEVICE_ID & VENDOR_ID;
         CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID;
 begin
         CONF_DATA_00H <= CONF_DEVICE_ID & VENDOR_ID;
         CONF_DATA_08H <= CONF_CLASS_CODE & REVISION_ID;
@@ -152,11 +142,6 @@ begin
         CONF_BAS_ADDR_REG(3 downto 2) <= "00";-- IO Bereich = 16 BYTE
         CONF_DATA_10H <= CONF_BAS_ADDR_REG;
 
         CONF_BAS_ADDR_REG(3 downto 2) <= "00";-- IO Bereich = 16 BYTE
         CONF_DATA_10H <= CONF_BAS_ADDR_REG;
 
-        I9 : CONFIG_RD_0
-        Port Map ( ADDR_REG(31 downto 0)=>ADDR_REG(31 downto 0),
-                   CF_RD_COM=>CF_RD_COM,
-                   READ_SEL(2 downto 0)=>CONF_READ_SEL(2 downto 0) );
-
         process (PCI_CLOCK,PCI_RSTn)
         begin
         if PCI_RSTn = '0' then
         process (PCI_CLOCK,PCI_RSTn)
         begin
         if PCI_RSTn = '0' then
@@ -328,4 +313,34 @@ begin
         CONF_WR_3CH <= CONFIG_WRITE(2);
         --CONF_WR_40H <= CONFIG_WRITE(3);
 
         CONF_WR_3CH <= CONFIG_WRITE(2);
         --CONF_WR_40H <= CONFIG_WRITE(3);
 
+        process (CF_RD_COM, CONFIG_ADDR)
+        begin
+
+                if CF_RD_COM = '1' then
+                        if CONFIG_ADDR = X"00" then
+                                CONF_READ_SEL <= "000";
+
+                        elsif CONFIG_ADDR = X"04" then
+                                CONF_READ_SEL <= "001";
+
+                        elsif CONFIG_ADDR = X"08" then
+                                CONF_READ_SEL <= "010";
+
+                        elsif CONFIG_ADDR = X"10" then
+                                CONF_READ_SEL <= "011";
+
+                        elsif CONFIG_ADDR = X"3C" then
+                                CONF_READ_SEL <= "100";
+
+                        elsif CONFIG_ADDR = X"40" then
+                                CONF_READ_SEL <= "101";
+
+                        else
+                                CONF_READ_SEL <= "111";
+                        end if;
+                else
+                        CONF_READ_SEL <= "111";
+                end if;
+        end process;
+
 end SCHEMATIC;
 end SCHEMATIC;
Impressum, Datenschutz