delete! delete! delete!

diff --git a/firmware/fnordlicht-firmware/config.mk.template b/firmware/fnordlicht-firmware/config.mk.template
index 0801f073c62254ba6413f57d087c415df633ef58..feb453ff152c060b22a95761105440a39974d8be 100644 (file)
--- a/firmware/fnordlicht-firmware/config.mk.template
+++ b/firmware/fnordlicht-firmware/config.mk.template
@@ -67,8 +67,3 @@
 # default baudrate
 #CONFIG_SERIAL_BAUDRATE = 19200
 
 # default baudrate
 #CONFIG_SERIAL_BAUDRATE = 19200
 

-# configure master mode:
-#   0   disable master mode completely
-#   1   check if master mode jumper is set (default)
-#   2   always act as master
-#CONFIG_MASTER_MODE = 1

diff --git a/firmware/fnordlicht-firmware/globals.h b/firmware/fnordlicht-firmware/globals.h
index d105874916517359547860c3aa4fa6c5d45125c4..56fdd00f1362255bfd54795f5edd24b6443c3ae6 100644 (file)
--- a/firmware/fnordlicht-firmware/globals.h
+++ b/firmware/fnordlicht-firmware/globals.h
@@ -73,18 +73,6 @@
 #define REMOTE_INT_PORT D
 #define REMOTE_INT_PIN PD2
 
 #define REMOTE_INT_PORT D
 #define REMOTE_INT_PIN PD2
 

-/* configure jumper pins for remote master mode */
-#define REMOTE_MASTER_PORT C
-#define REMOTE_MASTER_PIN1 PC2
-#define REMOTE_MASTER_PIN2 PC3
-/* configure master mode */
-/* use 1 as address for the second device */
-#define MASTER_MODE_FIRST_ADDRESS 1
-/* wait 200ms before sending sync sequence */
-#define MASTER_WAIT_BEFORE_SYNC 20
-/* wait 15 min (900s) between program changes */
-#define MASTER_MODE_SLEEP 900
-

 /* configure storage bufer size */
 #define STORAGE_BUFFER_SIZE 13
 
 /* configure storage bufer size */
 #define STORAGE_BUFFER_SIZE 13
 

diff --git a/firmware/fnordlicht-firmware/remote.c b/firmware/fnordlicht-firmware/remote.c
index dcef098c7336e3960435e21bd41c3e36b0157948..016a866bf61184dade70c72a57c7667f99abe7e8 100644 (file)
--- a/firmware/fnordlicht-firmware/remote.c
+++ b/firmware/fnordlicht-firmware/remote.c
@@ -45,12 +45,6 @@
 #define R_PIN _INPORT(REMOTE_INT_PORT)
 #define INTPIN REMOTE_INT_PIN
 
 #define R_PIN _INPORT(REMOTE_INT_PORT)
 #define INTPIN REMOTE_INT_PIN
 

-#define M_PORT _OUTPORT(REMOTE_MASTER_PORT)
-#define M_DDR _DDRPORT(REMOTE_MASTER_PORT)
-#define M_PIN _INPORT(REMOTE_MASTER_PORT)
-#define M_PIN1 REMOTE_MASTER_PIN1
-#define M_PIN2 REMOTE_MASTER_PIN2
-

 struct remote_state_t
 {
     /* serial communication */
 struct remote_state_t
 {
     /* serial communication */


@@ -95,14 +89,6 @@ static void parse_powerdown(void);
 
 void remote_init(void)
 {
 
 void remote_init(void)
 {

-    /* master mode check: check if PIN2 pulls down PIN1 */
-    /* configure M_PIN1 as input with pullup */
-    M_DDR &= ~_BV(M_PIN1);
-    M_PORT |= _BV(M_PIN1);
-    /* configure M_PIN2 as output, set low */
-    M_DDR |= _BV(M_PIN2);
-    M_PORT &= ~_BV(M_PIN2);
-

     /* initialize offsets */
     global_remote.offsets.saturation = 255;
     global_remote.offsets.value = 255;
     /* initialize offsets */
     global_remote.offsets.saturation = 255;
     global_remote.offsets.value = 255;