]> git.zerfleddert.de Git - fnordlicht-mini/blob - firmware/fnordlicht-controller/uart.c
c23f747c99302ba7a1b4b89d000ca5998b47720f
[fnordlicht-mini] / firmware / fnordlicht-controller / uart.c
1 /* vim:ts=4 sts=4 et tw=80
2 *
3 * fnordlicht firmware
4 *
5 * for additional information please
6 * see http://lochraster.org/fnordlichtmini
7 *
8 * (c) by Alexander Neumann <alexander@bumpern.de>
9 * Lars Noschinski <lars@public.noschinski.de>
10 *
11 * This program is free software: you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License version 3 as published by
13 * the Free Software Foundation.
14 *
15 * This program is distributed in the hope that it will be useful, but WITHOUT
16 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
18 * more details.
19 *
20 * You should have received a copy of the GNU General Public License along with
21 * this program. If not, see <http://www.gnu.org/licenses/>.
22 */
23
24 #include "globals.h"
25
26 #if CONFIG_SERIAL
27
28 #include "../common/io.h"
29 #include <avr/interrupt.h>
30
31 #include "globals.h"
32 #include "../common/common.h"
33 #include "fifo.h"
34 #include "uart.h"
35
36 /* define uart mode (8N1) */
37 #if defined(__AVR_ATmega8__)
38 /* in atmega8, we need a special switching bit
39 * for addressing UCSRC */
40 #define UART_UCSRC _BV(URSEL) | _BV(UCSZ0) | _BV(UCSZ1)
41
42 #elif defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__)
43 /* in atmega88, this isn't needed any more */
44 #define UART_UCSRC _BV(_UCSZ0_UART0) | _BV(_UCSZ1_UART0)
45 #endif
46
47 /* global variables */
48 volatile struct global_uart_t global_uart;
49
50 /** output one character */
51 void uart_putc(uint8_t data)
52 {
53 /* store data */
54 fifo_enqueue((fifo_t *)&global_uart.tx, data);
55
56 /* enable interrupt */
57 _UCSRB_UART0 |= _BV(_UDRIE_UART0);
58 }
59
60 /** init the hardware uart */
61 void uart_init(void)
62 {
63 #define BAUD CONFIG_SERIAL_BAUDRATE
64 #include <util/setbaud.h>
65
66 /* set baud rate */
67 _UBRRH_UART0 = UBRRH_VALUE;
68 _UBRRL_UART0 = UBRRL_VALUE;
69
70 #if USE_2X
71 _UCSRA_UART0 |= (1 << _U2X_UART0);
72 #endif
73
74 /* set mode */
75 _UCSRC_UART0 = UART_UCSRC;
76
77 /* enable transmitter, receiver and receiver complete interrupt */
78 _UCSRB_UART0 = _BV(_TXEN_UART0) | _BV(_RXEN_UART0) | _BV(_RXCIE_UART0);
79
80 /* init fifos */
81 fifo_init((fifo_t *)&global_uart.rx);
82 fifo_init((fifo_t *)&global_uart.tx);
83 }
84
85
86 /** interrupts*/
87
88 /** uart receive interrupt */
89 ISR(_SIG_UART_RECV_UART0)
90 {
91
92 /* store received data */
93 fifo_enqueue((fifo_t *)&global_uart.rx, _UDR_UART0);
94
95 }
96
97 /** uart data register empty interrupt */
98 ISR(_SIG_UART_DATA_UART0)
99 {
100
101 /* load next byte to transfer */
102 _UDR_UART0 = fifo_dequeue((fifo_t *)&global_uart.tx);
103
104 /* check if this interrupt is still needed */
105 if ( fifo_fill((fifo_t *)&global_uart.tx) == 0) {
106 /* disable this interrupt */
107 _UCSRB_UART0 &= ~_BV(_UDRIE_UART0);
108 }
109
110 }
111
112
113 #endif
Impressum, Datenschutz