]>
Commit | Line | Data |
---|---|---|
1 | #include <stdio.h> | |
2 | #include <ftdi.h> | |
3 | #include <unistd.h> | |
4 | #include "usb-driver.h" | |
5 | #include "jtagkey.h" | |
6 | ||
7 | #define USBBUFSIZE 4096 | |
8 | ||
9 | static struct ftdi_context ftdic; | |
10 | static unsigned int usb_maxlen = 0; | |
11 | static unsigned char bitbang_mode; | |
12 | ||
13 | int jtagkey_init(unsigned short vid, unsigned short pid) { | |
14 | int ret = 0; | |
15 | unsigned char c; | |
16 | ||
17 | if ((ret = ftdi_init(&ftdic)) != 0) { | |
18 | fprintf(stderr, "unable to initialise libftdi: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
19 | return ret; | |
20 | } | |
21 | ||
22 | if ((ret = ftdi_usb_open(&ftdic, vid, pid)) != 0) { | |
23 | fprintf(stderr, "unable to open ftdi device: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
24 | return ret; | |
25 | } | |
26 | ||
27 | if ((ret = ftdi_usb_reset(&ftdic)) != 0) { | |
28 | fprintf(stderr, "unable reset device: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
29 | return ret; | |
30 | } | |
31 | ||
32 | if ((ret = ftdi_set_interface(&ftdic, INTERFACE_A)) != 0) { | |
33 | fprintf(stderr, "unable to set interface: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
34 | return ret; | |
35 | } | |
36 | ||
37 | ||
38 | if ((ret = ftdi_write_data_get_chunksize(&ftdic, &usb_maxlen)) != 0) { | |
39 | fprintf(stderr, "unable to get write chunksize: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
40 | return ret; | |
41 | } | |
42 | ||
43 | if ((ret = ftdi_set_latency_timer(&ftdic, 1)) != 0) { | |
44 | fprintf(stderr, "unable to set latency timer: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
45 | return ret; | |
46 | } | |
47 | ||
48 | if ((ret = ftdi_set_baudrate(&ftdic, 500000)) != 0) { | |
49 | fprintf(stderr, "unable to set baudrate: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
50 | return ret; | |
51 | } | |
52 | ||
53 | c = 0x00; | |
54 | ftdi_write_data(&ftdic, &c, 1); | |
55 | ||
56 | if ((ret = ftdi_set_bitmode(&ftdic, JTAGKEY_TCK|JTAGKEY_TDI|JTAGKEY_TMS|JTAGKEY_OEn, BITMODE_BITBANG)) != 0) { | |
57 | fprintf(stderr, "unable to enable bitbang mode: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
58 | return ret; | |
59 | } | |
60 | ||
61 | bitbang_mode = BITMODE_BITBANG; | |
62 | ||
63 | if ((ret = ftdi_usb_purge_buffers(&ftdic)) != 0) { | |
64 | fprintf(stderr, "unable to purge buffers: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
65 | return ret; | |
66 | } | |
67 | ||
68 | return ret; | |
69 | } | |
70 | ||
71 | void jtagkey_close() { | |
72 | ftdi_disable_bitbang(&ftdic); | |
73 | ftdi_usb_close(&ftdic); | |
74 | ftdi_deinit(&ftdic); | |
75 | } | |
76 | ||
77 | static int jtagkey_set_bbmode(unsigned char mode) { | |
78 | int ret = 0; | |
79 | ||
80 | if (bitbang_mode != mode) { | |
81 | DPRINTF("switching bitbang-mode!\n"); | |
82 | ||
83 | /* Wait for the latency-timer to kick in */ | |
84 | usleep(2); | |
85 | if ((ret = ftdi_set_bitmode(&ftdic, JTAGKEY_TCK|JTAGKEY_TDI|JTAGKEY_TMS|JTAGKEY_OEn, mode)) != 0) { | |
86 | fprintf(stderr, "unable to enable bitbang mode: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
87 | return ret; | |
88 | } | |
89 | if ((ret = ftdi_usb_purge_buffers(&ftdic)) != 0) { | |
90 | fprintf(stderr, "unable to purge buffers: %d (%s)\n", ret, ftdi_get_error_string(&ftdic)); | |
91 | return ret; | |
92 | } | |
93 | /* Wait for the FTDI2232 to settle */ | |
94 | usleep(2); | |
95 | ||
96 | bitbang_mode = mode; | |
97 | } | |
98 | ||
99 | return ret; | |
100 | } | |
101 | ||
102 | void jtagkey_state(unsigned char data) { | |
103 | fprintf(stderr,"Pins high: "); | |
104 | ||
105 | if (data & JTAGKEY_TCK) | |
106 | fprintf(stderr,"TCK "); | |
107 | ||
108 | if (data & JTAGKEY_TDI) | |
109 | fprintf(stderr,"TDI "); | |
110 | ||
111 | if (data & JTAGKEY_TDO) | |
112 | fprintf(stderr,"TDO "); | |
113 | ||
114 | if (data & JTAGKEY_TMS) | |
115 | fprintf(stderr,"TMS "); | |
116 | ||
117 | if (data & JTAGKEY_VREF) | |
118 | fprintf(stderr,"VREF "); | |
119 | ||
120 | fprintf(stderr,"\n"); | |
121 | } | |
122 | ||
123 | int jtagkey_transfer(WD_TRANSFER *tr, int fd, unsigned int request, int ppbase, int ecpbase, int num) { | |
124 | int ret = 0; | |
125 | int i; | |
126 | int nread = 0; | |
127 | unsigned long port; | |
128 | unsigned char val; | |
129 | static unsigned char last_data = 0; | |
130 | static unsigned char last_write = 0x00; | |
131 | static unsigned char writebuf[USBBUFSIZE], *writepos = writebuf; | |
132 | static unsigned char readbuf[USBBUFSIZE], *readpos; | |
133 | unsigned char data, prev_data; | |
134 | ||
135 | /* Count reads */ | |
136 | for (i = 0; i < num; i++) | |
137 | if (tr[i].cmdTrans == PP_READ) | |
138 | nread++; | |
139 | ||
140 | /* Write combining */ | |
141 | if ((writepos-writebuf > sizeof(writebuf)-num) || (nread && writepos-writebuf)) { | |
142 | unsigned char *pos = writebuf; | |
143 | int len; | |
144 | DPRINTF("writing %d bytes due to %d following reads in %d chunks or full buffer\n", writepos-writebuf, nread, num); | |
145 | ||
146 | jtagkey_set_bbmode(BITMODE_BITBANG); | |
147 | while (pos < writepos) { | |
148 | len = writepos-pos; | |
149 | ||
150 | if (len > usb_maxlen) | |
151 | len = usb_maxlen; | |
152 | ||
153 | DPRINTF("combined write of %d/%d\n",len,writepos-pos); | |
154 | ftdi_write_data(&ftdic, pos, len); | |
155 | pos += len; | |
156 | } | |
157 | ||
158 | DPRINTF("read %d/%d bytes\n", i, writepos-writebuf); | |
159 | writepos = writebuf; | |
160 | } | |
161 | ||
162 | for (i = 0; i < num; i++) { | |
163 | DPRINTF("dwPort: 0x%lx, cmdTrans: %lu, dwbytes: %ld, fautoinc: %ld, dwoptions: %ld\n", | |
164 | (unsigned long)tr[i].dwPort, tr[i].cmdTrans, tr[i].dwBytes, | |
165 | tr[i].fAutoinc, tr[i].dwOptions); | |
166 | ||
167 | port = (unsigned long)tr[i].dwPort; | |
168 | val = tr[i].Data.Byte; | |
169 | ||
170 | #ifdef DEBUG | |
171 | if (tr[i].cmdTrans == 13) | |
172 | DPRINTF("write byte: %d\n", val); | |
173 | #endif | |
174 | ||
175 | /* Pad writebuf for read-commands in stream */ | |
176 | *writepos = last_data; | |
177 | prev_data = last_data; | |
178 | ||
179 | if (port == ppbase + PP_DATA) { | |
180 | DPRINTF("data port\n"); | |
181 | ||
182 | data = 0x00; | |
183 | switch(tr[i].cmdTrans) { | |
184 | case PP_READ: | |
185 | ret = 0; /* We don't support reading of the data port */ | |
186 | break; | |
187 | ||
188 | case PP_WRITE: | |
189 | if (val & PP_TDI) { | |
190 | data |= JTAGKEY_TDI; | |
191 | DPRINTF("TDI\n"); | |
192 | } else { | |
193 | DPRINTF("!TDI\n"); | |
194 | } | |
195 | if (val & PP_TCK) { | |
196 | data |= JTAGKEY_TCK; | |
197 | DPRINTF("TCK\n"); | |
198 | } else { | |
199 | DPRINTF("!TCK\n"); | |
200 | } | |
201 | if (val & PP_TMS) { | |
202 | data |= JTAGKEY_TMS; | |
203 | DPRINTF("TMS\n"); | |
204 | } else { | |
205 | DPRINTF("!TMS\n"); | |
206 | } | |
207 | if (val & PP_CTRL) { | |
208 | data = JTAGKEY_OEn; | |
209 | DPRINTF("CTRL\n"); | |
210 | } else { | |
211 | DPRINTF("!CTRL\n"); | |
212 | } | |
213 | ||
214 | if (val & PP_PROG) { | |
215 | DPRINTF("PROG\n"); | |
216 | } else { | |
217 | DPRINTF("!PROG\n"); | |
218 | } | |
219 | ||
220 | *writepos = data; | |
221 | ||
222 | last_data = data; | |
223 | last_write = val; | |
224 | break; | |
225 | ||
226 | default: | |
227 | fprintf(stderr,"!!!Unsupported TRANSFER command: %lu!!!\n", tr[i].cmdTrans); | |
228 | ret = -1; | |
229 | break; | |
230 | } | |
231 | } | |
232 | ||
233 | if (nread || (*writepos != prev_data)) | |
234 | writepos++; | |
235 | } | |
236 | ||
237 | if (nread) | |
238 | { | |
239 | DPRINTF("writing %d bytes\n", writepos-writebuf); | |
240 | ||
241 | *writepos = last_data; | |
242 | writepos++; | |
243 | ||
244 | jtagkey_set_bbmode(BITMODE_SYNCBB); | |
245 | ftdi_write_data(&ftdic, writebuf, writepos-writebuf); | |
246 | ||
247 | i = 0; | |
248 | while (i < writepos-writebuf) { | |
249 | i += ftdi_read_data(&ftdic, readbuf, sizeof(readbuf)); | |
250 | } | |
251 | ||
252 | #ifdef DEBUG | |
253 | DPRINTF("write: "); | |
254 | hexdump(writebuf, writepos-writebuf); | |
255 | DPRINTF("read: "); | |
256 | hexdump(readbuf, i); | |
257 | #endif | |
258 | ||
259 | writepos = writebuf; | |
260 | } else { | |
261 | return ret; | |
262 | } | |
263 | ||
264 | readpos = readbuf; | |
265 | ||
266 | for (i = 0; i < num; i++) { | |
267 | DPRINTF("dwPort: 0x%lx, cmdTrans: %lu, dwbytes: %ld, fautoinc: %ld, dwoptions: %ld\n", | |
268 | (unsigned long)tr[i].dwPort, tr[i].cmdTrans, tr[i].dwBytes, | |
269 | tr[i].fAutoinc, tr[i].dwOptions); | |
270 | ||
271 | port = (unsigned long)tr[i].dwPort; | |
272 | val = tr[i].Data.Byte; | |
273 | readpos++; | |
274 | ||
275 | if (port == ppbase + PP_DATA) { | |
276 | if (tr[i].cmdTrans == PP_WRITE) { | |
277 | last_write = val; | |
278 | } | |
279 | } else if (port == ppbase + PP_STATUS) { | |
280 | DPRINTF("status port (last write: 0x%x)\n", last_write); | |
281 | switch(tr[i].cmdTrans) { | |
282 | case PP_READ: | |
283 | data = *readpos; | |
284 | ||
285 | #ifdef DEBUG | |
286 | DPRINTF("READ: 0x%x\n", data); | |
287 | jtagkey_state(data); | |
288 | #endif | |
289 | ||
290 | val = 0x00; | |
291 | if ((data & JTAGKEY_TDO) && (last_write & PP_PROG)) | |
292 | val |= PP_TDO; | |
293 | ||
294 | if (!(last_write & PP_PROG)) | |
295 | val |= 0x08; | |
296 | ||
297 | if (last_write & 0x40) | |
298 | val |= 0x20; | |
299 | else | |
300 | val |= 0x80; | |
301 | break; | |
302 | ||
303 | case PP_WRITE: | |
304 | ret = 0; /* Status Port is readonly */ | |
305 | break; | |
306 | ||
307 | default: | |
308 | fprintf(stderr,"!!!Unsupported TRANSFER command: %lu!!!\n", tr[i].cmdTrans); | |
309 | ret = -1; | |
310 | break; | |
311 | } | |
312 | } else { | |
313 | ret = 0; | |
314 | } | |
315 | ||
316 | tr[i].Data.Byte = val; | |
317 | ||
318 | DPRINTF("dwPortReturn: 0x%lx, cmdTrans: %lu, dwbytes: %ld, fautoinc: %ld, dwoptions: %ld\n", | |
319 | (unsigned long)tr[i].dwPort, tr[i].cmdTrans, tr[i].dwBytes, | |
320 | tr[i].fAutoinc, tr[i].dwOptions); | |
321 | #ifdef DEBUG | |
322 | if (tr[i].cmdTrans == 10) | |
323 | DPRINTF("read byte: %d\n", tr[i].Data.Byte); | |
324 | #endif | |
325 | } | |
326 | ||
327 | return ret; | |
328 | } |