add humamn readable command-aliases

diff --git a/fs20pcs.c b/fs20pcs.c
index 10f97180058d44cb06a661c2ebce12b58646d14f..d74d5b0976ae32b62b6e2d60d750f51f1aa851b8 100644 (file)
--- a/fs20pcs.c
+++ b/fs20pcs.c
@@ -269,6 +269,40 @@ int parse_addr(char *ad)
        return addr;
 }
 
        return addr;
 }
 

+int parse_command(char *cmd)
+{
+       int command = -1;
+       char *ep;
+       unsigned long val;
+
+       if (cmd == NULL)
+               return -1;
+
+       if (!strcasecmp(cmd, "off")) {
+               command = 0x00;
+       } else if (!strcasecmp(cmd, "on")) {
+               command = 0x11;
+       } else if (!strcasecmp(cmd, "toggle")) {
+               command = 0x12;
+       } else if (!strcasecmp(cmd, "dimup")) {
+               command = 0x13;
+       } else if (!strcasecmp(cmd, "dimdown")) {
+               command = 0x14;
+       } else if (!strcasecmp(cmd, "on-for-timer")) {
+               command = 0x39;
+       } else {
+               val = strtoul(cmd, &ep, 16);
+               if (*ep != '\0') {
+                       fprintf(stderr, "Not a 1 byte hexstring or alias: %s\n", cmd);
+                       return -1;
+               }
+
+               command = val & 0xff;
+       }
+
+       return command;
+}
+

 void syntax(char *prog)
 {
        fprintf(stderr, "Syntax: %s options\n\n", prog);
 void syntax(char *prog)
 {
        fprintf(stderr, "Syntax: %s options\n\n", prog);


@@ -277,42 +311,44 @@ void syntax(char *prog)
        fprintf(stderr, "\t-x\t\tabort sending long press\n");
        fprintf(stderr, "\t-h [ELV|hex]\thousecode in ELV- or hex-notation\n");
        fprintf(stderr, "The following options need an housecode:\n");
        fprintf(stderr, "\t-x\t\tabort sending long press\n");
        fprintf(stderr, "\t-h [ELV|hex]\thousecode in ELV- or hex-notation\n");
        fprintf(stderr, "The following options need an housecode:\n");

-       fprintf(stderr, "\t-a [ELV|hex]\tsend commands to device at specified address\n");
-       fprintf(stderr, "\t-s hex\t\tsend command byte\n");
+       fprintf(stderr, "\t-a [ELV|hex]\tdestination address\n");
+       fprintf(stderr, "\t-s [hex|alias]\tsend command byte\n");

        fprintf(stderr, "\t-e hex\t\textension byte for command\n");
        fprintf(stderr, "\t-r n\t\trepeat sending n times\n");
        fprintf(stderr, "\nCommand bytes (without extension byte):\n");
        fprintf(stderr, "\t-e hex\t\textension byte for command\n");
        fprintf(stderr, "\t-r n\t\trepeat sending n times\n");
        fprintf(stderr, "\nCommand bytes (without extension byte):\n");

-       fprintf(stderr, "0x00\t\tswitch off\n");
-       fprintf(stderr, "0x01-0x10\tswitch on dimmed (0x01: 6.25%%, 0x02: 12.5%%, ..., 0x10: 100%%)\n");
-       fprintf(stderr, "0x11\t\tswitch on\n");
-       fprintf(stderr, "0x12\t\ttoggle\n");
-       fprintf(stderr, "0x13\t\tdimup\n");
-       fprintf(stderr, "0x14\t\tdimdown\n");
-       fprintf(stderr, "0x15\t\tdimup, pause, dimdown, pause, ...\n");
-       fprintf(stderr, "0x16\t\tstart/stop programming internal timer\n");
-       fprintf(stderr, "0x17\t\tlearn housecode/address\n");
-       fprintf(stderr, "0x18\t\toff for internal timer, then back on with current level\n");
-       fprintf(stderr, "0x19\t\ton (100%%) for internal timer, then off\n");
-       fprintf(stderr, "0x1a\t\ton (old level) for internal timer, then off\n");
-       fprintf(stderr, "0x1b\t\tfactory reset\n");
-       fprintf(stderr, "0x1e\t\ton (100%%) for internal timer, then old level\n");
-       fprintf(stderr, "0x1f\t\ton (old level) for internal timer, then old state\n");
+       fprintf(stderr, "hex\t\talias\tdescription\n");
+       fprintf(stderr, "0x00\t\toff\tswitch off\n");
+       fprintf(stderr, "0x01-0x10\t\tswitch on dimmed (0x01: 6.25%%, 0x02: 12.5%%, ..., 0x10: 100%%)\n");
+       fprintf(stderr, "0x11\t\ton\tswitch on\n");
+       fprintf(stderr, "0x12\t\ttoggle\ttoggle\n");
+       fprintf(stderr, "0x13\t\tdimup\tdimup\n");
+       fprintf(stderr, "0x14\t\tdimdown\tdimdown\n");
+       fprintf(stderr, "0x15\t\t\tdimup, pause, dimdown, pause, ...\n");
+       fprintf(stderr, "0x16\t\t\tstart/stop programming internal timer\n");
+       fprintf(stderr, "0x17\t\t\tlearn housecode/address\n");
+       fprintf(stderr, "0x18\t\t\toff for internal timer, then back on with current level\n");
+       fprintf(stderr, "0x19\t\t\ton (100%%) for internal timer, then off\n");
+       fprintf(stderr, "0x1a\t\t\ton (old level) for internal timer, then off\n");
+       fprintf(stderr, "0x1b\t\t\tfactory reset\n");
+       fprintf(stderr, "0x1e\t\t\ton (100%%) for internal timer, then old level\n");
+       fprintf(stderr, "0x1f\t\t\ton (old level) for internal timer, then old state\n");

        fprintf(stderr, "\nCommand bytes (with timer as extension byte):\n");
        fprintf(stderr, "\nCommand bytes (with timer as extension byte):\n");

-       fprintf(stderr, "0x20\t\tdim down to off while timer is running\n");
-       fprintf(stderr, "0x21-0x30\tdim to (0x01: 6.25%%, 0x02: 12.5%%, ..., 0x10: 100%%) while timer is running\n");
-       fprintf(stderr, "0x31\t\tdim to last level while timer is running\n");
-       fprintf(stderr, "0x32\t\tdim to off, then after timer dim to off\n");
-       fprintf(stderr, "0x33\t\tdimup now and switch off after timer\n");
-       fprintf(stderr, "0x34\t\tdimdown now and switch off after timer\n");
-       fprintf(stderr, "0x35\t\tdimup or dimdown (toggle) and switch off after timer\n");
-       fprintf(stderr, "0x36\t\tprogram internal timer\n");
-       fprintf(stderr, "0x38\t\toff for timer, then back on with current level\n");
-       fprintf(stderr, "0x39\t\ton (100%%) for timer, then off\n");
-       fprintf(stderr, "0x3a\t\ton (old level) for timer, then off\n");
-       fprintf(stderr, "0x3c\t\tprogram internal ramp-up-time\n");
-       fprintf(stderr, "0x3d\t\tprogram internal ramp-down-time\n");
-       fprintf(stderr, "0x3e\t\ton (100%%) for timer, then old level\n");
-       fprintf(stderr, "0x3f\t\ton (old level) for timer, then old state\n");
+       fprintf(stderr, "hex\t\talias\tdescription\n");
+       fprintf(stderr, "0x20\t\t\tdim down to off while timer is running\n");
+       fprintf(stderr, "0x21-0x30\t\tdim to (0x01: 6.25%%, 0x02: 12.5%%, ..., 0x10: 100%%) while timer is running\n");
+       fprintf(stderr, "0x31\t\t\tdim to last level while timer is running\n");
+       fprintf(stderr, "0x32\t\t\tdim to off, then after timer dim to off\n");
+       fprintf(stderr, "0x33\t\t\tdimup now and switch off after timer\n");
+       fprintf(stderr, "0x34\t\t\tdimdown now and switch off after timer\n");
+       fprintf(stderr, "0x35\t\t\tdimup or dimdown (toggle) and switch off after timer\n");
+       fprintf(stderr, "0x36\t\t\tprogram internal timer\n");
+       fprintf(stderr, "0x38\t\t\toff for timer, then back on with current level\n");
+       fprintf(stderr, "0x39\ton-for-timer\ton (100%%) for timer, then off\n");
+       fprintf(stderr, "0x3a\t\t\ton (old level) for timer, then off\n");
+       fprintf(stderr, "0x3c\t\t\tprogram internal ramp-up-time\n");
+       fprintf(stderr, "0x3d\t\t\tprogram internal ramp-down-time\n");
+       fprintf(stderr, "0x3e\t\t\ton (100%%) for timer, then old level\n");
+       fprintf(stderr, "0x3f\t\t\ton (old level) for timer, then old state\n");

 };
 
 enum {
 };
 
 enum {


@@ -335,7 +371,7 @@ int main(int argc, char **argv)
        int err;
        int opt;
        int action = NO_ACTION;
        int err;
        int opt;
        int action = NO_ACTION;

-       uint8_t command = 0x00;
+       int command = -1;

        uint8_t extension = 0x00;
        uint8_t repeat = 0;
        int addr = -1;
        uint8_t extension = 0x00;
        uint8_t repeat = 0;
        int addr = -1;


@@ -358,8 +394,8 @@ int main(int argc, char **argv)
                                DUPLICATE_ACTION;
                                action = SEND_COMMAND;
 
                                DUPLICATE_ACTION;
                                action = SEND_COMMAND;
 

-                               command = strtoul(optarg, &ep, 16);
-                               if (*ep != '\0') {
+                               command = parse_command(optarg);
+                               if (command == -1) {

                                        fprintf(stderr, "Can't parse command!\n");
                                        exit(EXIT_FAILURE);
                                }
                                        fprintf(stderr, "Can't parse command!\n");
                                        exit(EXIT_FAILURE);
                                }