]> git.zerfleddert.de Git - proxmark3-svn/blob - tools/at91sam7s256-jtagkey.cfg
ADD: a markdown file for the readme.txt file. I want to be able to show the build...
[proxmark3-svn] / tools / at91sam7s256-jtagkey.cfg
1 #define our ports
2 telnet_port 4444
3 gdb_port 3333
4
5 #commands specific to the Amontec JTAGKey
6 interface ft2232
7 ft2232_device_desc "Amontec JTAGkey A"
8 ft2232_layout jtagkey
9 ft2232_vid_pid 0x0403 0xcff8
10 jtag_khz 200
11 jtag_nsrst_delay 200
12 jtag_ntrst_delay 200
13
14 #reset_config <signals> [combination] [trst_type] [srst_type]
15 reset_config srst_only srst_pulls_trst
16
17 jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
18
19 target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi
20
21 gdb_memory_map enable
22
23 sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
24 flash bank at91sam7 0x100000 0x40000 0 4 sam7x256.cpu
Impressum, Datenschutz