]>
Commit | Line | Data |
---|---|---|
21452811 | 1 | --[[ |
2 | These are command definitions. This file should correspond exactly to usb_cmd.h. | |
3 | --]] | |
4 | --// For the bootloader | |
5 | local _commands = { | |
6 | CMD_DEVICE_INFO = 0x0000, | |
7 | CMD_SETUP_WRITE = 0x0001, | |
8 | CMD_FINISH_WRITE = 0x0003, | |
9 | CMD_HARDWARE_RESET = 0x0004, | |
10 | CMD_START_FLASH = 0x0005, | |
11 | CMD_NACK = 0x00fe, | |
12 | CMD_ACK = 0x00ff, | |
13 | ||
14 | --// For general mucking around | |
15 | CMD_DEBUG_PRINT_STRING = 0x0100, | |
16 | CMD_DEBUG_PRINT_INTEGERS = 0x0101, | |
17 | CMD_DEBUG_PRINT_BYTES = 0x0102, | |
18 | CMD_LCD_RESET = 0x0103, | |
19 | CMD_LCD = 0x0104, | |
20 | CMD_BUFF_CLEAR = 0x0105, | |
21 | CMD_READ_MEM = 0x0106, | |
22 | CMD_VERSION = 0x0107, | |
e2012d1b MHS |
23 | CMD_STATUS = 0x0108, |
24 | CMD_PING = 0x0109, | |
21452811 | 25 | --// For low-frequency tags |
26 | CMD_READ_TI_TYPE = 0x0202, | |
27 | CMD_WRITE_TI_TYPE = 0x0203, | |
28 | CMD_DOWNLOADED_RAW_BITS_TI_TYPE = 0x0204, | |
29 | CMD_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0205, | |
30 | CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K = 0x0206, | |
31 | CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K = 0x0207, | |
32 | CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K = 0x0208, | |
33 | CMD_DOWNLOADED_SIM_SAMPLES_125K = 0x0209, | |
34 | CMD_SIMULATE_TAG_125K = 0x020A, | |
35 | CMD_HID_DEMOD_FSK = 0x020B, | |
36 | CMD_HID_SIM_TAG = 0x020C, | |
37 | CMD_SET_LF_DIVISOR = 0x020D, | |
38 | CMD_LF_SIMULATE_BIDIR = 0x020E, | |
39 | CMD_SET_ADC_MUX = 0x020F, | |
40 | CMD_HID_CLONE_TAG = 0x0210, | |
41 | CMD_EM410X_WRITE_TAG = 0x0211, | |
42 | CMD_INDALA_CLONE_TAG = 0x0212, | |
43 | --// for 224 bits UID | |
44 | CMD_INDALA_CLONE_TAG_L = 0x0213, | |
45 | CMD_T55XX_READ_BLOCK = 0x0214, | |
46 | CMD_T55XX_WRITE_BLOCK = 0x0215, | |
66837a03 | 47 | CMD_T55XX_RESET_READ = 0x0216, |
21452811 | 48 | CMD_PCF7931_READ = 0x0217, |
49 | CMD_EM4X_READ_WORD = 0x0218, | |
50 | CMD_EM4X_WRITE_WORD = 0x0219, | |
66707a3b | 51 | CMD_IO_DEMOD_FSK = 0x021A, |
abd6112f | 52 | CMD_IO_CLONE_TAG = 0x021B, |
53 | CMD_EM410X_DEMOD = 0x021c, | |
54 | CMD_SET_LF_SAMPLING_CONFIG = 0x021d, | |
55 | CMD_FSK_SIM_TAG = 0x021E, | |
56 | CMD_ASK_SIM_TAG = 0x021F, | |
872e3d4d | 57 | CMD_PSK_SIM_TAG = 0x0220, |
c0c35f9b | 58 | CMD_AWID_DEMOD_FSK = 0x0221, |
709665b5 | 59 | CMD_VIKING_CLONE_TAG = 0x0223, |
be2d41b7 | 60 | CMD_T55XX_WAKEUP = 0x0224, |
e04475c4 | 61 | CMD_COTAG = 0x0225, |
21452811 | 62 | --/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */ |
63 | ||
64 | --// For the 13.56 MHz tags | |
65 | CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 = 0x0300, | |
21452811 | 66 | CMD_READ_SRI512_TAG = 0x0303, |
67 | CMD_READ_SRIX4K_TAG = 0x0304, | |
68 | CMD_READER_ISO_15693 = 0x0310, | |
69 | CMD_SIMTAG_ISO_15693 = 0x0311, | |
70 | CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 = 0x0312, | |
71 | CMD_ISO_15693_COMMAND = 0x0313, | |
72 | CMD_ISO_15693_COMMAND_DONE = 0x0314, | |
73 | CMD_ISO_15693_FIND_AFI = 0x0315, | |
74 | CMD_ISO_15693_DEBUG = 0x0316, | |
3af373f3 | 75 | CMD_LF_SNOOP_RAW_ADC_SAMPLES = 0x0317, |
21452811 | 76 | |
77 | --// For Hitag2 transponders | |
78 | CMD_SNOOP_HITAG = 0x0370, | |
79 | CMD_SIMULATE_HITAG = 0x0371, | |
80 | CMD_READER_HITAG = 0x0372, | |
81 | ||
132a0217 | 82 | CMD_SIMULATE_TAG_ISO_14443B = 0x0381, |
83 | CMD_SNOOP_ISO_14443B = 0x0382, | |
21452811 | 84 | CMD_SNOOP_ISO_14443a = 0x0383, |
85 | CMD_SIMULATE_TAG_ISO_14443a = 0x0384, | |
86 | CMD_READER_ISO_14443a = 0x0385, | |
87 | CMD_SIMULATE_TAG_LEGIC_RF = 0x0387, | |
88 | CMD_READER_LEGIC_RF = 0x0388, | |
89 | CMD_WRITER_LEGIC_RF = 0x0389, | |
90 | CMD_EPA_PACE_COLLECT_NONCE = 0x038A, | |
3af373f3 | 91 | --//CMD_EPA_ = 0x038B, |
21452811 | 92 | |
3ac22ee1 | 93 | CMD_ICLASS_READCHECK = 0x038F, |
aa53efc3 | 94 | CMD_ICLASS_CLONE = 0x0390, |
95 | CMD_ICLASS_DUMP = 0x0391, | |
21452811 | 96 | CMD_SNOOP_ICLASS = 0x0392, |
97 | CMD_SIMULATE_TAG_ICLASS = 0x0393, | |
98 | CMD_READER_ICLASS = 0x0394, | |
aa53efc3 | 99 | CMD_READER_ICLASS_REPLAY = 0x0395, |
100 | CMD_ICLASS_READBLOCK = 0x0396, | |
101 | CMD_ICLASS_WRITEBLOCK = 0x0397, | |
102 | CMD_ICLASS_EML_MEMSET = 0x0398, | |
103 | CMD_ICLASS_AUTHENTICATION = 0x0399, | |
21452811 | 104 | |
105 | --// For measurements of the antenna tuning | |
106 | CMD_MEASURE_ANTENNA_TUNING = 0x0400, | |
107 | CMD_MEASURE_ANTENNA_TUNING_HF = 0x0401, | |
108 | CMD_MEASURED_ANTENNA_TUNING = 0x0410, | |
109 | CMD_LISTEN_READER_FIELD = 0x0420, | |
110 | ||
111 | --// For direct FPGA control | |
112 | CMD_FPGA_MAJOR_MODE_OFF = 0x0500, | |
113 | ||
114 | --// For mifare commands | |
115 | CMD_MIFARE_SET_DBGMODE = 0x0600, | |
116 | CMD_MIFARE_EML_MEMCLR = 0x0601, | |
117 | CMD_MIFARE_EML_MEMSET = 0x0602, | |
118 | CMD_MIFARE_EML_MEMGET = 0x0603, | |
119 | CMD_MIFARE_EML_CARDLOAD = 0x0604, | |
b915fda3 | 120 | |
121 | --// magic chinese card commands | |
122 | CMD_MIFARE_CSETBLOCK = 0x0605, | |
123 | CMD_MIFARE_CGETBLOCK = 0x0606, | |
124 | CMD_MIFARE_CIDENT = 0x0607, | |
21452811 | 125 | |
126 | CMD_SIMULATE_MIFARE_CARD = 0x0610, | |
127 | ||
128 | CMD_READER_MIFARE = 0x0611, | |
129 | CMD_MIFARE_NESTED = 0x0612, | |
130 | ||
131 | CMD_MIFARE_READBL = 0x0620, | |
3af373f3 | 132 | CMD_MIFAREU_READBL = 0x0720, |
133 | ||
21452811 | 134 | CMD_MIFARE_READSC = 0x0621, |
3af373f3 | 135 | CMD_MIFAREU_READCARD = 0x0721, |
136 | ||
21452811 | 137 | CMD_MIFARE_WRITEBL = 0x0622, |
3af373f3 | 138 | CMD_MIFAREU_WRITEBL = 0x0722, |
139 | CMD_MIFAREU_WRITEBL_COMPAT = 0x0723, | |
140 | ||
21452811 | 141 | CMD_MIFARE_CHKKEYS = 0x0623, |
142 | ||
143 | CMD_MIFARE_SNIFFER = 0x0630, | |
144 | ||
3af373f3 | 145 | --//ultralightC |
9d87eb66 | 146 | CMD_MIFAREUC_AUTH = 0x0724, |
147 | CMD_MIFAREUC_SETPWD = 0x0727, | |
148 | CMD_MIFAREU_SETUID = 0x0728, | |
3af373f3 | 149 | |
150 | --// mifare desfire | |
151 | CMD_MIFARE_DESFIRE_READBL = 0x0728, | |
152 | CMD_MIFARE_DESFIRE_WRITEBL = 0x0729, | |
153 | CMD_MIFARE_DESFIRE_AUTH1 = 0x072a, | |
154 | CMD_MIFARE_DESFIRE_AUTH2 = 0x072b, | |
155 | CMD_MIFARE_DES_READER = 0x072c, | |
156 | CMD_MIFARE_DESFIRE_INFO = 0x072d, | |
157 | CMD_MIFARE_DESFIRE = 0x072e, | |
158 | ||
21452811 | 159 | CMD_UNKNOWN = 0xFFFF, |
160 | } | |
161 | ||
162 | ||
163 | local _reverse_lookup,k,v = {} | |
9ccfb3a8 | 164 | for k, v in pairs(_commands) do |
165 | _reverse_lookup[v] = k | |
166 | end | |
167 | _commands.tostring = function(command) | |
21452811 | 168 | if(type(command) == 'number') then |
169 | return ("%s (%d)"):format(_reverse_lookup[command]or "ERROR UNDEFINED!", command) | |
170 | end | |
171 | return ("Error, numeric argument expected, got : %s"):format(tostring(command)) | |
172 | end | |
173 | ||
174 | Command = { | |
175 | ||
176 | new = function(self, o) | |
177 | ||
178 | local o = o or {} -- create object if user does not provide one | |
179 | setmetatable(o, self) -- DIY inheritance a'la javascript | |
180 | self.__index = self | |
181 | ||
182 | o.cmd = o.cmd or _commands.CMD_UNKNOWN | |
183 | --o.arg1 = "test" | |
184 | o.arg1 = o.arg1 or 0 | |
185 | o.arg2 = o.arg2 or 0 | |
186 | o.arg3 = o.arg3 or 0 | |
187 | local data = o.data or "0" | |
188 | ||
189 | if(type(data) == 'string') then | |
190 | -- We need to check if it is correct length, otherwise pad it | |
191 | local len = string.len(data) | |
192 | if(len < 1024) then | |
193 | --Should be 1024 hex characters to represent 512 bytes of data | |
194 | data = data .. string.rep("0",1024 - len ) | |
195 | end | |
196 | if(len > 1024) then | |
197 | -- OOps, a bit too much data here | |
198 | print( ( "WARNING: data size too large, was %s chars, will be truncated "):format(len) ) | |
199 | -- | |
200 | data = data:sub(1,1024) | |
201 | end | |
202 | else | |
203 | print(("WARNING; data was NOT a (hex-) string, but was %s"):format(type(data))) | |
204 | end | |
205 | o.data = data | |
206 | ||
207 | return o | |
208 | end, | |
4df3eb3f | 209 | parse = function (packet) |
210 | local count,cmd,arg1,arg2,arg3,data = bin.unpack('LLLLH512',packet) | |
211 | return Command:new{cmd = cmd, arg1 = arg1, arg2 = arg2, arg3 = arg3, data = data} | |
212 | end, | |
21452811 | 213 | } |
214 | function Command:__tostring() | |
215 | local output = ("%s\r\nargs : (%s, %s, %s)\r\ndata:\r\n%s\r\n"):format( | |
216 | _commands.tostring(self.cmd), | |
217 | tostring(self.arg1), | |
218 | tostring(self.arg2), | |
219 | tostring(self.arg3), | |
220 | tostring(self.data)) | |
221 | return output | |
222 | end | |
223 | function Command:getBytes() | |
224 | --If a hex-string has been used | |
225 | local data = self.data | |
226 | local cmd = self.cmd | |
227 | local arg1, arg2, arg3 = self.arg1, self.arg2, self.arg3 | |
9ccfb3a8 | 228 | return bin.pack("LLLLH",cmd, arg1, arg2, arg3, data); |
21452811 | 229 | end |
abd6112f | 230 | return _commands |