other cables

[usb-driver] / index.html

diff --git a/index.html b/index.html
index 943dd2682a93d3d4ec16cb39a91815f7bcc03d00..922bcfc3ed6fa2b8fd4f9be88b283d6f706c484c 100644 (file)
--- a/index.html
+++ b/index.html
@@ -8,7 +8,7 @@
                <H2>About</H2>
                <P>
                When using <a href="http://www.xilinx.com">XILINX</a> JTAG software like Impact, Chipscope and XMD
-               on Linux, the proprietary kernel <i>windrvr</i> module from <a href="http://www.jungo.com">Jungo</a>
+               on Linux, the proprietary kernel module <i>windrvr</i> from <a href="http://www.jungo.com">Jungo</a>
                is needed to access the parallel- or usb-cable.
                As this module does not work with current linux kernel versions (&gt; 2.6.18) a library was developed,
                which emulates the module in userspace and allows the tools to access the JTAG cable without the need
@@ -16,7 +16,7 @@
                </P>
                <P>
                The library uses <a href="http://libusb.sourceforge.net/">libusb</a> to access USB devices and the
-               <a href="http://www.linuxfocus.org/common/src/article205/ppdev.html">ppdev</a> interface to communicate
+               <a href="http://people.redhat.com/twaugh/parport/html/x623.html">ppdev</a> interface to communicate
                with parallel cables. The parallel part currently only supports Parallel Cable III mode (and PCIV in
                PCIII compatibility mode) as the faster PCIV modes use another kernel module which is not emulated by
                this library. So you are limited to a 200kHz JTAG clock when using Parallel Cable IV with this software.
@@ -36,6 +36,12 @@
                        <li><a href="http://www.trenz-electronic.de/">Trenz TE0149-01</a> Parallel Cable III clone</li>
                        <li><a href="http://www.digilentinc.com/Products/Catalog.cfm?Nav1=Products&amp;Nav2=Cables&amp;Cat=Cable">Digilent JTAG3</a> Parallel Cable III clone</li>
                </ul>
+               These cables should work but have not yet been tested:
+               <ul>
+                       <li>XILINX Platform Cable USB DLC9 and DLC9G</li>
+                       <li>Integrated Platform Cable USB on other development boards</li>
+                       <li>other Parallel Cable III clones</li>
+               </ul>
                <H2>Supported Software</H2>
                The following software is reported to work with this driver:
                <ul>
@@ -65,6 +71,6 @@
                        <li><a href="http://www.ixo.de/info/usb_jtag/">USB JTAG adapter</a> by Kolja Waschk, opensource integration of the XILINX platform cable USB into OpenOCD and openwince JTAG Tools</li>
                </ul>
                <HR>
-               <FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.5 2007-04-06 19:45:18 michael Exp $</I></FONT>
+               <FONT SIZE="-1"><I><A HREF="mailto:cabledriver@zerfleddert.de">Michael Gernoth</A>, $Id: index.html,v 1.8 2007-04-09 10:19:11 michael Exp $</I></FONT>
        </BODY>
 </HTML>