obj-m += kexec_load.o
kexec_load-objs := kexec.o machine_kexec.o idmap.o sys.o core.o relocate_kernel.o \
- proc-v7.o tlb-v7.o cache-v7.o abort-ev7.o pabort-v7.o copypage-v6.o entry-common.o driver_sys.o
+ proc-v7.o tlb-v7.o cache-v7.o abort-ev7.o pabort-v7.o copypage-v6.o driver_sys.o
all:
PATH=$(CROSS_PATH):$(PATH) CROSS_COMPILE=$(CROSS_COMPILE) ARCH=$(ARCH) make -C $(KDIR) M=$(PWD) modules
* V6 code adjusts the returned DFSR.
* New designs should not need to patch up faults.
*/
+
+#if defined(CONFIG_VERIFY_PERMISSION_FAULT)
+ /*
+ * Detect erroneous permission failures and fix
+ */
+ ldr r3, =0x40d @ On permission fault
+ and r3, r1, r3
+ cmp r3, #0x0d
+ movne pc, lr
+
+ mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR
+ isb
+ mrc p15, 0, r2, c7, c4, 0 @ Read the PAR
+ and r3, r2, #0x7b @ On translation fault
+ cmp r3, #0x0b
+ movne pc, lr
+ bic r1, r1, #0xf @ Fix up FSR FS[5:0]
+ and r2, r2, #0x7e
+ orr r1, r1, r2, LSR #1
+#endif
+
mov pc, lr
ENDPROC(v7_early_abort)
--- /dev/null
+/*
+ * arch/arm/include/asm/assembler.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains arm architecture specific defines
+ * for the different processors.
+ *
+ * Do not include any C declarations in this file - it is included by
+ * assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+#include <asm/domain.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define pull lsr
+#define push lsl
+#define get_byte_0 lsl #0
+#define get_byte_1 lsr #8
+#define get_byte_2 lsr #16
+#define get_byte_3 lsr #24
+#define put_byte_0 lsl #0
+#define put_byte_1 lsl #8
+#define put_byte_2 lsl #16
+#define put_byte_3 lsl #24
+#else
+#define pull lsl
+#define push lsr
+#define get_byte_0 lsr #24
+#define get_byte_1 lsr #16
+#define get_byte_2 lsr #8
+#define get_byte_3 lsl #0
+#define put_byte_0 lsl #24
+#define put_byte_1 lsl #16
+#define put_byte_2 lsl #8
+#define put_byte_3 lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...) code
+#else
+#define PLD(code...)
+#endif
+
+/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory. Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+/*
+ * Enable and disable interrupts
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+ .macro disable_irq_notrace
+ cpsid i
+ .endm
+
+ .macro enable_irq_notrace
+ cpsie i
+ .endm
+#else
+ .macro disable_irq_notrace
+ msr cpsr_c, #PSR_I_BIT | SVC_MODE
+ .endm
+
+ .macro enable_irq_notrace
+ msr cpsr_c, #SVC_MODE
+ .endm
+#endif
+
+ .macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ stmdb sp!, {r0-r3, ip, lr}
+ bl trace_hardirqs_off
+ ldmia sp!, {r0-r3, ip, lr}
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+ /*
+ * actually the registers should be pushed and pop'd conditionally, but
+ * after bl the flags are certainly clobbered
+ */
+ stmdb sp!, {r0-r3, ip, lr}
+ bl\cond trace_hardirqs_on
+ ldmia sp!, {r0-r3, ip, lr}
+#endif
+ .endm
+
+ .macro asm_trace_hardirqs_on
+ asm_trace_hardirqs_on_cond al
+ .endm
+
+ .macro disable_irq
+ disable_irq_notrace
+ asm_trace_hardirqs_off
+ .endm
+
+ .macro enable_irq
+ asm_trace_hardirqs_on
+ enable_irq_notrace
+ .endm
+/*
+ * Save the current IRQ state and disable IRQs. Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+ .macro save_and_disable_irqs, oldcpsr
+ mrs \oldcpsr, cpsr
+ disable_irq
+ .endm
+
+/*
+ * Restore interrupt state previously stored in a register. We don't
+ * guarantee that this will preserve the flags.
+ */
+ .macro restore_irqs_notrace, oldcpsr
+ msr cpsr_c, \oldcpsr
+ .endm
+
+ .macro restore_irqs, oldcpsr
+ tst \oldcpsr, #PSR_I_BIT
+ asm_trace_hardirqs_on_cond eq
+ restore_irqs_notrace \oldcpsr
+ .endm
+
+#define USER(x...) \
+9999: x; \
+ .pushsection __ex_table,"a"; \
+ .align 3; \
+ .long 9999b,9001f; \
+ .popsection
+
+#ifdef CONFIG_SMP
+#define ALT_SMP(instr...) \
+9998: instr
+/*
+ * Note: if you get assembler errors from ALT_UP() when building with
+ * CONFIG_THUMB2_KERNEL, you almost certainly need to use
+ * ALT_SMP( W(instr) ... )
+ */
+#define ALT_UP(instr...) \
+ .pushsection ".alt.smp.init", "a" ;\
+ .long 9998b ;\
+9997: instr ;\
+ .if . - 9997b != 4 ;\
+ .error "ALT_UP() content must assemble to exactly 4 bytes";\
+ .endif ;\
+ .popsection
+#define ALT_UP_B(label) \
+ .equ up_b_offset, label - 9998b ;\
+ .pushsection ".alt.smp.init", "a" ;\
+ .long 9998b ;\
+ W(b) . + up_b_offset ;\
+ .popsection
+#else
+#define ALT_SMP(instr...)
+#define ALT_UP(instr...) instr
+#define ALT_UP_B(label) b label
+#endif
+
+/*
+ * SMP data memory barrier
+ */
+ .macro smp_dmb mode
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+ .ifeqs "\mode","arm"
+ ALT_SMP(dmb)
+ .else
+ ALT_SMP(W(dmb))
+ .endif
+#elif __LINUX_ARM_ARCH__ == 6
+ ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb
+#else
+#error Incompatible SMP platform
+#endif
+ .ifeqs "\mode","arm"
+ ALT_UP(nop)
+ .else
+ ALT_UP(W(nop))
+ .endif
+#endif
+ .endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+ .macro setmode, mode, reg
+ mov \reg, #\mode
+ msr cpsr_c, \reg
+ .endm
+#else
+ .macro setmode, mode, reg
+ msr cpsr_c, #\mode
+ .endm
+#endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+ .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
+9999:
+ .if \inc == 1
+ \instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
+ .elseif \inc == 4
+ \instr\cond\()\t\().w \reg, [\ptr, #\off]
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .pushsection __ex_table,"a"
+ .align 3
+ .long 9999b, \abort
+ .popsection
+ .endm
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort
+ @ explicit IT instruction needed because of the label
+ @ introduced by the USER macro
+ .ifnc \cond,al
+ .if \rept == 1
+ itt \cond
+ .elseif \rept == 2
+ ittt \cond
+ .else
+ .error "Unsupported rept macro argument"
+ .endif
+ .endif
+
+ @ Slightly optimised to avoid incrementing the pointer twice
+ usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+ .if \rept == 2
+ usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
+ .endif
+
+ add\cond \ptr, #\rept * \inc
+ .endm
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
+ .rept \rept
+9999:
+ .if \inc == 1
+ \instr\cond\()b\()\t \reg, [\ptr], #\inc
+ .elseif \inc == 4
+ \instr\cond\()\t \reg, [\ptr], #\inc
+ .else
+ .error "Unsupported inc macro argument"
+ .endif
+
+ .pushsection __ex_table,"a"
+ .align 3
+ .long 9999b, \abort
+ .popsection
+ .endr
+ .endm
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+ .macro strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+ usracc str, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
+
+ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+ usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+ .endm
*/
#include <linux/linkage.h>
#include <linux/init.h>
-#include <asm/assembler.h>
+#include "assembler.h"
#include <asm/unwind.h>
#include "proc-macros.S"
+/*
+ * v7_flush_icache_all()
+ *
+ * Flush the whole I-cache.
+ *
+ * Registers:
+ * r0 - set to 0
+ */
+ENTRY(v7_flush_icache_all)
+ mov r0, #0
+ ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable
+ ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate
+ mov pc, lr
+ENDPROC(v7_flush_icache_all)
+
/*
* v7_flush_dcache_all()
*
* Flush the entire cache system.
* The data cache flush is now achieved using atomic clean / invalidates
* working outwards from L1 cache. This is done using Set/Way based cache
- * maintainance instructions.
+ * maintenance instructions.
* The instruction cache can still be invalidated back to the point of
* unification in a single instruction.
*
THUMB( stmfd sp!, {r4-r7, r9-r11, lr} )
bl v7_flush_dcache_all
mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+ ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable
+ ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate
ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} )
THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} )
mov pc, lr
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
- bic r0, r0, r3
+ bic r12, r0, r3
1:
- USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
+ USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
+ add r12, r12, r2
+ cmp r12, r1
+ blo 1b
dsb
- USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
- add r0, r0, r2
+ icache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
2:
- cmp r0, r1
- blo 1b
+ USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line
+ add r12, r12, r2
+ cmp r12, r1
+ blo 2b
+3:
mov r0, #0
- mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
+ ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable
+ ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB
dsb
isb
mov pc, lr
* isn't mapped, just try the next page.
*/
9001:
- mov r0, r0, lsr #12
- mov r0, r0, lsl #12
- add r0, r0, #4096
- b 2b
+ mov r12, r12, lsr #12
+ mov r12, r12, lsl #12
+ add r12, r12, #4096
+ b 3b
UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
/*
- * v7_flush_kern_dcache_page(kaddr)
+ * v7_flush_kern_dcache_area(void *addr, size_t size)
*
* Ensure that the data held in the page kaddr is written back
* to the page in question.
*
- * - kaddr - kernel address (guaranteed to be page aligned)
+ * - addr - kernel address
+ * - size - region size
*/
-ENTRY(v7_flush_kern_dcache_page)
+ENTRY(v7_flush_kern_dcache_area)
dcache_line_size r2, r3
- add r1, r0, #PAGE_SZ
+ add r1, r0, r1
1:
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line
add r0, r0, r2
blo 1b
dsb
mov pc, lr
-ENDPROC(v7_flush_kern_dcache_page)
+ENDPROC(v7_flush_kern_dcache_area)
/*
* v7_dma_inv_range(start,end)
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_inv_range)
+v7_dma_inv_range:
dcache_line_size r2, r3
sub r3, r2, #1
tst r0, r3
* - start - virtual start address of region
* - end - virtual end address of region
*/
-ENTRY(v7_dma_clean_range)
+v7_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
.type v7_cache_fns, #object
ENTRY(v7_cache_fns)
+ .long v7_flush_icache_all
.long v7_flush_kern_cache_all
.long v7_flush_user_cache_all
.long v7_flush_user_cache_range
.long v7_coherent_kern_range
.long v7_coherent_user_range
- .long v7_flush_kern_dcache_page
- .long v7_dma_inv_range
- .long v7_dma_clean_range
+ .long v7_flush_kern_dcache_area
.long v7_dma_flush_range
.size v7_cache_fns, . - v7_cache_fns
-/*
- * linux/arch/arm/mm/copypage-v6.c
- *
- * Copyright (C) 2002 Deep Blue Solutions Ltd, All Rights Reserved.
- * This Edition is maintained by Matthew Veety (aliasxerog) <mveety@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include "mm.h"
-#if SHMLBA > 16384
-#error FIX ME
-#endif
-
-#define from_address (0xffff8000)
-#define to_address (0xffffc000)
-
-/*
- * Copy the user page. No aliasing to deal with so we can just
- * attack the kernel's existing mapping of these pages.
- */
-
-static void v6_copy_user_highpage_nonaliasing(struct page *to,
- struct page *from, unsigned long vaddr)
-{
- void *kto, *kfrom;
-
- kfrom = kmap_atomic(from, KM_USER0);
- kto = kmap_atomic(to, KM_USER1);
- copy_page(kto, kfrom);
- kunmap_atomic(kto, KM_USER1);
- kunmap_atomic(kfrom, KM_USER0);
-}
-
-/*
- * Clear the user page. No aliasing to deal with so we can just
- * attack the kernel's existing mapping of this page.
- */
-static void v6_clear_user_highpage_nonaliasing(struct page *page, unsigned long vaddr)
-{
- void *kaddr = kmap_atomic(page, KM_USER0);
- clear_page(kaddr);
- kunmap_atomic(kaddr, KM_USER0);
-}
-
-
struct cpu_user_fns v6_user_fns __initdata = {
- .cpu_clear_user_highpage = v6_clear_user_highpage_nonaliasing,
- .cpu_copy_user_highpage = v6_copy_user_highpage_nonaliasing,
};
#ifndef CONFIG_THUMB2_KERNEL
.macro svc_exit, rpsr
msr spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
ldr r0, [sp]
strex r1, r2, [sp] @ clear the exclusive monitor
ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
+#elif defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#else
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#endif
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
-#if defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
strex r1, r2, [sp] @ clear the exclusive monitor
+#elif defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
.else
ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
.endif
+ mov r0, r0 @ ARMv5T and earlier require a nop
+ @ after ldm {}^
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
.endm
.endm
#endif /* !CONFIG_THUMB2_KERNEL */
+ @
+ @ Debug exceptions are taken as prefetch or data aborts.
+ @ We must disable preemption during the handler so that
+ @ we can access the debug registers safely.
+ @
+ .macro debug_entry, fsr
+#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
+ ldr r4, =0x40f @ mask out fsr.fs
+ and r5, r4, \fsr
+ cmp r5, #2 @ debug exception
+ bne 1f
+ get_thread_info r10
+ ldr r6, [r10, #TI_PREEMPT] @ get preempt count
+ add r11, r6, #1 @ increment it
+ str r11, [r10, #TI_PREEMPT]
+1:
+#endif
+ .endm
+
/*
* These are the registers used in the syscall handler, and allow us to
* have in theory up to 7 arguments to a function - r0 to r6.
--- /dev/null
+#ifndef __ASMARM_HWCAP_H
+#define __ASMARM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_SWP 1
+#define HWCAP_HALF 2
+#define HWCAP_THUMB 4
+#define HWCAP_26BIT 8 /* Play it safe */
+#define HWCAP_FAST_MULT 16
+#define HWCAP_FPA 32
+#define HWCAP_VFP 64
+#define HWCAP_EDSP 128
+#define HWCAP_JAVA 256
+#define HWCAP_IWMMXT 512
+#define HWCAP_CRUNCH 1024
+#define HWCAP_THUMBEE 2048
+#define HWCAP_NEON 4096
+#define HWCAP_VFPv3 8192
+#define HWCAP_VFPv3D16 16384
+#define HWCAP_TLS 32768
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP (elf_hwcap)
+extern unsigned int elf_hwcap;
+#endif
+
+#endif
{
kernel_restart_prepare(NULL);
printk(KERN_EMERG "Starting new kernel\n");
- machine_shutdown();
+ //machine_shutdown();
}
machine_kexec(kexec_image);
extern unsigned long kexec_mach_type;
extern unsigned long kexec_boot_atags;
+static atomic_t waiting_for_crash_ipi;
+
/*
* Provide a dummy crash_notes definition while crash dump arrives to arm.
* This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
{
}
-void machine_shutdown(void)
+void machine_crash_nonpanic_core(void *unused)
{
+ struct pt_regs regs;
+
+ crash_setup_regs(®s, NULL);
+ printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
+ smp_processor_id());
+ crash_save_cpu(®s, smp_processor_id());
+ flush_cache_all();
+
+ atomic_dec(&waiting_for_crash_ipi);
+ while (1)
+ cpu_relax();
}
void machine_crash_shutdown(struct pt_regs *regs)
{
+ unsigned long msecs;
+
+ local_irq_disable();
+
+ atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+ smp_call_function(machine_crash_nonpanic_core, NULL, false);
+ msecs = 1000; /* Wait at most a second for the other cpus to stop */
+ while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
+ mdelay(1);
+ msecs--;
+ }
+ if (atomic_read(&waiting_for_crash_ipi) > 0)
+ printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n");
+
+ crash_save_cpu(regs, smp_processor_id());
+
+ printk(KERN_INFO "Loading crashdump kernel...\n");
}
+/*
+ * Function pointer to optional machine-specific reinitialization
+ */
+void (*kexec_reinit)(void);
+
void machine_kexec(struct kimage *image)
{
unsigned long page_list;
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
- cpu_proc_fin();
+ if (kexec_reinit)
+ kexec_reinit();
+ local_irq_disable();
+ local_fiq_disable();
setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+ flush_cache_all();
+#if 0
+ outer_flush_all();
+ outer_disable();
+#endif
+ cpu_proc_fin();
+#if 0
+ outer_inv_all();
+#endif
+ flush_cache_all();
cpu_reset(reboot_code_buffer_phys);
}
--- /dev/null
+/*
+ * arch/arm/include/asm/pgtable.h
+ *
+ * Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <linux/const.h>
+#include <asm-generic/4level-fixup.h>
+#include <asm/proc-fns.h>
+
+#ifndef CONFIG_MMU
+
+#include "pgtable-nommu.h"
+
+#else
+
+#include <asm/memory.h>
+#include <mach/vmalloc.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * Note that platforms may override VMALLOC_START, but they must provide
+ * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space,
+ * which may not overlap IO space.
+ */
+#ifndef VMALLOC_START
+#define VMALLOC_OFFSET (8*1024*1024)
+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#endif
+
+/*
+ * Hardware-wise, we have a two level page table structure, where the first
+ * level has 4096 entries, and the second level has 256 entries. Each entry
+ * is one 32-bit word. Most of the bits in the second level entry are used
+ * by hardware, and there aren't any "accessed" and "dirty" bits.
+ *
+ * Linux on the other hand has a three level page table structure, which can
+ * be wrapped to fit a two level page table structure easily - using the PGD
+ * and PTE only. However, Linux also expects one "PTE" table per page, and
+ * at least a "dirty" bit.
+ *
+ * Therefore, we tweak the implementation slightly - we tell Linux that we
+ * have 2048 entries in the first level, each of which is 8 bytes (iow, two
+ * hardware pointers to the second level.) The second level contains two
+ * hardware PTE tables arranged contiguously, preceded by Linux versions
+ * which contain the state information Linux needs. We, therefore, end up
+ * with 512 entries in the "PTE" level.
+ *
+ * This leads to the page tables having the following layout:
+ *
+ * pgd pte
+ * | |
+ * +--------+
+ * | | +------------+ +0
+ * +- - - - + | Linux pt 0 |
+ * | | +------------+ +1024
+ * +--------+ +0 | Linux pt 1 |
+ * | |-----> +------------+ +2048
+ * +- - - - + +4 | h/w pt 0 |
+ * | |-----> +------------+ +3072
+ * +--------+ +8 | h/w pt 1 |
+ * | | +------------+ +4096
+ *
+ * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
+ * PTE_xxx for definitions of bits appearing in the "h/w pt".
+ *
+ * PMD_xxx definitions refer to bits in the first level page table.
+ *
+ * The "dirty" bit is emulated by only granting hardware write permission
+ * iff the page is marked "writable" and "dirty" in the Linux PTE. This
+ * means that a write to a clean page will cause a permission fault, and
+ * the Linux MM layer will mark the page dirty via handle_pte_fault().
+ * For the hardware to notice the permission change, the TLB entry must
+ * be flushed, and ptep_set_access_flags() does that for us.
+ *
+ * The "accessed" or "young" bit is emulated by a similar method; we only
+ * allow accesses to the page if the "young" bit is set. Accesses to the
+ * page will cause a fault, and handle_pte_fault() will set the young bit
+ * for us as long as the page is marked present in the corresponding Linux
+ * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is
+ * up to date.
+ *
+ * However, when the "young" bit is cleared, we deny access to the page
+ * by clearing the hardware PTE. Currently Linux does not flush the TLB
+ * for us in this case, which means the TLB will retain the transation
+ * until either the TLB entry is evicted under pressure, or a context
+ * switch which changes the user space mapping occurs.
+ */
+#define PTRS_PER_PTE 512
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PGD 2048
+
+#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t))
+#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PMD_SHIFT 21
+#define PGDIR_SHIFT 21
+
+#define LIBRARY_TEXT_START 0x0c000000
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, pte_t);
+extern void __pmd_error(const char *file, int line, pmd_t);
+extern void __pgd_error(const char *file, int line, pgd_t);
+
+#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte)
+#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd)
+#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd)
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * This is the lowest virtual address we can permit any user space
+ * mapping to be mapped at. This is particularly important for
+ * non-high vector CPUs.
+ */
+#define FIRST_USER_ADDRESS PAGE_SIZE
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT 20
+#define SECTION_SIZE (1UL << SECTION_SHIFT)
+#define SECTION_MASK (~(SECTION_SIZE-1))
+
+/*
+ * ARMv6 supersection address mask and size definitions.
+ */
+#define SUPERSECTION_SHIFT 24
+#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT)
+#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1))
+
+/*
+ * "Linux" PTE definitions.
+ *
+ * We keep two sets of PTEs - the hardware and the linux version.
+ * This allows greater flexibility in the way we map the Linux bits
+ * onto the hardware tables, and allows us to have YOUNG and DIRTY
+ * bits.
+ *
+ * The PTE table pointer refers to the hardware entries; the "Linux"
+ * entries are stored 1024 bytes below.
+ */
+#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0)
+#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1)
+#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */
+#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6)
+#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7)
+#define L_PTE_USER (_AT(pteval_t, 1) << 8)
+#define L_PTE_XN (_AT(pteval_t, 1) << 9)
+#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */
+
+/*
+ * These are the memory types, defined to be compatible with
+ * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB
+ */
+#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */
+#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */
+#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */
+#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */
+#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */
+#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */
+#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */
+#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */
+#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */
+#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
+#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable and bufferable bits based on memory policy,
+ * as well as any architecture dependent bits like global/ASID and SMP
+ * shared mapping bits.
+ */
+#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG
+
+extern pgprot_t pgprot_user;
+extern pgprot_t pgprot_kernel;
+
+#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
+
+#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY)
+#define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN)
+#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER)
+#define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define PAGE_COPY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
+#define PAGE_READONLY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
+#define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN)
+#define PAGE_KERNEL_EXEC pgprot_kernel
+
+#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
+#define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
+#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_COPY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
+#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_READONLY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
+
+#define __pgprot_modify(prot,mask,bits) \
+ __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
+#define pgprot_noncached(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
+#define pgprot_writecombine(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define pgprot_dmacoherent(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
+#else
+#define pgprot_dmacoherent(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED | L_PTE_XN)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version. These get translated into the best that the
+ * architecture can perform. Note that on most ARM hardware:
+ * 1) We cannot do execute protection
+ * 2) If we could do execute protection, then read is implied
+ * 3) write implies read permissions
+ */
+#define __P000 __PAGE_NONE
+#define __P001 __PAGE_READONLY
+#define __P010 __PAGE_COPY
+#define __P011 __PAGE_COPY
+#define __P100 __PAGE_READONLY_EXEC
+#define __P101 __PAGE_READONLY_EXEC
+#define __P110 __PAGE_COPY_EXEC
+#define __P111 __PAGE_COPY_EXEC
+
+#define __S000 __PAGE_NONE
+#define __S001 __PAGE_READONLY
+#define __S010 __PAGE_SHARED
+#define __S011 __PAGE_SHARED
+#define __S100 __PAGE_READONLY_EXEC
+#define __S101 __PAGE_READONLY_EXEC
+#define __S110 __PAGE_SHARED_EXEC
+#define __S111 __PAGE_SHARED_EXEC
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr) (empty_zero_page)
+
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr) ((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_present(pgd) (1)
+#define pgd_clear(pgdp) do { } while (0)
+#define set_pgd(pgd,pgdp) do { } while (0)
+#define set_pud(pud,pudp) do { } while (0)
+
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir, addr) ((pmd_t *)(dir))
+
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_present(pmd) (pmd_val(pmd))
+#define pmd_bad(pmd) (pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps) \
+ do { \
+ pmdpd[0] = pmdps[0]; \
+ pmdpd[1] = pmdps[1]; \
+ flush_pmd_entry(pmdpd); \
+ } while (0)
+
+#define pmd_clear(pmdp) \
+ do { \
+ pmdp[0] = __pmd(0); \
+ pmdp[1] = __pmd(0); \
+ clean_pmd_entry(pmdp); \
+ } while (0)
+
+static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+{
+ return __va(pmd_val(pmd) & PAGE_MASK);
+}
+
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end) (end)
+
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(pmd) pmd_page_vaddr(*(pmd))
+#define __pte_unmap(pte) do { } while (0)
+#else
+#define __pte_map(pmd) (pte_t *)kmap_atomic(pmd_page(*(pmd)))
+#define __pte_unmap(pte) kunmap_atomic(pte)
+#endif
+
+#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(pmd,addr) (pmd_page_vaddr(*(pmd)) + pte_index(addr))
+
+#define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr))
+#define pte_unmap(pte) __pte_unmap(pte)
+
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot))
+
+#define pte_page(pte) pfn_to_page(pte_pfn(pte))
+#define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
+
+#if __LINUX_ARM_ARCH__ < 6
+static inline void __sync_icache_dcache(pte_t pteval)
+{
+}
+#else
+extern void __sync_icache_dcache(pte_t pteval);
+#endif
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval)
+{
+ if (addr >= TASK_SIZE)
+ set_pte_ext(ptep, pteval, 0);
+ else {
+ __sync_icache_dcache(pteval);
+ set_pte_ext(ptep, pteval, PTE_EXT_NG);
+ }
+}
+
+#define pte_none(pte) (!pte_val(pte))
+#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY))
+#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN))
+#define pte_special(pte) (0)
+
+#define pte_present_user(pte) \
+ ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+ (L_PTE_PRESENT | L_PTE_USER))
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, |= L_PTE_RDONLY);
+PTE_BIT_FUNC(mkwrite, &= ~L_PTE_RDONLY);
+PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY);
+PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER;
+ pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+ return pte;
+}
+
+/*
+ * Encode and decode a swap entry. Swap entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <--------------- offset --------------------> <- type --> 0 0 0
+ *
+ * This gives us up to 63 swap files and 32GB per swap file. Note that
+ * the offset field is always non-zero.
+ */
+#define __SWP_TYPE_SHIFT 3
+#define __SWP_TYPE_BITS 6
+#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry. File entries are stored in the Linux
+ * page tables as follows:
+ *
+ * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * <----------------------- offset ------------------------> 1 0 0
+ */
+#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x) (pte_val(x) >> 3)
+#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS 29
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own arch_get_unmapped_area to cope with VIPT caches.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+ remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
+void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASMARM_PGTABLE_H */
.endm
/*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
*/
.macro dcache_line_size, reg, tmp
- mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR
- and \tmp, \tmp, #7 @ cache line size encoding
- mov \reg, #16 @ size offset
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ lsr \tmp, \tmp, #16
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro icache_line_size, reg, tmp
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
/*
* Sanity check the PTE configuration for the code below - which makes
- * certain assumptions about how these bits are layed out.
+ * certain assumptions about how these bits are laid out.
*/
#ifdef CONFIG_MMU
#if L_PTE_SHARED != PTE_EXT_SHARED
#error PTE shared bit mismatch
#endif
-#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
+#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
#error Invalid Linux PTE bit settings
#endif
* 110x 0 1 0 r/w r/o
* 11x0 0 1 0 r/w r/o
* 1111 0 1 1 r/w r/w
+ *
+ * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
+ * 110x 1 1 1 r/o r/o
+ * 11x0 1 1 1 r/o r/o
*/
.macro armv6_mt_table pfx
\pfx\()_mt_table:
.endm
.macro armv6_set_pte_ext pfx
- str r1, [r0], #-2048 @ linux version
+ str r1, [r0], #2048 @ linux version
bic r3, r1, #0x000003fc
bic r3, r3, #PTE_TYPE_MASK
and r2, r1, #L_PTE_MT_MASK
ldr r2, [ip, r2]
- tst r1, #L_PTE_WRITE
- tstne r1, #L_PTE_DIRTY
- orreq r3, r3, #PTE_EXT_APX
+ eor r1, r1, #L_PTE_DIRTY
+ tst r1, #L_PTE_DIRTY|L_PTE_RDONLY
+ orrne r3, r3, #PTE_EXT_APX
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+ @ allow kernel read/write access to read-only user pages
tstne r3, #PTE_EXT_APX
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
- tst r1, #L_PTE_EXEC
- orreq r3, r3, #PTE_EXT_XN
+ tst r1, #L_PTE_XN
+ orrne r3, r3, #PTE_EXT_XN
orr r3, r3, r2
* 1111 0xff r/w r/w
*/
.macro armv3_set_pte_ext wc_disable=1
- str r1, [r0], #-2048 @ linux version
+ str r1, [r0], #2048 @ linux version
- eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
bic r2, r2, #PTE_TYPE_MASK
tst r3, #L_PTE_USER @ user?
orrne r2, r2, #PTE_SMALL_AP_URO_SRW
- tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
+ tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty?
orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
bicne r2, r2, #PTE_BUFFERABLE
#endif
.endif
- str r2, [r0] @ hardware version
+ str r2, [r0] @ hardware version
.endm
* 1111 11 r/w r/w
*/
.macro xscale_set_pte_ext_prologue
- str r1, [r0], #-2048 @ linux version
+ str r1, [r0] @ linux version
- eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+ eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
bic r2, r1, #PTE_SMALL_AP_MASK @ keep C, B bits
orr r2, r2, #PTE_TYPE_EXT @ extended page
tst r3, #L_PTE_USER @ user?
orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
- tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
+ tst r3, #L_PTE_RDONLY | L_PTE_DIRTY @ write and dirty?
orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
@ combined with user -> user r/w
.endm
tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
movne r2, #0 @ no -> fault
- str r2, [r0] @ hardware version
+ str r2, [r0, #2048]! @ hardware version
mov ip, #0
mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
*/
#include <linux/init.h>
#include <linux/linkage.h>
-#include <asm/assembler.h>
+#include "hwcap.h"
+#include "assembler.h"
#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
+#include "pgtable.h"
#include "proc-macros.S"
#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
-#ifndef CONFIG_SMP
/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS PMD_SECT_WB
-#else
+#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP PMD_SECT_WB
+
/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S
-#endif
+#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S
ENTRY(cpu_v7_proc_init)
mov pc, lr
ENDPROC(cpu_v7_proc_init)
ENTRY(cpu_v7_proc_fin)
- stmfd sp!, {lr}
- cpsid if @ disable interrupts
- bl v7_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
- ldmfd sp!, {pc}
+ mov pc, lr
ENDPROC(cpu_v7_proc_fin)
/*
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
- *
- * It is assumed that:
*/
.align 5
ENTRY(cpu_v7_reset)
#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
- orr r0, r0, #TTB_FLAGS
+ ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP)
+ ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
#endif
* Set a level 2 translation table entry.
*
* - ptep - pointer to level 2 translation table entry
- * (hardware version is stored at -1024 bytes)
+ * (hardware version is stored at +2048 bytes)
* - pte - PTE value to store
* - ext - value for extended PTE bits
*/
ENTRY(cpu_v7_set_pte_ext)
#ifdef CONFIG_MMU
- ARM( str r1, [r0], #-2048 ) @ linux version
- THUMB( str r1, [r0] ) @ linux version
- THUMB( sub r0, r0, #2048 )
+ str r1, [r0] @ linux version
bic r3, r1, #0x000003f0
bic r3, r3, #PTE_TYPE_MASK
tst r1, #1 << 4
orrne r3, r3, #PTE_EXT_TEX(1)
- tst r1, #L_PTE_WRITE
- tstne r1, #L_PTE_DIRTY
- orreq r3, r3, #PTE_EXT_APX
+ eor r1, r1, #L_PTE_DIRTY
+ tst r1, #L_PTE_RDONLY | L_PTE_DIRTY
+ orrne r3, r3, #PTE_EXT_APX
tst r1, #L_PTE_USER
orrne r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+ @ allow kernel read/write access to read-only user pages
tstne r3, #PTE_EXT_APX
bicne r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
- tst r1, #L_PTE_EXEC
- orreq r3, r3, #PTE_EXT_XN
+ tst r1, #L_PTE_XN
+ orrne r3, r3, #PTE_EXT_XN
tst r1, #L_PTE_YOUNG
tstne r1, #L_PTE_PRESENT
moveq r3, #0
- str r3, [r0]
+ ARM( str r3, [r0, #2048]! )
+ THUMB( add r0, r0, #2048 )
+ THUMB( str r3, [r0] )
mcr p15, 0, r0, c7, c10, 1 @ flush_pte
#endif
mov pc, lr
.ascii "ARMv7 Processor"
.align
- __INIT
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+.equ PRRR, 0xff0a81a8
+.equ NMRR, 0x40e040e0
+
+/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
+.globl cpu_v7_suspend_size
+.equ cpu_v7_suspend_size, 4 * 8
+#if 0
+ENTRY(cpu_v7_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ TTB 0
+ mrc p15, 0, r8, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4 - r11, pc}
+ENDPROC(cpu_v7_do_suspend)
+
+ENTRY(cpu_v7_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ ldr r4, =PRRR @ PRRR
+ ldr r5, =NMRR @ NMRR
+ mcr p15, 0, r4, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r5, c10, c2, 1 @ write NMRR
+ isb
+ mov r0, r9 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v7_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v7_do_suspend 0
+#define cpu_v7_do_resume 0
+#endif
+
+ __CPUINIT
/*
* __v7_setup
* It is assumed that:
* - cache type register is implemented
*/
-__v7_setup:
+__v7_ca9mp_setup:
#ifdef CONFIG_SMP
- mrc p15, 0, r0, c1, c0, 1
+ ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
+ ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
#endif
+__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
- bne 2f
+ bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
- orr r0, r6, r5, lsr #20-4 @ combine variant and revision
+ orr r6, r6, r5, lsr #20-4 @ combine variant and revision
+ ubfx r0, r0, #4, #12 @ primary part number
+ /* Cortex-A8 Errata */
+ ldr r10, =0x00000c08 @ Cortex-A8 primary part number
+ teq r0, r10
+ bne 2f
#ifdef CONFIG_ARM_ERRATA_430973
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
- teq r0, #0x20 @ only present in r2p0
+ teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
- teq r0, #0x20 @ only present in r2p0
+ teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
+ b 3f
+
+ /* Cortex-A9 Errata */
+2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
+ teq r0, r10
+ bne 3f
+#ifdef CONFIG_ARM_ERRATA_742230
+ cmp r6, #0x22 @ only present up to r2p2
+ mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orrle r10, r10, #1 << 4 @ set bit #4
+ mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_742231
+ teq r6, #0x20 @ present in r2p0
+ teqne r6, #0x21 @ present in r2p1
+ teqne r6, #0x22 @ present in r2p2
+ mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orreq r10, r10, #1 << 12 @ set bit #12
+ orreq r10, r10, #1 << 22 @ set bit #22
+ mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_743622
+ teq r6, #0x20 @ present in r2p0
+ teqne r6, #0x21 @ present in r2p1
+ teqne r6, #0x22 @ present in r2p2
+ mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orreq r10, r10, #1 << 6 @ set bit #6
+ mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_751472
+ cmp r6, #0x30 @ present prior to r3p0
+ mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register
+ orrlt r10, r10, #1 << 11 @ set bit #11
+ mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register
+#endif
-2: mov r10, #0
+3: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
#ifdef CONFIG_MMU
mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r10, c2, c0, 2 @ TTB control register
- orr r4, r4, #TTB_FLAGS
+ ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
+ ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
- mov r10, #0x1f @ domains 0, 1 = manager
- mcr p15, 0, r10, c3, c0, 0 @ load domain access register
- /*
- * Memory region attributes with SCTLR.TRE=1
- *
- * n = TEX[0],C,B
- * TR = PRRR[2n+1:2n] - memory type
- * IR = NMRR[2n+1:2n] - inner cacheable property
- * OR = NMRR[2n+17:2n+16] - outer cacheable property
- *
- * n TR IR OR
- * UNCACHED 000 00
- * BUFFERABLE 001 10 00 00
- * WRITETHROUGH 010 10 10 10
- * WRITEBACK 011 10 11 11
- * reserved 110
- * WRITEALLOC 111 10 01 01
- * DEV_SHARED 100 01
- * DEV_NONSHARED 100 01
- * DEV_WC 001 10
- * DEV_CACHED 011 10
- *
- * Other attributes:
- *
- * DS0 = PRRR[16] = 0 - device shareable property
- * DS1 = PRRR[17] = 1 - device shareable property
- * NS0 = PRRR[18] = 0 - normal shareable property
- * NS1 = PRRR[19] = 1 - normal shareable property
- * NOS = PRRR[24+n] = 1 - not outer shareable
- */
- ldr r5, =0xff0a81a8 @ PRRR
- ldr r6, =0x40e040e0 @ NMRR
+ ldr r5, =PRRR @ PRRR
+ ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
ldmia r5, {r5, r6}
#ifdef CONFIG_CPU_ENDIAN_BE8
orr r6, r6, #1 << 25 @ big-endian page tables
+#endif
+#ifdef CONFIG_SWP_EMULATE
+ orr r5, r5, #(1 << 10) @ set SW bit in "clear"
+ bic r6, r6, #(1 << 10) @ clear it in "mmuset"
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
__v7_setup_stack:
.space 4 * 11 @ 11 registers
+ __INITDATA
+
.type v7_processor_functions, #object
ENTRY(v7_processor_functions)
.word v7_early_abort
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size v7_processor_functions, . - v7_processor_functions
+ .section ".rodata"
+
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv7"
.section ".proc.info.init", #alloc, #execinstr
+ .type __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+ .long 0x410fc090 @ Required ID value
+ .long 0xff0ffff0 @ Mask for ID
+ ALT_SMP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_FLAGS_SMP)
+ ALT_UP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_FLAGS_UP)
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ W(b) __v7_ca9mp_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
+ .long cpu_v7_name
+ .long v7_processor_functions
+ .long v7wbi_tlb_fns
+ .long v6_user_fns
+ .long v7_cache_fns
+ .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
/*
* Match any ARMv7 processor core.
*/
__v7_proc_info:
.long 0x000f0000 @ Required ID value
.long 0x000f0000 @ Mask for ID
- .long PMD_TYPE_SECT | \
+ ALT_SMP(.long \
+ PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \
+ PMD_FLAGS_SMP)
+ ALT_UP(.long \
+ PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ | \
- PMD_FLAGS
+ PMD_FLAGS_UP)
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_setup
+ W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
+ /*
+ * If there is no indirection page (we are doing crashdumps)
+ * skip any relocation.
+ */
+ cmp r0, #0
+ beq 2f
0: /* top, read another word for the indirection page */
ldr r3, [r0],#4
ldr r2,kexec_boot_atags
mov pc,lr
+ .align
+
.globl kexec_start_address
kexec_start_address:
.long 0x0
*/
#include <linux/init.h>
#include <linux/linkage.h>
+#include "assembler.h"
#include <asm/asm-offsets.h>
#include <asm/page.h>
-#include <asm/tlbflush.h>
+#include "tlbflush.h"
#include "proc-macros.S"
/*
asid r3, r3 @ mask ASID
orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
mov r1, r1, lsl #PAGE_SHIFT
- vma_vm_flags r2, r2 @ get vma->vm_flags
1:
-#ifdef CONFIG_SMP
- mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
-#else
- mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA
-#endif
+ ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable)
+ ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA
+
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
mov ip, #0
- mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
+ ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable
+ ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB
dsb
mov pc, lr
ENDPROC(v7wbi_flush_user_tlb_range)
mov r0, r0, lsl #PAGE_SHIFT
mov r1, r1, lsl #PAGE_SHIFT
1:
-#ifdef CONFIG_SMP
- mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
-#else
- mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA
-#endif
+ ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable)
+ ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
mov r2, #0
- mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+ ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable
+ ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB
dsb
isb
mov pc, lr
ENTRY(v7wbi_tlb_fns)
.long v7wbi_flush_user_tlb_range
.long v7wbi_flush_kern_tlb_range
- .long v7wbi_tlb_flags
+ ALT_SMP(.long v7wbi_tlb_flags_smp)
+ ALT_UP(.long v7wbi_tlb_flags_up)
.size v7wbi_tlb_fns, . - v7wbi_tlb_fns
--- /dev/null
+/*
+ * arch/arm/include/asm/tlbflush.h
+ *
+ * Copyright (C) 1999-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_TLBFLUSH_H
+#define _ASMARM_TLBFLUSH_H
+
+#ifdef CONFIG_MMU
+
+#include <asm/glue.h>
+
+#define TLB_V3_PAGE (1 << 0)
+#define TLB_V4_U_PAGE (1 << 1)
+#define TLB_V4_D_PAGE (1 << 2)
+#define TLB_V4_I_PAGE (1 << 3)
+#define TLB_V6_U_PAGE (1 << 4)
+#define TLB_V6_D_PAGE (1 << 5)
+#define TLB_V6_I_PAGE (1 << 6)
+
+#define TLB_V3_FULL (1 << 8)
+#define TLB_V4_U_FULL (1 << 9)
+#define TLB_V4_D_FULL (1 << 10)
+#define TLB_V4_I_FULL (1 << 11)
+#define TLB_V6_U_FULL (1 << 12)
+#define TLB_V6_D_FULL (1 << 13)
+#define TLB_V6_I_FULL (1 << 14)
+
+#define TLB_V6_U_ASID (1 << 16)
+#define TLB_V6_D_ASID (1 << 17)
+#define TLB_V6_I_ASID (1 << 18)
+
+#define TLB_BTB (1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE (1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
+/* Inner Shareable BTB operation (ARMv7 MP extensions) */
+#define TLB_V7_IS_BTB (1 << 22)
+
+#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
+#define TLB_DCLEAN (1 << 30)
+#define TLB_WB (1 << 31)
+
+/*
+ * MMU TLB Model
+ * =============
+ *
+ * We have the following to choose from:
+ * v3 - ARMv3
+ * v4 - ARMv4 without write buffer
+ * v4wb - ARMv4 with write buffer without I TLB flush entry instruction
+ * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ * fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
+ * fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB))
+ * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ * v7wbi - identical to v6wbi
+ */
+#undef _TLB
+#undef MULTI_TLB
+
+#ifdef CONFIG_SMP_ON_UP
+#define MULTI_TLB 1
+#endif
+
+#define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V3
+# define v3_possible_flags v3_tlb_flags
+# define v3_always_flags v3_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v3
+# endif
+#else
+# define v3_possible_flags 0
+# define v3_always_flags (-1UL)
+#endif
+
+#define v4_tlb_flags (TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WT
+# define v4_possible_flags v4_tlb_flags
+# define v4_always_flags v4_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v4
+# endif
+#else
+# define v4_possible_flags 0
+# define v4_always_flags (-1UL)
+#endif
+
+#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \
+ TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FA
+# define fa_possible_flags fa_tlb_flags
+# define fa_always_flags fa_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB fa
+# endif
+#else
+# define fa_possible_flags 0
+# define fa_always_flags (-1UL)
+#endif
+
+#define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+ TLB_V4_I_FULL | TLB_V4_D_FULL | \
+ TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WBI
+# define v4wbi_possible_flags v4wbi_tlb_flags
+# define v4wbi_always_flags v4wbi_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v4wbi
+# endif
+#else
+# define v4wbi_possible_flags 0
+# define v4wbi_always_flags (-1UL)
+#endif
+
+#define fr_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
+ TLB_V4_I_FULL | TLB_V4_D_FULL | \
+ TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FEROCEON
+# define fr_possible_flags fr_tlb_flags
+# define fr_always_flags fr_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v4wbi
+# endif
+#else
+# define fr_possible_flags 0
+# define fr_always_flags (-1UL)
+#endif
+
+#define v4wb_tlb_flags (TLB_WB | TLB_DCLEAN | \
+ TLB_V4_I_FULL | TLB_V4_D_FULL | \
+ TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WB
+# define v4wb_possible_flags v4wb_tlb_flags
+# define v4wb_always_flags v4wb_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v4wb
+# endif
+#else
+# define v4wb_possible_flags 0
+# define v4wb_always_flags (-1UL)
+#endif
+
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+ TLB_V6_I_FULL | TLB_V6_D_FULL | \
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
+ TLB_V6_I_ASID | TLB_V6_D_ASID)
+
+#ifdef CONFIG_CPU_TLB_V6
+# define v6wbi_possible_flags v6wbi_tlb_flags
+# define v6wbi_always_flags v6wbi_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v6wbi
+# endif
+#else
+# define v6wbi_possible_flags 0
+# define v6wbi_always_flags (-1UL)
+#endif
+
+#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
+ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+
+#ifdef CONFIG_CPU_TLB_V7
+
+# ifdef CONFIG_SMP_ON_UP
+# define v7wbi_possible_flags (v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up)
+# define v7wbi_always_flags (v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up)
+# elif defined(CONFIG_SMP)
+# define v7wbi_possible_flags v7wbi_tlb_flags_smp
+# define v7wbi_always_flags v7wbi_tlb_flags_smp
+# else
+# define v7wbi_possible_flags v7wbi_tlb_flags_up
+# define v7wbi_always_flags v7wbi_tlb_flags_up
+# endif
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v7wbi
+# endif
+#else
+# define v7wbi_possible_flags 0
+# define v7wbi_always_flags (-1UL)
+#endif
+
+#ifndef _TLB
+#error Unknown TLB model
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+struct cpu_tlb_fns {
+ void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
+ void (*flush_kern_range)(unsigned long, unsigned long);
+ unsigned long tlb_flags;
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_TLB
+
+#define __cpu_flush_user_tlb_range cpu_tlb.flush_user_range
+#define __cpu_flush_kern_tlb_range cpu_tlb.flush_kern_range
+
+#else
+
+#define __cpu_flush_user_tlb_range __glue(_TLB,_flush_user_tlb_range)
+#define __cpu_flush_kern_tlb_range __glue(_TLB,_flush_kern_tlb_range)
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+#endif
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_tlb_flags cpu_tlb.tlb_flags
+
+/*
+ * TLB Management
+ * ==============
+ *
+ * The arch/arm/mm/tlb-*.S files implement these methods.
+ *
+ * The TLB specific code is expected to perform whatever tests it
+ * needs to determine if it should invalidate the TLB for each
+ * call. Start addresses are inclusive and end addresses are
+ * exclusive; it is safe to round these addresses down.
+ *
+ * flush_tlb_all()
+ *
+ * Invalidate the entire TLB.
+ *
+ * flush_tlb_mm(mm)
+ *
+ * Invalidate all TLB entries in a particular address
+ * space.
+ * - mm - mm_struct describing address space
+ *
+ * flush_tlb_range(mm,start,end)
+ *
+ * Invalidate a range of TLB entries in the specified
+ * address space.
+ * - mm - mm_struct describing address space
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ *
+ * flush_tlb_page(vaddr,vma)
+ *
+ * Invalidate the specified page in the specified address range.
+ * - vaddr - virtual address (may not be aligned)
+ * - vma - vma_struct describing address range
+ *
+ * flush_kern_tlb_page(kaddr)
+ *
+ * Invalidate the TLB entry for the specified page. The address
+ * will be in the kernels virtual memory space. Current uses
+ * only require the D-TLB to be invalidated.
+ * - kaddr - Kernel virtual memory address
+ */
+
+/*
+ * We optimise the code below by:
+ * - building a set of TLB flags that might be set in __cpu_tlb_flags
+ * - building a set of TLB flags that will always be set in __cpu_tlb_flags
+ * - if we're going to need __cpu_tlb_flags, access it once and only once
+ *
+ * This allows us to build optimal assembly for the single-CPU type case,
+ * and as close to optimal given the compiler constrants for multi-CPU
+ * case. We could do better for the multi-CPU case if the compiler
+ * implemented the "%?" method, but this has been discontinued due to too
+ * many people getting it wrong.
+ */
+#define possible_tlb_flags (v3_possible_flags | \
+ v4_possible_flags | \
+ v4wbi_possible_flags | \
+ fr_possible_flags | \
+ v4wb_possible_flags | \
+ fa_possible_flags | \
+ v6wbi_possible_flags | \
+ v7wbi_possible_flags)
+
+#define always_tlb_flags (v3_always_flags & \
+ v4_always_flags & \
+ v4wbi_always_flags & \
+ fr_always_flags & \
+ v4wb_always_flags & \
+ fa_always_flags & \
+ v6wbi_always_flags & \
+ v7wbi_always_flags)
+
+#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
+
+static inline void local_flush_tlb_all(void)
+{
+ const int zero = 0;
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+ if (tlb_flag(TLB_V3_FULL))
+ asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
+ asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
+ asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
+ asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V7_UIS_FULL))
+ asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+
+ if (tlb_flag(TLB_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+ const int zero = 0;
+ const int asid = ASID(mm);
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+ if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
+ if (tlb_flag(TLB_V3_FULL))
+ asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V4_U_FULL))
+ asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V4_D_FULL))
+ asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V4_I_FULL))
+ asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+ }
+ put_cpu();
+
+ if (tlb_flag(TLB_V6_U_ASID))
+ asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
+ if (tlb_flag(TLB_V6_D_ASID))
+ asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
+ if (tlb_flag(TLB_V6_I_ASID))
+ asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+ if (tlb_flag(TLB_V7_UIS_ASID))
+#ifdef CONFIG_ARM_ERRATA_720789
+ asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+#else
+ asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
+#endif
+
+ if (tlb_flag(TLB_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+ const int zero = 0;
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+ if (tlb_flag(TLB_V3_PAGE))
+ asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V4_U_PAGE))
+ asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V4_D_PAGE))
+ asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V4_I_PAGE))
+ asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+ if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+ asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+ }
+
+ if (tlb_flag(TLB_V6_U_PAGE))
+ asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V6_D_PAGE))
+ asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V6_I_PAGE))
+ asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V7_UIS_PAGE))
+#ifdef CONFIG_ARM_ERRATA_720789
+ asm("mcr p15, 0, %0, c8, c3, 3" : : "r" (uaddr & PAGE_MASK) : "cc");
+#else
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
+#endif
+
+ if (tlb_flag(TLB_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+ const int zero = 0;
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ kaddr &= PAGE_MASK;
+
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+ if (tlb_flag(TLB_V3_PAGE))
+ asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V4_U_PAGE))
+ asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V4_D_PAGE))
+ asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V4_I_PAGE))
+ asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+ if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+ asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+ if (tlb_flag(TLB_V6_U_PAGE))
+ asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V6_D_PAGE))
+ asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V6_I_PAGE))
+ asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V7_UIS_PAGE))
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
+
+ if (tlb_flag(TLB_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
+ if (tlb_flag(TLB_V7_IS_BTB)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
+}
+
+/*
+ * flush_pmd_entry
+ *
+ * Flush a PMD entry (word aligned, or double-word aligned) to
+ * RAM if the TLB for the CPU we are running on requires this.
+ * This is typically used when we are creating PMD entries.
+ *
+ * clean_pmd_entry
+ *
+ * Clean (but don't drain the write buffer) if the CPU requires
+ * these operations. This is typically used when we are removing
+ * PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ if (tlb_flag(TLB_DCLEAN))
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
+ : : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_L2CLEAN_FR))
+ asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd"
+ : : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_WB))
+ dsb();
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ if (tlb_flag(TLB_DCLEAN))
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
+ : : "r" (pmd) : "cc");
+
+ if (tlb_flag(TLB_L2CLEAN_FR))
+ asm("mcr p15, 1, %0, c15, c9, 1 @ L2 flush_pmd"
+ : : "r" (pmd) : "cc");
+}
+
+#undef tlb_flag
+#undef always_tlb_flags
+#undef possible_tlb_flags
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define local_flush_tlb_range(vma,start,end) __cpu_flush_user_tlb_range(start,end,vma)
+#define local_flush_tlb_kernel_range(s,e) __cpu_flush_kern_tlb_range(s,e)
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all local_flush_tlb_all
+#define flush_tlb_mm local_flush_tlb_mm
+#define flush_tlb_page local_flush_tlb_page
+#define flush_tlb_kernel_page local_flush_tlb_kernel_page
+#define flush_tlb_range local_flush_tlb_range
+#define flush_tlb_kernel_range local_flush_tlb_kernel_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
+extern void flush_tlb_kernel_page(unsigned long kaddr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
+
+/*
+ * If PG_dcache_clean is not set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page. On ARMv6 and later, the cache coherency is handled via
+ * the set_pte_at() function.
+ */
+#if __LINUX_ARM_ARCH__ < 6
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep);
+#else
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+}
+#endif
+
+#endif
+
+#endif /* CONFIG_MMU */
+
+#endif
projects / ms2-kexec / commitdiff